KKKonstantin Krüger

Konstantin Krüger

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Konstantin Krüger has a total of 47 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Validation of cloud macrophysical properties from the ATLID Level 2a products A-TC, A-FM, A-CTH using airborne lidar observations during the HALO missions PERCUSION, ASCCI and NAWDIC

    by Konstantin Krüger, Martin Wirth, Athena Augusta Floutsi, David Patrick Donovan, Gerd-Jan van Zadelhoff, Silke Martha Groß

    The Earth Cloud, Aerosol, and Radiation Explors (EarthCARE) satellite mission aims to improve our understanding of cloud–aerosol–radiation interactions in the Earth's climate system. Its Atmospheric Lidar (ATLID) instrument aboard EarthCARE provides important observational data for determining the properties of clouds and aerosols; therefore, thorough validation of ATLID products is a prerequisite for their reliable scientific use. This study evaluates the reliability of selected parameters applicable to study cloud macrophysical properties of three ATLID single-sensor Level 2 products: The “simple classification” of the ATLID Target Classification (A-TC) product, the “feature mask” of the ATLID Feature Mask (A-FM) product, and the “cloud top height” of the ATLID Cloud Top Height (A-CTH) product. We present an independent validation using a comprehensive multi-campaign dataset of airborne high spectral resolution lidar (HSRL) backscatter ratio (BSR) measurements. During each flight at least one coordinated underpass underneath EarthCARE was conducted ensuring high spatial and temporal matching of the spaceborne and airborne lidars. The dataset spans a wide range of tropical and extratropical cloud regimes, enabling robust assessment under diverse atmospheric conditions. The evaluation addresses two main objectives: (i) assessing how well A-TC and A-FM represent the vertical cloud distribution compared to the airborne HSRL observations, and (ii) quantifying the accuracy of A-CTH cloud top heights for different classes of cloud regimes. In general, the vertical cloud distribution observed from the airborne data is well captured by both A-TC and A-FM. However, we found a systematic overestimation of ice cloud pixels by A-TC in Baseline BA. This overestimation is caused by ice clouds that are horizontally and vertically too large, but also, to a certain extent, by aerosol pixels incorrectly classified as ice clouds (at temperature > 0 °C), and to a spurious occurrence of stratospheric aerosol features near the tropopause. A-TC liquid clouds are in very good agreement with the airborne observations. A-CTH exhibits a consistent positive bias in cloud top height of almost 300 m across different cloud regimes, along with occasional low-altitude cloud top detections, particularly over ocean surfaces, suggesting issues in surface assignment. The presented results primarily reflect Baseline BA, while first comparisons with Baseline BC/BD indicate improvements in future processing baselines, including a reduction of low-cloud artefacts in A-CTH, improved cloud phase representation in A-TC, and a strong reduction of misclassified ice clouds in aerosol layers at temperatures > 0 °C. Altogether, the validated ATLID Level 2 products demonstrate a high ability to realistically represent key macrophysical cloud properties – including cloud cover and cloud top height – which confirms their suitability for scientific applications. The identified limitations in the performance of the BA and BC baselines can help users make optimal use of these datasets, point to expected improvements in the upcoming CA baseline, and may support the further refinement of the ATLID Level 2 products.

  • Open Access

    Reply on RC2

    by Konstantin Krüger, Martin Wirth, Athena Augusta Floutsi, David Patrick Donovan, Gerd-Jan van Zadelhoff, Silke Martha Groß

