Yuliya Edgarovna Pleshivtseva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yuliya Edgarovna Pleshivtseva has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Edgar Yakovlevich Rapoport
Samara State Technical University, Samara, Russia
11 shared publications - Maxim Yurjevich Derevyanov
Samara State Technical University
9 shared publications - Egor A. Mironov
Samara State Technical University, Samara, Russia
5 shared publications - A. G. Mandra
Samara State Technical University
3 shared publications A. V. Popov
Samara State Technical University, Samara, Russia
2 shared publications- Alexander A. Afinogentov
Samara State Technical University
2 shared publications
Latest Publications
- Open Access
- 19 February 2026
- Published by Samara State Technical University
- Vol. 30 (1) , 134-154
Physics-based and machine learning approaches for modeling hydrogen production via catalytic methane decomposition
This study addresses the development and validation of advanced models for hydrogen production via catalytic hydrocarbon decomposition, with a particular focus on methane decomposition. A structural simulation model was implemented in the MATLAB/Simulink environment based on the Langmuir--Hinshelwood kinetic model. The model explicitly accounts for adsorption and desorption of reactants and products on the catalyst surface, as well as surface reactions between adsorbed intermediates. By incorporating mass and energy balance equations, the framework enables the prediction of reactant and product concentrations, reaction temperature profiles, and heat transfer between the reaction mixture and the thermal control medium. A neural network model was also developed and trained using data from 38 experiments involving 12 different catalyst compositions. This data-driven model captures nonlinear dependencies between catalyst composition, operating conditions, and process efficiency, thereby enhancing predictive performance in dynamic environments. Comparative analysis against experimental data demonstrated that the structural model achieves higher accuracy (mean absolute error, MAE = 3.35%) relative to the neural network model, which exhibited a slightly higher prediction error. The integration of physics-based simulation and machine learning approaches provides both interpretability and adaptability, highlighting the potential of hybrid modeling strategies for optimizing hydrogen production technologies. The results contribute to the broader development of advanced simulation tools for hydrogen energy applications, supporting efficiency improvements, real-time process control, and the transition toward sustainable energy systems.
- 19 February 2026
- Published by Samara State Technical University
- Vol. 30 (1) , 134-154
Open AccessPhysics-based and machine learning approaches for modeling hydrogen production via catalytic methane decomposition
This study addresses the development and validation of advanced models for hydrogen production via catalytic hydrocarbon decomposition, with a particular focus on methane decomposition. A structural simulation model was implemented in the MATLAB/Simulink environment based on the Langmuir--Hinshelwood kinetic model. The model explicitly accounts for adsorption and desorption of reactants and products on the catalyst surface, as well as surface reactions between adsorbed intermediates. By incorporating mass and energy balance equations, the framework enables the prediction of reactant and product concentrations, reaction temperature profiles, and heat transfer between the reaction mixture and the thermal control medium. A neural network model was also developed and trained using data from 38 experiments involving 12 different catalyst compositions. This data-driven model captures nonlinear dependencies between catalyst composition, operating conditions, and process efficiency, thereby enhancing predictive performance in dynamic environments. Comparative analysis against experimental data demonstrated that the structural model achieves higher accuracy (mean absolute error, MAE = 3.35%) relative to the neural network model, which exhibited a slightly higher prediction error. The integration of physics-based simulation and machine learning approaches provides both interpretability and adaptability, highlighting the potential of hybrid modeling strategies for optimizing hydrogen production technologies. The results contribute to the broader development of advanced simulation tools for hydrogen energy applications, supporting efficiency improvements, real-time process control, and the transition toward sustainable energy systems.
