Shubhashish Shubhashish
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shubhashish Shubhashish has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Steven L. Suib
University of Connecticut 55 North Eagleville Road
6 shared publications - Luisa F. Posada
Department of Chemistry, University of Connecticut, Storrs, Connecticut 06269, United States
5 shared publications Ibrahima Ndiaye
GE Global Research Center, Niskayuna, New York 12309, United States
3 shared publicationsJierui Zhou
Department of Electrical and Computer Engineering, University of Connecticut, Storrs, Connecticut 06269, United States
3 shared publicationsKarim Younsi
GE Global Research Center, Niskayuna, New York 12309, United States
3 shared publications- Yang Cao
Electrical Insulation Research Center, Institute of Materials Science, University of Connecticut, Storrs, CT 06269, USA
3 shared publications
Latest Publications
- 3 July 2024
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 58 (30) , 13296-13306
High-Throughput Compatibility Screening of Materials for SF6-Alternative Insulation
With the annual global electricity production exceeding 30,000 TWh, the safe transmission of electric power has been heavily relying on SF6, the most potent industrial greenhouse gas. While promising SF6 alternatives have been proposed, their compatibilities with materials used in gas-insulated equipment (GIE) must be thoroughly studied. This is particularly true as the emerging SF6 alternatives generally leverage their relatively higher reactivity to achieve lower global warming potentials (GWPs). Here, a high-throughput compatibility screening of common GIE materials was conducted with a representative SF6 alternative, namely, C4F7N (2,3,3,3-tetrafluoro-2-(trifluoromethyl)propanenitrile)/CO2 gas mixtures. In this screening, the insulation performance of C4F7N/CO2 gas mixtures, as an indicator of the C4F7N/materials compatibility level, was periodically monitored during the thermal aging with tens of materials from SF6-insulated GIE, including desiccants/adsorbents, rubber, plastics, composites, ceramics, metals, etc. The identification of incompatible materials and the follow-up mechanism studies suggested that the acidity of materials represents the primary cause for C4F7N/materials incompatibility when C4F7N/CO2 gas mixtures are used as a drop-in replacement solution for existing SF6-insulated apparatuses. Mitigation strategies tackling the acidity of materials were then proposed and validated. Additionally, the amphoteric characteristics of C4F7N were briefly discussed. This work provides insight into the materials incompatibility of SF6 alternatives, along with validated mitigation strategies, for the selection and design of materials used in future eco-friendly GIE.
- 3 July 2024
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 58 (30) , 13296-13306
High-Throughput Compatibility Screening of Materials for SF6-Alternative Insulation
With the annual global electricity production exceeding 30,000 TWh, the safe transmission of electric power has been heavily relying on SF6, the most potent industrial greenhouse gas. While promising SF6 alternatives have been proposed, their compatibilities with materials used in gas-insulated equipment (GIE) must be thoroughly studied. This is particularly true as the emerging SF6 alternatives generally leverage their relatively higher reactivity to achieve lower global warming potentials (GWPs). Here, a high-throughput compatibility screening of common GIE materials was conducted with a representative SF6 alternative, namely, C4F7N (2,3,3,3-tetrafluoro-2-(trifluoromethyl)propanenitrile)/CO2 gas mixtures. In this screening, the insulation performance of C4F7N/CO2 gas mixtures, as an indicator of the C4F7N/materials compatibility level, was periodically monitored during the thermal aging with tens of materials from SF6-insulated GIE, including desiccants/adsorbents, rubber, plastics, composites, ceramics, metals, etc. The identification of incompatible materials and the follow-up mechanism studies suggested that the acidity of materials represents the primary cause for C4F7N/materials incompatibility when C4F7N/CO2 gas mixtures are used as a drop-in replacement solution for existing SF6-insulated apparatuses. Mitigation strategies tackling the acidity of materials were then proposed and validated. Additionally, the amphoteric characteristics of C4F7N were briefly discussed. This work provides insight into the materials incompatibility of SF6 alternatives, along with validated mitigation strategies, for the selection and design of materials used in future eco-friendly GIE.
