Zhao-Jun Yan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhao-Jun Yan has a total of 74 co-authors. Here are the top co-authors by number of shared publications:
Chao Liu
National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100101, China
4 shared publicationsChun Xu
Shanghai Astronomical Observatories, Chinese Academy of Sciences, Shanghai 200030, China
4 shared publicationsGuo-Liang Li
Purple Mountain Observatory, Chinese Academy of Sciences, Nanjing 210023, China
4 shared publications- Huizhen Yang
Jinling Institute of Technology
4 shared publications Jing Tang
National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100101, China
4 shared publicationsKe-Xin Li
Shanghai Astronomical Observatories, Chinese Academy of Sciences, Shanghai 200030, China
4 shared publications
Latest Publications
- Open Access
Wavefront Prediction for Adaptive Optics Without Wavefront Sensing Based on EfficientNetV2-S
Adaptive optics (AO) aims to counteract wavefront distortions caused by atmospheric turbulence and inherent system errors. Aberration recovery accuracy and computational speed play crucial roles in its correction capability. To address the issues of slow wavefront aberration detection speed and low measurement accuracy in current wavefront sensorless adaptive optics, this paper proposes a wavefront correction method based on the EfficientNetV2-S model. The method utilizes paired focal plane and defocused plane intensity images to directly extract intensity features and reconstruct phase information in a non-iterative manner. This approach enables the direct prediction of wavefront Zernike coefficients from the measured intensity images, specifically for orders 3 to 35, significantly enhancing the real-time correction capability of the AO system. Simulation results show that the root mean square error (RMSE) of the predicted Zernike coefficients for D/r0 values of 5, 10, and 15 are 0.038λ, 0.071λ, and 0.111λ, respectively, outperforming conventional convolutional neural network (CNN), ResNet50/101 and ConvNeXt-T models. The experimental results demonstrate that the EfficientNetV2-S model maintains good wavefront reconstruction and prediction capabilities at D/r0 = 5 and 10, highlighting its high precision and robust wavefront prediction ability. Compared to traditional iterative algorithms, the proposed method offers advantages such as high precision, fast computation, no need for iteration, and avoidance of local minima in processing wavefront aberrations.
Open AccessWavefront Prediction for Adaptive Optics Without Wavefront Sensing Based on EfficientNetV2-S
Adaptive optics (AO) aims to counteract wavefront distortions caused by atmospheric turbulence and inherent system errors. Aberration recovery accuracy and computational speed play crucial roles in its correction capability. To address the issues of slow wavefront aberration detection speed and low measurement accuracy in current wavefront sensorless adaptive optics, this paper proposes a wavefront correction method based on the EfficientNetV2-S model. The method utilizes paired focal plane and defocused plane intensity images to directly extract intensity features and reconstruct phase information in a non-iterative manner. This approach enables the direct prediction of wavefront Zernike coefficients from the measured intensity images, specifically for orders 3 to 35, significantly enhancing the real-time correction capability of the AO system. Simulation results show that the root mean square error (RMSE) of the predicted Zernike coefficients for D/r0 values of 5, 10, and 15 are 0.038λ, 0.071λ, and 0.111λ, respectively, outperforming conventional convolutional neural network (CNN), ResNet50/101 and ConvNeXt-T models. The experimental results demonstrate that the EfficientNetV2-S model maintains good wavefront reconstruction and prediction capabilities at D/r0 = 5 and 10, highlighting its high precision and robust wavefront prediction ability. Compared to traditional iterative algorithms, the proposed method offers advantages such as high precision, fast computation, no need for iteration, and avoidance of local minima in processing wavefront aberrations.
- 6 January 2026
- Published by IOP Publishing in Research in Astronomy and Astrophysics
- Vol. 26 (2) , 024006
Mock Observations for the CSST Mission: Multi-Channel Imager—Instrument Simulation
The Chinese Space Station Survey Telescope (CSST), a two-meter aperture astronomical space telescope under China’s manned space program, is equipped with multiple back-end scientific instruments. As an astronomical precision measurement module of the CSST, the Multi-Channel Imager (MCI) can cover a wide wavelength range from ultraviolet to near-infrared with three-color simultaneous high-precision photometry and imaging, which meets the scientific requirements for various fields. The diverse scientific objectives of MCI require not only a robust spaceborne platform, advanced optical systems, and observing facilities but also comprehensive software support for scientific operations and research. To this end, it is essential to develop realistic observational simulation software to thoroughly evaluate the MCI data stream and provide calibration tools for future scientific investigations. The MCI instrument simulation software will serve as a foundation for the development of the MCI data processing pipeline and will facilitate improvements in both hardware and software, as well as in the observational operation strategy, in alignment with the mission’s scientific goals. In conclusion, we present a comprehensive overview of the MCI instrument simulation and some corresponding performances of the MCI data processing pipeline.