    The Earth Cloud, Aerosol, and Radiation Explors (EarthCARE) satellite mission aims to improve our understanding of cloud–aerosol–radiation interactions in the Earth’s climate system. The Atmospheric Lidar (ATLID) instrument aboard EarthCARE provides important observational data for determining the properties of clouds and aerosols; therefore, thorough validation of ATLID products is a prerequisite for their reliable scientific use. This study evaluates the reliability of selected parameters applicable to study cloud macrophysical properties of three ATLID single-sensor Level 2 products: The ‘simple classification’ of the ATLID Target Classification (A-TC) product, the ‘feature mask’ of the ATLID Feature Mask (A-FM) product, and the ‘cloud top height’ of the ATLID Cloud Top Height (A-CTH) product. We present an independent validation using a comprehensive multi-campaign dataset of airborne high spectral resolution lidar (HSRL) backscatter ratio (BSR) measurements. During each flight at least one coordinated underpass underneath EarthCARE ground track was conducted ensuring high spatial and temporal matching of the spaceborne and airborne lidars. The dataset spans a wide range of tropical and extratropical cloud regimes, enabling robust assessment under diverse atmospheric conditions. The evaluation addresses two main objectives: (i) assessing how well A-TC and A-FM represent the vertical cloud distribution compared to the airborne HSRL observations, and (ii) quantifying the accuracy of A-CTH cloud top heights for different classes of cloud regimes. In general, the vertical cloud distribution observed from the airborne data is well captured by both A-TC and A-FM products. However, we found a systematic overestimation of ice clouds by A-TC in Baseline BA. This overestimation is related to spreading effects in the retrieval, but also to some extent to misclassified aerosol pixels as ice clouds (at temperatures >0 °C), and to a spurious occurrence of stratospheric aerosol features near the tropopause. A-TC liquid cloud fractions show very good agreement with airborne observations. A-CTH exhibits a consistent positive bias in cloud top height of almost 300 m across different cloud regimes, along with occasional low-altitude cloud top detections, particularly over ocean surfaces, suggesting issues in surface assignment. The presented results primarily reflect Baseline BA, while first comparisons with Baseline BC and a prototype version of Baseline CA indicate improvements in future processing baselines, including a reduction of low-cloud artefacts in A-CTH, improved cloud phase representation in A-TC, and a strong reduction of misclassified ice clouds in aerosol layers at temperatures >0 °C. Altogether, the validated ATLID Level 2 products demonstrate a high ability to realistically represent key macrophysical cloud properties—including cloud cover and cloud top height—which confirms their suitability for scientific applications. The identified limitations in the performance of the BA and BC baselines can help users make optimal use of these datasets, point to expected improvements in the upcoming CA baseline, and may support the further refinement of the ATLID Level 2 products.

  • Open Access

    Reply on RC1

    by Konstantin Krüger, Martin Wirth, Athena Augusta Floutsi, David Patrick Donovan, Gerd-Jan van Zadelhoff, Silke Martha Groß

    The Earth Cloud, Aerosol, and Radiation Explors (EarthCARE) satellite mission aims to improve our understanding of cloud–aerosol–radiation interactions in the Earth’s climate system. The Atmospheric Lidar (ATLID) instrument aboard EarthCARE provides important observational data for determining the properties of clouds and aerosols; therefore, thorough validation of ATLID products is a prerequisite for their reliable scientific use. This study evaluates the reliability of selected parameters applicable to study cloud macrophysical properties of three ATLID single-sensor Level 2 products: The ‘simple classification’ of the ATLID Target Classification (A-TC) product, the ‘feature mask’ of the ATLID Feature Mask (A-FM) product, and the ‘cloud top height’ of the ATLID Cloud Top Height (A-CTH) product. We present an independent validation using a comprehensive multi-campaign dataset of airborne high spectral resolution lidar (HSRL) backscatter ratio (BSR) measurements. During each flight at least one coordinated underpass underneath EarthCARE ground track was conducted ensuring high spatial and temporal matching of the spaceborne and airborne lidars. The dataset spans a wide range of tropical and extratropical cloud regimes, enabling robust assessment under diverse atmospheric conditions. The evaluation addresses two main objectives: (i) assessing how well A-TC and A-FM represent the vertical cloud distribution compared to the airborne HSRL observations, and (ii) quantifying the accuracy of A-CTH cloud top heights for different classes of cloud regimes. In general, the vertical cloud distribution observed from the airborne data is well captured by both A-TC and A-FM products. However, we found a systematic overestimation of ice clouds by A-TC in Baseline BA. This overestimation is related to spreading effects in the retrieval, but also to some extent to misclassified aerosol pixels as ice clouds (at temperatures >0 °C), and to a spurious occurrence of stratospheric aerosol features near the tropopause. A-TC liquid cloud fractions show very good agreement with airborne observations. A-CTH exhibits a consistent positive bias in cloud top height of almost 300 m across different cloud regimes, along with occasional low-altitude cloud top detections, particularly over ocean surfaces, suggesting issues in surface assignment. The presented results primarily reflect Baseline BA, while first comparisons with Baseline BC and a prototype version of Baseline CA indicate improvements in future processing baselines, including a reduction of low-cloud artefacts in A-CTH, improved cloud phase representation in A-TC, and a strong reduction of misclassified ice clouds in aerosol layers at temperatures >0 °C. Altogether, the validated ATLID Level 2 products demonstrate a high ability to realistically represent key macrophysical cloud properties—including cloud cover and cloud top height—which confirms their suitability for scientific applications. The identified limitations in the performance of the BA and BC baselines can help users make optimal use of these datasets, point to expected improvements in the upcoming CA baseline, and may support the further refinement of the ATLID Level 2 products.

