Ekhlas Kadhum Hamza
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Ekhlas Kadhum Hamza has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Ahmad H. Sabry
Medical Instrumentation Engineering Techniques, Shatt Al-Arab University College, Basra, Iraq
3 shared publications - Sameir Aziez
University of Technology - Iraq , Iraq
3 shared publications - Fadia Noori Hummadi Al-Nuaimy
Al-Khwarizmi Collage of Engineering, University of Baghdad, Baghdad, Iraq
2 shared publications - Ahmed Hameed Reja
University of Technology, Baghdad, Iraq
1 shared publication - Ahmed Mudheher Hasan
College of Artificial Intelligence Engineering, University of Technology-Iraq, Baghdad 10066, Iraq
1 shared publication Heba H. Alhayani
Department of Control and Systems Engineering / University of Technology/ Baghdad
1 shared publication
Latest Publications
- Open Access
- 1 February 2023
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 12 (1) , 224-231
MOCAB/HEFT algorithm of multi radio wireless communication improved achievement assessment
Network-wide conveying is vital in remote associations, and the great part of these broadcasts are built on single-channel single-radio (SC-SR) network frameworks. The problem of the current work is divided into two parts. The first part shows that increasing broadcast and redundancy lead to an increase in time consumption. The second problem is solving complexity problems when tasks are scheduled in a heterogeneous manner in a computing system, where the processors in the network may not be identical and take different time periods to carry out the same task. The goals of this work are to reduce the total cost of network-wide broadcasting to minimize the search space and to solve the complexity problem when tasks are scheduled in a heterogeneous way in the computing system. The MOCAB algorithm is used to select the best transmission path over the network in the first stage. Then, the tasks will be scheduled using the heterogeneous earliest finish time (HEFT) algorithm to extract the values of actual finish time (AFT), earliest start time (EST), and earliest finish time (EFT). The performance of the MOCAB algorithm was evaluated with that of the HEFT algorithm in terms of the delivery ratio of packets delivered. The results showed that the MOCAB algorithm outperformed the HEFT.
- 1 February 2023
- Published by Institute of Advanced Engineering and Science in Bulletin of Electrical Engineering and Informatics
- Vol. 12 (1) , 224-231
Open AccessMOCAB/HEFT algorithm of multi radio wireless communication improved achievement assessment
Network-wide conveying is vital in remote associations, and the great part of these broadcasts are built on single-channel single-radio (SC-SR) network frameworks. The problem of the current work is divided into two parts. The first part shows that increasing broadcast and redundancy lead to an increase in time consumption. The second problem is solving complexity problems when tasks are scheduled in a heterogeneous manner in a computing system, where the processors in the network may not be identical and take different time periods to carry out the same task. The goals of this work are to reduce the total cost of network-wide broadcasting to minimize the search space and to solve the complexity problem when tasks are scheduled in a heterogeneous way in the computing system. The MOCAB algorithm is used to select the best transmission path over the network in the first stage. Then, the tasks will be scheduled using the heterogeneous earliest finish time (HEFT) algorithm to extract the values of actual finish time (AFT), earliest start time (EST), and earliest finish time (EFT). The performance of the MOCAB algorithm was evaluated with that of the HEFT algorithm in terms of the delivery ratio of packets delivered. The results showed that the MOCAB algorithm outperformed the HEFT.
