CCCody B. Cockreham

Cody B. Cockreham

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Cody B. Cockreham has a total of 60 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Quantifying Post‐Exotherm Molar Gas Yields From Thermal Decomposition of CHNO High Explosives for Compatibility and Pressure‐Screening Calculations

    by Steven A. Hawks, Maxwell P. Lynch, Cody B. Cockreham, Ginger Guillen, Alexander E. Gash, Alan J. DeHope, Elizabeth A. Glascoe

    To inform safety and compatibility calculations, we measured the total post‐exotherm molar gas yield following thermal decomposition of PETN, RDX, HMX, LLM‐105, and TATB in an accelerating rate calorimeter (ARC). The measured yields, which span 22.0–32.4 mol , provide a basis for estimating decomposition extent from evolved‐gas measurements and serve as critical input for the approximation of high‐ullage vessel pressures following thermal decomposition of a CHNO material. For all five compounds, the measurements were within 10% of Cheetah thermochemical‐equilibrium predictions after the predicted water contribution was excluded, which is consistent with water condensation in cooler portions of the apparatus. The Cheetah‐estimated values also agree with a simple stoichiometry‐based calculation, enabling a survey of predicted gas yields of 1,454 CHNO compounds. For the chemical reactivity test (CRT) criterion of 0.75 , the evolved gas corresponds to approximately 0.10%–0.15% of the measured post‐exotherm gas yield. Expressing CRT and related gas‐evolution measurements, such as vacuum stability, on this common basis helps connect legacy data to kinetic models and complementary compatibility techniques such as heat‐flow calorimetry.

  • Open Access

    Interpretable Latent-Factor Machine Learning for Vapor Solubility in Amorphous Polymers

    by Brandon L. Foley, Cody B. Cockreham, Sylvie Aubry, Maxwell Murialdo

    Machine-learning methods are applied to predict the Henry solubility of vapors in polymers through low-rank matrix-factor models. A systematic evaluation of the predictive capability of varying model ranks shows that rank-2 models have the best predictive power without the risks of instability or overfitting for the dataset in this work. The rank-2 model predicted the Henry solubilities within a multiplicative factor of 1.5 in 95% of cases for 43 vapors in nine polymers and at six temperatures. The vapors and polymers in this study span a range of chemical characteristics, including alkanes, olefins, oxygen-containing organic molecules, and halogenated hydrocarbons. Comparison of the latent factors against the polarizability, hydrogen bonding, and volumetric character of each vapor suggests that the two latent features learned by the model are the nonspecific dispersive character and specific polar/hydrogen-bonding character of the vapor/polymer. This model enables the determination of the solvation character of additional polymers by calibrating their feature vectors on as few as four chemically distinct vapors. The feature vector for the newly calibrated polymer can then be used to predict the solubility of the remaining untested vapors within this polymer, enabling a significant reduction in the number of experiments required to complete the solubility matrix and providing an avenue for estimating the solubilities of difficult-to-measure vapor–polymer interactions. Finally, the UNIFAC 2.0 model with free-volume correction is evaluated for predicting Henry solubilities of vapors in polymers, and its performance is compared to the low-rank model derived in this work.

  • Open Access

    A Flexible Open-Source Mass Transport Framework for Analyzing Dynamic Outgassing Experiments

    by Steven A. Hawks, Jaisree Iyer, Brandon L. Foley, Benjamin M. Gordon, Cody B. Cockreham, Sarah C. Chinn, Susan A. Carroll

    Mass transport modeling plays a critical role in characterizing volatile organic compound (VOC) emissions from materials in applications ranging from indoor air quality to food packaging. Despite their widespread use, existing models often lack accessibility because source code is not provided or lack flexibility due to the reliance on Laplace transform methods that cannot accommodate complex experimental conditions. Here, we present a versatile open-source framework in Python that addresses these limitations. The framework employs a mass-conservative finite-volume formulation of the method of lines (MOL) with efficient ODE solvers to model diffusion and mass transport in slab, rod, and spherical geometries with arbitrarily time-varying temperature, flow, feed concentration, and chemical generation. We validate the framework against analytical solutions and reproduce prior literature results, demonstrating that extending the model to include a finite interfacial transfer coefficient can meaningfully improve fits to experimental sorption data. We further illustrate the framework’s utility through comprehensive analysis of multiple headspace extraction (MHE) and temperature-programmed desorption (TPD) experiments, leveraging its computational efficiency to perform high-resolution parameter sweeps and global multi-temperature fitting. Together, these capabilities make the framework an adaptable open-source tool for designing experiments and interpreting material emission and sorption data.