  • Open Access

    Comment on egusphere-2026-3051

    by Konstantin Krüger, Martin Wirth, Athena Augusta Floutsi, David Patrick Donovan, Gerd-Jan van Zadelhoff, Silke Martha Groß

    The Earth Cloud, Aerosol, and Radiation Explors (EarthCARE) satellite mission aims to improve our understanding of cloud–aerosol–radiation interactions in the Earth’s climate system. The Atmospheric Lidar (ATLID) instrument aboard EarthCARE provides important observational data for determining the properties of clouds and aerosols; therefore, thorough validation of ATLID products is a prerequisite for their reliable scientific use. This study evaluates the reliability of selected parameters applicable to study cloud macrophysical properties of three ATLID single-sensor Level 2 products: The ‘simple classification’ of the ATLID Target Classification (A-TC) product, the ‘feature mask’ of the ATLID Feature Mask (A-FM) product, and the ‘cloud top height’ of the ATLID Cloud Top Height (A-CTH) product. We present an independent validation using a comprehensive multi-campaign dataset of airborne high spectral resolution lidar (HSRL) backscatter ratio (BSR) measurements. During each flight at least one coordinated underpass underneath EarthCARE ground track was conducted ensuring high spatial and temporal matching of the spaceborne and airborne lidars. The dataset spans a wide range of tropical and extratropical cloud regimes, enabling robust assessment under diverse atmospheric conditions. The evaluation addresses two main objectives: (i) assessing how well A-TC and A-FM represent the vertical cloud distribution compared to the airborne HSRL observations, and (ii) quantifying the accuracy of A-CTH cloud top heights for different classes of cloud regimes. In general, the vertical cloud distribution observed from the airborne data is well captured by both A-TC and A-FM products. However, we found a systematic overestimation of ice clouds by A-TC in Baseline BA. This overestimation is related to spreading effects in the retrieval, but also to some extent to misclassified aerosol pixels as ice clouds (at temperatures >0 °C), and to a spurious occurrence of stratospheric aerosol features near the tropopause. A-TC liquid cloud fractions show very good agreement with airborne observations. A-CTH exhibits a consistent positive bias in cloud top height of almost 300 m across different cloud regimes, along with occasional low-altitude cloud top detections, particularly over ocean surfaces, suggesting issues in surface assignment. The presented results primarily reflect Baseline BA, while first comparisons with Baseline BC and a prototype version of Baseline CA indicate improvements in future processing baselines, including a reduction of low-cloud artefacts in A-CTH, improved cloud phase representation in A-TC, and a strong reduction of misclassified ice clouds in aerosol layers at temperatures >0 °C. Altogether, the validated ATLID Level 2 products demonstrate a high ability to realistically represent key macrophysical cloud properties—including cloud cover and cloud top height—which confirms their suitability for scientific applications. The identified limitations in the performance of the BA and BC baselines can help users make optimal use of these datasets, point to expected improvements in the upcoming CA baseline, and may support the further refinement of the ATLID Level 2 products.