- 18 October 2025
- Published by Pleiades Publishing Ltd in Technical Physics
- p. 1-23
Development of Clean and Low-Carbon Hydrogen Technologies for the Decarbonization Pathway
This paper presents a detailed analysis of the effects of global hydrogen production trends on the decarbonization pathway. The study covers clean and low-carbon technologies for industrial-scale hydrogen production, defined as those capable of producing more than 100 nm3 of hydrogen per hour. The study classifies industrial-scale technologies into six categories according to their potential for industrial application within the next 15 yr. A comprehensive review of 560 major hydrogen production projects from 49 countries worldwide is conducted. The review is based on the International Energy Agency (IEA) database. It focuses on the location of the projects, the technologies applied, the renewable and non-renewable energy sources used, and the impact of hydrogen technologies on the decarbonization strategy. The hydrogen projects have been clearly classified according to the “color” of hydrogen, which conditionally reflects cleanliness of the process used for hydrogen production. The analysis compares the previous study by the authors with the current study, allowing them to identify unchanged trends and determine the changes in trends of clean and low-carbon technologies that have real prospects for industrial implementation. The demonstrated trends in the development of hydrogen production technology over the period 2000–2038 provide a clear roadmap for scientists, policy makers, industry players, and investors as they navigate the expanding hydrogen energy sector for its sustainable development. The study is based solely on information from publicly available sources.
- 18 October 2025
- Published by Pleiades Publishing Ltd in Technical Physics
- p. 1-23
Development of Clean and Low-Carbon Hydrogen Technologies for the Decarbonization Pathway
This paper presents a detailed analysis of the effects of global hydrogen production trends on the decarbonization pathway. The study covers clean and low-carbon technologies for industrial-scale hydrogen production, defined as those capable of producing more than 100 nm3 of hydrogen per hour. The study classifies industrial-scale technologies into six categories according to their potential for industrial application within the next 15 yr. A comprehensive review of 560 major hydrogen production projects from 49 countries worldwide is conducted. The review is based on the International Energy Agency (IEA) database. It focuses on the location of the projects, the technologies applied, the renewable and non-renewable energy sources used, and the impact of hydrogen technologies on the decarbonization strategy. The hydrogen projects have been clearly classified according to the “color” of hydrogen, which conditionally reflects cleanliness of the process used for hydrogen production. The analysis compares the previous study by the authors with the current study, allowing them to identify unchanged trends and determine the changes in trends of clean and low-carbon technologies that have real prospects for industrial implementation. The demonstrated trends in the development of hydrogen production technology over the period 2000–2038 provide a clear roadmap for scientists, policy makers, industry players, and investors as they navigate the expanding hydrogen energy sector for its sustainable development. The study is based solely on information from publicly available sources.
- 1 August 2025
- Published by Pleiades Publishing Ltd in Technical Physics
- Vol. 70 (8) , 314-319
Optimal Control of Induction Heating of Steel Workpieces with Respect to Minimum Scale Formation Criteria
The efficiency of metal heat treatment production processes is measured according to various characteristics, including productivity, energy consumption, and quality of the end product. Each of them can be enhanced through optimization by the relevant integral criterion. The quality of the end product made from a high-iron alloy depends, after heat treatment, on metal loss to scale, which is inevitably formed during high-intensity heating in an induction installation. For this reason, to reduce the percentage of rejects, it is necessary to find an optimal operating mode of the inductor, which will minimize this loss. This paper is devoted to the optimization of static induction heating of steel cylindrical workpieces before subsequent plastic deformation operations. A 2D numerical mathematical model of the induction heating process, developed in Altair FLUX, is considered as a controlled object with distributed parameters. Control problems with respect to time-optimal, minimum energy consumption, and minimum metal scale loss criteria are formulated. A solution to the formulated control problems after their parametrization and reduction to semi-infinite optimization can be found using the alternance method of parametric optimization of objects with distributed parameters. A system of transcendental equations is written based on the alternance method as an example for the minimum scale formation problem. These equations are closed to all unknown parameters of the heating process. The system is solved using an automated procedure developed in the MATLAB software package. An analysis of numerical results shows that solving this one-criterion optimal control problem reduces the amount of scale significantly increasing heating time compared to time-optimal and minimum energy consumption problems. That is why it is planned to solve a multi-criteria optimization problem taking into account several typical goal functions simultaneously at the next stage of research.