- Open Access
- 30 December 2022
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (9 (120)) , 70-79
Classifying wireless signal modulation sorting using convolutional neural network
Deep learning has recently been used for this issue with superior results in automatic modulation classification. Previous studies state that it is challenging to categorize a variety of modulation formats using traditional approaches; however, modulation classification is a crucial component of non-cooperative communication in wireless communication. The deep learning network was applied to solve the issue and get decent outcomes. This work uses a deep learning convolutional neural network (DLCNN) to classify three analog and eight digital modulation techniques by generating channel-impaired and synthetic waveforms as training data. The obtained DLCNN is tested by over-the-air indicators and a Software Define Radio(SDR) platform. The trained DLCNN estimates the modulation kind of each frame by taking 1024 samples of channel-impaired signals. The method includes generating several frames of 4-arry pulse amplitude modulation (PAM4) that are impaired with sampling time drift, Additive white Gaussian noise (AWGN), center frequency, and Rician multipath fading. The DLCNN predicts real inputs when receiving a signal with complex samples of baseband. Before updating the network coefficients and on all iterations, the data store transforms data from files and records it. This network takes about 50 minutes to train using in-memory data and 110 minutes to train using disk data. The evaluation of the trained DLCNN is carried out by obtaining the classification accuracy for the test frames. The obtained outcome demonstrates that the developed network can achieve an accuracy of about 94.3 % in roughly 12 epochs for such types of waveforms, which elapsed about 26 minutes for training. This will increase the efficiency of spectrum usage and detect the modulation type of the wireless communication receivers
- 30 December 2022
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (9 (120)) , 70-79
Open AccessClassifying wireless signal modulation sorting using convolutional neural network
Deep learning has recently been used for this issue with superior results in automatic modulation classification. Previous studies state that it is challenging to categorize a variety of modulation formats using traditional approaches; however, modulation classification is a crucial component of non-cooperative communication in wireless communication. The deep learning network was applied to solve the issue and get decent outcomes. This work uses a deep learning convolutional neural network (DLCNN) to classify three analog and eight digital modulation techniques by generating channel-impaired and synthetic waveforms as training data. The obtained DLCNN is tested by over-the-air indicators and a Software Define Radio(SDR) platform. The trained DLCNN estimates the modulation kind of each frame by taking 1024 samples of channel-impaired signals. The method includes generating several frames of 4-arry pulse amplitude modulation (PAM4) that are impaired with sampling time drift, Additive white Gaussian noise (AWGN), center frequency, and Rician multipath fading. The DLCNN predicts real inputs when receiving a signal with complex samples of baseband. Before updating the network coefficients and on all iterations, the data store transforms data from files and records it. This network takes about 50 minutes to train using in-memory data and 110 minutes to train using disk data. The evaluation of the trained DLCNN is carried out by obtaining the classification accuracy for the test frames. The obtained outcome demonstrates that the developed network can achieve an accuracy of about 94.3 % in roughly 12 epochs for such types of waveforms, which elapsed about 26 minutes for training. This will increase the efficiency of spectrum usage and detect the modulation type of the wireless communication receivers
- Open Access
- 27 October 2022
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (9(119)) , 54-60
Implementation of radar cross-sections model for targets with different scattering centers
Target scattering or reflection is used by radar systems to identify and detect targets. The larger the echo that was returned to the radar receiver, the superior the signal-to-noise ratio and the greater the likelihood of detection. The radar cross-section (RCS) determines the quantity of energy reflected from a target in radar systems. This work shows new modeling for radar targets with growing stages of fidelity. We introduce the RCS concept for straightforward point targets and extend this into additional complex states of targets with several scattering midpoints. In addition, we discuss the modeling of fluctuations in RCS with time and briefly consider the case of the polarized signal. Because the receiver and transmitter are co-located, the effort focuses on narrowband mono-static radar techniques. The RCS value changes between scans. We simulate the replicated power of a sent signal over 10,000 scanning over unit incident signals, assuming that the signal illuminates the target just once each dwell. The target is modeled by four scatterers that are placed at four square vertices. All scatterers are cylindrical-point targets on a 0.5-meter square XY plane without losing generality. The acquired results demonstrated how to generate target echoes while accounting for statistical fluctuations. From the relation between RCS and elevation angle variations for cylindrical targets, the obtained result demonstrated that the first two outputs are the same and confirmed that there is no reliance on azimuth angle. The comparison between wideband and narrowband RCS patterns demonstrated that the RCS profiles of the target-matched shallower nulls for azimuth direction are in the range of (40–50) degrees at zero elevation for 4 scatterers’ extended targets.