  • Open Access

    Validation of cloud macrophysical properties from the ATLID Level 2a products A-TC, A-FM, A-CTH using airborne lidar observations during the HALO missions PERCUSION, ASCCI and NAWDIC

    by Konstantin Krüger, Martin Wirth, Athena Augusta Floutsi, David Patrick Donovan, Gerd-Jan van Zadelhoff, Silke Martha Groß

    The Earth Cloud, Aerosol, and Radiation Explors (EarthCARE) satellite mission aims to improve our understanding of cloud–aerosol–radiation interactions in the Earth’s climate system. The Atmospheric Lidar (ATLID) instrument aboard EarthCARE provides important observational data for determining the properties of clouds and aerosols; therefore, thorough validation of ATLID products is a prerequisite for their reliable scientific use. This study evaluates the reliability of selected parameters applicable to study cloud macrophysical properties of three ATLID single-sensor Level 2 products: The ‘simple classification’ of the ATLID Target Classification (A-TC) product, the ‘feature mask’ of the ATLID Feature Mask (A-FM) product, and the ‘cloud top height’ of the ATLID Cloud Top Height (A-CTH) product. We present an independent validation using a comprehensive multi-campaign dataset of airborne high spectral resolution lidar (HSRL) backscatter ratio (BSR) measurements. During each flight at least one coordinated underpass underneath EarthCARE ground track was conducted ensuring high spatial and temporal matching of the spaceborne and airborne lidars. The dataset spans a wide range of tropical and extratropical cloud regimes, enabling robust assessment under diverse atmospheric conditions. The evaluation addresses two main objectives: (i) assessing how well A-TC and A-FM represent the vertical cloud distribution compared to the airborne HSRL observations, and (ii) quantifying the accuracy of A-CTH cloud top heights for different classes of cloud regimes. In general, the vertical cloud distribution observed from the airborne data is well captured by both A-TC and A-FM products. However, we found a systematic overestimation of ice clouds by A-TC in Baseline BA. This overestimation is related to spreading effects in the retrieval, but also to some extent to misclassified aerosol pixels as ice clouds (at temperatures >0 °C), and to a spurious occurrence of stratospheric aerosol features near the tropopause. A-TC liquid cloud fractions show very good agreement with airborne observations. A-CTH exhibits a consistent positive bias in cloud top height of almost 300 m across different cloud regimes, along with occasional low-altitude cloud top detections, particularly over ocean surfaces, suggesting issues in surface assignment. The presented results primarily reflect Baseline BA, while first comparisons with Baseline BC and a prototype version of Baseline CA indicate improvements in future processing baselines, including a reduction of low-cloud artefacts in A-CTH, improved cloud phase representation in A-TC, and a strong reduction of misclassified ice clouds in aerosol layers at temperatures >0 °C. Altogether, the validated ATLID Level 2 products demonstrate a high ability to realistically represent key macrophysical cloud properties—including cloud cover and cloud top height—which confirms their suitability for scientific applications. The identified limitations in the performance of the BA and BC baselines can help users make optimal use of these datasets, point to expected improvements in the upcoming CA baseline, and may support the further refinement of the ATLID Level 2 products.


  • Open Access

    Persistent EarthCARE underflight studies of the ITCZ and organized convection (PERCUSION): contribution to EarthCARE validation

    by Silke Groß, Florian Ewald, Bjorn Stevens, Martin Wirth, Georgios Dekoutsidis, André Ehrlich, Dimitra Kouklaki, Konstantin Krüger, Sophie Rosenburg, Lea Volkmer, et al.

