Natakorn Thasnas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Natakorn Thasnas has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Apirat Siritaratiwat
Department of IoT and Information Engineering, School of Engineering, King Mongkut’s Institute of Technology Ladkrabang, Bangkok 10520, Thailand
2 shared publications - Warat Sriwannarat
Department of Electrical and Computer Engineering, Faculty of Science and Engineering, Kasetsart University Chalermphakiet Sakon Nakhon Campus, Sakon Nakhon 47000, Thailand
2 shared publications - Authumporn Butkaew
Department of Electrical and Computer Engineering, Faculty of Science and Engineering, Kasetsart University Chalermphakiet Sakon Nakhon Campus, Sakon Nakhon 47000, Thailand
1 shared publication - Ekkachai Kanchanatip
Department of Civil and Environmental Engineering, Faculty of Science and Engineering, Kasetsart University, Chalermphrakiat Sakon Nakhon Province Campus, Sakon Nakhon 47000, Thailand
1 shared publication - Kitirote Wantala
Department of Chemical Engineering, Faculty of Engineering, Khon Kaen University, Khon Kaen, Thailand
1 shared publication - Laksanawadee Saikhao
Department of General Science, Faculty of Science and Engineering, Kasetsart University Chalermphakiet Sakon Nakhon Campus, Sakon Nakhon 47000, Thailand
1 shared publication
Latest Publications
- Open Access
- 20 January 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (3) , 1414
Structural Multi-Tooth Modification of Hybrid-Excited Doubly Salient Dual-PM Machine for Torque Production Improvement
A hybrid-excited doubly salient dual-PM machine (HE-DSDPM) was presented by using the structural multi-tooth modification for an improvement of torque production. The multi-tooth structure modification of HE-DSDPM was clearly described. The PM and stator arcs were further examined for structural optimization. The electromagnetic performance including magnetic flux distribution, flux linkage, back-electromotive force (back-EMF), total harmonic distortion (THD), cogging torque and electromagnetic torque, was investigated with various field current under the same structural constraint. The simulation based on 2-D finite element analysis was used to validate all electromagnetic performance. The results showed that the proposed multi-tooth HE-DSDPM provides the best stator/rotor combination, the appropriate PM characteristics and the enlarged winding slot area. This proposed structure produces better overall electromagnetic performance because of its improved symmetrical magnetic flux path and greater flux regulation quality. In particular, it can generate a larger average torque of 26.18% with the lower ripple torque of about 4% compared to the conventional structure at no field current since the good back-EMF profile and low cogging torque. The largest variance of the torque percentage is occurred when excited by different field currents for the proposed multi-tooth HE-DSDPM. Hence, modification of multi-tooth structure could be beneficial in the electrical machine design of other types of doubly salient structures.
- 20 January 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (3) , 1414
Open AccessStructural Multi-Tooth Modification of Hybrid-Excited Doubly Salient Dual-PM Machine for Torque Production Improvement
A hybrid-excited doubly salient dual-PM machine (HE-DSDPM) was presented by using the structural multi-tooth modification for an improvement of torque production. The multi-tooth structure modification of HE-DSDPM was clearly described. The PM and stator arcs were further examined for structural optimization. The electromagnetic performance including magnetic flux distribution, flux linkage, back-electromotive force (back-EMF), total harmonic distortion (THD), cogging torque and electromagnetic torque, was investigated with various field current under the same structural constraint. The simulation based on 2-D finite element analysis was used to validate all electromagnetic performance. The results showed that the proposed multi-tooth HE-DSDPM provides the best stator/rotor combination, the appropriate PM characteristics and the enlarged winding slot area. This proposed structure produces better overall electromagnetic performance because of its improved symmetrical magnetic flux path and greater flux regulation quality. In particular, it can generate a larger average torque of 26.18% with the lower ripple torque of about 4% compared to the conventional structure at no field current since the good back-EMF profile and low cogging torque. The largest variance of the torque percentage is occurred when excited by different field currents for the proposed multi-tooth HE-DSDPM. Hence, modification of multi-tooth structure could be beneficial in the electrical machine design of other types of doubly salient structures.
