Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kexin Lei has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Species-specific tree structural parameters extraction via UAV RGB-LiDAR data and multimodal instance segmentation

    by Jiansen Wang, Huaiqing Zhang, Hanqing Qiu, Kexin Lei, Hongyan Yu, Xianyin Wang


  • Open Access

    A Novel Strategy for Constructing Large-Scale Forest Scene: Integrating Forest Hierarchical Models and Tree Growth Models to Improve the Efficiency and Stability of Forest Polymorphism Simulation

    by Kexin Lei, Huaiqing Zhang, Hanqing Qiu, Tingdong Yang, Yang Liu, Jing Zhang, Xingtao Hu, Zeyu Cui

    Modeling large-scale scenarios of diversity in real forests is a hot topic in forestry research. At present, there is a common problem of simple and poor model scalability in large-scale forest scenes. Forest growth is often carried out using a holistic scaling approach, which does not reflect the diversity of trees in nature. To solve this problem, we propose a method for constructing large-scale forest scenes based on forest hierarchical models, which can improve the dynamic visual effect of large-scale forest landscape polymorphism. In this study, we constructed tree hierarchical models of corresponding sizes using the detail attribute data of 29 subplots in the Shanxia Experimental Forest Farm in Jiangxi Province. The growth values of trees of different ages were calculated according to the hierarchical growth model of trees, and the growth dynamic simulation of large-scale forest scenes constructed by the integrated model and hierarchical model was carried out using three-dimensional visualization technology. The results indicated that the runtime frame rate of the scene constructed by the hierarchical model was 30.63 fps and the frame rate after growth was 29.68 fps, which met the operational requirements. Compared with the traditional integrated model, the fluctuation value of the frame rate of the hierarchical model was 0.036 less than that of the integrated model, and the scene ran stably. The positive feedback rate of personnel evaluation reached 95%. In this study, the main conclusion is that our proposed method achieves polymorphism in large-scale forest scene construction and ensures the stability of large-scale scene operation.


  • Open Access

    Constructing Coupling Model of Generalized B-Spline Curve and Crown (CMGBCC) to Explore the 3D Modeling of Chinese Fir Polymorphism

    by Zeyu Cui, Huaiqing Zhang, Yang Liu, Jing Zhang, Tingdong Yang, Yuanqing Zuo, Kexin Lei

    Crown simulation based on basis spline (b-spline) interpolation is a compatible method to simulate tree polymorphism at present. However, there are two problems when it simulates the crown: the first problem is that the derivative value at the top point needs to be given manually, and the second is that the type of value point needs to be collected equidistantly. To solve the above problems and realize convenient and accurate tree polymorphism simulation, this study took Chinese fir as the study object, set the crown morphological feature as the model value point, and constructed a coupling model of generalized B-spline curve and crown (CMGBCC) as the constraint condition of the crown shape to simulate the polymorphism in the process of a tree three-dimensional (3D) model. The position and size of the distribution on the 3D model of the branches were constrained by the curve, and the 3D modeling of a Chinese fir polymorphism was constructed. According to the collection of Chinese fir-type value points in the sample plot, the study realized the detailed types of value points’ precise simulation for three polymorphisms of the Chinese fir crown, including natural pruning, crown displacement, and crown shape difference. At the same time, the different withered existence states of the branches were considered preliminarily. Compared to the 3D model with the field survey data, indicating that constructed models could simulate the difference in tree crown morphology precisely, the branch models were separated by convenience to simulate the process of Chinese fir growth. In the process of construction, CMGBCC did not need to add the derivative value in a manual way and could collect the type of value points according to the characteristics of the crown morphological changes completely. Compared to the results of the crown curve constructed, which were based on generalized B-spline (GB-spline) interpolation and b-spline interpolation, it showed that the number of crown value points collected by the GB-spline interpolation method decreased by 18% on average. The precision of the crown shape constraint was improved by 7.63% compared to b-spline interpolation. The 3D modeling of tree polymorphism was combined with the relationship between tree morphology and environment. At the same time, it was convenient to simulate the behavior of forest management measures, such as pruning.


