Zhanar Bolatova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhanar Bolatova has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Alexey Pestryakov
Research School of Chemistry and Applied Biomedical Sciences, Tomsk Polytechnic University, 634050 Tomsk, Russia
3 shared publications - Alexander Ya. Pak
National Research Tomsk Polytechnic University
2 shared publications - Ekaterina Kolobova
Research School of Chemistry & Applied Biomedical Sciences, National Research Tomsk Polytechnic University, Lenin Av. 30, 634050 Tomsk, Russia
2 shared publications - Kirill Borisovich Larionov
National Research Tomsk Polytechnic University, Tomsk, Russia
2 shared publications - Sónia Alexandra Correia Carabineiro
LAQV-REQUIMTE, Department of Chemistry, NOVA School of Science and Technology, Universidade NOVA de Lisboa, 2829-516 Caparica, Portugal
2 shared publications - Dmitrii German
Research School of Chemistry and Applied Biomedical Sciences, National Research Tomsk Polytechnic University, Lenin Av. 30, 634050 Tomsk, Russia
1 shared publication
Latest Publications
- Open Access
Dry Reforming of Methane over Ni/WC Catalysts: Effect of Ni Content and CH4:CO2 Ratio
Dry reforming of methane (DRM) into synthesis gas (CO + H2) is one of the most important chemical reactions for industrial hydrogen production. It also enables the synthesis of hydrocarbons (liquid fuels) and other valuable products, providing an effective route for utilizing greenhouse gases. However, a major challenge limiting the implementation and scale-up of DRM is the high cost of stable and active noble metal-based catalysts, or the rapid deactivation of nickel- and cobalt-based catalysts due to coking and sintering of the active metal particles. In this context, the present work demonstrates that combining a highly active and inexpensive component (Ni) with tungsten carbide produces a composite material exhibiting high catalytic activity and resistance to oxidation and coking during DRM. Tungsten carbide was synthesized using a vacuum-free electric arc method, and nickel was subsequently deposited in varying amounts (1–25 wt.%) using the deposition–precipitation method with NaOH (DP). The resulting catalysts were characterized by X-ray diffraction, temperature-programmed reduction and Raman spectroscopy. Their performance was evaluated under DRM conditions, at atmospheric pressure and 800 °C, using different CH4:CO2 ratios. The most effective oxidation/(re)carbonization cycle, ensuring catalyst stability during DRM by balancing the rates of carbon formation and removal from the catalyst surface, was achieved with a nickel content of 20 wt.% and a CH4 to CO2 ratio of 0.67 in the feed gas mixture.
Open AccessDry Reforming of Methane over Ni/WC Catalysts: Effect of Ni Content and CH4:CO2 Ratio
Dry reforming of methane (DRM) into synthesis gas (CO + H2) is one of the most important chemical reactions for industrial hydrogen production. It also enables the synthesis of hydrocarbons (liquid fuels) and other valuable products, providing an effective route for utilizing greenhouse gases. However, a major challenge limiting the implementation and scale-up of DRM is the high cost of stable and active noble metal-based catalysts, or the rapid deactivation of nickel- and cobalt-based catalysts due to coking and sintering of the active metal particles. In this context, the present work demonstrates that combining a highly active and inexpensive component (Ni) with tungsten carbide produces a composite material exhibiting high catalytic activity and resistance to oxidation and coking during DRM. Tungsten carbide was synthesized using a vacuum-free electric arc method, and nickel was subsequently deposited in varying amounts (1–25 wt.%) using the deposition–precipitation method with NaOH (DP). The resulting catalysts were characterized by X-ray diffraction, temperature-programmed reduction and Raman spectroscopy. Their performance was evaluated under DRM conditions, at atmospheric pressure and 800 °C, using different CH4:CO2 ratios. The most effective oxidation/(re)carbonization cycle, ensuring catalyst stability during DRM by balancing the rates of carbon formation and removal from the catalyst surface, was achieved with a nickel content of 20 wt.% and a CH4 to CO2 ratio of 0.67 in the feed gas mixture.
