Ananda Y. R.
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Ananda Y. R. has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Gaurav Trivedi
Indian Institute of Technology Guwahati
4 shared publications - Gadipelli Sriharsha Satyanarayan
Department of Electronics and Electrical Engineering, Indian Institute of Technology Guwahati, Guwahati, Assam, India
3 shared publications Nehal Raj
2 shared publicationsGaurav Trivedi
1 shared publication
Latest Publications
- Open Access
- 5 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
A Floating Memristor Emulator with Inverse Frequency Characteristic
This paper presents a novel memristor emulator with inverse frequency characteristics. This emulator is configured using only four NMOS transistors and an external capacitor. The proposed memristor emulator acts as a memristor and generates a pinched hysteresis loop (PHL). Its lobe area increases with an increase in the operating frequency. Its numerical analysis is performed using Cadence Virtuoso employing TSMC 180nm PDKs. The inverse frequency behaviour of the proposed memristor emulator is evaluated at different operating frequencies, temperatures, and other process corners. The correctness and reliability of the proposed emulator are validated through post-layout simulation. The area utilization and power consumption of the proposed emulator are 354.66 µm2 and 291.78 µW . Its functionality is verified by conducting a physical experiment using ALD1106 n-channel MOSFETs. Its applicability is further validated by designing a chaotic oscillator and a NOR gate.
- 5 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessA Floating Memristor Emulator with Inverse Frequency Characteristic
This paper presents a novel memristor emulator with inverse frequency characteristics. This emulator is configured using only four NMOS transistors and an external capacitor. The proposed memristor emulator acts as a memristor and generates a pinched hysteresis loop (PHL). Its lobe area increases with an increase in the operating frequency. Its numerical analysis is performed using Cadence Virtuoso employing TSMC 180nm PDKs. The inverse frequency behaviour of the proposed memristor emulator is evaluated at different operating frequencies, temperatures, and other process corners. The correctness and reliability of the proposed emulator are validated through post-layout simulation. The area utilization and power consumption of the proposed emulator are 354.66 µm2 and 291.78 µW . Its functionality is verified by conducting a physical experiment using ALD1106 n-channel MOSFETs. Its applicability is further validated by designing a chaotic oscillator and a NOR gate.
- 13 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 31 (3) , 355-368
A MOS-DTMOS Implementation of Floating Memristor Emulator for High-Frequency Applications
The work presented in this article focuses on designing a floating MOS-dynamic threshold voltage MOSFET (DTMOS)-based circuit to emulate a memristor. The proposed circuit consists of four transistors, including a DT-MOSFET and an external capacitor, which helps obtain high-frequency operations up to 3 MHz. This facilitates easier integration of the devices and monolithic IC fabrication. The correctness of the proposed emulator is validated by conducting various parametric analyses at different operating frequencies and process corners, and it generates acceptable pinched hysteresis loops (PHLs) at various frequencies. Furthermore, pre- and post-layout validation of the proposed emulator are also performed using Cadence Virtuoso with Taiwan Semiconductor Manufacturing Company (TSMC) 180-nm process design kits (PDKs) to prove its effectiveness as a memristor. The area and power consumption of the proposed emulator are $157.48~\mu \text {m}^{2}$ and $8.24~\mu \text {W}$ , respectively. The physical experiment of the proposed memristor emulator is performed using ALD $1106~n$ -channel MOSFETs to characterize its functionality as a real-life memristor. It is also used in designing a memristor-based application to showcase its applicability in power and area optimal circuit design.
- 13 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 31 (3) , 355-368
A MOS-DTMOS Implementation of Floating Memristor Emulator for High-Frequency Applications
The work presented in this article focuses on designing a floating MOS-dynamic threshold voltage MOSFET (DTMOS)-based circuit to emulate a memristor. The proposed circuit consists of four transistors, including a DT-MOSFET and an external capacitor, which helps obtain high-frequency operations up to 3 MHz. This facilitates easier integration of the devices and monolithic IC fabrication. The correctness of the proposed emulator is validated by conducting various parametric analyses at different operating frequencies and process corners, and it generates acceptable pinched hysteresis loops (PHLs) at various frequencies. Furthermore, pre- and post-layout validation of the proposed emulator are also performed using Cadence Virtuoso with Taiwan Semiconductor Manufacturing Company (TSMC) 180-nm process design kits (PDKs) to prove its effectiveness as a memristor. The area and power consumption of the proposed emulator are $157.48~\mu \text {m}^{2}$ and $8.24~\mu \text {W}$ , respectively. The physical experiment of the proposed memristor emulator is performed using ALD $1106~n$ -channel MOSFETs to characterize its functionality as a real-life memristor. It is also used in designing a memristor-based application to showcase its applicability in power and area optimal circuit design.
- 10 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 70 (3) , 1189-1193
A High Frequency MOS-Based Floating Charge-Controlled Memcapacitor Emulator
In this manuscript, a MOS-based memcapacitor emulator operating at 1.2 MHz is proposed. The analytical model of the proposed emulator is verified numerically and experimentally. Numerical analysis of the proposed memcapacitor with respect to various parameters is performed using Cadence Virtuoso with TSMC 180 nm PDKs followed by post-layout simulation, which also validates its correctness. Its area utilization and power consumption are 2077.85 μm2 and 2.726 mW, respectively. Its operating frequency is 1.71× higher than its nearest contemporary memcapacitor. Physical experiments are conducted utilizing CA3080 to establish the correctness of the proposed emulator.