  • Open Access

    Visual Simulation Research on Growth Polymorphism of Chinese Fir Stand Based on Different Comprehensive Grade Models of Spatial Structure Parameters

    by Xingtao Hu, Huaiqing Zhang, Guangbin Yang, Hanqing Qiu, Kexin Lei, Tingdong Yang, Yang Liu, Yuanqing Zuo, Jiansen Wang, Zeyu Cui

    Since tree morphological structure is strongly influenced by internal genetic and external environmental factors, accurate simulation of individual morphological–structural changes in trees is the premise of forest management and 3D simulation. However, existing studies have few descriptions, and the research on the impact of growth environments and stand spatial structures on tree morphological structure and growth is still limited. In our study, we constructed a comprehensive grade model of spatial structure (CGMSS) to comprehensively evaluate individual tree growth states of the stands and grade them from 0 to 10 correspondingly. In addition, we developed a Chinese fir morphological structure growth model based on CGMSS, and dynamically simulate the growth variations of Chinese fir stands. The results showed that the overall stand prediction accuracy of CGMSS-based Chinese fir diameter at breast height, tree height, crown width and under-living branch height growth models was more than 94%. According to the analysis of the comprehensive grade of spatial structure (CGSS) of trees in the stand, except for the prediction accuracy and systematic error of the under-living branch height growth model at the CGSS = 3–5 levels, the systematic error of the Chinese fir growth model at each level was lower than 21.2%, and the prediction accuracy was greater than 73%. Compared with the spatial structural unit (SSU)-based Chinese fir growth model proposed by Ma et al., all growth models fit better at all levels, except for the CGMSS-based Chinese fir tree height and under-living branch height growth models that fit significantly lower than the SSU-based Chinese fir growth model at CGSS = 3–5 levels. In this study, the main conclusion is that the simulation results of CGMSS’s Chinese fir morphological structure growth model are closer to the real growth state of trees, achieving accurate simulation of differential growth of trees in different growth dominance degrees and spatial structure states in forest stands, making visualized forest management more effective and realistic.


  • Open Access

    New Coupled Canopy–Light Model (CCLM) to Improve Visual Polymorphism Simulation of Fir Morphology

    by Yuanqing Zuo, Huaiqing Zhang, Zeyu Cui, Yang Liu, Kexin Lei, Xingtao Hu, Hanqing Qiu, Jiansen Wang, Jing Zhang, Tingdong Yang

    Environmental factors substantially influence the growth of trees. The current studies on tree growth simulation have mainly focused on the effect of environmental factors on diameter at breast height and tree height. However, the influence of environmental factors, especially light, on canopy morphology has not been considered, hindering the accurate understanding of the range of characteristics of tree morphology that occur due to environmental changes. To solve this problem, this study investigated the influence of light on the changes in canopy morphology and constructed a coupled canopy–light model (CCLM) to visually simulate the polymorphism of fir morphology. Using the Huangfengqiao Forestry Farm in You County, Hunan Province, China, as the study area, we selected a typical sample plot. Field surveys of the fir trees in the sample plot were conducted for three consecutive years to obtain longitudinal data of fir tree canopy shape. We constructed the canopy curves using a cubic uniform B-spline to construct 3D models of the fir trees in different years. The topographic and spatial location distribution data of the fir trees were used to construct a 3D scene of the sample plot in the UE4 3D engine, and the light distribution for each part of the canopy was calculated in a 3D scene by using the annual average photosynthetically active radiation (PAR) as the light parameter, which we combined with the ray-tracing algorithm. This study constructed the CCLM from the fir diameter using the breast-height growth model (BDGM) and the height–diameter curve model (HDCM), the fir trees’ canopy shape description from two years, and the light distribution data. We compared the canopy data obtained from canopy simulations using the CCLM with those obtained using a growth model based on spatial structure (GMBOSS) and those obtained from field surveys to identify any difference in the effectiveness of the canopy simulations using the CCLM and GMBOSS. Based on the BDGM and HDCM, we constructed the CCLM of firs with a determination coefficient (R2) of 0.829, combining data on canopy shape descriptions obtained from two years of field surveys and the light distribution data of each part of the canopy obtained through the ray-tracing algorithm. The Euclidean distance between the canopy description data obtained using the CCLM and the canopy description data obtained from the field survey was 15.561; that between the GMBOSS and the field survey was 23.944. A virtual forest stand environment was constructed from the survey data, combining ray-tracing algorithms to construct the CCLM model of fir in a virtual forest stand environment for growth visualization and simulation. Compared with the canopy description data obtained using the GMBOSS, the canopy description data obtained using the CCLM better fit the canopy description data obtained from the field survey, and the Euclidean distance decreased from 23.944 to 15.561.