- 6 January 2026
- Published by IOP Publishing in Research in Astronomy and Astrophysics
- Vol. 26 (2) , 024006
Mock Observations for the CSST Mission: Multi-Channel Imager—Instrument Simulation
The Chinese Space Station Survey Telescope (CSST), a two-meter aperture astronomical space telescope under China’s manned space program, is equipped with multiple back-end scientific instruments. As an astronomical precision measurement module of the CSST, the Multi-Channel Imager (MCI) can cover a wide wavelength range from ultraviolet to near-infrared with three-color simultaneous high-precision photometry and imaging, which meets the scientific requirements for various fields. The diverse scientific objectives of MCI require not only a robust spaceborne platform, advanced optical systems, and observing facilities but also comprehensive software support for scientific operations and research. To this end, it is essential to develop realistic observational simulation software to thoroughly evaluate the MCI data stream and provide calibration tools for future scientific investigations. The MCI instrument simulation software will serve as a foundation for the development of the MCI data processing pipeline and will facilitate improvements in both hardware and software, as well as in the observational operation strategy, in alignment with the mission’s scientific goals. In conclusion, we present a comprehensive overview of the MCI instrument simulation and some corresponding performances of the MCI data processing pipeline.
- 6 January 2026
- Published by IOP Publishing in Research in Astronomy and Astrophysics
- Vol. 26 (2) , 024008
Mock Observations for the CSST Mission: Integral Field Spectrograph-Instrument Simulation
The Chinese Space Station Survey Telescope (CSST) is a next-generation Stage-IV facility renowned for its wide field of view, high image quality, and multi-band observational capabilities. Among the five instruments onboard the CSST, the Integral Field Spectrograph (IFS) offers the unique ability to simultaneously capture spatial and spectral information across a field of view of no less than 6″ × 6″. Key advantages of the IFS include a high spatial resolution of 0 . ″ 2 and a broad spectral coverage from 350 to 1000 nm, making it an ideal instrument for studying physical processes in the vicinity of supermassive black holes within galaxies. To more accurately assess the technical and scientific performance of the CSST-IFS, it is essential to develop a simulation tool that incorporates realistic effects from all optical components. Such a simulation will form an integral part of the CSST-IFS data and pipeline system, enabling the development of the data reduction pipeline well ahead of actual observations. This paper presents an end-to-end simulation workflow for the CSST-IFS, incorporating a wide range of instrumental effects that may influence its spectral and imaging performance. The simulation accounts for optical diffraction effects introduced by all components, such as image slicers and slit array, as well as sub-pixel effects from gratings. It also includes various detector noises, frame-shifting effects, and charge-transfer inefficiency. Real observational conditions-such as target Doppler shift, cosmic rays, and other in-orbit operational effects-are also considered. We describe the technical implementation of the simulation and present results that quantitatively characterize key instrument parameters.
- 6 January 2026
- Published by IOP Publishing in Research in Astronomy and Astrophysics
- Vol. 26 (2) , 024008
Mock Observations for the CSST Mission: Integral Field Spectrograph-Instrument Simulation
The Chinese Space Station Survey Telescope (CSST) is a next-generation Stage-IV facility renowned for its wide field of view, high image quality, and multi-band observational capabilities. Among the five instruments onboard the CSST, the Integral Field Spectrograph (IFS) offers the unique ability to simultaneously capture spatial and spectral information across a field of view of no less than 6″ × 6″. Key advantages of the IFS include a high spatial resolution of 0 . ″ 2 and a broad spectral coverage from 350 to 1000 nm, making it an ideal instrument for studying physical processes in the vicinity of supermassive black holes within galaxies. To more accurately assess the technical and scientific performance of the CSST-IFS, it is essential to develop a simulation tool that incorporates realistic effects from all optical components. Such a simulation will form an integral part of the CSST-IFS data and pipeline system, enabling the development of the data reduction pipeline well ahead of actual observations. This paper presents an end-to-end simulation workflow for the CSST-IFS, incorporating a wide range of instrumental effects that may influence its spectral and imaging performance. The simulation accounts for optical diffraction effects introduced by all components, such as image slicers and slit array, as well as sub-pixel effects from gratings. It also includes various detector noises, frame-shifting effects, and charge-transfer inefficiency. Real observational conditions-such as target Doppler shift, cosmic rays, and other in-orbit operational effects-are also considered. We describe the technical implementation of the simulation and present results that quantitatively characterize key instrument parameters.