    In May 2024, the Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) satellite was launched. For the first time a satellite payload combines two active instruments, i.e., the Atmospheric Lidar and the Cloud Profiling Radar, together with two passive instruments, a multi-spectral imager and a broad-band radiometer, on one single spacecraft platform. EarthCARE is thus the most complex satellite mission to date for collocated aerosol, cloud, radiation and precipitation measurements. To utilize the data collected by the EarthCARE mission to its full extent and to support and quantify the data quality and measurement uncertainty, careful and holistic validation activities are needed. For this purpose, we set up an airborne instrument payload on the German High Altitude and LOng-range research aircraft (HALO), which is similar to the EarthCARE instrumentation. We used this payload during an extensive measurement campaign in summer and fall 2024 in the tropic and mid- to high-latitudes to validate the EarthCARE measurements and data products early in its commissioning phase. Here we aim to give a detailed overview of the PERCUSION (Persistent Earth CARE underflight studies of the ITCZ and organized convection) mission, and to advertise the use of its data in future more detailed validation studies. We give examples of how to use PERCUSION data to approach the validation of all four instruments of EarthCARE as well as of higher level (i.e. multi-sensor) products, and give first confidence in the quality of EarthCARE data.


  • Open Access

    Comment on egusphere-2026-112

    by Silke Groß, Florian Ewald, Bjorn Stevens, Martin Wirth, Georgios Dekoutsidis, André Ehrlich, Dimitra Kouklaki, Konstantin Krüger, Sophie Rosenburg, Lea Volkmer, et al.

    In May 2024, the Earth Clouds, Aerosols and Radiation Explorer (EarthCARE) satellite was launched. For the first time a satellite combines two active instruments, i.e., the Atmospheric Lidar and the Cloud Profiling Radar, together with two passive instruments, a multi-spectral imager and a broad-band radiometer, on one single spacecraft platform. EarthCARE is thus the most complex satellite mission to date to for collocated aerosol, cloud, radiation and precipitation measurements. To utilize the data collected by the EarthCARE mission to its full extent and to support and quantify the data quality and measurement uncertainty, careful and holistic validation activities are needed. For this purpose, we set up an airborne instrument payload on the German High Altitude and LOng-range research aircraft (HALO), which is similar to the EarthCARE instrumentation. We used this payload during an extensive measurement campaign in summer and fall 2024 in the tropic, sup-tropic and mid- to high-latitudes targeting to validate the EarthCARE measurements and data products early in its commissioning phase. With 33 passes under the EarthCARE satellite during 30 research flights we were able to address target scenes that have been identified by the EarthCARE algorithm developers to be of importance for the validation of the mission, and to assure the retrieval performance under different meteorological conditions and aerosol-cloud situations.

  • Open Access

    Comment on egusphere-2026-112

    by Silke Groß, Florian Ewald, Bjorn Stevens, Martin Wirth, Georgios Dekoutsidis, André Ehrlich, Dimitra Kouklaki, Konstantin Krüger, Sophie Rosenburg, Lea Volkmer, et al.

    In May 2024, the Earth Clouds, Aerosols and Radiation Explorer (EarthCARE) satellite was launched. For the first time a satellite combines two active instruments, i.e., the Atmospheric Lidar and the Cloud Profiling Radar, together with two passive instruments, a multi-spectral imager and a broad-band radiometer, on one single spacecraft platform. EarthCARE is thus the most complex satellite mission to date to for collocated aerosol, cloud, radiation and precipitation measurements. To utilize the data collected by the EarthCARE mission to its full extent and to support and quantify the data quality and measurement uncertainty, careful and holistic validation activities are needed. For this purpose, we set up an airborne instrument payload on the German High Altitude and LOng-range research aircraft (HALO), which is similar to the EarthCARE instrumentation. We used this payload during an extensive measurement campaign in summer and fall 2024 in the tropic, sup-tropic and mid- to high-latitudes targeting to validate the EarthCARE measurements and data products early in its commissioning phase. With 33 passes under the EarthCARE satellite during 30 research flights we were able to address target scenes that have been identified by the EarthCARE algorithm developers to be of importance for the validation of the mission, and to assure the retrieval performance under different meteorological conditions and aerosol-cloud situations.

  • Open Access

    Persistent EarthCARE underflight studies of the ITCZ and organized convection (PERCUSION): Contribution to EarthCARE Validation

    by Silke Groß, Florian Ewald, Bjorn Stevens, Martin Wirth, Georgios Dekoutsidis, André Ehrlich, Dimitra Kouklaki, Konstantin Krüger, Sophie Rosenburg, Lea Volkmer, et al.