- 27 October 2022
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (9(119)) , 54-60
Open AccessImplementation of radar cross-sections model for targets with different scattering centers
Target scattering or reflection is used by radar systems to identify and detect targets. The larger the echo that was returned to the radar receiver, the superior the signal-to-noise ratio and the greater the likelihood of detection. The radar cross-section (RCS) determines the quantity of energy reflected from a target in radar systems. This work shows new modeling for radar targets with growing stages of fidelity. We introduce the RCS concept for straightforward point targets and extend this into additional complex states of targets with several scattering midpoints. In addition, we discuss the modeling of fluctuations in RCS with time and briefly consider the case of the polarized signal. Because the receiver and transmitter are co-located, the effort focuses on narrowband mono-static radar techniques. The RCS value changes between scans. We simulate the replicated power of a sent signal over 10,000 scanning over unit incident signals, assuming that the signal illuminates the target just once each dwell. The target is modeled by four scatterers that are placed at four square vertices. All scatterers are cylindrical-point targets on a 0.5-meter square XY plane without losing generality. The acquired results demonstrated how to generate target echoes while accounting for statistical fluctuations. From the relation between RCS and elevation angle variations for cylindrical targets, the obtained result demonstrated that the first two outputs are the same and confirmed that there is no reliance on azimuth angle. The comparison between wideband and narrowband RCS patterns demonstrated that the RCS profiles of the target-matched shallower nulls for azimuth direction are in the range of (40–50) degrees at zero elevation for 4 scatterers’ extended targets.
- Open Access
- 27 October 2022
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (9(119)) , 61-67
Identifying some regularities of radio frequency propagation of a radar system by analyzing different environmental effects
Free space path loss is a function of frequency and propagation distance and the RF signal propagates at light speed in all directions in free space. The performance evaluation of wireless and radar communication technologies is related to understanding the propagation environments. This work presents the modeling of several RF propagation properties that include atmospheric attenuation due to rain, free space path loss, gas, and fog, as well as multipath propagations caused by ground bounces. The methodology discusses the developed model according to the series of (ITU) International Telecommunication Union references to radio wave propagation. This work discusses the Free Space Path Losses (FSPL), and Propagation Losses (PL) due to the atmosphere, precipitation, snow, rain, clouds, fog, atmospheric lensing and absorption, and polarization mismatch. The work also discusses the vertical coverage diagram and radar propagation factor. The obtained results demonstrate that the PL increases with frequency and range, at a 90-degree roll angle, the attenuation approaches infinity, and as the altitude rises, the amount of attenuation caused by lensing decreases. The analysis of attenuation at 1 km vs. frequency variations, at roughly 60 GHz, indicated a high absorption owing to air gas. Lensing attenuations are also offered as secondary outputs for convenience, the wideband channels present higher performance crossways and a wide range of target height as expected. When the target height increases, the influence of multi-path fading approximately vanishes entirely due to the variation increasing in the spreading delay between the bounce and direct pathway signals. This will reduce the coherence sum between these two samples on receiving by the target
- 27 October 2022
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (9(119)) , 61-67
Open AccessIdentifying some regularities of radio frequency propagation of a radar system by analyzing different environmental effects
Free space path loss is a function of frequency and propagation distance and the RF signal propagates at light speed in all directions in free space. The performance evaluation of wireless and radar communication technologies is related to understanding the propagation environments. This work presents the modeling of several RF propagation properties that include atmospheric attenuation due to rain, free space path loss, gas, and fog, as well as multipath propagations caused by ground bounces. The methodology discusses the developed model according to the series of (ITU) International Telecommunication Union references to radio wave propagation. This work discusses the Free Space Path Losses (FSPL), and Propagation Losses (PL) due to the atmosphere, precipitation, snow, rain, clouds, fog, atmospheric lensing and absorption, and polarization mismatch. The work also discusses the vertical coverage diagram and radar propagation factor. The obtained results demonstrate that the PL increases with frequency and range, at a 90-degree roll angle, the attenuation approaches infinity, and as the altitude rises, the amount of attenuation caused by lensing decreases. The analysis of attenuation at 1 km vs. frequency variations, at roughly 60 GHz, indicated a high absorption owing to air gas. Lensing attenuations are also offered as secondary outputs for convenience, the wideband channels present higher performance crossways and a wide range of target height as expected. When the target height increases, the influence of multi-path fading approximately vanishes entirely due to the variation increasing in the spreading delay between the bounce and direct pathway signals. This will reduce the coherence sum between these two samples on receiving by the target
- Open Access
- 30 January 2020
- Published by Journal of Engineering in Journal of Engineering
- Vol. 26 (2) , 99-110
Design and Analysis WIMAX Network Based on Coverage Planning
In this paper, wireless network is planned; the network is predicated on the IEEE 802.16e standardization by WIMAX. The targets of this paper are coverage maximizing, service and low operational fees. WIMAX is planning through three approaches. In approach one; the WIMAX network coverage is major for extension of cell coverage, the best sites (with Band Width (BW) of 5MHz, 20MHZ per sector and four sectors per each cell). In approach two, Interference analysis in CNIR mode. In approach three of the planning, Quality of Services (QoS) is tested and evaluated. ATDI ICS software (Interference Cancellation System) using to perform styling. it shows results in planning area covered 90.49% of the Baghdad City and used 1000 mobile subscribers and percentage connect with base station 84.3% on the establish QoS requirements .
