Khawaja Hasnain Iltaf
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Khawaja Hasnain Iltaf has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
- Rizwan Sarwar Awan
School of Resources and Environmental Engineering, Hefei University of Technology, Hefei, China
6 shared publications Ashar Khan
Water and Power Development Authority, Lahore, Pakistan
4 shared publicationsMuhammad Tahir
Research Institute of Unconventional Petroleum China University of Petroleum (Beijing) Beijing 102249 China cup.edu.cn
2 shared publicationsSahib Khan
Oil and Gas Development Company Limited, Islamabad, Pakistan
2 shared publicationsSiraj Mehboob
Department of Earth and Environmental Sciences University of Milano—Bicocca Milan Italy
2 shared publicationsA. Khan
1 shared publication
Latest Publications
- Open Access
- 1 September 2026
- Published by KEAI Publishing in Petroleum Science
- Vol. 23 (9) , 5292-5318
Micron- to meter-scale shale oil migration differentiation and mobility effects: New insights into high-mobility migration sweet spot and sustainable shale oil recovery
- 1 September 2026
- Published by KEAI Publishing in Petroleum Science
- Vol. 23 (9) , 5292-5318
Open AccessMicron- to meter-scale shale oil migration differentiation and mobility effects: New insights into high-mobility migration sweet spot and sustainable shale oil recovery
- 29 June 2026
- Published by Wiley in Journal of Petroleum Geology
Diagenesis and Reservoir Characteristics of Upper Triassic Chang 6 Sandstone in Panlong Area, Ordos Basin: Implications for Hydrocarbon Exploration
The extreme microstructural heterogeneity of tight sandstone reservoirs poses a significant challenge for accurately predicting fluid flow and optimizing hydrocarbon recovery, as conventional petrophysical models often fail to capture complex, multi‐scale pore architectures. To address this, this study investigates the diagenetic evolution and reservoir characteristics of the Upper Triassic Chang 6 tight sandstone in the Panlong area, Ordos Basin. By integrating fluid inclusion micro‐thermometry, scanning electron microscopy (SEM), and multi‐scale fractal geometry (utilizing the Frenkel–Halsey–Hill [FHH] model and high‐pressure mercury injection), we systematically quantify how specific diagenetic processes dictate pore geometry. Petrographic analysis reveals the reservoir is predominantly composed of mature arkosic sandstone, where primary porosity (ranging from 0.4% to 17.8%) has been severely diminished by intense mechanical compaction and pervasive authigenic cementation, including calcite, chlorite, and illite. The reservoir pore system exhibits highly heterogeneous, bimodal fractal behavior. Although nanoscale pores (<30 nm) maintain relative structural uniformity, fluid‐governing meso‐ and macropores demonstrate extreme tortuosity strictly driven by diagenetic facies. Specifically, compaction and carbonate cementation exponentially increase fractal complexity and capillary resistance, whereas feldspar dissolution zones yield secondary porosity networks with reduced structural tortuosity. Fluid inclusion data indicate that primary liquid hydrocarbon charging occurred between 100°C and 170°C, coinciding with early‐to‐middle diagenetic cementation. Ultimately, these findings demonstrate that quantitative multi‐scale fractal evaluation is essential for targeting secondary dissolution sweet spots, providing a robust theoretical framework for enhanced exploration strategies in tight continental basins.
- 29 June 2026
- Published by Wiley in Journal of Petroleum Geology
Diagenesis and Reservoir Characteristics of Upper Triassic Chang 6 Sandstone in Panlong Area, Ordos Basin: Implications for Hydrocarbon Exploration
The extreme microstructural heterogeneity of tight sandstone reservoirs poses a significant challenge for accurately predicting fluid flow and optimizing hydrocarbon recovery, as conventional petrophysical models often fail to capture complex, multi‐scale pore architectures. To address this, this study investigates the diagenetic evolution and reservoir characteristics of the Upper Triassic Chang 6 tight sandstone in the Panlong area, Ordos Basin. By integrating fluid inclusion micro‐thermometry, scanning electron microscopy (SEM), and multi‐scale fractal geometry (utilizing the Frenkel–Halsey–Hill [FHH] model and high‐pressure mercury injection), we systematically quantify how specific diagenetic processes dictate pore geometry. Petrographic analysis reveals the reservoir is predominantly composed of mature arkosic sandstone, where primary porosity (ranging from 0.4% to 17.8%) has been severely diminished by intense mechanical compaction and pervasive authigenic cementation, including calcite, chlorite, and illite. The reservoir pore system exhibits highly heterogeneous, bimodal fractal behavior. Although nanoscale pores (<30 nm) maintain relative structural uniformity, fluid‐governing meso‐ and macropores demonstrate extreme tortuosity strictly driven by diagenetic facies. Specifically, compaction and carbonate cementation exponentially increase fractal complexity and capillary resistance, whereas feldspar dissolution zones yield secondary porosity networks with reduced structural tortuosity. Fluid inclusion data indicate that primary liquid hydrocarbon charging occurred between 100°C and 170°C, coinciding with early‐to‐middle diagenetic cementation. Ultimately, these findings demonstrate that quantitative multi‐scale fractal evaluation is essential for targeting secondary dissolution sweet spots, providing a robust theoretical framework for enhanced exploration strategies in tight continental basins.
