Li Li Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Li Li Wang has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Jong Geun Kim
Graduate School of International Agricultural Technology, Seoul National University, Pyeongchang 25354, Korea
7 shared publications - Yan Fen Li
Graduate School of International Agricultural Technology, Seoul National University, Pyeongchang 25354, Korea
7 shared publications - Young Sang Yu
Graduate School of International Agricultural Technology, Seoul National University, Pyeongchang 25354, Korea
4 shared publications - Eun Chan Jeong
Graduate School of International Agricultural Technology, Seoul National University, Pyeongchang 25354, Korea
3 shared publications - Farhad Ahmadi
School of Agriculture, Food and Ecosystem Sciences, Faculty of Science, The University of Melbourne, Parkville, VIC 3010, Australia
3 shared publications - Hak Jin Kim
Research Institute of Eco-friendly Livestock Science, Institute of GreenBio Science Technology, Seoul National University, Pyeongchang 25354, Korea
2 shared publications
Latest Publications
- Open Access
- 1 December 2024
- Published by Asian Australasian Association of Animal Production Societies in Animal Bioscience
- Vol. 37 (12) , 2091-2100
Forage quality and fermentation dynamics of silages of Italian ryegrass (Lolium multiflorum Lam.) wilted for varying periods
Objective: This trial was conducted to explore the impact of different wilting time of Italian ryegrass (IRG) in the field on the nutritional quality and fermentation characteristics of its silage.Methods: The harvested IRG was directly wilted in the field for 0 day (W0), 1 day (W1), 2 days (W2), and 3 days (W3), respectively, and tedded every 6 hours. And the preserved IRG was sampled at 1, 2, 3, 5, 10, 20, 30, and 45 days after ensiling and three replicates per treatment.Results: With the extension of wilting, the dry matter (DM) content and pH value of wilted IRG gradually increased (p<0.05). There was a downward trend in; neutral detergent fiber (NDF), acid detergent fiber (ADF), and hemicellulose with the increase of wilting time, but only W2 and W3 were significantly different from W0 (p<0.05). Crude protein (CP), in vitro DM digestibility), total digestible nutrients (TDN), and relative feed value decreased significantly with the increase of wilting time (p<0.05), except for W1. After 45 days of ensiling, W1 had the highest CP, TDN, and the lowest ADF and NDF. During ensiling, the increase of acetic acid and the decrease of WSC in W0 and W1 were similar, but the accumulation rate of lactic acid in W0 was faster than that in W1, resulting in the lowest pH value in W0. After 5 days of ensiling, the ratio of lactic acid to acetic acid in W1 stabilized at around 3:1, while W0 kept changing.Conclusion: Italian ryegrass that wilted in the field for 1 day effectively improved the dynamic changes in CP, TDN, ADF, and NDF and fermentation quality of silage. Therefore, in practice, W1 was more recommended in production of IRG silage.
- 1 December 2024
- Published by Asian Australasian Association of Animal Production Societies in Animal Bioscience
- Vol. 37 (12) , 2091-2100
Open AccessForage quality and fermentation dynamics of silages of Italian ryegrass (Lolium multiflorum Lam.) wilted for varying periods
Objective: This trial was conducted to explore the impact of different wilting time of Italian ryegrass (IRG) in the field on the nutritional quality and fermentation characteristics of its silage.Methods: The harvested IRG was directly wilted in the field for 0 day (W0), 1 day (W1), 2 days (W2), and 3 days (W3), respectively, and tedded every 6 hours. And the preserved IRG was sampled at 1, 2, 3, 5, 10, 20, 30, and 45 days after ensiling and three replicates per treatment.Results: With the extension of wilting, the dry matter (DM) content and pH value of wilted IRG gradually increased (p<0.05). There was a downward trend in; neutral detergent fiber (NDF), acid detergent fiber (ADF), and hemicellulose with the increase of wilting time, but only W2 and W3 were significantly different from W0 (p<0.05). Crude protein (CP), in vitro DM digestibility), total digestible nutrients (TDN), and relative feed value decreased significantly with the increase of wilting time (p<0.05), except for W1. After 45 days of ensiling, W1 had the highest CP, TDN, and the lowest ADF and NDF. During ensiling, the increase of acetic acid and the decrease of WSC in W0 and W1 were similar, but the accumulation rate of lactic acid in W0 was faster than that in W1, resulting in the lowest pH value in W0. After 5 days of ensiling, the ratio of lactic acid to acetic acid in W1 stabilized at around 3:1, while W0 kept changing.Conclusion: Italian ryegrass that wilted in the field for 1 day effectively improved the dynamic changes in CP, TDN, ADF, and NDF and fermentation quality of silage. Therefore, in practice, W1 was more recommended in production of IRG silage.
