FVForrest Valdez

Forrest Valdez

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Forrest Valdez has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Integrated electro-optic control of biphoton generation using hybrid photonics

    by Xiaoxi Wang, Viphretuo Mere, Forrest Valdez, Shayan Mookherjea

    Parametric sources in quantum optics usually require some form of spectro-temporal control for conditional generation of high-purity single-photon states, but their properties have not yet been optimized using integrated microchips. Using external short-pulse lasers and separate devices for pump preparation and for photon generation, as is traditional, incurs many impediments such as reduced performance, increased loss, high cost, and limited scalability. To overcome these limitations, here we demonstrate a circuit including high-bandwidth, high-extinction ratio electro-optic modulators for pump-pulse preparation fully integrated with high-quality factor (Q) microresonators for efficient parametric nonlinearity, together with seamlessly interconnecting waveguides. The microchip uses different optical materials on a common platform and a multi-layer integrated photonic architecture. Using this, we control the joint spectrum of room-temperature biphoton generation for the first time on a single integrated microchip, and demonstrate that the theoretical purity bound can be achieved.


  • Open Access

    Publisher's Note: “Thin-film lithium niobate electro-optic modulators: To etch or not to etch” [Appl. Phys. Lett. 122, 120501 (2023)]

    by Shayan Mookherjea, Viphretuo Mere, Forrest Valdez

    This article was originally published online on 20 March 2023 with a spelling error in the title. The title is correct as is appears above.


  • Top Cited Papers

    100 GHz bandwidth, 1 volt integrated electro-optic Mach–Zehnder modulator at near-IR wavelengths

    by Forrest Valdez, Viphretuo Mere, Shayan Mookherjea

    Integrated photonics at near-IR (NIR) wavelengths currently lacks high bandwidth and low-voltage modulators, which add electro-optic functionality to passive circuits. Here, integrated hybrid thin-film lithium niobate (TFLN) electro-optic Mach–Zehnder modulators (MZM) are shown, using TFLN bonded to planarized silicon nitride waveguides. The design does not require TFLN etching or patterning. The push–pull MZM achieves a half-wave voltage length product (V π L) of 0.8 V.cm at 784 nm. MZM devices with 0.4 cm and 0.8 cm modulation length show a broadband electro-optic response with a 3 dB bandwidth beyond 100 GHz, with the latter showing a record bandwidth to half-wave voltage ratio of 100 GHz/V and a high extinction ratio exceeding 30 dB. Such fully integrated high-performance NIR electro-optic devices may benefit data communications, analog signal processing, test and measurement instrumentation, quantum information processing and other applications.


  • Buried-Electrode Hybrid Bonded Thin-Film Lithium Niobate Electro-Optic Mach-Zehnder Modulators

    by Forrest Valdez, Viphretuo Mere, Nicholas Boynton, Thomas A. Friedmann, Shawn Arterburn, Christina Dallo, Andrew T. Pomerene, Andrew L. Starbuck, Douglas C. Trotter, Anthony L. Lentine, et al.

    Hybrid bonded silicon nitride thin-film lithium niobate (TFLN) Mach-Zehnder modulators (MZMs) at 1310 nm were designed with metal coplanar waveguide electrodes buried in the silicon-on-insulator (SOI) chip. The MZM devices showed greatly improved performance compared to earlier devices of a similar design, and similar performance to comparable MZM devices with gold electrodes made on top of the TFLN layer. Both devices achieve a 3-dB electro-optic bandwidth greater than 110 GHz and voltage-driven optical extinction ratios greater than 28 dB. Half-wave voltage-length products ( $\text{V}\pi \text{L}$ ) of 2.8 and 2.5 $\text{V}\cdot $ cm were measured for the 0.5 and 0.4 cm long buried metal and top gold electrode MZMs, respectively.


  • Open Access

    Thin-film lithium niobate electro-optic modulators: To etch or not to etch

    by Shayan Mookherjea, Viphretuo Mere, Forrest Valdez

    This Perspective discusses and compares several different approaches to the design of high-bandwidth, low-voltage electro-optic devices, such as Mach–Zehnder modulators, made using thin-film lithium niobate (TFLN) and strategies for their incorporation as part of a larger photonic integrated circuit (PIC).