- 22 May 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (22) , 10356-10373
Multiscale Pore Characterization of the New Albany Shale: Insights from Complementary Analytical Techniques
- 22 May 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 39 (22) , 10356-10373
Multiscale Pore Characterization of the New Albany Shale: Insights from Complementary Analytical Techniques
- 11 October 2024
- Published by Pleiades Publishing Ltd in Doklady Earth Sciences
- Vol. 519 (2) , 2271-2284
Seismic Imaging of Strata Truncating to Base Miocene Unconformity Integrated with Petrophysical Analysis of Mianwali Re-entrant, Pakistan: a Case Study from the Upper Indus Basin of Pakistan
This study aims to delineate the truncating subsurface horizons of the northwestern Indus foreland basin by using seismic imaging. 2D seismic data interpretation identifies the deepening of the basement in the north and west directions. Moreover, the seismic sections extended to the southeast, reveal the Cretaceous-Oligocene successions are missing in the eastern part of the Mianwali Re-entrant area. Flexural subsidence in the northwestern collisional regime has caused the thickening of the sedimentary layers in western regimes as compared to the eastern part. Seismic data revealed that the Precambrian basement rocks are exposed towards the S–E direction in the uplifted Sargodha High. Re-entrant’s boundary faults, i.e., Jehlum, Kalabagh, and Kundal, have the strike-slip movement and are believed to control the arcuate settings of Salt and Trans-Indus Ranges. Cambrian and younger rocks show low reflection time and depth values in the southeast. However, the Triassic, Jurassic, and Paleogene formations truncate to base Miocene unconformity at different shot points of the available seismic sections. Reservoir parameters at different reservoirs are evaluated using well-log data. Petrophysical analysis of the Cambrian and Jurassic formations shows fair to very good effective porosities. Hydrocarbon saturation for Khewra Sandstone is about 54%, while that of Shinawri Formation is 72% from the respective pay zones.
- 11 October 2024
- Published by Pleiades Publishing Ltd in Doklady Earth Sciences
- Vol. 519 (2) , 2271-2284
Seismic Imaging of Strata Truncating to Base Miocene Unconformity Integrated with Petrophysical Analysis of Mianwali Re-entrant, Pakistan: a Case Study from the Upper Indus Basin of Pakistan
This study aims to delineate the truncating subsurface horizons of the northwestern Indus foreland basin by using seismic imaging. 2D seismic data interpretation identifies the deepening of the basement in the north and west directions. Moreover, the seismic sections extended to the southeast, reveal the Cretaceous-Oligocene successions are missing in the eastern part of the Mianwali Re-entrant area. Flexural subsidence in the northwestern collisional regime has caused the thickening of the sedimentary layers in western regimes as compared to the eastern part. Seismic data revealed that the Precambrian basement rocks are exposed towards the S–E direction in the uplifted Sargodha High. Re-entrant’s boundary faults, i.e., Jehlum, Kalabagh, and Kundal, have the strike-slip movement and are believed to control the arcuate settings of Salt and Trans-Indus Ranges. Cambrian and younger rocks show low reflection time and depth values in the southeast. However, the Triassic, Jurassic, and Paleogene formations truncate to base Miocene unconformity at different shot points of the available seismic sections. Reservoir parameters at different reservoirs are evaluated using well-log data. Petrophysical analysis of the Cambrian and Jurassic formations shows fair to very good effective porosities. Hydrocarbon saturation for Khewra Sandstone is about 54%, while that of Shinawri Formation is 72% from the respective pay zones.
