Rahime Cengiz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rahime Cengiz has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Muhammad Khizar Hayat
Department of Field Crops, Faculty of Agriculture, Sakarya University of Applied Sciences, Sakarya, Turkey
6 shared publications - Ferzat Turan
Sakarya Uygulamali Bilimler Universitesi
4 shared publications - Mehmet Öten
Sakarya Uygulamalı Bilimler Üniversitesi
4 shared publications - Muhammad Arif
Department of Plant Protection, Faculty of Agriculture, Sakarya University of Applied Sciences, Arifiye, Türkiye
4 shared publications - Bülent Cengi̇z
SAKARYA MISIR ARAŞTIRMA ENSTİTÜSÜ MÜDÜRLÜĞÜ
2 shared publications - Md. Nahid Mahmud
College of Agricultural Sciences, IUBAT- International University of Business Agriculture and Technology, Dhaka 1230, Bangladesh
2 shared publications
Latest Publications
- 15 November 2026
- Published by Ondokuz Mayis University in Black Sea Journal of Agriculture
- Vol. 9 (6) , 956-969
Multivariate Evaluation of Popping Quality and Bioactive Traits in Sorghum (Sorghum bicolor L.) under Ecological Conditions of Sakarya, Türkiye
Sorghum (Sorghum bicolor L.) is a climate-resilient, gluten-free cereal well suited for diverse food applications. However, its popping capacity is highly variable and cannot be adequately predicted by single-trait evaluations alone. This study assessed the agronomic performance, grain physical traits, popping behavior, and antioxidant properties of 34 USDA sorghum genotypes grown in Sakarya, Türkiye, during the 2023-2024 growing seasons using a multivariate analytical approach. The agronomic trials were conducted using a randomized complete block design with three replications. Popping performance was determined using hot-air and conventional hot-oil methods. Biochemical analyses showed total phenolic content ranging from 32.30 to 76.92 mg GAE 100 g⁻¹ dry matter, total flavonoid content from 10.62 to 27.20 mg QE 100 g⁻¹dry matter, DPPH radical scavenging activity from 47.7 to 91.9%, and phytic acid content from 21.4 to 26.8 mg 100 g⁻¹ dry matter. Grain physical properties varied considerably, with grain length ranging from 2.9 to 6.0 mm, grain width from 3.3 to 6.3 mm, grain thickness from 2.3 to 4.6 mm, and thousand-grain weight from 23.7 to 43.3 g. Hot-air popping efficiency ranged from 5.0 to 100.0%, whereas oil popping ranged from 8.9 to 87.6%. Correlation analysis revealed strong positive associations between plant height, internode length (r=0.805), and thousand-grain weight (r=0.673). Conversely, popping efficiency exhibited weak-to-moderate correlations with morphological traits and significant negative correlations with antioxidant-related biochemical traits (r=-0.410 to -0.422). Principal component analysis explained 57.5% of the total variation, with PC1 (34.1%) primarily associated with structural and technological traits and PC2 (23.4%) was primarily associated with biochemical and grain physical traits. Hierarchical clustering classified genotypes into three functional groups based on popping efficiency, bioactive richness, and vegetative vigor. Overall, the results indicate a trade-off between popping performance and antioxidant potential and provide useful information for selecting sorghum genotypes for snack and functional food applications.
