QZQingchun Zhang

Qingchun Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qingchun Zhang has a total of 102 co-authors. Here are the top co-authors by number of shared publications:

  • Hong-Ping Ma

    Institute of Wide Bandgap Semiconductors and Future Lighting, College of Intelligent Robotics and Advanced Manufacturing, Fudan University, Shanghai 200433, China

    18 shared publications
  • Yi Shen

    Institute of Wide Bandgap Semiconductors and Future Lighting, College of Intelligent Robotics and Advanced Manufacturing, Fudan University, Shanghai 200433, China

    8 shared publications
  • Wei Huang

    Jiangsu Provincial Key Laboratory of MEMS Sensors and ASIC Manufacturing Technology, School of Integrated Circuits, Jiangnan University 2 , Wuxi

    7 shared publications
  • Lin Gu

    Institute of Wide Bandgap Semiconductors and Future Lighting, College of Intelligent Robotics and Advanced Manufacturing, Fudan University, Shanghai 200433, China

    6 shared publications
  • Chengxi Ding

    Institute of Wide Bandgap Semiconductors and Future Lighting, Academy for Engineering & Technology, Fudan University, Shanghai 200433, China

    4 shared publications
  • Pan Liu

    College of Intelligent Robotics and Advanced Manufacturing, Fudan University, Shanghai, China

    4 shared publications

Latest Publications

  • γ-ray induced improvement in radiation tolerance of heterogeneously integrated GaN BJT at the base–emitter spacing region

    by Junfeng Yu, Shijie Wang, Wenzhang Du, Chunlei Wu, Li Ji, D. W. Zhang, Pengcheng Yu, Hao Gu, Jiao Liang, Hongping Ma, et al.

    This Letter reveals the mechanism for the improved radiation tolerance of heterogeneously integrated GaN bipolar junction transistors under γ-ray irradiation. The maximum current gain increases significantly from 1416 to 1700 after irradiation. Electrical measurements indicate that the base–emitter (BE) turn-on voltage (VBE,on) shifts from 1.6 to 1.5 V, facilitating enhanced forward conduction. Meanwhile, Gummel characteristics exhibit a concurrent rise in collector current and a decrease in base current. Frequency- and temperature-dependent conductance measurements reveal that, at 300 K, the interface trap density at the etched BE spacing region decreases from 3.05 × 1012–4.03 × 1012 cm−2 eV−1 to 2.39 × 1011–4.53 × 1011 cm−2 eV−1 after irradiation, together with shorter trap time constants and shallower activation energies. Unlike the conventional radiation response observed in GaN high-electron-mobility transistors, these findings suggest that γ-ray irradiation can effectively modify etch-induced interface traps at the BE spacing region, thereby enhancing carrier injection efficiency and improving the current gain of GaN BJTs. This work provides new insight into the radiation response of GaN bipolar devices and highlights their potential for radiation-tolerant bandgap voltage references.

  • Temperature-Dependent Gate Oxide Degradation and Interface-Trap Mechanisms in Planar SiC MOSFETs Under Dynamic Gate Stress

    by Jiaying Cao, Jiuyang Tang, Liudan Kong, Yuhan Duan, Yifei Chang, Qingchun Jon Zhang, Pan Liu