  • Open Access

    A New Tree-Level Multi-Objective Forest Harvest Model (MO-PSO): Integrating Neighborhood Indices and PSO Algorithm to Improve the Optimization Effect of Spatial Structure

    by Hanqing Qiu, Huaiqing Zhang, Kexin Lei, Xingtao Hu, Tingdong Yang, Xian Jiang

    Accurate, efficient, impersonal harvesting models play a very important role in optimizing stand spatial structural and guiding forest harvest practices. However, existing studies mainly focus on the single-objective optimization and evaluation of forest at the stand- or landscape-level, lacking considerations of tree-level neighborhood interactions. Therefore, the study explored the combination of the PSO algorithm and neighborhood indices to construct a tree-level multi-objective forest harvest model (MO-PSO) covering multi-dimensional spatial characteristics of stands. Taking five natural secondary forest plots and thirty simulated plots as the study area, the MO-PSO was used to simulate and evaluate the process of thinning operations. The results showed that the MO-PSO model was superior to the basic PSO model (PSO) and random thinning model Monte Carlo-based (RD-TH), DBH dominance (DOMI), uniform angle (ANGL), and species mingling (MING) were better than those before thinning. The multi-dimensional stand spatial structure index (L-index) increased by 1.0%~11.3%, indicating that the forest planning model (MO-PSO) could significantly improve the spatial distribution pattern, increase the tree species mixing, and reduce the degree of stand competition. In addition, under the four thinning intensities of 0% (T1), 15% (T2), 30% (T3), and 45% (T4), L-index increased and T2 was the optimal thinning intensity from the perspective of stand spatial structure overall optimization. The study explored the effect of thinning on forest spatial structure by constructing a multi-objective harvesting model, which can help to make reasonable and scientific forest management decisions under the concept of multi-objective forest management.


  • Open Access

    Comprehensive Decision Index of Logging (CDIL) and Visual Simulation Based on Horizontal and Vertical Structure Parameters

    by Kexin Lei, Huaiqing Zhang, Hanqing Qiu, Yang Liu, Xingtao Hu, Jiansen Wang, Zeyu Cui, Yuanqing Zuo

    The comprehensive indexes approach based on stand structure parameters is mainly used to select trees for harvest. However, these indexes do not consider the comprehensive impact of horizontal and vertical structures, leading to an incomplete analysis of the forest structure and an inaccurate selection of trees for harvest. To solve this problem, we constructed a comprehensive decision index of logging (CDIL), integrating horizontal and vertical structure parameters which can identify harvest trees more scientifically. In this study, we took the Shanxia Forest Farm in the Jiangxi Province of China as the experimental area and used mixed broadleaf/conifer forests at different ages as our experimental sample. We selected eight horizontal and vertical spatial structure parameters to establish an efficient, objective, and accurate comprehensive decision index of logging. We combined 3D visualization technology to realize the dynamic visualization simulation of the index at different intensities of tending and felling management. The results indicated that the proposed CDIL-index could effectively optimize the forest spatial structure. From the perspective of stand structure adjustment, the optimal thinning intensity was 20%. The average CDIL in each plot decreased by more than 80% after logging, while the change range of each plot was between 30% and 70% after the F index was applied to implement tending and logging. The CDIL was 11.4% more accurate in selecting trees for harvesting than the F index. In this study, the main conclusion is that the CDIL would enable forest managers to more accurately choose trees for harvesting, leading to forest adjustment that would reduce the competition pressure among trees and improve the distribution and health of trees, possibly making the forest structure more stable.