- 15 November 2026
- Published by Ondokuz Mayis University in Black Sea Journal of Agriculture
- Vol. 9 (6) , 956-969
Multivariate Evaluation of Popping Quality and Bioactive Traits in Sorghum (Sorghum bicolor L.) under Ecological Conditions of Sakarya, Türkiye
Sorghum (Sorghum bicolor L.) is a climate-resilient, gluten-free cereal well suited for diverse food applications. However, its popping capacity is highly variable and cannot be adequately predicted by single-trait evaluations alone. This study assessed the agronomic performance, grain physical traits, popping behavior, and antioxidant properties of 34 USDA sorghum genotypes grown in Sakarya, Türkiye, during the 2023-2024 growing seasons using a multivariate analytical approach. The agronomic trials were conducted using a randomized complete block design with three replications. Popping performance was determined using hot-air and conventional hot-oil methods. Biochemical analyses showed total phenolic content ranging from 32.30 to 76.92 mg GAE 100 g⁻¹ dry matter, total flavonoid content from 10.62 to 27.20 mg QE 100 g⁻¹dry matter, DPPH radical scavenging activity from 47.7 to 91.9%, and phytic acid content from 21.4 to 26.8 mg 100 g⁻¹ dry matter. Grain physical properties varied considerably, with grain length ranging from 2.9 to 6.0 mm, grain width from 3.3 to 6.3 mm, grain thickness from 2.3 to 4.6 mm, and thousand-grain weight from 23.7 to 43.3 g. Hot-air popping efficiency ranged from 5.0 to 100.0%, whereas oil popping ranged from 8.9 to 87.6%. Correlation analysis revealed strong positive associations between plant height, internode length (r=0.805), and thousand-grain weight (r=0.673). Conversely, popping efficiency exhibited weak-to-moderate correlations with morphological traits and significant negative correlations with antioxidant-related biochemical traits (r=-0.410 to -0.422). Principal component analysis explained 57.5% of the total variation, with PC1 (34.1%) primarily associated with structural and technological traits and PC2 (23.4%) was primarily associated with biochemical and grain physical traits. Hierarchical clustering classified genotypes into three functional groups based on popping efficiency, bioactive richness, and vegetative vigor. Overall, the results indicate a trade-off between popping performance and antioxidant potential and provide useful information for selecting sorghum genotypes for snack and functional food applications.
- Open Access
- 30 September 2026
- Published by Springer Nature in Discover Robotics
- Vol. 2 (1) , 28
Trustworthy agricultural autonomy integrates robot learning safe control and human robot interaction
- 30 September 2026
- Published by Springer Nature in Discover Robotics
- Vol. 2 (1) , 28
Open AccessTrustworthy agricultural autonomy integrates robot learning safe control and human robot interaction
- Open Access
- 16 September 2026
- Published by Ataturk Universitesi in Research in Agricultural Sciences
- Vol. 57 (3) , 328-343
Legume Fodder in the Age of Climate Change: Resilience, Risks, and Revolutionary Solutions
Legume fodder crops are vital for sustainable agriculture and global food security because they fix nitrogen and enhance soil health. Legumes make up just 1.1% of the world's food supply, despite their many advantages. Cattle weight gain increases by 17% and milk output by 9.9% when forage legumes such as alfalfa and soybeans are integrated into livestock systems. But there is a serious threat from climate change. By 2050, yield decreases of 10-49% are predicted as a result of changes in precipitation and temperature. Elevated CO2 may promote growth, but it also causes a “dilution effect,” which lowers protein content by up to 30% and depletes vital micronutrients like iron (16%) and zinc (9.4%). A diversified approach is needed to reduce these dangers. Agronomic optimization, which involves modifying planting dates, densities, and water management, is one of the main interventions. ii) Soil and Pest Stewardship, which includes integrated pest management (IPM), reduced tillage, and cover crops. iii) Systemic innovation, which combines strong policy changes with genetic advancement through climate modeling. In order to maintain the nutritional value and productivity of legume systems and guarantee that they continue to be a vital component of the global food networks, such coordinated efforts are crucial.
- 16 September 2026
- Published by Ataturk Universitesi in Research in Agricultural Sciences
- Vol. 57 (3) , 328-343
Open AccessLegume Fodder in the Age of Climate Change: Resilience, Risks, and Revolutionary Solutions
Legume fodder crops are vital for sustainable agriculture and global food security because they fix nitrogen and enhance soil health. Legumes make up just 1.1% of the world's food supply, despite their many advantages. Cattle weight gain increases by 17% and milk output by 9.9% when forage legumes such as alfalfa and soybeans are integrated into livestock systems. But there is a serious threat from climate change. By 2050, yield decreases of 10-49% are predicted as a result of changes in precipitation and temperature. Elevated CO2 may promote growth, but it also causes a “dilution effect,” which lowers protein content by up to 30% and depletes vital micronutrients like iron (16%) and zinc (9.4%). A diversified approach is needed to reduce these dangers. Agronomic optimization, which involves modifying planting dates, densities, and water management, is one of the main interventions. ii) Soil and Pest Stewardship, which includes integrated pest management (IPM), reduced tillage, and cover crops. iii) Systemic innovation, which combines strong policy changes with genetic advancement through climate modeling. In order to maintain the nutritional value and productivity of legume systems and guarantee that they continue to be a vital component of the global food networks, such coordinated efforts are crucial.