  • Improved fabrication of scalable hybrid silicon nitride–thin-film lithium niobate electro-optic modulators

    by Viphretuo Mere, Forrest Valdez, Shayan Mookherjea

    Strategies for improved fabrication of integrated thin-film lithium niobate electro-optic (EO) Mach–Zehnder modulators (MZMs) are reported using scalable processes and designs. The MZM devices utilize direct bonding of unetched and unpatterned thin-film lithium niobate to patterned and planarized silicon photonic microchips. The latter contains silicon nitride waveguide structures of various widths that are used to form hybrid modes that are suitable for high-bandwidth low-voltage EO modulators based on Pockels effect. We report that the incorporation of appropriately designed outgassing channels and certain modifications to key processing steps helped achieve a greater than 99% reduction in void density during bonding. Void reduction is critically important for these traveling-wave hybrid MZM devices in which the optical mode is controllably distributed between multiple thin layers and propagates over millimeter-scale lengths.


  • Integrated O- and C-band silicon-lithium niobate Mach-Zehnder modulators with 100 GHz bandwidth, low voltage, and low loss

    by Forrest Valdez, Viphretuo Mere, Xiaoxi Wang, Shayan Mookherjea

    Broadband integrated thin-film lithium niobate (TFLN) electro-optic modulators (EOM) are desirable for optical communications and signal processing in both the O-band (1310 nm) and C-band (1550 nm). To address these needs, we design and demonstrate Mach-Zehnder (MZ) EOM devices in a hybrid platform based on TFLN bonded to foundry-fabricated silicon photonic waveguides. Using a single silicon lithography step and a single bonding step, we realize MZ EOM devices which cover both wavelength ranges on the same chip. The EOM devices achieve 100 GHz EO bandwidth (referenced to 1 GHz) and about 2-3 V.cm figure-of-merit ( V π L ) with low on-chip optical loss in both the O-band and C-band.


  • Open Access

    Integrated O- and C-band Silicon-Lithium Niobate Mach-Zehnder Modulators with 100 GHz Bandwidth, Low Voltage, and Low Loss

    by Forrest Valdez, Viphretuo Mere, Xiaoxi Wang, Shayan Mookherjea

    Broadband integrated thin-film lithium niobate (TFLN) electro-optic modulators (EOM) are desirable for optical communications and signal processing in both the O-band (1310 nm) and C-band (1550 nm). To address these needs, we design and demonstrate Mach-Zehnder (MZ) EOM devices in a hybrid platform based on TFLN bonded to foundry-fabricated silicon photonic waveguides. Using a single silicon lithography step and a single bonding step, we realize MZ EOM devices which cover both wavelength ranges on the same chip. The EOM devices achieve 100 GHz EO bandwidth (referenced to 1 GHz) and about 2-3 V$.$cm figure-of-merit ($V_\pi L$) with low on-chip optical loss in both the O-band and C-band.

  • Open Access

    100 GHz Bandwidth, 1 Volt Near-infrared Electro-optic Mach-Zehnder Modulator

    by Forrest Valdez, Viphretuo Mere, Shayan Mookherjea

    An integrated hybrid thin-film lithium niobate (TFLN) electro-optic Mach-Zehnder modulator (MZM) is shown at near-infrared wavelengths. The design uses TFLN bonded to planarized silicon nitride waveguide circuits, and does not require etching or patterning of TFLN. The push-pull MZM achieves a half-wave voltage length product ($V_\pi L$) of 0.8 V$.$cm at 784 nm. MZM devices with 0.4 cm and 0.8 cm modulation length show a broadband electro-optic response with a 3 dB bandwidth beyond 100 GHz, with the latter showing a bandwidth to half-wave voltage ratio of 100 GHz/V.

  • Open Access

    110 GHz, 110 mW hybrid silicon-lithium niobate Mach-Zehnder modulator

    by Forrest Valdez, Viphretuo Mere, Xiaoxi Wang, Nicholas Boynton, Thomas A. Friedmann, Shawn Arterburn, Christina Dallo, Andrew T. Pomerene, Andrew L. Starbuck, Douglas C. Trotter, et al.

    High bandwidth, low voltage electro-optic modulators with high optical power handling capability are important for improving the performance of analog optical communications and RF photonic links. Here we designed and fabricated a thin-film lithium niobate (LN) Mach-Zehnder modulator (MZM) which can handle high optical power of 110 mW, while having 3-dB bandwidth greater than 110 GHz at 1550 nm. The design does not require etching of thin-film LN, and uses hybrid optical modes formed by bonding LN to planarized silicon photonic waveguide circuits. A high optical power handling capability in the MZM was achieved by carefully tapering the underlying Si waveguide to reduce the impact of optically-generated carriers, while retaining a high modulation efficiency. The MZM has a $$V_\pi L$$ V π L product of 3.1 V.cm and an on-chip optical insertion loss of 1.8 dB.