    In May 2024, the Earth Clouds, Aerosols and Radiation Explorer (EarthCARE) satellite was launched. For the first time a satellite combines two active instruments, i.e., the Atmospheric Lidar and the Cloud Profiling Radar, together with two passive instruments, a multi-spectral imager and a broad-band radiometer, on one single spacecraft platform. EarthCARE is thus the most complex satellite mission to date to for collocated aerosol, cloud, radiation and precipitation measurements. To utilize the data collected by the EarthCARE mission to its full extent and to support and quantify the data quality and measurement uncertainty, careful and holistic validation activities are needed. For this purpose, we set up an airborne instrument payload on the German High Altitude and LOng-range research aircraft (HALO), which is similar to the EarthCARE instrumentation. We used this payload during an extensive measurement campaign in summer and fall 2024 in the tropic, sup-tropic and mid- to high-latitudes targeting to validate the EarthCARE measurements and data products early in its commissioning phase. With 33 passes under the EarthCARE satellite during 30 research flights we were able to address target scenes that have been identified by the EarthCARE algorithm developers to be of importance for the validation of the mission, and to assure the retrieval performance under different meteorological conditions and aerosol-cloud situations.


  • Open Access

    HALO airborne measurements; PERCUSION’s contribution to EarthCARE validation

    by Silke Gross, Florian Ewald, Martin Wirth, André Ehrlich, Lutz Hirsch, Konstantin Krüger, Anna Luebke, Bernhard Mayer, Sophie Rosenburg, Lea Volkmer, et al.

    In May 2024 the EarthCARE satellite mission EarthCARE was launched. For the first time, the satellite combines a high spectral resolution lidar and a cloud radar with doppler capability as key instruments on one single platform. In addition, it is equipped with a multi spectral imager and a broadband radiometer. This unique combination makes EarthCARE the most complex satellite mission to study aerosol, clouds, precipitation, and radiation. To fully use these new and advanced data for science applications, a careful validation of the measurements and data products is required. We have implemented an EarthCARE-like payload onboard the German research aircraft HALO (High Altitude and LOng range) to prepare and validate the EarthCARE data. This instrumentation was flown during PERCUSION (Persistent EarthCARE underflight studies of the ITCZ and organized convection) as a contribution to ORCESTRA (Organized Convection and EarthCARE Studies over the Tropical Atlantic).ORCESTRA is a network of different campaigns conducted to better understand the organized tropical convection at the mesoscale, e.g. including the interaction of convective organization with tropical waves and air-sea interaction, and the impact of convective organization on the Earth’s climate and radiation budget. In addition, ORCESTRA helps to validate satellite remote sensing (especially EarthCARE). To achieve these objectives, ORCESTRA combines several sub-campaigns taking place on the Cape Verde Islands and Barbados in August and September 2024.One of the campaigns within ORCESTRA is the PERCUSION campaign. PERCUSION aims to test factors hypothesized to influence the organization of deep maritime convection in the tropics and the influence of convective organization on its larger-scale environment. One focus of PERCUSION was to establish confidence in the EarthCARE measurements and products. For this purpose, we conducted one EarthCARE underpass within each research flight HALO measurements were performed during the EarthCARE commissioning phase in August 2024 out of Sal, Cape Verde, and out of Barbados in September 2024. In addition, we performed flights out of Oberpfaffenhofen, Germany in November 2024 for validation of conditions that could not be captured in the two first campaign parts. Altogether, 33 EarthCARE underpasses were carried out in different aerosol and cloud situations. Some of the flights were coordinated with in-situ measurements onboard other aircrafts (e.g. the French ATR42), with shipborne measurements onboard the German research vessel METEOR, or with ground-based radar and lidar measurements at Mindelo (Cape Verde), Barbados, and the ACTRIS stations Antikythera, Leipzig, Lindenberg and Munich. Four underpasses under NASA’s PACE mission were also performed.In our presentation we will give an overview of ORCESTRA with the main focus on PERCUSION. We will present the HALO PERCUSION measurements and will show first comparisons of HALO lidar and radar and EarthCARE lidar and radar measurements.