Insun Woo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Insun Woo has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Jin Woo Bae
Hyperfunctional Organic Polymer Engineering Laboratory, Future Convergence Engineering, Korea University of Technology and Education, Cheonan, Republic of Korea
16 shared publications - Jae Uk Yoon
Multifunctional Organic Polymer Laboratory Future Convergence Engineering Korea University of Technology and Education 1600, Chungjeol‐ro, Byeongcheon‐myeon Cheonan 31253 Republic of Korea
11 shared publications - Prasad Gajula
Hyperfunctional Organic Polymer Engineering Laboratory, Future Convergence Engineering, Korea University of Technology and Education, Cheonan, Republic of Korea
10 shared publications Jae Uk Yoon
5 shared publications- Dong-Heon Han
Multifunctional Organic Polymer Laboratory Future Convergence Engineering School of Energy, Materials and Chemical Engineering Korea University of Technology and Education 1600, Chungjeol‐ro Cheonan 31253 Republic of Korea
4 shared publications Seung-Ju Oh
4 shared publications
Latest Publications
- Open Access
- 5 September 2026
- Published by Springer Nature in Advanced Composites and Hybrid Materials
One‑step spray‑coated self-stratified PDMS/P(VDF‑TrFE) hybrid fibrous composite-based Triboelectric Nanogenerators
- 5 September 2026
- Published by Springer Nature in Advanced Composites and Hybrid Materials
Open AccessOne‑step spray‑coated self-stratified PDMS/P(VDF‑TrFE) hybrid fibrous composite-based Triboelectric Nanogenerators
ZnSnO 3– Ecoflex/LDH–PU Based Triboelectric Nanogenerator for Motion‐Activated Battery‐Free Smart Street Lighting
The development of efficient and durable energy harvesting systems is essential for next‐generation smart infrastructure. Conventional polymer‐based triboelectric nanogenerators (TENGs) suffer from low dielectric constants and limited polarization, restricting output and lifespan. Here, we present a ZnSnO 3 ‐doped Ecoflex and layered double hydroxide (LDH)‐reinforced polyurethane (PU) nanofiber‐based TENG, forming a synergistic triboelectric interface. ZnSnO 3 enhances dielectric response and surface charge generation, while LDH–PU nanofibers improve charge retention and polarization stability. The optimized EZ1/PL5‐TENG delivers 186 V peak voltage, 5.6 µA peak current, and 8.84 µC/m 2 surface charge density, maintaining stable performance over 20,000 cycles. The device efficiently converts biomechanical motion into electrical energy, as demonstrated in both wearable flexion sensing and a motion‐triggered, battery‐free street lighting system that directly powers LEDs. This scalable, flexible TENG platform offers high output, long‐term durability, and practical applicability, highlighting its potential for sustainable smart city illumination, sensing networks, and self‐powered electronics.
ZnSnO 3– Ecoflex/LDH–PU Based Triboelectric Nanogenerator for Motion‐Activated Battery‐Free Smart Street Lighting
The development of efficient and durable energy harvesting systems is essential for next‐generation smart infrastructure. Conventional polymer‐based triboelectric nanogenerators (TENGs) suffer from low dielectric constants and limited polarization, restricting output and lifespan. Here, we present a ZnSnO 3 ‐doped Ecoflex and layered double hydroxide (LDH)‐reinforced polyurethane (PU) nanofiber‐based TENG, forming a synergistic triboelectric interface. ZnSnO 3 enhances dielectric response and surface charge generation, while LDH–PU nanofibers improve charge retention and polarization stability. The optimized EZ1/PL5‐TENG delivers 186 V peak voltage, 5.6 µA peak current, and 8.84 µC/m 2 surface charge density, maintaining stable performance over 20,000 cycles. The device efficiently converts biomechanical motion into electrical energy, as demonstrated in both wearable flexion sensing and a motion‐triggered, battery‐free street lighting system that directly powers LEDs. This scalable, flexible TENG platform offers high output, long‐term durability, and practical applicability, highlighting its potential for sustainable smart city illumination, sensing networks, and self‐powered electronics.
- Open Access
- 13 May 2025
- Published by Wiley in Advanced Sustainable Systems
- Vol. 9 (8)
Reinforcing the Strategy: Enhanced Efficiency of Electrospun PVDF Hybrid Nanocomposites‐Based Triboelectric Nanogenerators with p‐NiO/n‐ZnO Interfaces for Energy Harvesting
Triboelectric nanogenerators (TENGs) have emerged as promising devices for sustainable energy harvesting. This study presents a strategy to enhance the performance of poly(vinylidene fluoride) (PVDF)‐based TENGs by incorporating bimetallic nanoparticles (NiO and ZnO) synthesized via co‐precipitation. Various ZnO loadings (0.1–0.7 wt%) are introduced into a PVDF/NiO matrix (7 wt% NiO), forming p‐n interfaces that improve charge trapping and energy output. The resulting hybrid nanocomposites (PN7/Z‐0.1, PN7/Z‐0.3, PN7/Z‐0.5, PN7/Z‐0.7) are characterized by SEM, XRD, and FT‐IR, confirming effective nanoparticle integration. Among them, PN7/Z‐0.5 exhibits the highest β‐phase content and superior triboelectric performance. The PN7/Z‐0.5:TPU TENG, with thermoplastic polyurethane (TPU) as the tribo‐positive layer, achieves an open‐circuit voltage (VOC) of 158.4 V, short‐circuit current (ISC) of 4.8 µA, surface charge density of 89 nC, and a surface potential of −475 V, which is substantially outperforming pristine PVDF:TPU TENGs. Additionally, the optimized TENG successfully powered capacitors and green LEDs, demonstrating its potential for practical, sustainable energy applications.