- Open Access
- 30 July 2026
- Published by Turkish Science and Technology Publishing (TURSTEP) in Turkish Journal of Agriculture - Food Science and Technology
- Vol. 14 (7) , 1881-1894
Synergistic Herbicide Applications Enhance Alfalfa (Medicago sativa L.) Yield, Weed Suppression and Forage Quality
The livestock sector relies heavily on fodder crops, with alfalfa (Medicago sativa L.) being a prominent, high-nutritional-value legume in Southeast Asia. However, heavy weed infestation remains a major obstacle to quality production. This two-year study (2023–2024), evaluated the forage yield potential and nutritional quality of two alfalfa varieties (V1=Supersonic and V2=SGD-2002) under five weed control systems, including Weedy check (H0), Weed free (H1), Pendimethalin (H2), Flumetsulam (H3) and combination of both pre- and post-emergence application Pendimethalin + Flumetsulam (H4). Analysis of variance (ANOVA) across both seasons confirmed the highly significant effect of the herbicide factor on all yield and quality parameters, establishing weed control as the primary driver of productivity. The (H1) treatment consistently defined the biological maximum, achieving the highest fresh fodder yield (36.67 t ha-1) and superior quality (lowest Acid Detergent Fiber (ADF) and Neutral Detergent Fiber (NDF)). While, the (H0) resulted in severe yield loss, with minimum fresh fodder yield (12.15 t ha-1). Among the chemical applications, the (H4) was the most effective for production and suppression. This treatment consistently achieved the maximum fresh fodder yield (29.42 t ha-1) and the best weed control efficiency (up to 69%). However, the single application of (H2) performed best for nutritional quality, yielding maximum crude protein (20.33%) and lowest ADF among chemical controls. In conclusion, the (H4) combined herbicide strategy performed best overall, significantly suppressing weeds and maximizing crop productivity across both years, making it the most suitable chemical recommendation for high-yield alfalfa production.
- 30 July 2026
- Published by Turkish Science and Technology Publishing (TURSTEP) in Turkish Journal of Agriculture - Food Science and Technology
- Vol. 14 (7) , 1881-1894
Open AccessSynergistic Herbicide Applications Enhance Alfalfa (Medicago sativa L.) Yield, Weed Suppression and Forage Quality
The livestock sector relies heavily on fodder crops, with alfalfa (Medicago sativa L.) being a prominent, high-nutritional-value legume in Southeast Asia. However, heavy weed infestation remains a major obstacle to quality production. This two-year study (2023–2024), evaluated the forage yield potential and nutritional quality of two alfalfa varieties (V1=Supersonic and V2=SGD-2002) under five weed control systems, including Weedy check (H0), Weed free (H1), Pendimethalin (H2), Flumetsulam (H3) and combination of both pre- and post-emergence application Pendimethalin + Flumetsulam (H4). Analysis of variance (ANOVA) across both seasons confirmed the highly significant effect of the herbicide factor on all yield and quality parameters, establishing weed control as the primary driver of productivity. The (H1) treatment consistently defined the biological maximum, achieving the highest fresh fodder yield (36.67 t ha-1) and superior quality (lowest Acid Detergent Fiber (ADF) and Neutral Detergent Fiber (NDF)). While, the (H0) resulted in severe yield loss, with minimum fresh fodder yield (12.15 t ha-1). Among the chemical applications, the (H4) was the most effective for production and suppression. This treatment consistently achieved the maximum fresh fodder yield (29.42 t ha-1) and the best weed control efficiency (up to 69%). However, the single application of (H2) performed best for nutritional quality, yielding maximum crude protein (20.33%) and lowest ADF among chemical controls. In conclusion, the (H4) combined herbicide strategy performed best overall, significantly suppressing weeds and maximizing crop productivity across both years, making it the most suitable chemical recommendation for high-yield alfalfa production.