  • Open Access

    Very High Resolution Images and Superpixel-Enhanced Deep Neural Forest Promote Urban Tree Canopy Detection

    by Yang Liu, Huaiqing Zhang, Zeyu Cui, Kexin Lei, Yuanqing Zuo, Jiansen Wang, Xingtao Hu, Hanqing Qiu

    Urban tree canopy (UTC) area is an important index for evaluating the urban ecological environment; the very high resolution (VHR) images are essential for improving urban tree canopy survey efficiency. However, the traditional image classification methods often show low robustness when extracting complex objects from VHR images, with insufficient feature learning, object edge blur and noise. Our objective was to develop a repeatable method—superpixel-enhanced deep neural forests (SDNF)—to detect the UTC distribution from VHR images. Eight data expansion methods was used to construct the UTC training sample sets, four sample size gradients were set to test the optimal sample size selection of SDNF method, and the best training times with the shortest model convergence and time-consumption was selected. The accuracy performance of SDNF was tested by three indexes: F1 score (F1), intersection over union (IoU) and overall accuracy (OA). To compare the detection accuracy of SDNF, the random forest (RF) was used to conduct a control experiment with synchronization. Compared with the RF model, SDNF always performed better in OA under the same training sample size. SDNF had more epoch times than RF, converged at the 200 and 160 epoch, respectively. When SDNF and RF are kept in a convergence state, the training accuracy is 95.16% and 83.16%, and the verification accuracy is 94.87% and 87.73%, respectively. The OA of SDNF improved 10.00%, reaching 89.00% compared with the RF model. This study proves the effectiveness of SDNF in UTC detection based on VHR images. It can provide a more accurate solution for UTC detection in urban environmental monitoring, urban forest resource survey, and national forest city assessment.


  • Open Access

    Precise Wetland Mapping in Southeast Asia for the Ramsar Strategic Plan 2016–24

    by Yang Liu, Huaiqing Zhang, Zeyu Cui, Yuanqing Zuo, Kexin Lei, Jing Zhang, Tingdong Yang, Ping Ji

    A precise distribution map of wetlands can provide basic data of wetland conservation and management for Ramsar parties in each region. In this study, based on the Google Earth Engine (GEE) platform and Sentinel-2 images, the integrated inundation dynamic, phenological, and geographical features for a multi-class tropical wetland mapping method (IPG-MTWM) was used to generate the Southeast Asia wetland cover map (SEAWeC) in 2020, which has a 10 m spatial resolution with 11 wetland types. The overall accuracy (OA) of SEAWeC was 82.52%, which, in comparison with other mappings the SEAWeC, performs well. The results of SEAWeC show that (1) in 2020, the total wetland area in Southeast Asia was 123,268.61 km2, (2) for the category I, the coastal wetlands has the largest area, reaching 58,534.78 km2, accounting for 47.49%, (3) for the category II, the coastal swamp has the largest area, reaching 48,002.66 km2, accounting for 38.94% of the total wetland area in Southeast Asia, and (4) significant difference in wetland rate (WR) between countries in Southeast Asia, in which Singapore has a WR of 6.96%, ranking first in Southeast Asia. The SEAWeC can provide the detailed spatial and type distribution data as basic data for the Southeast Asia to support the Ramsar strategic plan 2016–24.