Guvanthi Abeysinghe Mudiyanselage
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Guvanthi Abeysinghe Mudiyanselage has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Ali Emadi
Department of Electrical and Computer Engineering and McMaster Automotive Resource Centre (MARC), McMaster University, Hamilton, ON L8S 4L8, Canada
7 shared publications - Kyle Kozielski
McMaster University
4 shared publications - Chang Liu
McMaster University
2 shared publications - Giorgio Pietrini
McMaster Automotive Resource Centre (MARC), McMaster University, Hamilton, ON, Canada
2 shared publications - Linke Zhou
McMaster Automotive Resource Centre (MARC), McMaster University, Hamilton, ON, Canada
2 shared publications - Niloufar Keshmiri
McMaster Automotive Resource Centre (MARC), McMaster University, Hamilton, ON, Canada
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 172159-172174
DC-Link Ripple-Based Power-Signal Co-Transmission With Space Vector Modulation in Three-Phase Inverters for EVs
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 172159-172174
Open AccessDC-Link Ripple-Based Power-Signal Co-Transmission With Space Vector Modulation in Three-Phase Inverters for EVs
- Open Access
- 8 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 6, 1347-1370
A Review of Three-Port Integrated On-Board Charger and Auxiliary Power Module in Electric Medium- and Heavy-Duty Vehicles
Electric medium- and heavy-duty vehicles (eMHDVs), compared to their gasoline counterparts, are a promising solution in alleviating the global dependence of fossil fuel energy usage in the transportation sector. However, increased vehicle mass due to energy storage and powertrain upgrades require research and development efforts to improve eMHDV performance. Addressing power and voltage requirements of the powertrain, HV battery, and auxiliary loads can facilitate a bridge towards the metrics of conventional MHDV builds. DC-DC converters utilized in the on-board charger (OBC) and auxiliary power module (APM) of an eMHDV are therefore the focal point of this article, wherein a three-port converter (TPC) arises. To lay foundation, opportunities for OBCs across the wide spectrum of eMHDV models, vocations, and masses are identified through a study based on available specifications from 93 state-of-the-art (SOA) vehicle models, combined with 23,000 days of fleet data. OBCs are deemed feasible for eMHDVs due to long available off-shift charging times coupled with SOA battery capacities. Elevated power requirements of high-voltage and low-voltage auxiliaries in eMHDVs are also outlined. Then, TPCs are compared to conventional DC-DC converter solutions in terms of volume, efficiency, and cost. Despite elevated OBC and APM power requirements, TPCs are concluded to not be a limitation in eMHDV applications. Finally, a topological based review of SOA TPCs is performed outlining key technological gaps, design requirements and recommendations, and future research required for expansion to eMHDVs.
- 8 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 6, 1347-1370
Open AccessA Review of Three-Port Integrated On-Board Charger and Auxiliary Power Module in Electric Medium- and Heavy-Duty Vehicles
Electric medium- and heavy-duty vehicles (eMHDVs), compared to their gasoline counterparts, are a promising solution in alleviating the global dependence of fossil fuel energy usage in the transportation sector. However, increased vehicle mass due to energy storage and powertrain upgrades require research and development efforts to improve eMHDV performance. Addressing power and voltage requirements of the powertrain, HV battery, and auxiliary loads can facilitate a bridge towards the metrics of conventional MHDV builds. DC-DC converters utilized in the on-board charger (OBC) and auxiliary power module (APM) of an eMHDV are therefore the focal point of this article, wherein a three-port converter (TPC) arises. To lay foundation, opportunities for OBCs across the wide spectrum of eMHDV models, vocations, and masses are identified through a study based on available specifications from 93 state-of-the-art (SOA) vehicle models, combined with 23,000 days of fleet data. OBCs are deemed feasible for eMHDVs due to long available off-shift charging times coupled with SOA battery capacities. Elevated power requirements of high-voltage and low-voltage auxiliaries in eMHDVs are also outlined. Then, TPCs are compared to conventional DC-DC converter solutions in terms of volume, efficiency, and cost. Despite elevated OBC and APM power requirements, TPCs are concluded to not be a limitation in eMHDV applications. Finally, a topological based review of SOA TPCs is performed outlining key technological gaps, design requirements and recommendations, and future research required for expansion to eMHDVs.
- Open Access
- 16 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 5, 1209-1226
Optimal LLC Converter Design With Topology Morphing Control for Wide Voltage Range Battery Charging Applications
LLC converters benefit from soft switching and sinusoidal currents over dual active bridge (DAB) converters. The design process of an LLC converter involves the selection of resonant tank inductor, capacitor, magnetizing inductance, resonant frequency, and transformer turns ratio for proper operation within the desired range of voltages and power. However, the design and control of frequency-modulated LLC converters in wide voltage range applications is challenging due to the wide range of switching frequencies. Topology morphing control is an established technique utilized for countering the challenges of wide voltage range LLC operation. This work provides a design framework for an LLC converter with topology morphing for wide voltage range applications. The proposed design framework uses time domain analysis and a power loss model to evaluate the optimal converter parameters for efficiency maximization over the entire voltage range. Methodology of implementing online topology morphing with closed-loop control in a digital signal processor (DSP) considering an on-board battery charger (OBC) application is also provided. The design optimization process and control methodology are validated through a 300–700 V input, 250–450 V output, 3.3 kW hardware demonstrator. An experimental peak efficiency of 97.72% is achieved compared to a calculated 97.63% efficiency, proving the accuracy of the analytical model. Time weighted averaged efficiency above 96.7% is observed over the entire voltage range.