    The reliability of the gate oxide in SiC MOSFETs remains a critical concern for high-temperature and high-power applications. Aiming to clarify the temperature-dependent mechanisms of oxide degradation after dynamic gate stress (DGS), this work investigated the gate oxide reliability of four kinds of planar-type SiC MOSFETs under DGS at $25~^{\boldsymbol {\circ }}$ C, $75~^{\boldsymbol {\circ }}$ C, $125~^{\boldsymbol {\circ }}$ C, and $175~^{\boldsymbol {\circ }}$ C. The degradation was first characterized by ${V} _{\text {th}}$ drift, subthreshold swing (SS), subthreshold hysteresis ( $\boldsymbol {\Delta } {V} _{\text {th, {sub}}}\text {)}$ , and ${C} _{\text {iss}}$ – ${V} _{\text {GS}}$ measurements. All devices exhibited ${V} _{\text {th}}$ drift, either positive or negative, with diverse temperature dependencies: weak correlation (DUT-A), positive correlation (DUT-B), a transition from negative to positive drift with increasing temperature (DUT-C), and aggravated negative drift (DUT-D). Based on trap analysis and technology computer-aided design (TCAD) modeling, a temperature-dependent trap competition (TDTC) mechanism was identified, further revealing that both electron traps near the valence band edge and hole traps near the conduction band edge were induced by DGS. Different formation activation energies and interface qualities caused distinct temperature acceleration effects, leading to different drift directions and diverse temperature dependencies of the devices under tests (DUTs). The above findings enhance the understanding of the temperature-dependent gate oxide degradation under DGS, providing insights into SiC MOSFET reliability.


  • 1700 V Charge-Balance-Assisted SiC MOSFETs for Improved Short-Circuit Capability

    by Yuhan Duan, Shuhao Yang, Liming Che, Cancan Li, Jiuyang Tang, Guangyin Lei, Pan Liu, Qingchun Jon Zhang

    In this article, a 1700V charge-balance-assisted SiC MOSFET with an orthogonal layout was proposed, and three devices with different pillar widths were designed. Its short-circuit (SC) robustness was investigated at both 25°C and 175°C. Experimental results revealed that all the proposed devices not only exhibited improved SC capability but also achieved a reduction in on-resistance (Rdson) without compromising blocking capability. Notably, the device with a N-pillar width of 1.2 μm and a P-pillar width of 1.8 μm achieved a 20.1% reduction in Rdson, a 70% increase in short-circuit withstand time (SCWT) to 5.1 μs, and a 16.1% increase in short-circuit energy (Esc) to 2.52J under 1000V bus voltage at 25°C. The enhanced SC capability resulted from the structural optimization, which led to lower junction temperatures and slower temperature rise. In addition, the observed performance among various pillar designs was related to the lateral depletion. With such a practical device design approach, the charge-balance-assisted SiC MOSFETs demonstrated better tradeoff between Rdson and SC robustness.

  • Investigation of Degradation Mechanism in 1200-V SiC MOSFETs Under Surge Current Stress of Body Diode Using Electrothermal–Mechanical Analysis

    by Hao Guan, Yifei Chang, Pengxiang Bai, Letao Bian, Qingchun Jon Zhang, Pan Liu

    Surge reliability of SiC MOSFETs is critical for power electronic systems,mainly focusing on electro-thermal analysis. The impact of electro-thermal-mechanical influence is rarely detailed explained. This study systematically analyzed the failure mechanisms of 1200 V SiC Metal-Oxide-Semiconductor Field-Effect Transistors (MOSFETs) of both asymmetric trench and planar gate under surge current stress, using both experimental and numerical TCAD simulations. The impact of thermo-mechanical stresses on both the package and the chip performance was compared. The study revealed that the package of two devices exhibited distinct behaviors under surge current stress: for the asymmetric trench SiC MOSFET, no cracks were observed between the epoxy resin and the metal layer; whereas for the planar gate SiC MOSFET, cracks formed between the epoxy resin and the metal layer. This difference is primarily due to the thermomechanical stress variations between the epoxy resin and the metal layer in the two devices. At the chip level, both devices shared a common failure mode, where the high temperatures generated during the surge process amplify the effects of thermal expansion coefficient mismatches between different materials. This results in compressive stress within the interlayer dielectric due to the thermal expansion coefficients mismatch between the source aluminum and the interlayer dielectric, ultimately causing dielectric rupture and subsequent aluminum-gate shorting that leads to device failure. This failure mechanism further reveals the vulnerability of SiC MOSFETs under extreme operating conditions.


