Leyla Yanmaz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Leyla Yanmaz has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Filiz Cinar Sahin
Istanbul Technical University
7 shared publications - Demet Aydogmus4 shared publications
- Berkay Uygun3 shared publications
- Bulent Buyuk
Bandırma Onyedi Eylül University
2 shared publications Abdessabour Benamor
1 shared publication- Ahmed Zegai1 shared publication
Latest Publications
- Open Access
- 25 August 2026
- Published by Elsevier in Nuclear Engineering and Technology
- Vol. 59 (1)
Photon shielding response of GNP-reinforced B4C-TiB2 composites: Experimental and MCNP6.2 insights
- 25 August 2026
- Published by Elsevier in Nuclear Engineering and Technology
- Vol. 59 (1)
Open AccessPhoton shielding response of GNP-reinforced B4C-TiB2 composites: Experimental and MCNP6.2 insights
- 24 December 2025
- Published by Elsevier in Ceramics International
- Vol. 52 (5) , 6051-6065
Mechanical properties and simulation of thermal gradient formation in GNP-reinforced B4C-TiB2 ceramics by SPS
- 24 December 2025
- Published by Elsevier in Ceramics International
- Vol. 52 (5) , 6051-6065
Mechanical properties and simulation of thermal gradient formation in GNP-reinforced B4C-TiB2 ceramics by SPS
- 20 November 2025
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 349
Production and characterization of AlN and Al2O3 reinforced Ti–6Al–4V alloy via spark plasma sintering method
- 20 November 2025
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 349
Production and characterization of AlN and Al2O3 reinforced Ti–6Al–4V alloy via spark plasma sintering method
- 10 June 2025
- Published by Elsevier in Ceramics International
- Vol. 51 (23) , 38013-38024
Mechanical and tribological properties of spark plasma sintered WC-Co-Ni-Al2O3 cermets with Co substitution by Al2O3
- 10 June 2025
- Published by Elsevier in Ceramics International
- Vol. 51 (23) , 38013-38024
Mechanical and tribological properties of spark plasma sintered WC-Co-Ni-Al2O3 cermets with Co substitution by Al2O3
- 15 April 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (5) , 055302
Radiation attenuation properties of spark plasma sintered boron carbide-zirconium diboride composites against diagnostic x-rays
This study focused on the x-ray radiation attenuation properties of spark plasma sintered boron carbide-zirconium diboride (B4C-ZrB2) composites against diagnostic x-rays. The ZrB2 amount ranged from 0 to 15 vol%. Diagnostic x-rays were applied using the tube voltages ranging from 50 to 110 kV in 10 kV increments. The linear and mass attenuation coefficients, as well as the Half-Value Layers (HVLs) and Tenth-Value Layers (TVLs), were determined for all applied tube voltages. Fast neutron removal cross sections (FNRCSs) were also figured out for studied B4C-ZrB2 composites. It has been revealed that the addition of ZrB2 to B4C enhanced not only the x-ray attenuation capability across all applied tube voltages but also increased FNRCS values. In addition, Radiation attenuation ratios (RARs) and lead equivalent thickness (PbE) values were calculated for all samples. Increasing the amount of ZrB2 in the samples caused higher radiation attenuation coefficients. While one cm thick monolithic B4C had an average PbE of 0.019 mm, one cm thick B4C- %15 ZrB2 had an average PbE of 0.404 mm, which indicates that BZ15 demonstrated approximately 25 times better radiation attenuation performance than monolithic B4C. In addition, a 1 cm thick BZ15 composite provides at least 0.35 mm PbE radiation shielding performance for the studied diagnostic x-rays, which is equivalent to approximately 17.5% of the 2 mm Pb sheets typically used in x-ray protection applications. These findings have the potential to minimize Pb usage, thereby supporting sustainable alternatives. In conclusion, ZrB2-added B4C materials exhibit superior radiation attenuation properties compared to monolithic B4C.
- 15 April 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (5) , 055302
Radiation attenuation properties of spark plasma sintered boron carbide-zirconium diboride composites against diagnostic x-rays
This study focused on the x-ray radiation attenuation properties of spark plasma sintered boron carbide-zirconium diboride (B4C-ZrB2) composites against diagnostic x-rays. The ZrB2 amount ranged from 0 to 15 vol%. Diagnostic x-rays were applied using the tube voltages ranging from 50 to 110 kV in 10 kV increments. The linear and mass attenuation coefficients, as well as the Half-Value Layers (HVLs) and Tenth-Value Layers (TVLs), were determined for all applied tube voltages. Fast neutron removal cross sections (FNRCSs) were also figured out for studied B4C-ZrB2 composites. It has been revealed that the addition of ZrB2 to B4C enhanced not only the x-ray attenuation capability across all applied tube voltages but also increased FNRCS values. In addition, Radiation attenuation ratios (RARs) and lead equivalent thickness (PbE) values were calculated for all samples. Increasing the amount of ZrB2 in the samples caused higher radiation attenuation coefficients. While one cm thick monolithic B4C had an average PbE of 0.019 mm, one cm thick B4C- %15 ZrB2 had an average PbE of 0.404 mm, which indicates that BZ15 demonstrated approximately 25 times better radiation attenuation performance than monolithic B4C. In addition, a 1 cm thick BZ15 composite provides at least 0.35 mm PbE radiation shielding performance for the studied diagnostic x-rays, which is equivalent to approximately 17.5% of the 2 mm Pb sheets typically used in x-ray protection applications. These findings have the potential to minimize Pb usage, thereby supporting sustainable alternatives. In conclusion, ZrB2-added B4C materials exhibit superior radiation attenuation properties compared to monolithic B4C.
- Open Access
- 18 November 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 126 (47) , 20114-20126
B4C Composites with a TiB2-C Core–Shell Microstructure Produced by Self-Propagating High-Temperature Synthesis-Assisted Spark Plasma Sintering
- 18 November 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 126 (47) , 20114-20126
Open AccessB4C Composites with a TiB2-C Core–Shell Microstructure Produced by Self-Propagating High-Temperature Synthesis-Assisted Spark Plasma Sintering
- 16 November 2022
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 43 (4) , 1295-1302
Investigation of the density and microstructure homogeneity of square-shaped B4C-ZrB2 composites produced by spark plasma sintering method
- 16 November 2022
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 43 (4) , 1295-1302
Investigation of the density and microstructure homogeneity of square-shaped B4C-ZrB2 composites produced by spark plasma sintering method