- Open Access
Ni, Co and Ni-Co-Modified Tungsten Carbides Obtained by an Electric Arc Method as Dry Reforming Catalysts
Dry reforming of methane (DRM), to produce synthesis gas, is one of the most important chemical reactions used for the industrial production of hydrogen and leads to the synthesis of hydrocarbons (liquid fuels) and other valuable products. A cost-effective alternative to active and stable noble metal DRM catalysts, with comparable catalytic performance, can be composite materials based on nickel, cobalt and transition metal carbides. In this line, the present work proposes a non-standard way to obtain dry reforming catalysts of Ni, Co and Ni-Co-modified tungsten carbide (WC) produced by an electric arc method. Different amounts of nickel, cobalt and their mixtures were deposited on tungsten carbide by deposition-precipitation with NaOH (DP) and incipient wetness impregnation (IWI) methods. The resulting materials were characterized by N2 adsorption-desorption, transmission electron microscopy, energy dispersive spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy, and their performance was evaluated in DRM. The composition and preparation method of catalysts predetermined their structural, textural and electronic properties, playing a decisive role in their activity for DRM. DP-prepared 20%Ni/WC material remained resistant to oxidation, both that of the active metal (nickel) and of the tungsten carbide, as well as to coking during DRM. This sample proved to be the most active and stable among all studied materials. Possibly, the resistance to oxidation and coking was due to a more efficient implementation of the oxidation/(re)carbonization cycle on the surface of this catalyst.
Open AccessNi, Co and Ni-Co-Modified Tungsten Carbides Obtained by an Electric Arc Method as Dry Reforming Catalysts
Dry reforming of methane (DRM), to produce synthesis gas, is one of the most important chemical reactions used for the industrial production of hydrogen and leads to the synthesis of hydrocarbons (liquid fuels) and other valuable products. A cost-effective alternative to active and stable noble metal DRM catalysts, with comparable catalytic performance, can be composite materials based on nickel, cobalt and transition metal carbides. In this line, the present work proposes a non-standard way to obtain dry reforming catalysts of Ni, Co and Ni-Co-modified tungsten carbide (WC) produced by an electric arc method. Different amounts of nickel, cobalt and their mixtures were deposited on tungsten carbide by deposition-precipitation with NaOH (DP) and incipient wetness impregnation (IWI) methods. The resulting materials were characterized by N2 adsorption-desorption, transmission electron microscopy, energy dispersive spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy, and their performance was evaluated in DRM. The composition and preparation method of catalysts predetermined their structural, textural and electronic properties, playing a decisive role in their activity for DRM. DP-prepared 20%Ni/WC material remained resistant to oxidation, both that of the active metal (nickel) and of the tungsten carbide, as well as to coking during DRM. This sample proved to be the most active and stable among all studied materials. Possibly, the resistance to oxidation and coking was due to a more efficient implementation of the oxidation/(re)carbonization cycle on the surface of this catalyst.
- Open Access
Ash and Slag Waste Processing in Self-Shielded Atmospheric DC Arc Discharge Plasma
In this paper, we report the experimental results obtained in slag waste processing by direct current arc discharge initiated in ambient air. The method does not employ vacuum and gas equipment, therefore increasing the energy efficiency of processing. Plasma processing of coal slag was performed at different arc exposure times: 5, 10, 15, 20, and 25 s. The obtained materials contained a significant amount of graphite, which was removed through combustion. The micropowder based on silicon carbide and aluminum nitride was obtained and then sintered by spark plasma. The bulk ceramic samples based on silicon carbide with the hardness of ~10.4 GPa were finally fabricated.
Open AccessAsh and Slag Waste Processing in Self-Shielded Atmospheric DC Arc Discharge Plasma
In this paper, we report the experimental results obtained in slag waste processing by direct current arc discharge initiated in ambient air. The method does not employ vacuum and gas equipment, therefore increasing the energy efficiency of processing. Plasma processing of coal slag was performed at different arc exposure times: 5, 10, 15, 20, and 25 s. The obtained materials contained a significant amount of graphite, which was removed through combustion. The micropowder based on silicon carbide and aluminum nitride was obtained and then sintered by spark plasma. The bulk ceramic samples based on silicon carbide with the hardness of ~10.4 GPa were finally fabricated.