- Open Access
- 1 September 2024
- Published by Asian Australasian Association of Animal Production Societies in Animal Bioscience
- Vol. 37 (9) , 1595-1602
Effects of fruit and vegetable waste addition on corn stalk silage quality
Objective: In this study, we explored the effect of fruit and vegetable waste addition on the quality of corn stalk silage.Methods: Corn stalks were ensiled 20 days after ear harvesting and mixed with fruit and vegetable waste (FVW) consisting of apple, orange, broccoli, and Chinese cabbage waste as 3% of fresh matter. Fruit waste consisted of solid residue obtained after juicing, and vegetable waste was collected from farms and cut into small pieces (2 to 3 cm). The materials were stored anaerobically in 20-L silo buckets and opened after 60 days of fermentation.Results: There were significant differences in dry matter (DM), acid detergent fiber (ADF), neutral detergent fiber (NDF), total digestible nutrient (TDN), and relative feed value (RFV) levels in FVW derived from all tested raw materials (p0.05) and significant decreases in yeast and mold counts (p<0.05) after ensiling.Conclusion: These findings confirmed that mixing various FVW materials, particularly orange waste, with corn stalks improved the nutritional value of silage. Adding broccoli waste resulted in better fermentation quality than the addition of other FVW materials.
- 1 September 2024
- Published by Asian Australasian Association of Animal Production Societies in Animal Bioscience
- Vol. 37 (9) , 1595-1602
Open AccessEffects of fruit and vegetable waste addition on corn stalk silage quality
Objective: In this study, we explored the effect of fruit and vegetable waste addition on the quality of corn stalk silage.Methods: Corn stalks were ensiled 20 days after ear harvesting and mixed with fruit and vegetable waste (FVW) consisting of apple, orange, broccoli, and Chinese cabbage waste as 3% of fresh matter. Fruit waste consisted of solid residue obtained after juicing, and vegetable waste was collected from farms and cut into small pieces (2 to 3 cm). The materials were stored anaerobically in 20-L silo buckets and opened after 60 days of fermentation.Results: There were significant differences in dry matter (DM), acid detergent fiber (ADF), neutral detergent fiber (NDF), total digestible nutrient (TDN), and relative feed value (RFV) levels in FVW derived from all tested raw materials (p0.05) and significant decreases in yeast and mold counts (p<0.05) after ensiling.Conclusion: These findings confirmed that mixing various FVW materials, particularly orange waste, with corn stalks improved the nutritional value of silage. Adding broccoli waste resulted in better fermentation quality than the addition of other FVW materials.
- Open Access
- 1 July 2024
- Published by Asian Australasian Association of Animal Production Societies in Animal Bioscience
- Vol. 37 (7) , 1196-1203
Application of near-infrared spectroscopy for hay evaluation at different degrees of sample preparation
Objective: A study was conducted to quantify the performance differences of the nearinfrared spectroscopy (NIRS) calibration models developed with different degrees of hay sample preparations.Methods: A total of 227 imported alfalfa (Medicago sativa L.) and another 360 imported timothy (Phleum pratense L.) hay samples were used to develop calibration models for nutrient value parameters such as moisture, neutral detergent fiber, acid detergent fiber, crude protein, and in vitro dry matter digestibility. Spectral data of hay samples prepared by milling into 1-mm particle size or unground were separately regressed against the wet chemistry results of the abovementioned parameters.Results: The performance of the developed NIRS calibration models was evaluated based on R2, standard error, and ratio percentage deviation (RPD). The models developed with ground hay were more robust and accurate than those with unground hay based on calibration model performance indexes such as R2 (coefficient of determination), standard error, and RPD. Although the R2 of calibration models was mainly greater than 0.90 across the feed value indexes, the R2 of cross-validations was much lower. The R2 of cross-validation varies depending on feed value indexes, which ranged from 0.61 to 0.81 in alfalfa, and from 0.62 to 0.95 in timothy. Estimation of feed values in imported hay can be achievable by the calibrated NIRS. However, the NIRS calibration models must be improved by including a broader range of imported hay samples in the modeling.Conclusion: Although the analysis accuracy of NIRS was substantially higher when calibration models were developed with ground samples, less sample preparation will be more advantageous for achieving rapid delivery of hay sample analysis results. Therefore, further research warrants investigating the level of sample preparations compromising analysis accuracy by NIRS.