  • Open Access

    Advances and Perspectives in Gate Dielectric Thin Films for 4H-SiC MOSFETs

    by Zhaopeng Bai, Jinsong Liang, Chengxi Ding, Zimo Zhou, Man Luo, Lin Gu, Hong-Ping Ma, Qing-Chun Zhang

    The performance and reliability of 4H-SiC Metal-Oxide-Semiconductor Field-Effect Transistors (MOSFETs) are largely determined by the material properties of gate dielectric films and the quality of the dielectric/SiC interface. This paper provides a systematic review of recent progress in gate dielectric engineering for 4H-SiC MOSFETs, with emphasis on SiO2-based gate dielectrics and high-dielectric-constant (high-k) gate dielectrics. First, for conventional thermally grown SiO2/SiC systems, the effects of interface nitridation, gate oxide doping, and surface pretreatment techniques are comprehensively discussed. The influence mechanisms of these processes on carbon-related interface defects, interface state density and field-effect mobility are analyzed, and the advances in related research are summarized. Second, the application of high-k gate dielectrics, including Al2O3, HfO2, ZrO2, and stacked dielectric structures, in SiC MOS devices is systematically reviewed. The advantages of these materials in reducing equivalent oxide thickness, increasing gate capacitance, suppressing leakage current, and improving thermal stability are highlighted. In addition, interface defects and electrical characteristics associated with different high-k gate dielectrics are comparatively evaluated. Finally, future research directions are discussed, including in situ interface engineering based on atomic layer deposition, dopant modulation, and heterogeneous gate dielectric structures. These approaches show strong potential for achieving high mobility, low loss, and high reliability in advanced 4H-SiC power MOSFETs.


  • Open Access

    Impact of BN Buffer Layer Thickness on Interfacial Structure and Band Alignment of a-BN/4H-SiC Heterojunctions

    by Yang-Chao Liu, Wen-Jie Chen, Man Luo, Zimo Zhou, Lin Gu, Yi Shen, Xin Qi, Hong-Ping Ma, Qing-Chun Zhang

    This study provides a comprehensive investigation into the growth behavior of boron nitride (BN) buffer layers on Silicon carbide (SiC) substrates and their influence on interfacial band alignment. BN layers were deposited on semi-insulating SiC by RF magnetron sputtering with deposition times of 2.5, 5, and 7.5 min (these deposition times are specific experimental parameters to adjust the thickness of the amorphous BN layer, not intrinsic material properties of BN). Atomic force microscopy revealed that the surface roughness of the BN layers initially decreased and then increased with thickness, indicating an evolution from nucleation to continuous film formation, followed by surface coarsening. Transmission electron microscopy confirmed the BN thicknesses of approximately 3.25, 4.91, and 7.57 nm, showing that the layers gradually became uniform and compact, thereby improving the structural integrity of the BN/SiC interface. Band alignment was analyzed using the Kraut method, yielding a valence band offset of ~0.36 eV and a conduction band offset of ~2.34 eV for the BN/SiC heterojunction. This alignment indicates that the BN buffer layer introduces a pronounced electron barrier, effectively suppressing leakage, while the relatively small VBO facilitates hole transport across the interface. These findings demonstrate that the BN buffer layer enhances interfacial bonding, reduces defect states, and enables band structure engineering, offering a promising strategy for improving the performance of wide-bandgap semiconductor devices.


  • Open Access

    Improvement of Physical and Electrical Characteristics in 4H-SiC MOS Capacitors Using AlON Thin Films Fabricated via Plasma-Enhanced Atomic Layer Deposition

    by Zhaopeng Bai, Chengxi Ding, Yunduo Guo, Man Luo, Zimo Zhou, Lin Gu, Qingchun Zhang, Hongping Ma