- Open Access
- 31 December 2025
- Published by MDPI AG in Micromachines
- Vol. 17 (1) , 58
Experimental Verification of Model-Based Wavefront Sensorless Adaptive Optics System for Large Aberrations
To address the limitations of conventional wavefront sensorless adaptive optics (AO) systems regarding iteration efficiency and convergence speed, this study conducts an experimental validation of a model-based wavefront sensorless AO approach. A physical experimental platform was established, which consisted of a light source, a Shack–Hartmann wavefront sensor, a deformable mirror (DM), and an imaging detector. Wavefront aberrations under different turbulence levels were employed as correction objects to evaluate the performance of the model-based wavefront sensorless AO system. For comparative analysis, experimental results obtained by using the classical stochastic parallel gradient descent (SPGD) control algorithm are also presented. Under identical software and hardware conditions, the experimental results show that as the turbulence level increases, the SPGD-based wavefront sensorless AO system requires a larger number of iterations and exhibits a slower convergence. In contrast, the model-based wavefront sensorless AO system demonstrates improved applicability and robustness in correcting large aberrations under strong turbulence levels, maintaining an almost constant convergence speed and achieving better correction performance. These findings offer theoretical insights and technical support for the real-time correction potential of large wavefront aberrations.
- 31 December 2025
- Published by MDPI AG in Micromachines
- Vol. 17 (1) , 58
Open AccessExperimental Verification of Model-Based Wavefront Sensorless Adaptive Optics System for Large Aberrations
To address the limitations of conventional wavefront sensorless adaptive optics (AO) systems regarding iteration efficiency and convergence speed, this study conducts an experimental validation of a model-based wavefront sensorless AO approach. A physical experimental platform was established, which consisted of a light source, a Shack–Hartmann wavefront sensor, a deformable mirror (DM), and an imaging detector. Wavefront aberrations under different turbulence levels were employed as correction objects to evaluate the performance of the model-based wavefront sensorless AO system. For comparative analysis, experimental results obtained by using the classical stochastic parallel gradient descent (SPGD) control algorithm are also presented. Under identical software and hardware conditions, the experimental results show that as the turbulence level increases, the SPGD-based wavefront sensorless AO system requires a larger number of iterations and exhibits a slower convergence. In contrast, the model-based wavefront sensorless AO system demonstrates improved applicability and robustness in correcting large aberrations under strong turbulence levels, maintaining an almost constant convergence speed and achieving better correction performance. These findings offer theoretical insights and technical support for the real-time correction potential of large wavefront aberrations.
- Open Access
Mock Observations for the CSST Mission: Multi-Channel Imager--Instrument Simulation
The Chinese Space Station Survey Telescope (CSST), a two-meter aperture astronomical space telescope under China's manned space program, is equipped with multiple back-end scientific instruments. As an astronomical precision measurement module of the CSST, the Multi-Channel Imager (MCI) can cover a wide wavelength range from ultraviolet to near-infrared with three-color simultaneous high-precision photometry and imaging, which meets the scientific requirements for various fields. The diverse scientific objectives of MCI require not only a robust airborne platform, advanced optical systems, and observing facilities but also comprehensive software support for scientific operations and research. To this end, it is essential to develop realistic observational simulation software to thoroughly evaluate the MCI data stream and provide calibration tools for future scientific investigations. The MCI instrument simulation software will serve as a foundation for the development of the MCI data processing pipeline and will facilitate improvements in both hardware and software, as well as in the observational operation strategy, in alignment with the mission's scientific goals. In conclusion, we present a comprehensive overview of the MCI instrument simulation and some corresponding performances of the MCI data processing pipeline.
