LVLorenzo Vincenti

Lorenzo Vincenti

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lorenzo Vincenti has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Sustainable AFM-Based Nanolithography on Chitosan Thin Films for 2.5D and 3D Nanostructure Fabrication

    by Lorenzo Vincenti, Isabella Farella, Mariafrancesca Cascione, Valeria De Matteis, Adriana Campa, Annalisa Bianco, Maurizio Martino, Fabio Quaranta, Alessandro Paolo Bramanti, Rosaria Rinaldi, et al.

    The growing request for more sustainable materials and environmentally friendly nanofabrication methods in the electronics field has recently driven the scientific community in the development of bio-derived materials as an alternative to conventional lithographic resists. In this work, we used chitosan, a biodegradable and biocompatible polysaccharide, as a green direct-write resist material for Atomic Force Microscopy-based nanolithography. Chitosan thin layers were obtained by spin coating and systematically characterized, in terms of thickness and surface roughness, demonstrating nanoscale smoothness and tunable film thickness. Three Pulse–Atomic Force Lithography (P-AFL) approaches, i.e., Constant Pulse, Gradient Pulse, and Raster Pulse AFL methods, were used to pattern nanostructures with constant-depth nanogrooves, variable-depth (2.5D) profile, and three-dimensional nanoholes on chitosan films. The results reveal high pattern fidelity, reproducibility, and tunability of feature dimensions as a function of applied force and scanning direction. Moreover, the RP-AFL technique enabled the fabrication of well-defined 3D nanostructures with depths matching the film thickness, which is a prerequisite for subsequent pattern transfer. This experimental work provided a first proof-of-concept to adopt chitosan as a more sustainable alternative with respect to conventional resists. Moreover, the results highlight P-AFL methods as a versatile and low-impact nanofabrication strategy, contributing to the development of greener micro- and nano-manufacturing technologies.


  • Open Access

    Eco-friendly platforms for Next-Generation Electronics: Sustainable Gold Nanowire Fabrication using Pulse-Atomic Force nanolithography on Chitosan Films

    by Paolo Pellegrino, Lorenzo Vincenti, Annalisa Bianco, Isabella Farella, Valeria De Matteis, Fabio Quaranta, Mariafrancesca Cascione, Rosaria Rinaldi

    The rapid growth of miniaturized, high-performance electronics has created an urgent need for sustainable materials and, consequently, nanofabrication methods that minimize environmental and health impacts. Conventional micro and nanolithography methods rely on toxic materials and energy-intensive processes, contributing to escalating e-waste and environmental inequities. To address these challenges, research has increasingly focused on biodegradable polymers and green lithographic techniques as viable alternatives for next-generation device manufacturing. Here, a fully sustainable nanofabrication strategy that integrates chitosan-based biodegradable thin films with Constant Pulse-Assisted Force Lithography (CP-AFL) for high-resolution nanopatterning is presented. Using CP-AFL, reproducible arrays of nanogrooves with tunable depths, which served as templates for the formation of gold nanowires, were fabricated. This process achieved precise nanoscale control under ambient conditions without the use of toxic chemicals, high-energy radiation, or advanced instrumentation. These results demonstrate the potential of combining biopolymer resists with low-energy, solvent-free lithography to advance eco-friendly micro- and nanomanufacturing. By providing a scalable, industrially compatible, and environmentally benign pathway for device fabrication, this work moves the field closer to sustainable electronics suitable for applications in flexible, biomedical, and transient devices.

  • Open Access

    Effect of PET Micro/Nanoplastics on Model Freshwater Zooplankton

    by Natan Rajtar, Małgorzata Starek, Lorenzo Vincenti, Monika Dąbrowska, Marek Romek, Rosaria Rinaldi, Francesca Lionetto, Mariusz Kepczynski

    Micro- and nanoplastic pollutants are among the major environmental challenges, and are exacerbated by the continuous degradation of growing amounts of plastic debris in the aquatic environment. The purpose of this study was to investigate the morphology of micro/nanoplastics (M/NPs) formed from polyethylene terephthalate (PET) by mechanical degradation in an aquatic environment, which mimics the processes in the natural environment well, and to determine the impact of these particles on model aquatic organisms. To this end, M/NPs were obtained by ball milling in an aqueous medium and the effect of milling length on particle size and shape was investigated. The particles obtained in an environment simulating natural conditions were irregularly shaped, and those of nanometric size tended to form aggregates of various shapes. The ingestion and toxicity of PET M/NPs to freshwater zooplankton were then assessed. Daphnia magna and Thamnocephalus platyurus were used in a series of acute ecotoxicity tests, by exposure to M/NP dispersions at environmentally realistic concentrations (0.01–1.0 mg/L), as well as at very high concentrations (100–1000 mg/L). A significant uptake of PET particles by both types of invertebrates was observed, and the M/NPs were mainly concentrated in the digestive tracts of the crustaceans. However, they did not cause acute toxicity to the tested organisms or a reduction in their swimming activity, even at concentrations as high as 1000 mg/L.