- 1 August 2025
- Published by Pleiades Publishing Ltd in Technical Physics
- Vol. 70 (8) , 314-319
Optimal Control of Induction Heating of Steel Workpieces with Respect to Minimum Scale Formation Criteria
The efficiency of metal heat treatment production processes is measured according to various characteristics, including productivity, energy consumption, and quality of the end product. Each of them can be enhanced through optimization by the relevant integral criterion. The quality of the end product made from a high-iron alloy depends, after heat treatment, on metal loss to scale, which is inevitably formed during high-intensity heating in an induction installation. For this reason, to reduce the percentage of rejects, it is necessary to find an optimal operating mode of the inductor, which will minimize this loss. This paper is devoted to the optimization of static induction heating of steel cylindrical workpieces before subsequent plastic deformation operations. A 2D numerical mathematical model of the induction heating process, developed in Altair FLUX, is considered as a controlled object with distributed parameters. Control problems with respect to time-optimal, minimum energy consumption, and minimum metal scale loss criteria are formulated. A solution to the formulated control problems after their parametrization and reduction to semi-infinite optimization can be found using the alternance method of parametric optimization of objects with distributed parameters. A system of transcendental equations is written based on the alternance method as an example for the minimum scale formation problem. These equations are closed to all unknown parameters of the heating process. The system is solved using an automated procedure developed in the MATLAB software package. An analysis of numerical results shows that solving this one-criterion optimal control problem reduces the amount of scale significantly increasing heating time compared to time-optimal and minimum energy consumption problems. That is why it is planned to solve a multi-criteria optimization problem taking into account several typical goal functions simultaneously at the next stage of research.
- 1 August 2025
- Published by Pleiades Publishing Ltd in Journal of Computer and Systems Sciences International
- Vol. 64 (4) , 586-601
Optimal Control in Linear–Quadratic Optimization Problems of Hyperbolic Systems with Distributed Parameters
This paper proposes a constructive method of solving the linear–quadratic problem of optimal control of hyperbolic systems with distributed parameters under the conditions of estimating in a uniform metric the target sets of final states of the controlled variable and the rate of its variation in time. The previously developed alternance method of constructing programmed control algorithms is applicable to the considered range of problems. The corresponding methodology uses the procedure of parameterization of the desired control actions on a finite-dimensional subset of an infinite number of final values of adjoint variables and the subsequent operation of exact reduction to a parametric problem of semi-infinite optimization, which is solved according to the scheme of application of the alternance method generalized to the situations under consideration. It is shown that the sought equations of the optimal controllers are reduced to linear feedback laws with time-varying coefficients based on the measurable output of the system. An example of the solution of the problem of the energy-optimal control of a system described by a wave equation of mathematical physics, which is of independent interest, is given.
- 1 August 2025
- Published by Pleiades Publishing Ltd in Journal of Computer and Systems Sciences International
- Vol. 64 (4) , 586-601
Optimal Control in Linear–Quadratic Optimization Problems of Hyperbolic Systems with Distributed Parameters
This paper proposes a constructive method of solving the linear–quadratic problem of optimal control of hyperbolic systems with distributed parameters under the conditions of estimating in a uniform metric the target sets of final states of the controlled variable and the rate of its variation in time. The previously developed alternance method of constructing programmed control algorithms is applicable to the considered range of problems. The corresponding methodology uses the procedure of parameterization of the desired control actions on a finite-dimensional subset of an infinite number of final values of adjoint variables and the subsequent operation of exact reduction to a parametric problem of semi-infinite optimization, which is solved according to the scheme of application of the alternance method generalized to the situations under consideration. It is shown that the sought equations of the optimal controllers are reduced to linear feedback laws with time-varying coefficients based on the measurable output of the system. An example of the solution of the problem of the energy-optimal control of a system described by a wave equation of mathematical physics, which is of independent interest, is given.