- 10 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 70 (3) , 1189-1193
A High Frequency MOS-Based Floating Charge-Controlled Memcapacitor Emulator
In this manuscript, a MOS-based memcapacitor emulator operating at 1.2 MHz is proposed. The analytical model of the proposed emulator is verified numerically and experimentally. Numerical analysis of the proposed memcapacitor with respect to various parameters is performed using Cadence Virtuoso with TSMC 180 nm PDKs followed by post-layout simulation, which also validates its correctness. Its area utilization and power consumption are 2077.85 μm2 and 2.726 mW, respectively. Its operating frequency is 1.71× higher than its nearest contemporary memcapacitor. Physical experiments are conducted utilizing CA3080 to establish the correctness of the proposed emulator.
- 10 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Emerging and Selected Topics in Circuits and Systems
- Vol. 12 (4) , 793-803
An Optimized MOS-Based High Frequency Charge-Controlled Memcapacitor Emulator
In this manuscript, an optimized MOS-based memcapacitor emulator is proposed using active elements and a resistor. The correctness of the proposed emulator is validated by performing pre and post layout analyses using Cadence V irtuoso with TSMC 180 nm PDKs. Its area utilization and power consumption are 2034.65 μ m 2 and 1.86 mW , respectively. The maximum operating frequency of the proposed emulator is 24 MHz . It is 34×, 4×, and 8.189× better in terms of operating frequency, area, and power than its nearest contemporary memcapacitor emulator. A physical experiment is conducted to further verify the characteristics of the proposed emulator using CA 3080 analog ICs. An adaptive learning circuit using the proposed memcapacitor is designed to showcase its effectiveness for practical applications.
- 10 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Emerging and Selected Topics in Circuits and Systems
- Vol. 12 (4) , 793-803
An Optimized MOS-Based High Frequency Charge-Controlled Memcapacitor Emulator
In this manuscript, an optimized MOS-based memcapacitor emulator is proposed using active elements and a resistor. The correctness of the proposed emulator is validated by performing pre and post layout analyses using Cadence V irtuoso with TSMC 180 nm PDKs. Its area utilization and power consumption are 2034.65 μ m 2 and 1.86 mW , respectively. The maximum operating frequency of the proposed emulator is 24 MHz . It is 34×, 4×, and 8.189× better in terms of operating frequency, area, and power than its nearest contemporary memcapacitor emulator. A physical experiment is conducted to further verify the characteristics of the proposed emulator using CA 3080 analog ICs. An adaptive learning circuit using the proposed memcapacitor is designed to showcase its effectiveness for practical applications.
- 9 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Emerging and Selected Topics in Circuits and Systems
- Vol. 12 (4) , 774-784
A Flux Controlled MOS-Based Optimized High Frequency Meminductor Emulator
In this paper, we propose an optimized meminductor emulator for high frequency operations. For the first time, the proposed meminductor emulator is designed using only MOS transistors making it realizable using monolithic IC fabrication. The numerical analysis of the proposed meminductor is performed employing Cadence Virtuoso with TSMC 180 nm PDKs, and its behavior is verified with respect to different parameters, such as voltage, frequency, and process corner variations. Post layout analysis and physical experiments are also conducted to validate the proposed design. It is found that the area utilization and power consumption of the proposed meminductor are 2350.67 μ m 2 and 3.3 mW , respectively. Its maximum operating frequency is 20 MHz , and it is 3.42×, 2×, and 258× more efficient in terms of area utilization, maximum operating frequency, and power consumption, respectively, compared to its nearest contemporary meminductors. Further, the applicability of the proposed meminductor is also verified by designing a chaotic oscillator to exhibit its utility in a wide range of applications.
- 9 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Emerging and Selected Topics in Circuits and Systems
- Vol. 12 (4) , 774-784
A Flux Controlled MOS-Based Optimized High Frequency Meminductor Emulator
In this paper, we propose an optimized meminductor emulator for high frequency operations. For the first time, the proposed meminductor emulator is designed using only MOS transistors making it realizable using monolithic IC fabrication. The numerical analysis of the proposed meminductor is performed employing Cadence Virtuoso with TSMC 180 nm PDKs, and its behavior is verified with respect to different parameters, such as voltage, frequency, and process corner variations. Post layout analysis and physical experiments are also conducted to validate the proposed design. It is found that the area utilization and power consumption of the proposed meminductor are 2350.67 μ m 2 and 3.3 mW , respectively. Its maximum operating frequency is 20 MHz , and it is 3.42×, 2×, and 258× more efficient in terms of area utilization, maximum operating frequency, and power consumption, respectively, compared to its nearest contemporary meminductors. Further, the applicability of the proposed meminductor is also verified by designing a chaotic oscillator to exhibit its utility in a wide range of applications.