  • Open Access

    Raster-Atomic force nanolithography: New insights towards the fabrication of 3D nanostructures on PMMA and Silicon Nitride

    by Lorenzo Vincenti, Paolo Pellegrino, Isabella Farella, Mariafrancesca Cascione, Valeria De Matteis, Fabio Quaranta, Rosaria Rinaldi


  • Open Access

    Morphological and mechanical variations in E. coli induced by PMMA nanostructures patterned via electron beam lithography: An atomic force microscopy study

    by Paolo Pellegrino, Isabella Farella, Valeria De Matteis, Mariafrancesca Cascione, Matteo Calcagnile, Stefania Villani, Lorenzo Vincenti, Pietro Alifano, Fabio Quaranta, Rosaria Rinaldi


  • Open Access

    Tuning antibacterial efficacy against Pseudomonas aeruginosa by using green AgNPs in chitosan thin films as a plastic alternative

    by Stefania Villani, Valeria De Matteis, Matteo Calcagnile, Mariafrancesca Cascione, Paolo Pellegrino, Lorenzo Vincenti, Christian Demitri, Pietro Alifano, Rosaria Rinaldi


  • Open Access

    Crafting at the nanoscale: A comprehensive review of mechanical Atomic force microscopy-based lithography methods and their evolution

    by Lorenzo Vincenti, Paolo Pellegrino, Mariafrancesca Cascione, Valeria De Matteis, Isabella Farella, Fabio Quaranta, Rosaria Rinaldi


  • Open Access

    Morpho-Mechanical Characterization and Removal Strategy of Pile-Ups in AFM-Based Nanolithography

    by Paolo Pellegrino, Isabella Farella, Lorenzo Vincenti, Mariafrancesca Cascione, Valeria De Matteis, Fabio Quaranta, Rosaria Rinaldi

    Nowadays, mechanical AFM-based nanolithography has emerged as the most promising nanolithography technique, allowing the patterning of nanostructures on polymer layers with a sub-nanometer resolution. In such a stimulating context, we developed the Pulse-AFM method to obtain continuous structures with a controlled depth profile, either constant or variable, on a polymer layer. However, those nanostructures are contoured by polymer pile-ups that limit their integration into high-tech devices. Since pile-up removal is still an open challenge, AFM force–distance curve analysis was performed to characterize the stiffness of bulges, and an effective strategy to easily remove pile-ups while preserving the shape and morphology of nanostructures was then developed.

  • Open Access

    Fabrication of 3D Nanostructures via AFM-Based Nanolithography

    by Lorenzo Vincenti, Paolo Pellegrino, Isabella Farella, Mariafrancesca Cascione, Valeria De Matteis, Fabio Quaranta, Rosaria Rinaldi

    The increasing use of nanomaterials in high-tech devices has posed an exciting challenge for the scientific community to develop new, easy, high-throughput nanofabrication approaches. Here, we present an easy AFM-based nanofabrication approach based on Static Plowing Lithography, with which we are able to realize patterns of 3D nanostructures on a thin PMMA layer. By coupling a wet etching process with ultrasound exposure, we effectively removed the polymer bulges at the nanostructure’s borders, increasing the quality of the patterned 3D nanostructures, and paving the way for their integration into lab-on-a-chip devices.


  • Open Access

    Pile-Ups Formation in AFM-Based Nanolithography: Morpho-Mechanical Characterization and Removal Strategies

    by Paolo Pellegrino, Isabella Farella, Mariafrancesca Cascione, Valeria De Matteis, Alessandro Paolo Bramanti, Lorenzo Vincenti, Antonio Della Torre, Fabio Quaranta, Rosaria Rinaldi

    In recent decades, great efforts have been made to develop innovative, effective, and accurate nanofabrication techniques stimulated by the growing demand for nanostructures. Nowadays, mechanical tip-based emerged as the most promising nanolithography technique, allowing the pattern of nanostructures with a sub-nanometer resolution, high reproducibility, and accuracy. Unfortunately, these nanostructures result in contoured pile-ups that could limit their use and future integration into high-tech devices. The removal of pile-ups is still an open challenge. In this perspective, two different AFM-based approaches, i.e., Force Modulation Mode imaging and force-distance curve analysis, were used to characterize the structure of pile-ups at the edges of nanogrooves patterned on PMMA substrate by means of Pulse-Atomic Force Lithography. Our experimental results showed that the material in pile-ups was less stiff than the pristine polymer. Based on this evidence, we have developed an effective strategy to easily remove pile-ups, preserving the shape and the morphology of nanostructures.