- 12 November 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (39) , 90318-90327
Valorization of cannabis waste via hydrothermal carbonization: solid fuel production and characterization
Hydrothermal carbonization (HTC) was employed to convert cannabis waste into valuable solid fuel (hydrochar) under different operating conditions, including reaction temperature (170–230 °C), biomass-water ratio (1:10–1:20), and residence time of 60 min. The produced hydrochar was examined for their fuel properties including calorific value (HHV), proximate and ultimate analysis, thermal stability and combustion behavior, etc. The results revealed higher HTC temperature led to a higher degree of carbonization, which is beneficial for increasing carbon content and HHV of the hydrochar. The HHV of the hydrochar improved significantly up to 24.65 MJ/kg after the HTC compared to 17.50 MJ/kg for cannabis waste. The energy yield of hydrochar from the HTC process was in a range of 70.41–82.23%. The optimal HTC condition was observed at 230 °C and a biomass-water ratio of 1:10, producing high-quality hydrochar with 24.24 MJ/kg HHV and 72.28% energy yield. The hydrochar had similar fuel characteristics to lignite coal with significantly lower ash content. Additionally, recirculation of liquid effluent showed a positive influence on the HHV of hydrochar besides minimizing the release of wastewater from the HTC process. The study revealed that HTC is a promising technique for valorization of cannabis waste into high-value solid fuel, which can be potentially an alternative to coal. Graphical Abstract
- 12 November 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (39) , 90318-90327
Valorization of cannabis waste via hydrothermal carbonization: solid fuel production and characterization
Hydrothermal carbonization (HTC) was employed to convert cannabis waste into valuable solid fuel (hydrochar) under different operating conditions, including reaction temperature (170–230 °C), biomass-water ratio (1:10–1:20), and residence time of 60 min. The produced hydrochar was examined for their fuel properties including calorific value (HHV), proximate and ultimate analysis, thermal stability and combustion behavior, etc. The results revealed higher HTC temperature led to a higher degree of carbonization, which is beneficial for increasing carbon content and HHV of the hydrochar. The HHV of the hydrochar improved significantly up to 24.65 MJ/kg after the HTC compared to 17.50 MJ/kg for cannabis waste. The energy yield of hydrochar from the HTC process was in a range of 70.41–82.23%. The optimal HTC condition was observed at 230 °C and a biomass-water ratio of 1:10, producing high-quality hydrochar with 24.24 MJ/kg HHV and 72.28% energy yield. The hydrochar had similar fuel characteristics to lignite coal with significantly lower ash content. Additionally, recirculation of liquid effluent showed a positive influence on the HHV of hydrochar besides minimizing the release of wastewater from the HTC process. The study revealed that HTC is a promising technique for valorization of cannabis waste into high-value solid fuel, which can be potentially an alternative to coal. Graphical Abstract
- Open Access
- 12 November 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (22) , 11507
Study of Electrochemical Properties of Compared Indigo for Metal–Semiconductor–Metal Diode
Indigo blue was discovered as a semiconductor material because of its organic semiconductor properties. This paper shows a primary study of the electrochemical properties of Sakon Nakhon-indigo strain used in the metal–semiconductor–metal (MSM) diode. The fermentation and extraction of our local indigo plant are explained. Indian indigo in the MSM diode is compared in the same conditions of preparation. The electrochemical properties, including the current–voltage (I–V) characteristic, static resistance, and rectification ratio, are discussed. The results show that the electron and hole characteristics and band gap energy of the indigo blue affects the electrochemical properties of the device. Our local MSM diode has a suitable operation between −1 and +3 VMSM with a knee voltage of 1.0 VMSM. Especially, it can produce the highest forward-bias current of about 3.19 mA at linear operation between +2 and +3 VMSM, whereas the review MSM diode is about 2–3 hundred times lower. This shows that this strain has more conductive properties because of its effective electron and hole characteristics obtained by an indigo yield concentration. Therefore, the MSM diode based on Sakon Nakhon-indigo strain is an important role in an electronic semiconductor device for low voltage consumption and high sensitivity. In the future, the molecular characteristics of local indigo may be deeply analyzed to be further developed into a thin-film form used as an organic semiconductor material in several electronic devices.
- 12 November 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (22) , 11507
Open AccessStudy of Electrochemical Properties of Compared Indigo for Metal–Semiconductor–Metal Diode
Indigo blue was discovered as a semiconductor material because of its organic semiconductor properties. This paper shows a primary study of the electrochemical properties of Sakon Nakhon-indigo strain used in the metal–semiconductor–metal (MSM) diode. The fermentation and extraction of our local indigo plant are explained. Indian indigo in the MSM diode is compared in the same conditions of preparation. The electrochemical properties, including the current–voltage (I–V) characteristic, static resistance, and rectification ratio, are discussed. The results show that the electron and hole characteristics and band gap energy of the indigo blue affects the electrochemical properties of the device. Our local MSM diode has a suitable operation between −1 and +3 VMSM with a knee voltage of 1.0 VMSM. Especially, it can produce the highest forward-bias current of about 3.19 mA at linear operation between +2 and +3 VMSM, whereas the review MSM diode is about 2–3 hundred times lower. This shows that this strain has more conductive properties because of its effective electron and hole characteristics obtained by an indigo yield concentration. Therefore, the MSM diode based on Sakon Nakhon-indigo strain is an important role in an electronic semiconductor device for low voltage consumption and high sensitivity. In the future, the molecular characteristics of local indigo may be deeply analyzed to be further developed into a thin-film form used as an organic semiconductor material in several electronic devices.