- Open Access
- 1 July 2025
- Published by Pleiades Publishing Ltd in Technical Physics
- Vol. 70 (7) , 272
Erratum to: Development of Clean and Low-carbon Hydrogen Technologies for the Decarbonization Pathway
An Erratum to this paper has been published: https://doi.org/10.1134/S1063784225900013
- 1 July 2025
- Published by Pleiades Publishing Ltd in Technical Physics
- Vol. 70 (7) , 272
Open AccessErratum to: Development of Clean and Low-carbon Hydrogen Technologies for the Decarbonization Pathway
An Erratum to this paper has been published: https://doi.org/10.1134/S1063784225900013
- 1 July 2025
- Published by Pleiades Publishing Ltd in Technical Physics
- Vol. 70 (7) , 249-271
Development of Clean and Low-carbon Hydrogen Technologies for the Decarbonization Pathway
This paper presents a detailed analysis of the effects of global hydrogen production trends on the decarbonization pathway. The study covers clean and low-carbon technologies for industrial-scale hydrogen production, defined as those capable of producing more than 100 nm3 of hydrogen per hour. The study classifies industrial-scale technologies into six categories according to their potential for industrial application within the next 15 years. A comprehensive review of 560 major hydrogen production projects from 49 countries worldwide is conducted. The review is based on the International Energy Agency (IEA) database. It focuses on the location of the projects, the technologies applied, the renewable and non-renewable energy sources used, and the impact of hydrogen technologies on the decarbonization strategy. The hydrogen projects have been clearly classified according to the “color” of hydrogen, which conditionally reflects cleanliness of the process used for hydrogen production. The analysis compares the previous study by the authors with the current study, allowing them to identify unchanged trends and determine the changes in trends of clean and low-carbon technologies that have real prospects for industrial implementation. The demonstrated trends in the development of hydrogen production technology over the period 2000–2038 provide a clear roadmap for scientists, policy makers, industry players, and investors as they navigate the expanding hydrogen energy sector for its sustainable development. The study is based solely on information from publicly available sources.
- 1 July 2025
- Published by Pleiades Publishing Ltd in Technical Physics
- Vol. 70 (7) , 249-271
Development of Clean and Low-carbon Hydrogen Technologies for the Decarbonization Pathway
This paper presents a detailed analysis of the effects of global hydrogen production trends on the decarbonization pathway. The study covers clean and low-carbon technologies for industrial-scale hydrogen production, defined as those capable of producing more than 100 nm3 of hydrogen per hour. The study classifies industrial-scale technologies into six categories according to their potential for industrial application within the next 15 years. A comprehensive review of 560 major hydrogen production projects from 49 countries worldwide is conducted. The review is based on the International Energy Agency (IEA) database. It focuses on the location of the projects, the technologies applied, the renewable and non-renewable energy sources used, and the impact of hydrogen technologies on the decarbonization strategy. The hydrogen projects have been clearly classified according to the “color” of hydrogen, which conditionally reflects cleanliness of the process used for hydrogen production. The analysis compares the previous study by the authors with the current study, allowing them to identify unchanged trends and determine the changes in trends of clean and low-carbon technologies that have real prospects for industrial implementation. The demonstrated trends in the development of hydrogen production technology over the period 2000–2038 provide a clear roadmap for scientists, policy makers, industry players, and investors as they navigate the expanding hydrogen energy sector for its sustainable development. The study is based solely on information from publicly available sources.
- Open Access
- 22 June 2025
- Published by Samara State Technical University in Vestnik of Samara State Technical University. Technical Sciences Series
- Vol. 33 (1) , 35-47
Optimal control of induction heating of steel workpieces with respect to minimal scale formation criteria
Efficiency of heat treatment production processes of metals is measured by different characteristics, including productivity, energy consumption and quality of end product. Increasing each of them is possible through optimization with respect to corresponding integral criteria. The quality of end product, which is made of high iron alloys, after heat treatment operations depends on metal loss to scale, that is inevitably formed during high-intensity heating in induction installation. Thus, to reduce the amount of defective details it is necessary to obtain the optimal operating mode of inductor, which will minimize the mentioned losses. The paper is devoted to optimization of static induction heating of steel cylindrical billets before the subsequent plastic deformation operations. The 2D numerical mathematical model of induction heating process, developed in Altair FLUX, is considered as a control object with distributed parameters. The optimal control problems with respect to time-optimal, minimal energy consumption and minimal scale formation criteria are formulated. The solution of formulated problems after their parametrization and reduction to semi-infinite optimization problems can be carried out using alternance method of parametric optimization of objects with distributed parameters. As an example for minimal scale formation problem, the system of transcendental equations closed with respect to all unknowns of the heating process is written based on alternance method. Solving of the system is provided by automatized procedure, which is developed in program package MATLAB. The analysis of numerical results shows that solving this one-criteria optimal control problem allows to reduce the amount of scale with significant increasing of heating time in comparison with time-optimal and minimal energy consumption problems. That is why on the next stages of the investigation it is planned to solve a multi-criteria optimization problem in order to take onto account several typical goal functions simultaneously.