- 16 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 5, 1209-1226
Open AccessOptimal LLC Converter Design With Topology Morphing Control for Wide Voltage Range Battery Charging Applications
LLC converters benefit from soft switching and sinusoidal currents over dual active bridge (DAB) converters. The design process of an LLC converter involves the selection of resonant tank inductor, capacitor, magnetizing inductance, resonant frequency, and transformer turns ratio for proper operation within the desired range of voltages and power. However, the design and control of frequency-modulated LLC converters in wide voltage range applications is challenging due to the wide range of switching frequencies. Topology morphing control is an established technique utilized for countering the challenges of wide voltage range LLC operation. This work provides a design framework for an LLC converter with topology morphing for wide voltage range applications. The proposed design framework uses time domain analysis and a power loss model to evaluate the optimal converter parameters for efficiency maximization over the entire voltage range. Methodology of implementing online topology morphing with closed-loop control in a digital signal processor (DSP) considering an on-board battery charger (OBC) application is also provided. The design optimization process and control methodology are validated through a 300–700 V input, 250–450 V output, 3.3 kW hardware demonstrator. An experimental peak efficiency of 97.72% is achieved compared to a calculated 97.63% efficiency, proving the accuracy of the analytical model. Time weighted averaged efficiency above 96.7% is observed over the entire voltage range.
- 3 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (10) , 12774-12793
Phase-Shift and Duty-Ratio Control Optimization of a 6 kW Three-Port Resonant DC–DC Converter for Dual Auxiliary Voltage EV Applications
Isolated three-port dc–dc converters (TPCs) facilitate integration of three voltage sources/loads in electric vehicle applications. Three-port resonant converter (TPRC) is an attractive TPC topology as it inherits the advantages of resonant converters. Phase-shift (PS) control applied to TPRCs enables independent power flow control among all ports. Phase-shift and duty-ratio (PSDR) control introduces three additional degrees of freedom providing the potential for improving the converter efficiency compared to PS control. This article presents a generalized harmonic approximation-based steady-state mathematical model for a TPRC with five-variable PSDR control. Mathematical solutions to the steady-state converter bridge voltages and the ac currents under PSDR control are provided. The proposed mathematical model is integrated with a TPRC power loss model and together are used to formulate a control optimization problem for evaluating the optimal control variables at maximum converter efficiency. The optimized five-variable PSDR control is compared against PS control using a 6 kW/100 kHz rated hardware demonstrator, with efficiency improvements as high as 12.4%.
- 3 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (10) , 12774-12793
Phase-Shift and Duty-Ratio Control Optimization of a 6 kW Three-Port Resonant DC–DC Converter for Dual Auxiliary Voltage EV Applications
Isolated three-port dc–dc converters (TPCs) facilitate integration of three voltage sources/loads in electric vehicle applications. Three-port resonant converter (TPRC) is an attractive TPC topology as it inherits the advantages of resonant converters. Phase-shift (PS) control applied to TPRCs enables independent power flow control among all ports. Phase-shift and duty-ratio (PSDR) control introduces three additional degrees of freedom providing the potential for improving the converter efficiency compared to PS control. This article presents a generalized harmonic approximation-based steady-state mathematical model for a TPRC with five-variable PSDR control. Mathematical solutions to the steady-state converter bridge voltages and the ac currents under PSDR control are provided. The proposed mathematical model is integrated with a TPRC power loss model and together are used to formulate a control optimization problem for evaluating the optimal control variables at maximum converter efficiency. The optimized five-variable PSDR control is compared against PS control using a 6 kW/100 kHz rated hardware demonstrator, with efficiency improvements as high as 12.4%.
- Open Access
- 18 December 2023
- Published by Sri Lanka Journals Online in Engineer: Journal of the Institution of Engineers, Sri Lanka
- Vol. 56 (4) , 37-45
Voltage Impact on Oil Pipelines from High Voltage Underground Cables: Relocation of Overhead Lines at Kelanitissa
When a large-scale urban construction project requires the relocation of an electrical overhead transmission line, going underground becomes the only feasible solution. However, due consideration must be given to the interaction with underground steel pipelines already laid as the life of metallic pipelines is highly susceptible to corrosion when buried underground. Corrosion occurs because of an electrochemical reaction, with Impressed Current Cathodic protection, with an impressed negative dc voltage of the order of 850 mV, usually employed in many metal pipelines to mitigate the deterioration of the surface. This paper scrutinizes the impact of high voltage underground cables on the cathodic protection of buried metal pipelines. The induced voltage due to the addition of high voltage underground cables crossing the pipelines perpendicularly has been analysed using Ansys Maxwell’s electromagnetic software using actual dimensions and parameters. The introduction of two 220 kV underground cables from Biyagama - Kelanitissa line and two 132 kV underground cable circuits from Kelanitissa - Kolonnawa running perpendicular to six underground petroleum carrying steel pipelines has been investigated to study its influence on existing impressed current cathodic protection. The study has shown that the maximum induced voltage is less than 1.5 mV which has no adverse effect on any existing impressed current cathodic protection. The high voltage cables have been in fact installed and no adverse effects have been detected.