- 1 May 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (19) , 24712-24722
Unveiling Enhanced PEC Water Oxidation: Morphology Tuning and Interfacial Phase Change in α-Fe2O3@K-OMS-2 Branched Core–Shell Nanoarrays
A simple fabrication method that involves two steps of hydrothermal reaction has been demonstrated for the growth of α-Fe2O3@K-OMS-2 branched core-shell nanoarrays. Different reactant concentrations in the shell-forming step led to different morphologies in the resultant composites, denoted as 0.25 OC, 0.5 OC, and 1.0 OC. Both 0.25 OC and 0.5 OC formed perfect branched core-shell structures, with 0.5 OC possessing longer branches, which were observed by SEM and TEM. The core K-OMS-2 and shell α-Fe2O3 were confirmed by grazing incidence X-ray diffraction (GIXRD), EDS mapping, and atomic alignment from high-resolution STEM images. Further investigation with high-resolution HAADF-STEM, EELS, and XPS indicated the existence of an ultrathin layer of Mn3O4 sandwiched at the interface. All composite materials offered greatly enhanced photocurrent density at 1.23 VRHE, compared to the pristine Fe2O3 photoanode (0.33 mA/cm2), and sample 0.5 OC showed the highest photocurrent density of 2.81 mA/cm2. Photoelectrochemical (PEC) performance was evaluated for the samples by conducting linear sweep voltammetry (LSV), applied bias photo-to-current efficiency (ABPE), electrochemical impedance spectroscopy (EIS), incident-photo-to-current efficiency (IPCE), transient photocurrent responses, and stability tests. The charge separation and transfer efficiencies, together with the electrochemically active surface area, were also investigated. The significant enhancement in sample 0.5 OC is ascribed to the synergetic effect brought by the longer branches in the core-shell structure, the conductive K-OMS-2 core, and the formation of the Mn3O4 thin layer formed between the core and shell.
- 1 May 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (19) , 24712-24722
Unveiling Enhanced PEC Water Oxidation: Morphology Tuning and Interfacial Phase Change in α-Fe2O3@K-OMS-2 Branched Core–Shell Nanoarrays
A simple fabrication method that involves two steps of hydrothermal reaction has been demonstrated for the growth of α-Fe2O3@K-OMS-2 branched core-shell nanoarrays. Different reactant concentrations in the shell-forming step led to different morphologies in the resultant composites, denoted as 0.25 OC, 0.5 OC, and 1.0 OC. Both 0.25 OC and 0.5 OC formed perfect branched core-shell structures, with 0.5 OC possessing longer branches, which were observed by SEM and TEM. The core K-OMS-2 and shell α-Fe2O3 were confirmed by grazing incidence X-ray diffraction (GIXRD), EDS mapping, and atomic alignment from high-resolution STEM images. Further investigation with high-resolution HAADF-STEM, EELS, and XPS indicated the existence of an ultrathin layer of Mn3O4 sandwiched at the interface. All composite materials offered greatly enhanced photocurrent density at 1.23 VRHE, compared to the pristine Fe2O3 photoanode (0.33 mA/cm2), and sample 0.5 OC showed the highest photocurrent density of 2.81 mA/cm2. Photoelectrochemical (PEC) performance was evaluated for the samples by conducting linear sweep voltammetry (LSV), applied bias photo-to-current efficiency (ABPE), electrochemical impedance spectroscopy (EIS), incident-photo-to-current efficiency (IPCE), transient photocurrent responses, and stability tests. The charge separation and transfer efficiencies, together with the electrochemically active surface area, were also investigated. The significant enhancement in sample 0.5 OC is ascribed to the synergetic effect brought by the longer branches in the core-shell structure, the conductive K-OMS-2 core, and the formation of the Mn3O4 thin layer formed between the core and shell.
- 10 April 2024
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 12 (17) , 6467-6472
Mitigation of Aging Product Generation in C4F7N-Based SF6 Alternatives: A Holistic Approach
- 10 April 2024
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 12 (17) , 6467-6472
Mitigation of Aging Product Generation in C4F7N-Based SF6 Alternatives: A Holistic Approach
- Open Access
- 9 February 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (6)
Decomposition characteristics of C4F7N-based SF6-alternative gas mixtures
C4F7N [2,3,3,3-tetrafluoro-2-(trifluoromethyl)propanenitrile]/CO2 gas mixtures are being developed as an eco-friendly electrical insulator to replace SF6, the most potent greenhouse industrial gaseous dielectric. However, recent studies have reported complicated and often conflicting decomposition pathways for C4F7N/CO2 gas mixtures, which has raised concerns. In this work, the decomposition characteristics of C4F7N/CO2 gas mixtures were studied comprehensively by both designed computations and experiments. Computations were performed starting from fundamental propositions of C4F7N/CO2 decompositions, which were further experimentally verified by pyrolysis, long-term thermal aging with/without catalytic materials (industrial-grade molecular sieves 4A), and electrical decomposition by spark discharge. The results of both computations and experiments suggest that in an ideal thermal decomposition, C4F7N is likely to decompose into C2F6 and small fluoronitriles first at high temperatures. The generation of C3F6 and C2N2 from C4F7N thermal decomposition at lower temperatures appears because of the catalytic effect of incompatible materials, for example, the industrial-grade molecular sieves 4A that we tested. The electron impact dissociation of C4F7N plays an important role in C4F7N electrical decomposition, leading to additional formation of distinctive small molecules of CF4 and C2N2 of low concentrations. It was pointed out based on a real arcing test in a load disconnector that the decomposition of C4F7N gas mixtures in real applications will be at a much moderate and manageable rate than what was obtained from the highly accelerated laboratory tests presented in this work. The signatures of decomposition products extracted in this study provide invaluable guidance for developing decomposition-based diagnosis and fixation of decomposition byproducts toward SF6-free power grids.