- Open Access
- 17 July 2026
- Published by Springer Nature in Discover Soil
- Vol. 3 (1)
Assessing microplastic translocation from contaminated agricultural soils to food crops
- 17 July 2026
- Published by Springer Nature in Discover Soil
- Vol. 3 (1)
Open AccessAssessing microplastic translocation from contaminated agricultural soils to food crops
- 10 July 2026
- Published by Turkish Journal of Range and Forage Science, Society of Range and Forage Science in Turkish Journal of Range and Forage Science
- Vol. 7 (1) , 21-46
Impact of Drought Stress on Root System Architecture and Anatomical Adaptations in Forages: A Comprehensive Review
Drought stress represents the most significant threat to global forage productivity, necessitating a robust understanding of adaptive belowground mechanisms. This paper highlights the critical advancements in root system architecture (RSA) and root vascular architecture that underpin resilience in forages. Under water-limited conditions, forages exhibit substantial morphological plasticity, characterized by a 20-40% increase in primary root elongation and a strategic rise in root-to-shoot ratios to prioritize deep-layer moisture acquisition. Anatomically, they optimize hydraulic safety through a 10-40% reduction in xylem vessel diameter, which enhances embolism resistance by 20-35% despite a minor decline in hydraulic conductivity. Metabolic efficiency is further bolstered by the development of root cortical aerenchyma, which reduces cortical area by 30-50% and lowers maintenance respiration costs by up to 60%. Parallel to these metabolic shifts, the reinforcement of endodermal barriers specifically 1.5-2 times thickening of the Casparian strip and a 1.5-2.2 times elongation of root hairs maximizes water-use efficiency and soil-root contact. The review further examines the physiological drivers of these changes, indicating that moderate ABA accumulation can contribute to the maintenance or stimulation of primary root elongation under stress, with reported increases of 20–40% depending on genotype and environmental conditions. By integrating these multi-scale traits with high-throughput phenotyping and symbiotic interactions, this paper provides a framework for breeding climate-resilient forage ideotypes essential for sustaining livestock systems and global soil carbon stocks.
- 10 July 2026
- Published by Turkish Journal of Range and Forage Science, Society of Range and Forage Science in Turkish Journal of Range and Forage Science
- Vol. 7 (1) , 21-46
Impact of Drought Stress on Root System Architecture and Anatomical Adaptations in Forages: A Comprehensive Review
Drought stress represents the most significant threat to global forage productivity, necessitating a robust understanding of adaptive belowground mechanisms. This paper highlights the critical advancements in root system architecture (RSA) and root vascular architecture that underpin resilience in forages. Under water-limited conditions, forages exhibit substantial morphological plasticity, characterized by a 20-40% increase in primary root elongation and a strategic rise in root-to-shoot ratios to prioritize deep-layer moisture acquisition. Anatomically, they optimize hydraulic safety through a 10-40% reduction in xylem vessel diameter, which enhances embolism resistance by 20-35% despite a minor decline in hydraulic conductivity. Metabolic efficiency is further bolstered by the development of root cortical aerenchyma, which reduces cortical area by 30-50% and lowers maintenance respiration costs by up to 60%. Parallel to these metabolic shifts, the reinforcement of endodermal barriers specifically 1.5-2 times thickening of the Casparian strip and a 1.5-2.2 times elongation of root hairs maximizes water-use efficiency and soil-root contact. The review further examines the physiological drivers of these changes, indicating that moderate ABA accumulation can contribute to the maintenance or stimulation of primary root elongation under stress, with reported increases of 20–40% depending on genotype and environmental conditions. By integrating these multi-scale traits with high-throughput phenotyping and symbiotic interactions, this paper provides a framework for breeding climate-resilient forage ideotypes essential for sustaining livestock systems and global soil carbon stocks.
- Open Access
- 1 January 2026
- Published by ScopeMed in Plant Trends
- Vol. 4 (3) , 124-142
Leveraging molecular tools for cereal breeding: Progress, limitations, and prospects
Rice, wheat, and maize cereals are the major foundation of global food security. However, climate change makes it more challenging to achieve high crop yield, the challenge occurs due to improper management of cereal diseases and pests, and limitations of traditional breeding processes. This study aimed to update the process, limitations, and prospects of molecular tools for cereal breeding, and to explore the significance of marker-assisted selection, marker-assisted backcrossing, gene pyramiding, genomic selection, and modern breeding for improving yield, stress tolerance, and grain quality of cereals. Based on recent studies, we have explored the advances and applications of high-throughput genotyping platforms like the single nucleotide polymorphism (SNP) array and genotyping by sequencing technology in cereals. In this study, we found several limitations, such as a low number of studies with large amounts of data, genotype-environment interactions, lack of study findings at the field level, cost implications, and integration of complex multi-omics data. This study further reveals that many crucial agronomic traits are polygenic in their mode of inheritance, and the hidden genetic links make selection weak and uncertain. However, the application of molecular tools such as CRISPR/Cas genome editing, speed breeding, pan-genomics, artificial intelligence, and high-throughput phenomics provides sustainable solutions to these challenges in cereal improvement. The application of these modern breeding tools, combined with microbiome-assisted breeding and agricultural technologies in precision cereal breeding, opens new opportunities for enhancing yield and climate-smart, sustainable cereal production for global food and nutrition security.