- 18 December 2023
- Published by Sri Lanka Journals Online in Engineer: Journal of the Institution of Engineers, Sri Lanka
- Vol. 56 (4) , 37-45
Open AccessVoltage Impact on Oil Pipelines from High Voltage Underground Cables: Relocation of Overhead Lines at Kelanitissa
When a large-scale urban construction project requires the relocation of an electrical overhead transmission line, going underground becomes the only feasible solution. However, due consideration must be given to the interaction with underground steel pipelines already laid as the life of metallic pipelines is highly susceptible to corrosion when buried underground. Corrosion occurs because of an electrochemical reaction, with Impressed Current Cathodic protection, with an impressed negative dc voltage of the order of 850 mV, usually employed in many metal pipelines to mitigate the deterioration of the surface. This paper scrutinizes the impact of high voltage underground cables on the cathodic protection of buried metal pipelines. The induced voltage due to the addition of high voltage underground cables crossing the pipelines perpendicularly has been analysed using Ansys Maxwell’s electromagnetic software using actual dimensions and parameters. The introduction of two 220 kV underground cables from Biyagama - Kelanitissa line and two 132 kV underground cable circuits from Kelanitissa - Kolonnawa running perpendicular to six underground petroleum carrying steel pipelines has been investigated to study its influence on existing impressed current cathodic protection. The study has shown that the maximum induced voltage is less than 1.5 mV which has no adverse effect on any existing impressed current cathodic protection. The high voltage cables have been in fact installed and no adverse effects have been detected.
- Top Cited PapersOpen Access
- 8 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 4, 945-964
A Review of DC-DC Resonant Converter Topologies and Control Techniques for Electric Vehicle Applications
Resonant converters are attractive for DC-DC converter applications of electric vehicles (EVs) due to their wide range of soft switching and less output filter requirements compared to dual active bridge (DAB) converters. However, the design and control implementation of resonant converters is comparatively challenging due to the nonlinearities introduced with the resonant tank. LLC and CLLC resonant converters are popular among the resonant converter topologies, while new topologies are being derived based on the basic resonant converter topologies. This paper conducts a review on the basic resonant converter topologies, modes of operation of the resonant converter, modeling and control techniques, and special design considerations for resonant converter design. Existing topologies and control techniques of resonant converters enabling the derivation of new converter topologies and control methodologies, are investigated.
- 8 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 4, 945-964
Top Cited PapersOpen AccessA Review of DC-DC Resonant Converter Topologies and Control Techniques for Electric Vehicle Applications
Resonant converters are attractive for DC-DC converter applications of electric vehicles (EVs) due to their wide range of soft switching and less output filter requirements compared to dual active bridge (DAB) converters. However, the design and control implementation of resonant converters is comparatively challenging due to the nonlinearities introduced with the resonant tank. LLC and CLLC resonant converters are popular among the resonant converter topologies, while new topologies are being derived based on the basic resonant converter topologies. This paper conducts a review on the basic resonant converter topologies, modes of operation of the resonant converter, modeling and control techniques, and special design considerations for resonant converter design. Existing topologies and control techniques of resonant converters enabling the derivation of new converter topologies and control methodologies, are investigated.
- Open Access
- 19 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Industrial Electronics Society
- Vol. 3, 650-662
Design and Control Methodology of a Three-Port Resonant Converter for Electric Vehicles
Three-port converters (TPCs) enable the design of more efficient, power dense,and high-power dc–dc converters. This article investigates the operation of a resonant TPC in electric vehicle applications. Operating conditions of the resonant TPC are presented. The steady-state analysis of the converter with zero-voltage switching consideration is discussed. A controller concept to regulate the resonant TPC is proposed. State-space equations of the resonant TPC are derived, and a nested closed-loop control strategy is implemented. The converter operation is validated in the PLECS simulation environment under step-load and input voltage variation conditions. The resonant TPC can regulate its output voltage under the proposed control strategy and maintain its operation at various operating conditions.
- 19 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Industrial Electronics Society
- Vol. 3, 650-662
Open AccessDesign and Control Methodology of a Three-Port Resonant Converter for Electric Vehicles
Three-port converters (TPCs) enable the design of more efficient, power dense,and high-power dc–dc converters. This article investigates the operation of a resonant TPC in electric vehicle applications. Operating conditions of the resonant TPC are presented. The steady-state analysis of the converter with zero-voltage switching consideration is discussed. A controller concept to regulate the resonant TPC is proposed. State-space equations of the resonant TPC are derived, and a nested closed-loop control strategy is implemented. The converter operation is validated in the PLECS simulation environment under step-load and input voltage variation conditions. The resonant TPC can regulate its output voltage under the proposed control strategy and maintain its operation at various operating conditions.