  • Open Access

    Subsurface thermal loading simulations to assess the viability of waste canister disposal in the Negev Desert, Israel

    by Dolan D. Lucero, Katherine C. Swager, Noa Balaban, Cody Cockreham, Hakim Boukhalfa, S. Michelle Bourret, Gilles Y. Bussod, Rani Calvo, Ofra Klein‐BenDavid, Itay J. Reznik, et al.

    As part of a collaboration between the United States and Israel, we are investigating the viability of subsurface spent nuclear fuel (SNF) disposal in the Negev Desert, Israel. The proposed SNF disposal concept consists of a field of intermediate‐depth boreholes (IDBs) completed to a depth of ∼300 m within the vadose zone. The target geologic repository, the Ghareb Formation, will act as a geologic barrier due to its low permeability and its organic‐rich carbonates with high uranium sorption capacity. SNF will generate heat for thousands of years via radioactive decay and implications of thermal loading must be assessed on the surrounding rock during peak temperatures. Here, we assess deviations of temperature, saturation, and pressure fields due to SNF thermal loading of a single IDB by using the multiphase porous flow and transport simulator, finite element heat and mass transfer code. The kinetic equations to simulate the degradation of organic materials were derived from thermal analysis of Ghareb Formation samples. Since the design of the borehole is not fully realized, including the amount of SNF to be disposed of in each IDB, simulated scenarios including thermal loading, steam and petroleum generation, and the presence/absence of karst features are investigated. Peak temperatures are achieved after 10 years. Near‐field temperature gradients show a strong dependence on the thermal conductivity of surrounding lithologies and the decaying heat source of the simulated waste packages. At temperatures above 265°C, vaporization of pore waters and gas generation from thermal degradation of bituminous marls leads to near lithostatic fluid pressures and probability of hydrofracture.


  • Layers Can Be Deceiving: A Hopping Model for Small Molecule Diffusion in TATB Crystal

    by Jeremy A. Scher, Brandon R. Foley, Cody B. Cockreham, Maxwell R. Murialdo, Sylvie Aubry, Matthew P. Kroonblawd

    Sorption of small molecule gases in materials can play a significant role in their long‐term stability and compatibility within multi‐material assemblies. While many material properties of the insensitive high explosive TATB (1,3,5‐triamino‐2,4,6‐trinitrobenzene) are well understood, very little is known regarding its permeability to gases. TATB crystal exhibits a graphitic‐like layered packing structure that evokes a mental schema in which the layers form nanoscopic channels, but it is unclear whether this structure promotes gas transport. We use molecular dynamics (MD) simulations to predict transport of small molecules through TATB single crystal. An approach to fit classical force fields is developed to model TATB interactions with H2O, He, Ne, and Ar, which is then combined with steered MD to probe gas transport along selected directions in the crystal. We find that small molecule transport occurs via a hopping mechanism that exhibits distinct jumps between interstitial sites and is substantially faster normal to the layers as compared to through them. This result stems from the finding that intralayer junctions between adjacent TATB molecules are the most stable interstitial sites and that energetic barriers are lower for hopping between adjacent layers. An empirical model for diffusion rate based on the MD data shows that the rate decays exponentially with increasing molecular radius and is negligibly small for all molecules larger than He, including common atmospheric gases. These findings have implications for the interpretation of experiments that measure surface area, material response to extreme conditions, and are expected to help constrain models for material aging.