- 1 January 2026
- Published by ScopeMed in Plant Trends
- Vol. 4 (3) , 124-142
Open AccessLeveraging molecular tools for cereal breeding: Progress, limitations, and prospects
Rice, wheat, and maize cereals are the major foundation of global food security. However, climate change makes it more challenging to achieve high crop yield, the challenge occurs due to improper management of cereal diseases and pests, and limitations of traditional breeding processes. This study aimed to update the process, limitations, and prospects of molecular tools for cereal breeding, and to explore the significance of marker-assisted selection, marker-assisted backcrossing, gene pyramiding, genomic selection, and modern breeding for improving yield, stress tolerance, and grain quality of cereals. Based on recent studies, we have explored the advances and applications of high-throughput genotyping platforms like the single nucleotide polymorphism (SNP) array and genotyping by sequencing technology in cereals. In this study, we found several limitations, such as a low number of studies with large amounts of data, genotype-environment interactions, lack of study findings at the field level, cost implications, and integration of complex multi-omics data. This study further reveals that many crucial agronomic traits are polygenic in their mode of inheritance, and the hidden genetic links make selection weak and uncertain. However, the application of molecular tools such as CRISPR/Cas genome editing, speed breeding, pan-genomics, artificial intelligence, and high-throughput phenomics provides sustainable solutions to these challenges in cereal improvement. The application of these modern breeding tools, combined with microbiome-assisted breeding and agricultural technologies in precision cereal breeding, opens new opportunities for enhancing yield and climate-smart, sustainable cereal production for global food and nutrition security.
- Open Access
- 15 July 2025
- Published by Ondokuz Mayis University in Black Sea Journal of Agriculture
- Vol. 8 (4) , 556-562
Determination of the Effect of Chinaberry Tree (Melia azedarach L.) Leaf and Fruit Extracts on Germination of Maize (Zea mays L.) Seeds Infected with Fusarium verticillioides
Maize (Zea mays L.) is one of the important and basic cereal crops in the world. Fusarium verticillioides is one of the most important pathogens causing root, stalk, ear rot, and seedling blight diseases in maize. In recent years, the restriction of the use of most chemical fungicides has led to the importance of research on plant resistance inducers. Different parts of the Melia azedarach L., such as bark, leaf, seeds, and root have very strong medicinal value, and the seeds of this species can also be used in the production of fungicides and pesticides in agricultural products. In this study investigated the effects of Melia azedarach leaf and fruit extracts on Kale (F1) corn seeds infected with Fusarium verticillioides. Six different applications (Positive Control, Negative Control, Fruit Extract, Leaf Extract, Fruit Extract + GA3, Leaf Extract + GA3) were established in a randomized plot design with three replications. According to the results, the highest value for germination rate on the 3rd day was 67.78% in the negative control group, and the highest value for germination rate on the 7th day was obtained in the positive control 77.77% and negative control 74.44%. In terms of Fusarium contamination rates, the highest values on the 3rd and 7th days were found to be 36.67% and 50.00% in the fruit extract group, respectively. Root length was determined as the highest value at 47.03 mm in the leaf extract group and the lowest value at 16.00 mm in the fruit extract + GA3 group. In shoot length, leaf extract gave the best results at 57.13 mm and leaf extract + GA3 as 49.23 mm. The findings show that Melia azedarach extracts have positive effects on germination and growth in Fusarium-infected seeds. It is thought that this natural solution may provide positive contributions to maize cultivation.