    In this study, we investigate the improvement of physical and electrical characteristics in 4H-silicon carbide (SiC) MOS capacitors using Aluminum Oxynitride (AlON) thin films fabricated via Plasma-Enhanced Atomic Layer Deposition (PEALD). AlON thin films are grown on SiC substrates using a high ratio of NH3 and O2 as nitrogen and oxygen sources through PEALD technology, with improved material properties and electrical performance. The AlON films exhibited excellent thickness uniformity, with a minimal error of only 0.14%, a high refractive index of 1.90, and a low surface roughness of 0.912 nm, demonstrating the precision of the PEALD process. Through XPS depth profiling and electrical characterization, it was found that the AlON/SiC interface showed a smooth transition from Al-N and Al-O at the surface to Al-O-Si at the interface, ensuring robust bonding. Electrical measurements indicated that the SiC/AlON MOS capacitors demonstrated Type I band alignment with a valence band offset of 1.68 eV and a conduction band offset of 1.16 eV. Additionally, the device demonstrated a low interface state density (Dit) of 7.6 × 1011 cm−2·eV−1 with a high breakdown field strength of 10.4 MV/cm. The results highlight AlON’s potential for enhancing the performance of high-voltage, high-power SiC devices.


  • Open Access

    Phosphorus-doped silicon oxidation for carbon-free SiO2 formation on silicon carbide: Lowering of interface state density

    by Zhen-Yu Wang, Cheng-Xi Ding, Yun-Duo Guo, Zhao-Peng Bai, Qi-Min Huang, Yi Shen, Lin Gu, An-Feng Wang, Qing-Chun Zhang, Hong-Ping Ma

    In this study, a novel strategy for the formation of SiC gate oxide layers has been introduced through re-oxidation of a phosphorus-doped (P-doped) n-type silicon layer grown on SiC. This approach allows for the addition of controlled, low-dose P atoms at room temperature, thereby enabling a first-ever investigation into the impact of P-doping on the trap density distribution near the conduction band of SiC in the absence of carbon. The electrical properties of the P-doped oxide were compared with directly oxidized intrinsic silicon. The phosphorus treatment reduced the density of interface states from 4.03 × 1011 to 2.01 × 1010 cm−2 eV−1. Additionally, the findings of the study revealed a suppression of the flatband voltage hysteresis as a result of the P-doping treatment. Furthermore, the underlying mechanisms through which P-doping enhanced the interfacial performance have been explored in detail using atomic force microscopy, x-ray photoelectron spectroscopy, and first-principles calculations. The results indicated that this doping and re-oxidation method substantially optimized the elemental distribution and morphology of the SiC/SiO2 interface, thereby reducing defects near the interface.


  • Investigation of the Degradation Mechanism of β-Ga2O3 SBD on 5 MeV Proton Irradiation

    by Wenzhang Du, Yuangang Wang, Yukai Huang, Junyan Zhu, Junfeng Yu, Xiaodong Yang, Haonan Liu, Xinbo Zou, Hongping Ma, Qingchun Zhang, et al.

    The effects of 5 MeV proton irradiation on the electrical performance of β-Ga2O3 Schottky barrier diodes (SBDs) are studied in this article to demonstrate the degradation mechanism and behavior related to defects and energy band. After proton irradiation with a fluence of 1 × 1013 n/cm2, the forward current density of β-Ga2O3 SBD decreases, the barrier height rises by 0.2 eV, and the ideality factor degenerates from 1.056 to 1.092. The carrier concentration in the epilayer (from 1.05 × 1016 to 0.3 × 1016 cm-3), obtained from C–V characteristics, notably reduces due to trap states in the drift layer, leading to a higher barrier height. On the other hand, the Poole–Frenkel emission (PFE) mechanism is found to cause the reverse leakage of β-Ga2O3 SBD after proton irradiation, utilizing temperature-dependent current-voltage I–V measurements. The deep-level transient spectroscopy (DLTS) measurements further reveal that Ec-0.82 eV (shifted to Ec-0.81 eV) originates from preexisting defects, while Ec-0.72 eV and Ec-1.04 eV are newly introduced by the proton irradiation. The relatively shallow trap states Ec-0.72 eV with a large capture cross section (2.25 × 10-12 cm-2) contribute to PFE and dominate the trap-assisted leakage. Finally, the lower trap activation energy (from 0.82 to 0.72 eV) and higher Schottky barrier height (from 0.90 to 1.18 eV) both result in the degradation of both forward conduction and reverse leakage in β-Ga2O3 SBDs.