Open AccessMock Observations for the CSST Mission: Multi-Channel Imager--Instrument Simulation
The Chinese Space Station Survey Telescope (CSST), a two-meter aperture astronomical space telescope under China's manned space program, is equipped with multiple back-end scientific instruments. As an astronomical precision measurement module of the CSST, the Multi-Channel Imager (MCI) can cover a wide wavelength range from ultraviolet to near-infrared with three-color simultaneous high-precision photometry and imaging, which meets the scientific requirements for various fields. The diverse scientific objectives of MCI require not only a robust airborne platform, advanced optical systems, and observing facilities but also comprehensive software support for scientific operations and research. To this end, it is essential to develop realistic observational simulation software to thoroughly evaluate the MCI data stream and provide calibration tools for future scientific investigations. The MCI instrument simulation software will serve as a foundation for the development of the MCI data processing pipeline and will facilitate improvements in both hardware and software, as well as in the observational operation strategy, in alignment with the mission's scientific goals. In conclusion, we present a comprehensive overview of the MCI instrument simulation and some corresponding performances of the MCI data processing pipeline.
- Open Access
Mock Observations for the CSST Mission: Integral Field Spectrograph--Instrument Simulation
The Chinese Space Station Survey Telescope (CSST) is a next-generation Stage-IV facility renowned for its wide field of view, high image quality, and multi-band observational capabilities. Among the five instruments onboard the CSST, the Integral Field Spectrograph (IFS) offers the unique ability to simultaneously capture spatial and spectral information across a field of view of no less than $6^{''}\times6^{''}$. Key advantages of the IFS include a high spatial resolution of $0.2^{''}$ and a broad spectral coverage from 350 to 1000 nm, making it an ideal instrument for studying physical processes in the vicinity of supermassive black holes within galaxies. To more accurately assess the technical and scientific performance of the CSST-IFS, it is essential to develop a simulation tool that incorporates realistic effects from all optical components. Such a simulation will form an integral part of the CSST-IFS data and pipeline system, enabling the development of the data reduction pipeline well ahead of actual observations. This paper presents an end-to-end simulation workflow for the CSST-IFS, incorporating a wide range of instrumental effects that may influence its spectral and imaging performance. The simulation accounts for optical diffraction effects introduced by all components, such as image slicers and slit array, as well as sub-pixel effects from gratings. It also includes various detector noises, frame-shifting effects, and charge-transfer inefficiency. Real observational conditions--such as target Doppler shift, cosmic rays, and other in-orbit operational effects--are also considered. We describe the technical implementation of the simulation and present results that quantitatively characterize key instrument parameters.Open AccessMock Observations for the CSST Mission: Integral Field Spectrograph--Instrument Simulation
The Chinese Space Station Survey Telescope (CSST) is a next-generation Stage-IV facility renowned for its wide field of view, high image quality, and multi-band observational capabilities. Among the five instruments onboard the CSST, the Integral Field Spectrograph (IFS) offers the unique ability to simultaneously capture spatial and spectral information across a field of view of no less than $6^{''}\times6^{''}$. Key advantages of the IFS include a high spatial resolution of $0.2^{''}$ and a broad spectral coverage from 350 to 1000 nm, making it an ideal instrument for studying physical processes in the vicinity of supermassive black holes within galaxies. To more accurately assess the technical and scientific performance of the CSST-IFS, it is essential to develop a simulation tool that incorporates realistic effects from all optical components. Such a simulation will form an integral part of the CSST-IFS data and pipeline system, enabling the development of the data reduction pipeline well ahead of actual observations. This paper presents an end-to-end simulation workflow for the CSST-IFS, incorporating a wide range of instrumental effects that may influence its spectral and imaging performance. The simulation accounts for optical diffraction effects introduced by all components, such as image slicers and slit array, as well as sub-pixel effects from gratings. It also includes various detector noises, frame-shifting effects, and charge-transfer inefficiency. Real observational conditions--such as target Doppler shift, cosmic rays, and other in-orbit operational effects--are also considered. We describe the technical implementation of the simulation and present results that quantitatively characterize key instrument parameters. - Open Access
- 31 December 2024
- Published by MDPI AG in Micromachines
- Vol. 16 (1) , 50
Wavefront Correction for Extended Sources Imaging Based on a 97-Element MEMS Deformable Mirror
Adaptive optics (AO) systems are capable of correcting wavefront aberrations caused by transmission media or defects in optical systems. The deformable mirror (DM) plays a crucial role as a component of the adaptive optics system. In this study, our focus is on analyzing the ability of a 97-element MEMS (Micro-Electro-Mechanical System) DM to correct blurred images of extended sources affected by atmospheric turbulence. The RUN optimizer is employed as the control method to evaluate the correction capability of the DM through simulations and physical experiments. Simulation results demonstrate that within 100 iterations, both the normalized gray variance and Strehl Ratio can converge, leading to an improvement in image quality by approximately 30%. In physics experiments, we observe an increase in normalized gray variance (NGV) from 0.53 to 0.97 and the natural image quality evaluation (NIQE) from 15.35 to 19.73, representing an overall improvement in image quality of about 28%. These findings can offer theoretical and technical support for applying MEMS DMs in correcting imaging issues related to extended sources degraded by wavefront aberrations.
