Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jaebum Park has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Extreme Precipitation Dynamics and El Niño–Southern Oscillation Influences in Kathmandu Valley, Nepal

    by Deepak Chaulagain, Ram Lakhan Ray, Abdulfati Olatunji Yakub, Noel Ngando Same, Jaebum Park, Anthony Fon Tangoh, Jong Wook Roh, Dongjun Suh, Jeong-Ok Lim, Jeung-Soo Huh

    Understanding historical climatic extremes and variability is crucial for effective climate change adaptation, particularly for urban flood management in developing countries. This study investigates historical precipitation trends in the Kathmandu Valley, Nepal, focusing on precipitation frequency, intensity, and the influence of the El Niño–Southern Oscillation (ENSO), using extreme precipitation indices and the precipitation concentration index (PCI). The results reveal sharply fluctuating short-term precipitation from 1980 to 2022, with the exception of an increasing trend during spring (1.17 mm/year) and a decreasing trend in November and December. Trends in extreme precipitation indices are mixed: RX7day shows an increasing trend of 0.1 mm/year, with decadal analysis (1980–2001 and 2002–2022) indicating similar upward patterns. In contrast, RX1day, RX3day, RX5day, and R95pTOT exhibit inconsistent trends, while R99pTOT demonstrates a decreasing trend over the full period (1980–2022). Although the number of days with precipitation ≥ 35 mm has declined, the increasing trend in 7-day maximum precipitation, coupled with no significant change in total annual precipitation and highly variable short-term rainfall, points to a rising risk of unexpected extreme precipitation events. Precipitation patterns in the Kathmandu Valley remain highly irregular across seasons, except during summer. ENSO exhibits a negative correlation with annual precipitation, extreme precipitation indices, and the PCI but shows a positive correlation with the annual and summer PCI as well as 1-day maximum precipitation, emphasizing its significant influence on precipitation variability. These findings highlight the urgent need for targeted climate adaptation strategies and provide valuable insights for hydrologists, meteorologists, policymakers, and urban planners to enhance climate resilience and improve flood management in the Kathmandu Valley.


  • Open Access

    Optimal Hybrid Renewable Energy System to Accelerate a Sustainable Energy Transition in Johor, Malaysia

    by Pei Juan Yew, Deepak Chaulagain, Noel Ngando Same, Jaebum Park, Jeong-Ok Lim, Jeung-Soo Huh

    As the world’s second-largest palm oil producer, Malaysia heavily depends on its extensive oil palm cultivation, which accounts for nearly 90% of the country’s lignocellulosic biomass waste. Approximately 20–22 tonnes of empty fruit bunches (EFBs) can be derived from an initial yield of 100 tonnes of fresh fruit bunches (FFBs) from oil palm trees. The average annual amount of EFBs produced in Johor is 3233 tonnes per day. Recognising that urban areas contribute significantly to anthropogenic greenhouse gas emissions, and to support Malaysia’s transition from fossil fuel-based energy to a low-carbon energy system, this research employed HOMER Pro software 3.18.3 to develop an optimal hybrid renewable energy system integrating solar and biomass (EFB) energy sources in Johor, Malaysia. The most cost-effective system (solar–biomass) consists of 4075 kW solar photovoltaics, a 2100 kW biomass gasifier, 9363 battery units and 1939 kW converters. This configuration results in a total net present cost (NPC) of USD 44,596,990 and a levelised cost of energy (LCOE) of USD 0.2364/kWh. This system satisfies the residential load demand via 6,020,427 kWh (64.7%) of solar-based and 3,286,257 kWh (35.3%) of biomass-based electricity production, with an annual surplus of 2,613,329 kWh (28.1%). The minimal percentages of unmet electric load and capacity shortage, both <0.1%, indicate that all systems can meet the power demand. In conclusion, this research provides valuable insights into the economic viability and technical feasibility of powering the Kulai district with a solar–biomass system.


  • Open Access

    Comprehensive Analysis of Land Use Change and Carbon Sequestration in Nepal from 2000 to 2050 Using Markov Chain and InVEST Models

    by Deepak Chaulagain, Ram Lakhan Ray, Abdulfatai Olatunji Yakub, Noel Ngando Same, Jaebum Park, Dongjun Suh, Jeong-Ok Lim, Jeung-Soo Huh