- 15 July 2025
- Published by Ondokuz Mayis University in Black Sea Journal of Agriculture
- Vol. 8 (4) , 556-562
Open AccessDetermination of the Effect of Chinaberry Tree (Melia azedarach L.) Leaf and Fruit Extracts on Germination of Maize (Zea mays L.) Seeds Infected with Fusarium verticillioides
Maize (Zea mays L.) is one of the important and basic cereal crops in the world. Fusarium verticillioides is one of the most important pathogens causing root, stalk, ear rot, and seedling blight diseases in maize. In recent years, the restriction of the use of most chemical fungicides has led to the importance of research on plant resistance inducers. Different parts of the Melia azedarach L., such as bark, leaf, seeds, and root have very strong medicinal value, and the seeds of this species can also be used in the production of fungicides and pesticides in agricultural products. In this study investigated the effects of Melia azedarach leaf and fruit extracts on Kale (F1) corn seeds infected with Fusarium verticillioides. Six different applications (Positive Control, Negative Control, Fruit Extract, Leaf Extract, Fruit Extract + GA3, Leaf Extract + GA3) were established in a randomized plot design with three replications. According to the results, the highest value for germination rate on the 3rd day was 67.78% in the negative control group, and the highest value for germination rate on the 7th day was obtained in the positive control 77.77% and negative control 74.44%. In terms of Fusarium contamination rates, the highest values on the 3rd and 7th days were found to be 36.67% and 50.00% in the fruit extract group, respectively. Root length was determined as the highest value at 47.03 mm in the leaf extract group and the lowest value at 16.00 mm in the fruit extract + GA3 group. In shoot length, leaf extract gave the best results at 57.13 mm and leaf extract + GA3 as 49.23 mm. The findings show that Melia azedarach extracts have positive effects on germination and growth in Fusarium-infected seeds. It is thought that this natural solution may provide positive contributions to maize cultivation.
- Open Access
- 30 June 2025
- Published by Sakarya University of Applied Sciences in Journal of Agricultural Biotechnology
- Vol. 6 (1) , 23-31
Farklı Katkı Maddeleri ile Yapılan Koçanlı ve Koçansız Mısır (Zea mays L.) Silajının Kalite Özelliklerinin Belirlenmesi
Bu çalışma; koçanlı ve koçansız mısır silajına ilave edilen farklı katkı maddelerinin silaj kalite özellikleri üzerindeki etkilerini belirlemek amacıyla, Sakarya Uygulamalı Bilimler Üniversitesi Tarım Bilimleri ve Teknolojileri Eğitimi Uygulama ve Araştırma Merkezi arazisinde 2023 yılında yürütülmüştür. Çalışmada, FAO 700 olum grubuna ait Kale silajlık mısır çeşidi kullanılmıştır. Koçanlı ve koçansız bitkilerden ayrı ayrı hazırlanan materyallere katkı maddesi olarak; arpa kırması, melâs, peyniraltı suyu ve üre ilave edilerek silaj yapılmıştır. Araştırma, Tesadüf Blokları Deneme Deseni'ne göre üç tekerrürlü olarak yürütülmüştür. Doğrudan güneş ışığı almayan kapalı ve kuru bir ortamda, 25±2 °C sıcaklıkta muhafaza koşullarında 60 günlük fermantasyon süresi sonunda açılan silajlarda; kuru madde oranı ve pH değerinden yararlanılarak Flieg puanları hesaplanırken, renk, koku ve strüktür verilerinden yararlanılarak da fiziksel analiz değerlendirmesi DLG (Deutsche Landwirtschafts Gesellschaft)’ye göre ortaya konulmuştur. Elde edilen bulgulara göre; en düşük kuru madde oranı %32.5 ile koçansız peyniraltı suyu ilave edilen silajlarda, en yüksek değer ise %45.5 ile koçanlı melâs katkı maddeli silajlarda gözlemlenmiştir. pH değeri açısından 3.82 ile koçanlı melâs karışımı en düşük değere sahip olurken, koçansız üre karışımında 5.59 ile en yüksek değer tespit edilmiştir. Fiziksel analiz kriterleri skorlarına göre, koçanlı üre karışımlı silaj hariç tüm örnekler genel olarak orta ve iyi sınıfta yer almıştır. Buna bağlı olarak; katkı maddelerinden üre uygulaması hariç diğer katkı maddelerinin koçanlı ve koçansız silaj kalitesi üzerinde olumlu etki gösterdeği söylenebilir.