- 1 July 2024
- Published by Asian Australasian Association of Animal Production Societies in Animal Bioscience
- Vol. 37 (7) , 1196-1203
Open AccessApplication of near-infrared spectroscopy for hay evaluation at different degrees of sample preparation
Objective: A study was conducted to quantify the performance differences of the nearinfrared spectroscopy (NIRS) calibration models developed with different degrees of hay sample preparations.Methods: A total of 227 imported alfalfa (Medicago sativa L.) and another 360 imported timothy (Phleum pratense L.) hay samples were used to develop calibration models for nutrient value parameters such as moisture, neutral detergent fiber, acid detergent fiber, crude protein, and in vitro dry matter digestibility. Spectral data of hay samples prepared by milling into 1-mm particle size or unground were separately regressed against the wet chemistry results of the abovementioned parameters.Results: The performance of the developed NIRS calibration models was evaluated based on R2, standard error, and ratio percentage deviation (RPD). The models developed with ground hay were more robust and accurate than those with unground hay based on calibration model performance indexes such as R2 (coefficient of determination), standard error, and RPD. Although the R2 of calibration models was mainly greater than 0.90 across the feed value indexes, the R2 of cross-validations was much lower. The R2 of cross-validation varies depending on feed value indexes, which ranged from 0.61 to 0.81 in alfalfa, and from 0.62 to 0.95 in timothy. Estimation of feed values in imported hay can be achievable by the calibrated NIRS. However, the NIRS calibration models must be improved by including a broader range of imported hay samples in the modeling.Conclusion: Although the analysis accuracy of NIRS was substantially higher when calibration models were developed with ground samples, less sample preparation will be more advantageous for achieving rapid delivery of hay sample analysis results. Therefore, further research warrants investigating the level of sample preparations compromising analysis accuracy by NIRS.
- Open Access
- 24 January 2024
- Published by MDPI AG in Agriculture
- Vol. 14 (2) , 174
Effects of a Delayed Harvest and Additives on the Fermentation Quality of Corn Stalk Silage
This study investigated the effects of harvest time, cellulase, lactic acid bacteria, and ensiling with alfalfa hay on the chemical parameters, bacterial community composition, and fermentation of corn stalk silage. Corn stalks were ensiled after the ear harvest at 0 days (D0) and 20 days (D20). Each harvest was treated with alfalfa hay [AL, 5% of fresh matter (FM)], Lactobacillus plantarum (Lp) (1 × 106 CFU/g of FM), Trichoderma cellulase (TC) (100 mg/kg of FM), or both Lp and TC (Lp+TC). The silos were opened after 60 days of fermentation. The dry matter (DM) content of raw materials increased from 18.79% to 28.32% with the harvest time. The acid detergent fiber (ADF) content also significantly increased (p < 0.05), while water-soluble carbohydrates (WSCs) and in vitro dry matter digestibility (IVDMD) significantly decreased (p < 0.05). After 60 days, the neutral detergent fiber (NDF) and ADF contents increased, and all chemical composition and fermentation state parameters of silages had significant differences (p < 0.05) with the harvest time. Compared with the control group, the AL treatment resulted in higher (p < 0.05) DM and crude protein (CP) contents, and the Lp+TC treatment resulted in a lower NDF (p < 0.05) content. For D0, the TC and Lp+TC treatments resulted in a higher WSC content and lower NDF and ADF contents than in D20. Meanwhile, the ammonia-nitrogen (NH3-N) content in each treatment was less than 10% of the DM. The pH values were all approximately 3.70. The AL treatment significantly increased the lactic acid (LA) content and lactic/acetic acid ratio (LA/AA). Additionally, the silages had a similar microbial environment before and after fermentation. We recommend harvesting corn stalks for silage immediately after the corn ear harvest. Adding cellulase improved the corn stalk feed value, and ensiling with alfalfa hay improved its fermentation quality.