- 31 December 2024
- Published by MDPI AG in Micromachines
- Vol. 16 (1) , 50
Open AccessWavefront Correction for Extended Sources Imaging Based on a 97-Element MEMS Deformable Mirror
Adaptive optics (AO) systems are capable of correcting wavefront aberrations caused by transmission media or defects in optical systems. The deformable mirror (DM) plays a crucial role as a component of the adaptive optics system. In this study, our focus is on analyzing the ability of a 97-element MEMS (Micro-Electro-Mechanical System) DM to correct blurred images of extended sources affected by atmospheric turbulence. The RUN optimizer is employed as the control method to evaluate the correction capability of the DM through simulations and physical experiments. Simulation results demonstrate that within 100 iterations, both the normalized gray variance and Strehl Ratio can converge, leading to an improvement in image quality by approximately 30%. In physics experiments, we observe an increase in normalized gray variance (NGV) from 0.53 to 0.97 and the natural image quality evaluation (NIQE) from 15.35 to 19.73, representing an overall improvement in image quality of about 28%. These findings can offer theoretical and technical support for applying MEMS DMs in correcting imaging issues related to extended sources degraded by wavefront aberrations.
- Open Access
An Efficient Method for Wavefront Aberration Correction Based on the RUN Optimizer
The correction of wavefront aberrations in wavefront sensorless (WFS-less) adaptive optical (AO) systems requires control algorithms that can ensure rapid convergence while maintaining effective correction capabilities. This paper proposes a novel control algorithm based on the RUNge Kutta optimizer (RUN) for WFS-less AO systems that enables the quick and efficient correction of small aberrations, as well as larger aberrations. To evaluate the convergence speed and correction capabilities of a WFS-less AO system based on the RUN control algorithm, we constructed a simulated AO system and an experimental setup with a 97-element deformable mirror (DM), respectively. Additionally, the results obtained with the Particle Swarm Optimization (PSO) algorithm, Differential Evolution Algorithm (DEA), and Genetic Algorithm (GA) are also provided for comparison and analysis. Both the simulated and experimental results consistently demonstrated that our proposed method outperformed several competing algorithms in terms of correction performance and convergence speed. Furthermore, the experimental results further validate the effectiveness of our control algorithm in scenarios involving significant aberrations.
Open AccessAn Efficient Method for Wavefront Aberration Correction Based on the RUN Optimizer
The correction of wavefront aberrations in wavefront sensorless (WFS-less) adaptive optical (AO) systems requires control algorithms that can ensure rapid convergence while maintaining effective correction capabilities. This paper proposes a novel control algorithm based on the RUNge Kutta optimizer (RUN) for WFS-less AO systems that enables the quick and efficient correction of small aberrations, as well as larger aberrations. To evaluate the convergence speed and correction capabilities of a WFS-less AO system based on the RUN control algorithm, we constructed a simulated AO system and an experimental setup with a 97-element deformable mirror (DM), respectively. Additionally, the results obtained with the Particle Swarm Optimization (PSO) algorithm, Differential Evolution Algorithm (DEA), and Genetic Algorithm (GA) are also provided for comparison and analysis. Both the simulated and experimental results consistently demonstrated that our proposed method outperformed several competing algorithms in terms of correction performance and convergence speed. Furthermore, the experimental results further validate the effectiveness of our control algorithm in scenarios involving significant aberrations.