  • Open Access

    Cure Kinetics and Thermal Behavior of a Printable Polydimethylsiloxane-Based Polymer

    by Cody Cockreham, John Rosener, Steven A. Hawks, Elizabeth Glascoe

    In this study, we investigate the curing reaction kinetics and degree of cross-linking of LL50, a polydimethylsiloxane (PDMS)-based polymer, using isothermal heat flow calorimetry (HFC). LL50, developed by Lawrence Livermore National Laboratory, is a two-part addition-curing liquid silicone rubber for direct-ink-writing additive manufacturing. The curing process, driven by a platinum-catalyzed hydrosilylation reaction, was monitored under isothermal conditions at various temperatures. We developed a kinetic model to predict the curing rate and extent of the reaction. The model was validated within the temperature range of 50 to 80 °C, showing good agreement with experimental data. However, the model's extrapolation to near-room temperatures (30 °C) was less accurate, indicating that different kinetic mechanisms may be at play. Our findings highlight the importance of validating kinetic models across relevant temperature ranges and underscore the utility of isothermal calorimetry in studying polymer curing processes. This study provides insights into the processing conditions necessary for the optimal performance of LL50 in 3D printing applications.


  • Kinetics of Pyrolysis and Thermal Evolution of Negev Desert Lithologies

    by Cody Cockreham, Xianghui Zhang, Andrew C. Strzelecki, Chris Benmore, Christopher Campe, Xiaofeng Guo, Yoav O. Rosenberg, Itay J. Reznik, Ofra Klein-BenDavid, Dolan D. Lucero, et al.


  • Open Access

    Layers can be deceiving: A hopping model for small molecule diffusion in TATB crystal

    by Jeremy Scher, Brandon Foley, Cody Cockreham, Maxwell Murialdo, Sylvie Aubry, Matthew Kroonblawd

    Many material properties of the insensitive high explosive TATB (1,3,5-triamino-2,4,6- trinitrobenzene) exhibit pronounced anisotropy due to its graphitic-like layered crystal packing structure. This structure evokes a mental schema in which the layers form nanoscopic channels, but very little is known regarding the permeability of the lattice by small molecules. We use molecular dynamics (MD) simulations to obtain predictions for the diffusion of small molecules through TATB single crystal. An approach to fit classical MD force fields is developed to accurately model interactions between TATB and small molecules including H2O, He, Ne, and Ar. Fitted force fields are combined with a steered MD approach to probe transport of these small molecules along selected directions in the crystal. We find that small molecule transport occurs via a hopping mechanism exhibited by distinct jumps between interstitial sites. Perhaps counter-intuitively, we find that transport via the hopping mechanism is substantially faster normal to the layers as compared to along them. This result stems from the finding that intralayer junctions between adjacent TATB molecules are the most stable interstitial sites, which leads to lower energetic barriers along directions that have a component normal to the layers. An empirical model for diffusion rate based on the MD data shows that the rate decays exponentially with increasing molecular radius and is negligibly small for for all molecules larger than He, including common atmospheric gases. These findings have implications on the interpretation of experiments that measure surface area, material response to extreme conditions, and material aging.

  • Open Access

    A new methodology for measuring the enthalpies of mixing and heat capacities of molten chloride salts using high temperature drop calorimetry

    by Andrew C. Strzelecki, Cody B. Cockreham, S. Scott Parker, Shane C. Mann, Charles Lhermitte, Di Wu, Xiaofeng Guo, Marisa Monreal, J. Matt Jackson, Jeremy Mitchell, et al.

    Molten salt reactors (MSRs) are a promising alternative to conventional nuclear reactors as they may offer more efficient fuel utilization, lower waste generation, and improved safety. The state of knowledge of the properties of liquid salts is far from complete. In order to develop the MSR concept, it is essential to develop a fundamental understanding of the thermodynamic properties, including the heat capacities (Cp) and enthalpies of mixing (ΔHmix), of molten salts at MSR operating conditions. Historically, the Cp values of molten salts were determined by drop-calorimetry or differential scanning calorimetry, whereas their ΔHmix values were typically measured using specialized high temperature calorimeters. In this work, a new methodology for measuring both the Cp and the ΔHmix of molten chloride salts was developed. This novel method involves sealing a chloride salt sample in a nickel capsule and performing conventional transposed temperature drop calorimetry using a commercially available Setaram AlexSYS-800 Tian–Calvet twin microcalorimeter. This methodology may be applied to calorimetric measurements of more complex salt mixtures, especially mixtures containing actinides and fission products.