- 9 February 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (6)
Open AccessDecomposition characteristics of C4F7N-based SF6-alternative gas mixtures
C4F7N [2,3,3,3-tetrafluoro-2-(trifluoromethyl)propanenitrile]/CO2 gas mixtures are being developed as an eco-friendly electrical insulator to replace SF6, the most potent greenhouse industrial gaseous dielectric. However, recent studies have reported complicated and often conflicting decomposition pathways for C4F7N/CO2 gas mixtures, which has raised concerns. In this work, the decomposition characteristics of C4F7N/CO2 gas mixtures were studied comprehensively by both designed computations and experiments. Computations were performed starting from fundamental propositions of C4F7N/CO2 decompositions, which were further experimentally verified by pyrolysis, long-term thermal aging with/without catalytic materials (industrial-grade molecular sieves 4A), and electrical decomposition by spark discharge. The results of both computations and experiments suggest that in an ideal thermal decomposition, C4F7N is likely to decompose into C2F6 and small fluoronitriles first at high temperatures. The generation of C3F6 and C2N2 from C4F7N thermal decomposition at lower temperatures appears because of the catalytic effect of incompatible materials, for example, the industrial-grade molecular sieves 4A that we tested. The electron impact dissociation of C4F7N plays an important role in C4F7N electrical decomposition, leading to additional formation of distinctive small molecules of CF4 and C2N2 of low concentrations. It was pointed out based on a real arcing test in a load disconnector that the decomposition of C4F7N gas mixtures in real applications will be at a much moderate and manageable rate than what was obtained from the highly accelerated laboratory tests presented in this work. The signatures of decomposition products extracted in this study provide invaluable guidance for developing decomposition-based diagnosis and fixation of decomposition byproducts toward SF6-free power grids.
- 2 May 2023
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 11 (19) , 7301-7308
Allylic and Benzylic Alcohol Coupling Reactions Catalyzed by Lithium-Promoted Manganese Oxides
- 2 May 2023
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 11 (19) , 7301-7308
Allylic and Benzylic Alcohol Coupling Reactions Catalyzed by Lithium-Promoted Manganese Oxides
- 6 November 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (45) , 51041-51052
Highly Mesoporous MoO3 Catalysts for Electrophilic Aromatic Substitution
Herein, a straightforward synthesis method for highly mesoporous molybdenum oxide has been demonstrated via use of inverse micelles and molybdenum-oxo cluster formation. The synthesized catalyst is stable, crystalline, and MoO3 phase pure, as confirmed through thermogravimetric analysis, X-ray diffraction, and X-ray photoelectron spectroscopy. Further results from electron paramagnetic resonance, Raman spectroscopy, and UV-vis spectroscopy confirm the MoO3 phase purity. Chemisorption studies reveal that the synthesized material is 65 times more active than its commercial parts. The quantitative value of ammonia chemisorption for the synthesized catalyst is 1270 μmol/g, whereas the commercial catalyst only gives 22 μmol/g. These materials were tested for electrophilic substitution reactions since they are excellent solid acid. Electrophilic substitution of benzyl alcohol with toluene gives a >99% conversion with ∼80% of selectivity toward the methyl diphenylmethane product. The turnover number and turnover frequency values were calculated to be as high as 115 and 38, respectively. A substrate scope study shows that the reaction has preference toward electron-donating groups, whereas electron-withdrawing groups block the reaction. Based on the obtained results, a mechanism has been proposed.
- 6 November 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (45) , 51041-51052
Highly Mesoporous MoO3 Catalysts for Electrophilic Aromatic Substitution
Herein, a straightforward synthesis method for highly mesoporous molybdenum oxide has been demonstrated via use of inverse micelles and molybdenum-oxo cluster formation. The synthesized catalyst is stable, crystalline, and MoO3 phase pure, as confirmed through thermogravimetric analysis, X-ray diffraction, and X-ray photoelectron spectroscopy. Further results from electron paramagnetic resonance, Raman spectroscopy, and UV-vis spectroscopy confirm the MoO3 phase purity. Chemisorption studies reveal that the synthesized material is 65 times more active than its commercial parts. The quantitative value of ammonia chemisorption for the synthesized catalyst is 1270 μmol/g, whereas the commercial catalyst only gives 22 μmol/g. These materials were tested for electrophilic substitution reactions since they are excellent solid acid. Electrophilic substitution of benzyl alcohol with toluene gives a >99% conversion with ∼80% of selectivity toward the methyl diphenylmethane product. The turnover number and turnover frequency values were calculated to be as high as 115 and 38, respectively. A substrate scope study shows that the reaction has preference toward electron-donating groups, whereas electron-withdrawing groups block the reaction. Based on the obtained results, a mechanism has been proposed.