- 24 January 2024
- Published by MDPI AG in Agriculture
- Vol. 14 (2) , 174
Open AccessEffects of a Delayed Harvest and Additives on the Fermentation Quality of Corn Stalk Silage
This study investigated the effects of harvest time, cellulase, lactic acid bacteria, and ensiling with alfalfa hay on the chemical parameters, bacterial community composition, and fermentation of corn stalk silage. Corn stalks were ensiled after the ear harvest at 0 days (D0) and 20 days (D20). Each harvest was treated with alfalfa hay [AL, 5% of fresh matter (FM)], Lactobacillus plantarum (Lp) (1 × 106 CFU/g of FM), Trichoderma cellulase (TC) (100 mg/kg of FM), or both Lp and TC (Lp+TC). The silos were opened after 60 days of fermentation. The dry matter (DM) content of raw materials increased from 18.79% to 28.32% with the harvest time. The acid detergent fiber (ADF) content also significantly increased (p < 0.05), while water-soluble carbohydrates (WSCs) and in vitro dry matter digestibility (IVDMD) significantly decreased (p < 0.05). After 60 days, the neutral detergent fiber (NDF) and ADF contents increased, and all chemical composition and fermentation state parameters of silages had significant differences (p < 0.05) with the harvest time. Compared with the control group, the AL treatment resulted in higher (p < 0.05) DM and crude protein (CP) contents, and the Lp+TC treatment resulted in a lower NDF (p < 0.05) content. For D0, the TC and Lp+TC treatments resulted in a higher WSC content and lower NDF and ADF contents than in D20. Meanwhile, the ammonia-nitrogen (NH3-N) content in each treatment was less than 10% of the DM. The pH values were all approximately 3.70. The AL treatment significantly increased the lactic acid (LA) content and lactic/acetic acid ratio (LA/AA). Additionally, the silages had a similar microbial environment before and after fermentation. We recommend harvesting corn stalks for silage immediately after the corn ear harvest. Adding cellulase improved the corn stalk feed value, and ensiling with alfalfa hay improved its fermentation quality.
- Open Access
- 31 January 2023
- Published by Korean Society of Animal Science and Technology in Journal of Animal Science and Technology
- Vol. 65 (1) , 96-112
Effects of sodium diacetate and microbial inoculants on fermentation of forage rye
Journal of Animal Science and Technology (JAST) is a peer-reviewed, open access journal publishing original research, review articles and notes in all fields of animal science. Topics covered by the journal include: genetics and breeding, physiology, nutrition of monogastric animals, nutrition of ruminants, animal products (milk, meat, eggs and their by-products) and their processing, grasslands and roughages, livestock environment, animal biotechnology, animal behavior and welfare.
- 31 January 2023
- Published by Korean Society of Animal Science and Technology in Journal of Animal Science and Technology
- Vol. 65 (1) , 96-112
Open AccessEffects of sodium diacetate and microbial inoculants on fermentation of forage rye
Journal of Animal Science and Technology (JAST) is a peer-reviewed, open access journal publishing original research, review articles and notes in all fields of animal science. Topics covered by the journal include: genetics and breeding, physiology, nutrition of monogastric animals, nutrition of ruminants, animal products (milk, meat, eggs and their by-products) and their processing, grasslands and roughages, livestock environment, animal biotechnology, animal behavior and welfare.