- 2 April 2024
- Published by Pleiades Publishing Ltd in Lithology and Mineral Resources
- Vol. 59 (2) , 234-246
2D Seismic Interpretation of Compressional Regime of the Dohdak Concession and Source Rock Assessment of the Early Cretaceous Sembar Formation; a Case Study from Central Indus Basin, Pakistan
Dhodak concession is a part of eastern margin of Sulaiman Fold and Thrust Belt formed as a result of complex transpressional interactions during the Indian-Eurasian collision. Study area reveals the compressional structures that provide suitable hydrocarbon traps of Cretaceous age. Different lithological boundaries and structural properties are identified from 2D seismic, amplitude, and frequency derived seismic attributes. Time and depth structural mapping of the Pab Sandstone (Late Cretaceous) demonstrated an ideal doubly plunging anticlinal structure that represents four way closure for hydrocarbons accumulation in the study area. Observed relatively low-frequency anomaly confirms the hydrocarbon-bearing reservoirs. Since hydrocarbon quantity in a reservoir also depends on the generation potential of source rock, so an attempt has been made to estimate the Total Organic Carbon (TOC) of the source i.e. Sembar Formation. The latter was divided divided into three parts based on the calculated TOC using the Δ log R technique. Upper and lower parts of the Sembar Formation chiefly comprise the lower TOC values (1.90 and 2.1 wt %), whereas the middle part comprises the higher TOC values averaging 3.01 wt %.
- 2 April 2024
- Published by Pleiades Publishing Ltd in Lithology and Mineral Resources
- Vol. 59 (2) , 234-246
2D Seismic Interpretation of Compressional Regime of the Dohdak Concession and Source Rock Assessment of the Early Cretaceous Sembar Formation; a Case Study from Central Indus Basin, Pakistan
Dhodak concession is a part of eastern margin of Sulaiman Fold and Thrust Belt formed as a result of complex transpressional interactions during the Indian-Eurasian collision. Study area reveals the compressional structures that provide suitable hydrocarbon traps of Cretaceous age. Different lithological boundaries and structural properties are identified from 2D seismic, amplitude, and frequency derived seismic attributes. Time and depth structural mapping of the Pab Sandstone (Late Cretaceous) demonstrated an ideal doubly plunging anticlinal structure that represents four way closure for hydrocarbons accumulation in the study area. Observed relatively low-frequency anomaly confirms the hydrocarbon-bearing reservoirs. Since hydrocarbon quantity in a reservoir also depends on the generation potential of source rock, so an attempt has been made to estimate the Total Organic Carbon (TOC) of the source i.e. Sembar Formation. The latter was divided divided into three parts based on the calculated TOC using the Δ log R technique. Upper and lower parts of the Sembar Formation chiefly comprise the lower TOC values (1.90 and 2.1 wt %), whereas the middle part comprises the higher TOC values averaging 3.01 wt %.
- Open Access
- 25 January 2024
- Published by Elsevier in Journal of Natural Gas Geoscience
- Vol. 9 (2) , 123-137
Structural inheritance through 3D reservoir modeling and ant-tracking attribute implications for structural configuration of Upper Cretaceous Pab Sandstone, Kirthar Fold Belt, Pakistan
- 25 January 2024
- Published by Elsevier in Journal of Natural Gas Geoscience
- Vol. 9 (2) , 123-137
Open AccessStructural inheritance through 3D reservoir modeling and ant-tracking attribute implications for structural configuration of Upper Cretaceous Pab Sandstone, Kirthar Fold Belt, Pakistan
- Open Access
- 1 April 2023
- Published by KEAI Publishing in Energy Geoscience
- Vol. 4 (2)
2D seismic interpretation of Sawan gas field integrated with petrophysical analysis: A case study from Lower Indus Basin, Pakistan
- 1 April 2023
- Published by KEAI Publishing in Energy Geoscience
- Vol. 4 (2)
Open Access2D seismic interpretation of Sawan gas field integrated with petrophysical analysis: A case study from Lower Indus Basin, Pakistan
- Open Access
- 4 October 2021
- Published by GeoScienceWorld in Lithosphere
- Vol. 2021 (Special 1)
Facies and Petrophysical Modeling of Triassic Chang 6 Tight Sandstone Reservoir, Heshui Oil Field, Ordos Basin, China