    The escalating pace of migration and urbanization in Nepal has triggered profound alterations in land use practices. This event has resulted in a considerable diminution of ecological diversity and a substantial decline in the potential for carbon sequestration and other ecosystem services, thereby impeding climate change mitigation efforts. To address this, a comprehensive assessment of land use change and carbon storage was conducted from 2000 to 2019 and forecasted to 2050 in Nepal. Employing the Markov chain and InVEST models, this study evaluated the loss and gain of carbon, elucidating its economic value and spatial distribution. The findings revealed that carbon storage in 2000 and 2019 were 1.237 and 1.271 billion tons, respectively, with a projected increase to 1.347 million tons by 2050. Carbon sequestration between 2000 and 2019 amounted to 34.141 million tons, which is anticipated to surge to 76.07 million tons from 2019 to 2050, translating to economic valuations of 110.909 and 378.645 million USD, respectively. Forests emerged as pivotal in carbon storage, exhibiting higher carbon pooling than other land use types, expanding from 37% to 42% of the total land area from 2000 to the predicted year 2050. Notably, carbon distribution was concentrated in parts of the terai and mountain regions, alongside significant portions of the hilly terrain. The findings from this study offer valuable insights for governing Nepal and REDD+ in developing and implementing forest management policies. The results emphasize the importance of providing incentives to local communities judiciously to promote effective conservation measures.


  • Open Access

    Formaldehyde Gas Sensing Characteristics of ZnO-TiO2 Gas Sensors

    by Jaebum Park, Jihoon Lee, Myung Sik Choi, Jeung-Soo Huh

    Since the increase in the emission of various Volatiles Organic Compounds, gas and formaldehyde gas have had a harmful effect on the human body, and gas sensors that can measure those gases were fabricated in this study. After Pt coating was performed on the alumina substrate, Zn seed layers were fabricated. Nanostructures were formed through sonochemical synthesis by varying the ratio of ZnO and TiO2. Thereafter, the reactivity and recovery properties were compared and evaluated according to the concentrations of formaldehyde and toluene gas. The ZnO(99%)-TiO2(1%) gas sensor showed meaningful selectivity of about 40% or more at a concentration ranging from 5 to 20 ppm (high concentration) of formaldehyde and toluene gas, and showed a low selectivity of about 5% or more for a concentration ranging from 0.1 to 1 ppm (low concentration) of formaldehyde and toluene gas. This sensor can be optimized to have a meaningful selectivity of formaldehyde gas compared to other Volatiles Organic Compounds gases by optimizing the ZnO-TiO2 nanostructure.


  • Open Access

    Comparison of Characteristics of a ZnO Gas Sensor Using a Low-Dimensional Carbon Allotrope

    by Jihoon Lee, Jaebum Park, Jeung-Soo Huh

    Owing to the increasing construction of new buildings, the increase in the emission of formaldehyde and volatile organic compounds, which are emitted as indoor air pollutants, is causing adverse effects on the human body, including life-threatening diseases such as cancer. A gas sensor was fabricated and used to measure and monitor this phenomenon. An alumina substrate with Au, Pt, and Zn layers formed on the electrode was used for the gas sensor fabrication, which was then classified into two types, A and B, representing the graphene spin coating before and after the heat treatment, respectively. Ultrasonication was performed in a 0.01 M aqueous solution, and the variation in the sensing accuracy of the target gas with the operating temperature and conditions was investigated. As a result, compared to the ZnO sensor showing excellent sensing characteristics at 350 °C, it exhibited excellent sensing characteristics even at a low temperature of 150 °C, 200 °C, and 250 °C.


  • Open Access

    Application of Graphene Oxide as a Biomaterial for the Development of Large-Area Cell Culture Vessels

    by Jae-Bum Park, Dan-Bi Park, Ji-Hoon Lee, Su-Jeong Yang, Ji-Eun Lee, Jin-Kyung Park, Jeung-Soo Huh, Jeong-Ok Lim

    In this study, graphene oxide (GO) was coated on the surface of a large-area polystyrene film using spray coating. To analyze the possibility of developing a large-area cell culture vessel from this material, the mechanical properties of the coated surface as well as the cell compatibility and cell proliferation in the vessel were evaluated. Step measurements confirmed a curve of 100 nm or larger on the cell culture vessel surface. The surface was composed of GO (as determined from Raman spectroscopy) and its measured transmittance was ~90% or higher. The coated surface was rendered hydrophilic with an increase in surface energy. Although the cells hardly grew on the general polystyrene film, they attached and proliferated on the polystyrene film coated with GO. Zero cytotoxicity was reported, particularly in the sample that was spray-coated three times at 93.75 mm/s. Note that the cell viability was 1.43 times higher than that in the conventional cell culture vessel. Economic and efficient large-area cell culture vessels can be developed if the GO coating establishes an appropriate surface roughness and surface energy.