- Open Access
- 14 November 2022
- Published by MDPI AG in Agriculture
- Vol. 12 (11) , 1914
Comparative Accuracy of In Vitro Rumen Fermentation and Enzymatic Methodologies for Determination of Undigested Neutral Detergent Fiber in Forages and Development of Predictive Equations Using NIRS
Undigested neutral detergent fiber (uNDF) is becoming more widely recognized as an important fiber fraction in forage quality assessment because it explains a portion of NDF that is inaccessible to digestion in the ruminant digestive system and is, thus, important in modeling the digestion kinetics of the potentially degradable component of NDF. In experiment 1, uNDF was determined in several forage species in order to compare the accuracy of two reference methods: (1) a long-term in vitro ruminal fermentation (240 h) using an Ankom DaisyII incubator and (2) a multi-step enzymatic method without ruminal fluid. The objective of experiment 2 was to construct predictive equations for uNDF estimation using acid detergent lignin (ADL) and near-infrared reflectance spectroscopy (NIRS) in a pool (n = 264) of alfalfa hay, timothy hay, and tall fescue straw, using the most accurate reference method selected in experiment 1. Partial least squares regression analysis was used to calibrate the reference values against NIRS spectra. Several indicators were used to assess the performance of validation results, including standard error of cross-validation (SECrV), coefficient of determination of cross-validation (R2CrV), and ratio percentage deviation (RPD). The findings of experiment 1 suggested that, relative to the in vitro ruminal methodology, the enzymatic approach overestimated uNDF concentration of forages. Repeatability coefficient was also greater when uNDF was determined using the in vitro versus enzymatic procedure, potentially disqualifying the enzymatic method for the uNDF analysis in forages. In experiment 2, a poor relationship was established between ADL and uNDF (R2 < 0.60), suggesting the inadequacy of ADL parameter to represent the uNDF pool size in these forages. The best predictive equation using NIRS was obtained for alfalfa hay (R2CrV = 0.92; SECrV = 1.16; RPD = 3.57), using the in vitro fermentation as a reference method. The predictive equations were moderately accurate for timothy hay (R2CrV = 0.80; SECrV = 1.31; RPD = 2.08) and tall fescue straw (R2CrV = 0.79; SECrV = 1.38; RPD = 2.18). Our findings suggested the inadequacy of the enzymatic procedure in accurately determining uNDF concentration of forages as compared with the in vitro rumen fermentation protocol. Although the NIRS equations developed using the alfalfa hay dataset were more accurate than that of timothy hay and tall fescue straw, the validation results verified applicability of the equations as a fast screening tool for qualitative prediction of uNDF in these forages, which is important in commercial settings.
- 14 November 2022
- Published by MDPI AG in Agriculture
- Vol. 12 (11) , 1914
Open AccessComparative Accuracy of In Vitro Rumen Fermentation and Enzymatic Methodologies for Determination of Undigested Neutral Detergent Fiber in Forages and Development of Predictive Equations Using NIRS
Undigested neutral detergent fiber (uNDF) is becoming more widely recognized as an important fiber fraction in forage quality assessment because it explains a portion of NDF that is inaccessible to digestion in the ruminant digestive system and is, thus, important in modeling the digestion kinetics of the potentially degradable component of NDF. In experiment 1, uNDF was determined in several forage species in order to compare the accuracy of two reference methods: (1) a long-term in vitro ruminal fermentation (240 h) using an Ankom DaisyII incubator and (2) a multi-step enzymatic method without ruminal fluid. The objective of experiment 2 was to construct predictive equations for uNDF estimation using acid detergent lignin (ADL) and near-infrared reflectance spectroscopy (NIRS) in a pool (n = 264) of alfalfa hay, timothy hay, and tall fescue straw, using the most accurate reference method selected in experiment 1. Partial least squares regression analysis was used to calibrate the reference values against NIRS spectra. Several indicators were used to assess the performance of validation results, including standard error of cross-validation (SECrV), coefficient of determination of cross-validation (R2CrV), and ratio percentage deviation (RPD). The findings of experiment 1 suggested that, relative to the in vitro ruminal methodology, the enzymatic approach overestimated uNDF concentration of forages. Repeatability coefficient was also greater when uNDF was determined using the in vitro versus enzymatic procedure, potentially disqualifying the enzymatic method for the uNDF analysis in forages. In experiment 2, a poor relationship was established between ADL and uNDF (R2 < 0.60), suggesting the inadequacy of ADL parameter to represent the uNDF pool size in these forages. The best predictive equation using NIRS was obtained for alfalfa hay (R2CrV = 0.92; SECrV = 1.16; RPD = 3.57), using the in vitro fermentation as a reference method. The predictive equations were moderately accurate for timothy hay (R2CrV = 0.80; SECrV = 1.31; RPD = 2.08) and tall fescue straw (R2CrV = 0.79; SECrV = 1.38; RPD = 2.18). Our findings suggested the inadequacy of the enzymatic procedure in accurately determining uNDF concentration of forages as compared with the in vitro rumen fermentation protocol. Although the NIRS equations developed using the alfalfa hay dataset were more accurate than that of timothy hay and tall fescue straw, the validation results verified applicability of the equations as a fast screening tool for qualitative prediction of uNDF in these forages, which is important in commercial settings.