- 22 June 2025
- Published by Samara State Technical University in Vestnik of Samara State Technical University. Technical Sciences Series
- Vol. 33 (1) , 35-47
Open AccessOptimal control of induction heating of steel workpieces with respect to minimal scale formation criteria
Efficiency of heat treatment production processes of metals is measured by different characteristics, including productivity, energy consumption and quality of end product. Increasing each of them is possible through optimization with respect to corresponding integral criteria. The quality of end product, which is made of high iron alloys, after heat treatment operations depends on metal loss to scale, that is inevitably formed during high-intensity heating in induction installation. Thus, to reduce the amount of defective details it is necessary to obtain the optimal operating mode of inductor, which will minimize the mentioned losses. The paper is devoted to optimization of static induction heating of steel cylindrical billets before the subsequent plastic deformation operations. The 2D numerical mathematical model of induction heating process, developed in Altair FLUX, is considered as a control object with distributed parameters. The optimal control problems with respect to time-optimal, minimal energy consumption and minimal scale formation criteria are formulated. The solution of formulated problems after their parametrization and reduction to semi-infinite optimization problems can be carried out using alternance method of parametric optimization of objects with distributed parameters. As an example for minimal scale formation problem, the system of transcendental equations closed with respect to all unknowns of the heating process is written based on alternance method. Solving of the system is provided by automatized procedure, which is developed in program package MATLAB. The analysis of numerical results shows that solving this one-criteria optimal control problem allows to reduce the amount of scale with significant increasing of heating time in comparison with time-optimal and minimal energy consumption problems. That is why on the next stages of the investigation it is planned to solve a multi-criteria optimization problem in order to take onto account several typical goal functions simultaneously.
- 1 February 2025
- Published by Pleiades Publishing Ltd in Journal of Computer and Systems Sciences International
- Vol. 64 (1) , 1-16
Dual-Channel Control with Minimum Energy Consumption in Linear-Quadratic Optimization Problems of Interconnected Heterogeneous Systems with Distributed Parameters
A constructive technology for solving problems of dual-channel control of two heterogeneous systems that are interconnected by boundary conditions with distributed parameters in linear-quadratic optimization problems by the criterion of energy saving is proposed. The resulting spatial distribution of the controlled variables is approximated with the given uniform accuracy to the desired state. The developed technique initially employs a procedure of parameterization of the desired control actions on a finite-dimensional subset of an infinite number of final values of conjugate variables. The subsequent procedure is applied for the exact reduction to a parametric problem of semi-infinite optimization, which is solved according to the scheme of the previously proposed alternance method, which has been generalized to the studied situation. It is demonstrated that the equations of optimal controllers with lumped control actions for each of the objects are reduced to linear feedback algorithms on the measured state with nonstationary transfer coefficients. An illustrative example of optimization of the process of induction heating of two unbounded plates under conditions of ideal thermal contact on their boundary surfaces, which is of independent interest, is presented.
- 1 February 2025
- Published by Pleiades Publishing Ltd in Journal of Computer and Systems Sciences International
- Vol. 64 (1) , 1-16
Dual-Channel Control with Minimum Energy Consumption in Linear-Quadratic Optimization Problems of Interconnected Heterogeneous Systems with Distributed Parameters
A constructive technology for solving problems of dual-channel control of two heterogeneous systems that are interconnected by boundary conditions with distributed parameters in linear-quadratic optimization problems by the criterion of energy saving is proposed. The resulting spatial distribution of the controlled variables is approximated with the given uniform accuracy to the desired state. The developed technique initially employs a procedure of parameterization of the desired control actions on a finite-dimensional subset of an infinite number of final values of conjugate variables. The subsequent procedure is applied for the exact reduction to a parametric problem of semi-infinite optimization, which is solved according to the scheme of the previously proposed alternance method, which has been generalized to the studied situation. It is demonstrated that the equations of optimal controllers with lumped control actions for each of the objects are reduced to linear feedback algorithms on the measured state with nonstationary transfer coefficients. An illustrative example of optimization of the process of induction heating of two unbounded plates under conditions of ideal thermal contact on their boundary surfaces, which is of independent interest, is presented.