- 13 May 2025
- Published by Wiley in Advanced Sustainable Systems
- Vol. 9 (8)
Open AccessReinforcing the Strategy: Enhanced Efficiency of Electrospun PVDF Hybrid Nanocomposites‐Based Triboelectric Nanogenerators with p‐NiO/n‐ZnO Interfaces for Energy Harvesting
Triboelectric nanogenerators (TENGs) have emerged as promising devices for sustainable energy harvesting. This study presents a strategy to enhance the performance of poly(vinylidene fluoride) (PVDF)‐based TENGs by incorporating bimetallic nanoparticles (NiO and ZnO) synthesized via co‐precipitation. Various ZnO loadings (0.1–0.7 wt%) are introduced into a PVDF/NiO matrix (7 wt% NiO), forming p‐n interfaces that improve charge trapping and energy output. The resulting hybrid nanocomposites (PN7/Z‐0.1, PN7/Z‐0.3, PN7/Z‐0.5, PN7/Z‐0.7) are characterized by SEM, XRD, and FT‐IR, confirming effective nanoparticle integration. Among them, PN7/Z‐0.5 exhibits the highest β‐phase content and superior triboelectric performance. The PN7/Z‐0.5:TPU TENG, with thermoplastic polyurethane (TPU) as the tribo‐positive layer, achieves an open‐circuit voltage (VOC) of 158.4 V, short‐circuit current (ISC) of 4.8 µA, surface charge density of 89 nC, and a surface potential of −475 V, which is substantially outperforming pristine PVDF:TPU TENGs. Additionally, the optimized TENG successfully powered capacitors and green LEDs, demonstrating its potential for practical, sustainable energy applications.
- Open Access
- 25 March 2025
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 8 (2) , 1-19
Unveiling the latent potential: Ni/CoFe2O4-loaded electrospun PVDF hybrid composite-based triboelectric nanogenerator for mechanical energy harvesting applications
- 25 March 2025
- Published by Springer Nature in Advanced Composites and Hybrid Materials
- Vol. 8 (2) , 1-19
Open AccessUnveiling the latent potential: Ni/CoFe2O4-loaded electrospun PVDF hybrid composite-based triboelectric nanogenerator for mechanical energy harvesting applications
- 23 March 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (35)
Harnessing Mechanical Energy for Green Hydrogen: Pioneering High‐Performance Triboelectric Nanogenerators
Integration of triboelectric nanogenerators (TENGs) with water splitting offers a promising approach for generating green hydrogen from mechanical energy. However, the development of efficient TENGs is challenged by significant triboelectric losses. To enhance sustainable energy harvesting, it is crucial to minimize these losses and improve tribo‐polarities. Recent advancements in incorporating conductive fillers have proven effective in improving triboelectric performance. In this study, a new class of bifunctional amino surface‐modified graphene oxide (MGO) fillers synthesized from graphite powder is introduced. The MGO filler enhances the positive polarity of the polymer through amino groups while reducing triboelectric loss due to the inherent conductivity of graphene. Incorporating 1.5 wt.% of MGO into silk electrospun membranes (1.5SMGO) boosted the surface positivity from +695 to +1905 V, surpassing unmodified graphene oxide (GO) (+1220 V), highlighting the impact of surface modification. The resulting TENG with 1.5SMGO exhibits an open circuit voltage of 1135 V and a current density of 11.76 mA m−2, demonstrating its effectiveness as a sustainable energy harvester for low‐power electronics. Additionally, the proposed TENG can serve as an energy source for water‐splitting, enabling green hydrogen production. Thus, the bifunctional MGO‐based TENG holds significant potential for self‐powered wearable electronics and water‐splitting applications.
- 23 March 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (35)
Harnessing Mechanical Energy for Green Hydrogen: Pioneering High‐Performance Triboelectric Nanogenerators
Integration of triboelectric nanogenerators (TENGs) with water splitting offers a promising approach for generating green hydrogen from mechanical energy. However, the development of efficient TENGs is challenged by significant triboelectric losses. To enhance sustainable energy harvesting, it is crucial to minimize these losses and improve tribo‐polarities. Recent advancements in incorporating conductive fillers have proven effective in improving triboelectric performance. In this study, a new class of bifunctional amino surface‐modified graphene oxide (MGO) fillers synthesized from graphite powder is introduced. The MGO filler enhances the positive polarity of the polymer through amino groups while reducing triboelectric loss due to the inherent conductivity of graphene. Incorporating 1.5 wt.% of MGO into silk electrospun membranes (1.5SMGO) boosted the surface positivity from +695 to +1905 V, surpassing unmodified graphene oxide (GO) (+1220 V), highlighting the impact of surface modification. The resulting TENG with 1.5SMGO exhibits an open circuit voltage of 1135 V and a current density of 11.76 mA m−2, demonstrating its effectiveness as a sustainable energy harvester for low‐power electronics. Additionally, the proposed TENG can serve as an energy source for water‐splitting, enabling green hydrogen production. Thus, the bifunctional MGO‐based TENG holds significant potential for self‐powered wearable electronics and water‐splitting applications.