- 30 January 2020
- Published by Journal of Engineering in Journal of Engineering
- Vol. 26 (2) , 99-110
Open AccessDesign and Analysis WIMAX Network Based on Coverage Planning
In this paper, wireless network is planned; the network is predicated on the IEEE 802.16e standardization by WIMAX. The targets of this paper are coverage maximizing, service and low operational fees. WIMAX is planning through three approaches. In approach one; the WIMAX network coverage is major for extension of cell coverage, the best sites (with Band Width (BW) of 5MHz, 20MHZ per sector and four sectors per each cell). In approach two, Interference analysis in CNIR mode. In approach three of the planning, Quality of Services (QoS) is tested and evaluated. ATDI ICS software (Interference Cancellation System) using to perform styling. it shows results in planning area covered 90.49% of the Baghdad City and used 1000 mobile subscribers and percentage connect with base station 84.3% on the establish QoS requirements .
- Open Access
- 8 April 2018
- Published by Al-Khwarizmi Engineering Journal in Al-Khwarizmi Engineering Journal
- Vol. 14 (1) , 156-163
Energy Consumption Analyzing in Single hop Transmission and Multi-hop Transmission for using Wireless Sensor Networks
Wireless sensor networks (WSNs) are emerging in various application like military, area monitoring, health monitoring, industry monitoring and many more. The challenges of the successful WSN application are the energy consumption problem. since the small, portable batteries integrated into the sensor chips cannot be re-charged easily from an economical point of view. This work focusses on prolonging the network lifetime of WSNs by reducing and balancing energy consumption during routing process from hop number point of view. In this paper, performance simulation was done between two types of protocols LEACH that uses single hop path and MODLEACH that uses multi hop path by using Intel Care i3 CPU (2.13GHz) laptop with MATLAB (R2014a). The simulation results showed how the multi-hop protocol was more energy efficient than single hop protocol.
- 8 April 2018
- Published by Al-Khwarizmi Engineering Journal in Al-Khwarizmi Engineering Journal
- Vol. 14 (1) , 156-163
Open AccessEnergy Consumption Analyzing in Single hop Transmission and Multi-hop Transmission for using Wireless Sensor Networks
Wireless sensor networks (WSNs) are emerging in various application like military, area monitoring, health monitoring, industry monitoring and many more. The challenges of the successful WSN application are the energy consumption problem. since the small, portable batteries integrated into the sensor chips cannot be re-charged easily from an economical point of view. This work focusses on prolonging the network lifetime of WSNs by reducing and balancing energy consumption during routing process from hop number point of view. In this paper, performance simulation was done between two types of protocols LEACH that uses single hop path and MODLEACH that uses multi hop path by using Intel Care i3 CPU (2.13GHz) laptop with MATLAB (R2014a). The simulation results showed how the multi-hop protocol was more energy efficient than single hop protocol.