- Open Access
- 25 December 2024
- Published by Samara State Technical University in Vestnik of Samara State Technical University. Technical Sciences Series
- Vol. 32 (3) , 32-45
Analyzing resource saving and environmental safety in oil and gas waste processing system to provide sustainable development
The problems of environmental safety and resource conservation in the processing of industrial waste at Russian oil and gas enterprises are becoming more and more significant, especially in the context of current trends focused on decarbonization and sustainable development. The growth of industrial waste is not compensated by the corresponding growth in the volume and quality of processing, since only 10% of oily waste is processed, and the rest is buried or incinerated, which has an additional harmful impact on the environment. The article proposes a new approach to multifactor analysis of resource conservation and environmental safety in the integrated processing of industrial waste from oil and gas enterprises to achieve sustainable development goals. The algorithm developed by the authors, the theoretical basis of which is the method of data envelopment analysis (DEA), determines the sequence of solving interrelated problems of multifactor comparison of objects of the waste processing system by heterogeneous quality criteria: resource value, resource potential, resource saving and environmental safety. These problems are formulated on the basis of the super-efficiency model of the DEA method as a mathematical programming problem. The presented and tested approach to multifactor analysis of resource conservation and environmental safety of the waste treatment system allows: (1) to obtain and analyze relative comparative assessments of waste storage facilities and technologies regarding heterogeneous quality criteria, and (2) forming local and general decision-making strategies that provide sustainable development goals. The proposed approach appears promising for multiple prospective applications in the oil-bearing regions of the Russian Federation, where the growth in the formation of industrial waste has severe and irreversible environmental consequences.
- 25 December 2024
- Published by Samara State Technical University in Vestnik of Samara State Technical University. Technical Sciences Series
- Vol. 32 (3) , 32-45
Open AccessAnalyzing resource saving and environmental safety in oil and gas waste processing system to provide sustainable development
The problems of environmental safety and resource conservation in the processing of industrial waste at Russian oil and gas enterprises are becoming more and more significant, especially in the context of current trends focused on decarbonization and sustainable development. The growth of industrial waste is not compensated by the corresponding growth in the volume and quality of processing, since only 10% of oily waste is processed, and the rest is buried or incinerated, which has an additional harmful impact on the environment. The article proposes a new approach to multifactor analysis of resource conservation and environmental safety in the integrated processing of industrial waste from oil and gas enterprises to achieve sustainable development goals. The algorithm developed by the authors, the theoretical basis of which is the method of data envelopment analysis (DEA), determines the sequence of solving interrelated problems of multifactor comparison of objects of the waste processing system by heterogeneous quality criteria: resource value, resource potential, resource saving and environmental safety. These problems are formulated on the basis of the super-efficiency model of the DEA method as a mathematical programming problem. The presented and tested approach to multifactor analysis of resource conservation and environmental safety of the waste treatment system allows: (1) to obtain and analyze relative comparative assessments of waste storage facilities and technologies regarding heterogeneous quality criteria, and (2) forming local and general decision-making strategies that provide sustainable development goals. The proposed approach appears promising for multiple prospective applications in the oil-bearing regions of the Russian Federation, where the growth in the formation of industrial waste has severe and irreversible environmental consequences.
- 1 December 2024
- Published by Allerton Press in Optoelectronics, Instrumentation and Data Processing
- Vol. 60 (6) , 792-802
Uniform Optimization of Systems with Distributed Parameters in Linear-Quadratic Control Problems with Amplitude Contraints of Controlling Actions
The paper proposes a constructive method for solving linear-quadratic problems of space-time control with amplitude constraints of controlling actions in s
- 1 December 2024
- Published by Allerton Press in Optoelectronics, Instrumentation and Data Processing
- Vol. 60 (6) , 792-802
Uniform Optimization of Systems with Distributed Parameters in Linear-Quadratic Control Problems with Amplitude Contraints of Controlling Actions
The paper proposes a constructive method for solving linear-quadratic problems of space-time control with amplitude constraints of controlling actions in s