- 30 June 2025
- Published by Sakarya University of Applied Sciences in Journal of Agricultural Biotechnology
- Vol. 6 (1) , 23-31
Open AccessFarklı Katkı Maddeleri ile Yapılan Koçanlı ve Koçansız Mısır (Zea mays L.) Silajının Kalite Özelliklerinin Belirlenmesi
Bu çalışma; koçanlı ve koçansız mısır silajına ilave edilen farklı katkı maddelerinin silaj kalite özellikleri üzerindeki etkilerini belirlemek amacıyla, Sakarya Uygulamalı Bilimler Üniversitesi Tarım Bilimleri ve Teknolojileri Eğitimi Uygulama ve Araştırma Merkezi arazisinde 2023 yılında yürütülmüştür. Çalışmada, FAO 700 olum grubuna ait Kale silajlık mısır çeşidi kullanılmıştır. Koçanlı ve koçansız bitkilerden ayrı ayrı hazırlanan materyallere katkı maddesi olarak; arpa kırması, melâs, peyniraltı suyu ve üre ilave edilerek silaj yapılmıştır. Araştırma, Tesadüf Blokları Deneme Deseni'ne göre üç tekerrürlü olarak yürütülmüştür. Doğrudan güneş ışığı almayan kapalı ve kuru bir ortamda, 25±2 °C sıcaklıkta muhafaza koşullarında 60 günlük fermantasyon süresi sonunda açılan silajlarda; kuru madde oranı ve pH değerinden yararlanılarak Flieg puanları hesaplanırken, renk, koku ve strüktür verilerinden yararlanılarak da fiziksel analiz değerlendirmesi DLG (Deutsche Landwirtschafts Gesellschaft)’ye göre ortaya konulmuştur. Elde edilen bulgulara göre; en düşük kuru madde oranı %32.5 ile koçansız peyniraltı suyu ilave edilen silajlarda, en yüksek değer ise %45.5 ile koçanlı melâs katkı maddeli silajlarda gözlemlenmiştir. pH değeri açısından 3.82 ile koçanlı melâs karışımı en düşük değere sahip olurken, koçansız üre karışımında 5.59 ile en yüksek değer tespit edilmiştir. Fiziksel analiz kriterleri skorlarına göre, koçanlı üre karışımlı silaj hariç tüm örnekler genel olarak orta ve iyi sınıfta yer almıştır. Buna bağlı olarak; katkı maddelerinden üre uygulaması hariç diğer katkı maddelerinin koçanlı ve koçansız silaj kalitesi üzerinde olumlu etki gösterdeği söylenebilir.
- 1 September 2023
- Published by Ondokuz Mayis University in Black Sea Journal of Agriculture
- Vol. 6 (5) , 528-532
The Effect of Donors Used in In vivo Maternal Haploid Technique on Haploid Induction Rate
Maize is an important plant grown to obtain grain and silage, and is used in human and animal nutrition. In conventional maize breeding studies, inbred line development studies are carried out for at least 7 years if a single generation is obtained in a year, while it is possible to develop 100% homozygous lines in a short period of 2 years with the in vivo maternal haploid technique. The in vivo maternal haploid technique is widely used in advanced maize breeding programs. The choice of donor or source material to be used for haploid induction depends on the purpose of the breeding program. Generally, breeders use F1 or F2 populations as source material for haploid induction. In this study; 30 F1 genotypes and their F2s were crossed with the inducer line. The putative haploid seed was identified by considering the R1-nj color marker, and the haploid induction rate was determined. The effect of the generations of the donor genotypes on the haploid induction rate was compared by performing an independent sample test, and the haploid induction rate obtained from the F1 donors was found to be higher than the haploid induction rate of the F2 donors. It was determined that there was a change in the haploid induction rate as the genotypes changed within the F1 and F2 donor groups.
- 1 September 2023
- Published by Ondokuz Mayis University in Black Sea Journal of Agriculture
- Vol. 6 (5) , 528-532
The Effect of Donors Used in In vivo Maternal Haploid Technique on Haploid Induction Rate
Maize is an important plant grown to obtain grain and silage, and is used in human and animal nutrition. In conventional maize breeding studies, inbred line development studies are carried out for at least 7 years if a single generation is obtained in a year, while it is possible to develop 100% homozygous lines in a short period of 2 years with the in vivo maternal haploid technique. The in vivo maternal haploid technique is widely used in advanced maize breeding programs. The choice of donor or source material to be used for haploid induction depends on the purpose of the breeding program. Generally, breeders use F1 or F2 populations as source material for haploid induction. In this study; 30 F1 genotypes and their F2s were crossed with the inducer line. The putative haploid seed was identified by considering the R1-nj color marker, and the haploid induction rate was determined. The effect of the generations of the donor genotypes on the haploid induction rate was compared by performing an independent sample test, and the haploid induction rate obtained from the F1 donors was found to be higher than the haploid induction rate of the F2 donors. It was determined that there was a change in the haploid induction rate as the genotypes changed within the F1 and F2 donor groups.