- 1 January 2016
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 65 (19) , 199501
Zero co-phasing reference calibration method based on dispersed interferogram for segmented mirror telescope
Astronomical telescopes with increasingly large apertures are required to upgrade the limit of diffraction and collect the light efficiently for the purpose of observing fainter and more remote objects with higher angular resolution. However, it is universally believed that traditional techniques of manufacturing, polishing and measuring large glass mirrors will soon face some practical challenges. Therefore, 10-m class or larger ground-based telescopes will need to employ arrays of several smaller segments to assemble into a large primary mirror. For a telescope with segmented mirrors, the piston errors between segments must be adjusted to nearly zero according to the requirements in order to be integrated into a single optical surface, which is known as co-phasing. One of the current co-phasing techniques, which has been successfully applied to Keck telescopes, employs an integration of edge sensors to detect the mirror shapes in real time with an optical phasing sensor to offer zero references for these sensors regularly. Another technique is demonstrated by use of a pyramid wavefront sensor (PWFS) to align and co-phase segmented mirrors in an active control close-loop with a single measurement. The co-phased best flat positions of segments are used as the zero references in order to measure the interaction matrix between the PWFS and the segmented mirrors. So it must be addressed that how the zero co-phasing reference is calibrated with high precision in a large capture range on the issues of co-phasing segmented mirrors. The current methods either lack accuracies, or just measure piston errors correctly in a small range. In order to solve the problem, a zero co-phasing reference calibration method based on dispersed interferogram is proposed. Specifically, the idea of the method is to define an appropriate cost function which is used to evaluate the piston errors between segments. Then it will be easy to determine the zero co-phasing reference position while all the cost function values are calculated based on the dispersed interferogram data with different piston errors inside the capture range. The proposed cost function is defined as the sum of the ratios of the second peak to the third peak of each of the columns of the two-dimensional dispersed interferogram, whose intensity distribution is along the dispersion direction. The precision and dynamic range of the method are analyzed theoretically and studied by simulations. Furthermore, the optical experiment is set up to demonstrate the efficacy of the method. In the experiment a scanning procedure is applied to one mirror and the dispersed interferograms between two mirrors with different piston errors are obtained. And then, the cost functions of these dispersed interferograms are computed through which the zero co-phasing reference position is located. The experimental results prove that the zero co-phasing reference between two mirrors can be calibrated within an accuracy of about 10 nm by making use of the proposed method. In addition, the novel method solves the problem of 2 ambiguity. Besides its sub-millimeter level wide capture range, this new co-phasing detecting method provides a helpful reference for relevant studies.
- 1 January 2016
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 65 (19) , 199501
Zero co-phasing reference calibration method based on dispersed interferogram for segmented mirror telescope
Astronomical telescopes with increasingly large apertures are required to upgrade the limit of diffraction and collect the light efficiently for the purpose of observing fainter and more remote objects with higher angular resolution. However, it is universally believed that traditional techniques of manufacturing, polishing and measuring large glass mirrors will soon face some practical challenges. Therefore, 10-m class or larger ground-based telescopes will need to employ arrays of several smaller segments to assemble into a large primary mirror. For a telescope with segmented mirrors, the piston errors between segments must be adjusted to nearly zero according to the requirements in order to be integrated into a single optical surface, which is known as co-phasing. One of the current co-phasing techniques, which has been successfully applied to Keck telescopes, employs an integration of edge sensors to detect the mirror shapes in real time with an optical phasing sensor to offer zero references for these sensors regularly. Another technique is demonstrated by use of a pyramid wavefront sensor (PWFS) to align and co-phase segmented mirrors in an active control close-loop with a single measurement. The co-phased best flat positions of segments are used as the zero references in order to measure the interaction matrix between the PWFS and the segmented mirrors. So it must be addressed that how the zero co-phasing reference is calibrated with high precision in a large capture range on the issues of co-phasing segmented mirrors. The current methods either lack accuracies, or just measure piston errors correctly in a small range. In order to solve the problem, a zero co-phasing reference calibration method based on dispersed interferogram is proposed. Specifically, the idea of the method is to define an appropriate cost function which is used to evaluate the piston errors between segments. Then it will be easy to determine the zero co-phasing reference position while all the cost function values are calculated based on the dispersed interferogram data with different piston errors inside the capture range. The proposed cost function is defined as the sum of the ratios of the second peak to the third peak of each of the columns of the two-dimensional dispersed interferogram, whose intensity distribution is along the dispersion direction. The precision and dynamic range of the method are analyzed theoretically and studied by simulations. Furthermore, the optical experiment is set up to demonstrate the efficacy of the method. In the experiment a scanning procedure is applied to one mirror and the dispersed interferograms between two mirrors with different piston errors are obtained. And then, the cost functions of these dispersed interferograms are computed through which the zero co-phasing reference position is located. The experimental results prove that the zero co-phasing reference between two mirrors can be calibrated within an accuracy of about 10 nm by making use of the proposed method. In addition, the novel method solves the problem of 2 ambiguity. Besides its sub-millimeter level wide capture range, this new co-phasing detecting method provides a helpful reference for relevant studies.