- Open Access
- 28 June 2022
- Published by Asian Australasian Association of Animal Production Societies in Animal Bioscience
- Vol. 35 (12) , 1871-1880
Effects of sodium diacetate or microbial inoculants on aerobic stability of wilted rye silage
Objective: The primary goal was to identify the effectiveness of chemical or biological additives in delaying the deterioration of early-harvested wilted rye silage after exposure to air.Methods: Rye harvested as a whole plant at the early heading stage was wilted for 24 h. The wilted forage was divided into treatments including sodium diacetate (SDA) at 3 (SDA3) and 6 g/kg (SDA6), Lactobacillus plantarum (LP), L. buchneri (LB), or their equal mixture (LP+LB) at 1×106 colony-forming unit/g fresh matter.Results: After 60 d of conservation in 20-L silos, lactic acid was greater in LP and LP+LB silages than other treatments (102 vs 90.2 g/kg dry matter [DM]). Acetic acid was greatest in SDA6 (32.0 g/kg DM) followed by LB (26.1 g/kg DM) and was lowest in LP treatment (4.73 g/kg DM). Silage pH was lower with microbial inoculation and the lowest and highest values were observed in LP and untreated silages, respectively. After 60 d, neutral detergent fiber concentration was lowest in SDA6 silages, resulting in the greatest in vitro DM digestibility (846 g/kg DM). Aerobic stability was longest in SDA6 (176 h) followed by LB treatment (134 h). Instability after aerobiosis was greatest in LP silages (68 h), about 8 h less than untreated silages. After aerobic exposure, yeast and mold numbers were lowest in SDA6 silages, resulting in DM loss minimization. Exhaustion of acetic acid and lactic acid after aerobic exposure was lowest with SDA6 but greatest with untreated and LP silages.Conclusion: Treatment of early-cut wilted rye forage with SDA at 6 g/kg resulted in silages with higher feeding value and fermentation quality, and substantially delayed deterioration after aerobic exposure, potentially qualifying SDA at this load for promotion of silage quality and delaying aerobic spoilage of early-harvested (low DM) rye forage.
- 28 June 2022
- Published by Asian Australasian Association of Animal Production Societies in Animal Bioscience
- Vol. 35 (12) , 1871-1880
Open AccessEffects of sodium diacetate or microbial inoculants on aerobic stability of wilted rye silage
Objective: The primary goal was to identify the effectiveness of chemical or biological additives in delaying the deterioration of early-harvested wilted rye silage after exposure to air.Methods: Rye harvested as a whole plant at the early heading stage was wilted for 24 h. The wilted forage was divided into treatments including sodium diacetate (SDA) at 3 (SDA3) and 6 g/kg (SDA6), Lactobacillus plantarum (LP), L. buchneri (LB), or their equal mixture (LP+LB) at 1×106 colony-forming unit/g fresh matter.Results: After 60 d of conservation in 20-L silos, lactic acid was greater in LP and LP+LB silages than other treatments (102 vs 90.2 g/kg dry matter [DM]). Acetic acid was greatest in SDA6 (32.0 g/kg DM) followed by LB (26.1 g/kg DM) and was lowest in LP treatment (4.73 g/kg DM). Silage pH was lower with microbial inoculation and the lowest and highest values were observed in LP and untreated silages, respectively. After 60 d, neutral detergent fiber concentration was lowest in SDA6 silages, resulting in the greatest in vitro DM digestibility (846 g/kg DM). Aerobic stability was longest in SDA6 (176 h) followed by LB treatment (134 h). Instability after aerobiosis was greatest in LP silages (68 h), about 8 h less than untreated silages. After aerobic exposure, yeast and mold numbers were lowest in SDA6 silages, resulting in DM loss minimization. Exhaustion of acetic acid and lactic acid after aerobic exposure was lowest with SDA6 but greatest with untreated and LP silages.Conclusion: Treatment of early-cut wilted rye forage with SDA at 6 g/kg resulted in silages with higher feeding value and fermentation quality, and substantially delayed deterioration after aerobic exposure, potentially qualifying SDA at this load for promotion of silage quality and delaying aerobic spoilage of early-harvested (low DM) rye forage.