Tight sandstone reservoirs are widely distributed worldwide. The Upper Triassic Chang 6 member of the Yanchang Formation is characterized by low permeability and porosity. The facies model offers a unique approach for understanding the characteristics of various environments also heterogeneity, scale, and control of physical processes. The role of subsurface facies features and petrophysical properties was unclear. Notable insufficient research has been conducted based on facies and petrophysical modeling and that demands to refine the role of reservoir properties. To tackle this problem, a reservoir model is to be estimated using various combinations of property modeling algorithms for discrete (facies) and continuous (petrophysical) properties. Chang 6 member consists of three main facies, i.e., channel, lobe main body, and lobe margin facies. The current research is aimed at comparing the applicability and competitiveness of various facies and petrophysical modeling methods. Further, well-log data was utilized to interpret unique facies and petrophysical models to better understand the reservoir architecture. Methods for facies modeling include indicator kriging, multiple-point geostatistics, surface-based method, and sequential indicator simulation. Overall, the indicator kriging method preserved the local variability and accuracy, but some facies are smoothed out. The surface-based method showed far better results by showing the ability to reproduce the geometry, extent, connectivity, and facies association. The multiple-point geostatistics (MPG) model accurately presented the facies profiles, contacts, geometry, and geomorphological features. Sequential indicator simulation (SIS) honored the facies spatial distribution and input statistical parameters. The porosity model built using sequential Gaussian simulation (SGS) showed low porosity (74% values <2%). Gaussian random function simulation (GRFS) models showed very low average porosity (8%-10%) and low permeability (less than 0.1 mD). These methods indicate that Chang 6 member is a typical unconventional tight sandstone reservoir with ultralow values of petrophysical properties.
- 4 October 2021
- Published by GeoScienceWorld in Lithosphere
- Vol. 2021 (Special 1)
Open AccessFacies and Petrophysical Modeling of Triassic Chang 6 Tight Sandstone Reservoir, Heshui Oil Field, Ordos Basin, China
Tight sandstone reservoirs are widely distributed worldwide. The Upper Triassic Chang 6 member of the Yanchang Formation is characterized by low permeability and porosity. The facies model offers a unique approach for understanding the characteristics of various environments also heterogeneity, scale, and control of physical processes. The role of subsurface facies features and petrophysical properties was unclear. Notable insufficient research has been conducted based on facies and petrophysical modeling and that demands to refine the role of reservoir properties. To tackle this problem, a reservoir model is to be estimated using various combinations of property modeling algorithms for discrete (facies) and continuous (petrophysical) properties. Chang 6 member consists of three main facies, i.e., channel, lobe main body, and lobe margin facies. The current research is aimed at comparing the applicability and competitiveness of various facies and petrophysical modeling methods. Further, well-log data was utilized to interpret unique facies and petrophysical models to better understand the reservoir architecture. Methods for facies modeling include indicator kriging, multiple-point geostatistics, surface-based method, and sequential indicator simulation. Overall, the indicator kriging method preserved the local variability and accuracy, but some facies are smoothed out. The surface-based method showed far better results by showing the ability to reproduce the geometry, extent, connectivity, and facies association. The multiple-point geostatistics (MPG) model accurately presented the facies profiles, contacts, geometry, and geomorphological features. Sequential indicator simulation (SIS) honored the facies spatial distribution and input statistical parameters. The porosity model built using sequential Gaussian simulation (SGS) showed low porosity (74% values <2%). Gaussian random function simulation (GRFS) models showed very low average porosity (8%-10%) and low permeability (less than 0.1 mD). These methods indicate that Chang 6 member is a typical unconventional tight sandstone reservoir with ultralow values of petrophysical properties.
- Open Access
- 1 October 2021
- Published by KEAI Publishing in Energy Geoscience
- Vol. 2 (4) , 229-237
Subsurface geological model of sedimentary and metasedimentary wedge from Mansehra to Battal based on gravity data, Hazara area, Pakistan
- 1 October 2021
- Published by KEAI Publishing in Energy Geoscience
- Vol. 2 (4) , 229-237
Open AccessSubsurface geological model of sedimentary and metasedimentary wedge from Mansehra to Battal based on gravity data, Hazara area, Pakistan