Riccardo Sargeni
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Riccardo Sargeni has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Francesco Pieri
Dipartimento di Ingegneria dell'Informazione Università di Pisa Pisa Italy
5 shared publications - Elisabetta Dimaggio
Dipartimento di Ingegneria dell' Informazione Universitädi Pisa Pisa Italy
4 shared publications - Gianluca Fiori
Dipartimento di Ingegneria dell'Informazione Università di Pisa Pisa Italy
4 shared publications Gianluca Fiori
Institute of Electronics, Microelectronics and Nanotechnology, Villeneuve dAscq, France
3 shared publications- Federico Parenti
Dipartimento di Ingegneria dell’ Informazione, Università di Pisa, Pisa, Italy
2 shared publications - Filippo Fabbri
NEST Laboratory, Istituto Nanoscienze-CNR and Scuola Normale Superiore, Pisa, Italy
2 shared publications
Latest Publications
- Open Access
Inkjet‐Printed Physical Unclonable Functions For Secure Authentication
Counterfeiting is a growing global challenge with significant economic and social implications. Physical Unclonable Functions (PUFs), exploiting manufacturing randomness to generate unique and unclonable identifiers, have emerged as a promising solution for secure authentication. This study presents a novel, scalable method for fabricating inkjet‐printed PUFs by exploiting the randomness of ink droplet deposition on substrates such as paper. By optimizing geometric features, the proposed system ensures high uniqueness, reliability, and bit uniformity. The PUFs also exhibits excellent durability, maintaining performance under mechanical stress and chemical exposure. Furthermore, the system incorporates a low‐cost imaging setup and advanced positional markers, enabling fast and accurate database validation. This work establishes a robust and low‐cost route to PUFs that can be interrogated with consumer‐grade devices, making them suitable for various anticounterfeiting applications, including supply chain security and luxury goods authentication.
Open AccessInkjet‐Printed Physical Unclonable Functions For Secure Authentication
Counterfeiting is a growing global challenge with significant economic and social implications. Physical Unclonable Functions (PUFs), exploiting manufacturing randomness to generate unique and unclonable identifiers, have emerged as a promising solution for secure authentication. This study presents a novel, scalable method for fabricating inkjet‐printed PUFs by exploiting the randomness of ink droplet deposition on substrates such as paper. By optimizing geometric features, the proposed system ensures high uniqueness, reliability, and bit uniformity. The PUFs also exhibits excellent durability, maintaining performance under mechanical stress and chemical exposure. Furthermore, the system incorporates a low‐cost imaging setup and advanced positional markers, enabling fast and accurate database validation. This work establishes a robust and low‐cost route to PUFs that can be interrogated with consumer‐grade devices, making them suitable for various anticounterfeiting applications, including supply chain security and luxury goods authentication.
- 25 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Flexible Electronics
- Vol. 5 (5) , 161-166
Inkjet-Printing With Micrometer Resolution on Paper for Flexible RF Applications
Geometry is a critical factor in radio frequency design that directly affects the performance and efficiency of RF components and systems. The characteristic impedance and the propagation constant of transmission lines are affected by the conductor width, spacing and the dielectric properties. In addition, performance metrics such as insertion loss and bandwidth of microwave filters are also affected by the geometric configuration of resonant elements. This article explores the use of a non-commercial inkjet printer prototype to fabricate high-frequency devices with microscale precision, achieving high-resolution gaps, uniform spacing as small as 9 μm, conductor widths of 50 μm, and a filter that operate at frequencies up to 50 GHz. The chosen substrate is paper as a sustainable, environmentally friendly and flexible platform, that offers adaptability for RF applications in dynamic environments. The design, fabrication and measurements of coplanar waveguides (CPW) transmission lines and passband filter operating at a central frequency of 25 GHz are presented. The performance of the printed filters was studied with respect to the printing and annealing conditions, and it was compared to equivalent filter designs printed on PET substrate.
- 25 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Flexible Electronics
- Vol. 5 (5) , 161-166
Inkjet-Printing With Micrometer Resolution on Paper for Flexible RF Applications
Geometry is a critical factor in radio frequency design that directly affects the performance and efficiency of RF components and systems. The characteristic impedance and the propagation constant of transmission lines are affected by the conductor width, spacing and the dielectric properties. In addition, performance metrics such as insertion loss and bandwidth of microwave filters are also affected by the geometric configuration of resonant elements. This article explores the use of a non-commercial inkjet printer prototype to fabricate high-frequency devices with microscale precision, achieving high-resolution gaps, uniform spacing as small as 9 μm, conductor widths of 50 μm, and a filter that operate at frequencies up to 50 GHz. The chosen substrate is paper as a sustainable, environmentally friendly and flexible platform, that offers adaptability for RF applications in dynamic environments. The design, fabrication and measurements of coplanar waveguides (CPW) transmission lines and passband filter operating at a central frequency of 25 GHz are presented. The performance of the printed filters was studied with respect to the printing and annealing conditions, and it was compared to equivalent filter designs printed on PET substrate.
- Open Access
- 10 December 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (2) , 835-842
Fast prototyping of memristors for ReRAMs and neuromorphic computing
This work presents a scalable method to create Ag/MoS 2 /Au non-volatile memristors using roll-to-roll exfoliation and inkjet printing. Simulation shows that the weights of a Neural network can be stored in an array of the proposed devices.
- 10 December 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (2) , 835-842
Open AccessFast prototyping of memristors for ReRAMs and neuromorphic computing
This work presents a scalable method to create Ag/MoS 2 /Au non-volatile memristors using roll-to-roll exfoliation and inkjet printing. Simulation shows that the weights of a Neural network can be stored in an array of the proposed devices.
- Open Access
- 4 December 2025
- Published by IOP Publishing in Nano Futures
- Vol. 9 (4) , 045002
Evaluating capacitance modulation in conformable few-layer MoS 2 /organic metal–insulator–semiconductor structures
The growing field of conformable and bio-integrated electronics is enabling the development of innovative applications such as wearable sensors, electronic skin, and implantable devices. This evolution requires advanced materials and fabrication strategies capable of delivering electrical functionality without compromising mechanical compliance. In particular, understanding the electrical behavior of the metal–insulator–semiconductor (MIS) structure is fundamental, as it forms the gate stack in conformable transistors. Therefore, a detailed MIS electrical assessment is essential for the design and integration of reliable, flexible field-effect platforms and wearable electronic systems. Here, we present conformable MIS capacitors based on few-layer MoS 2 , inkjet-printed pedot:pss electrodes, and ultrathin bilayer poly(vinyl formal) (PVF) dielectrics on polyimide substrates, and we report their electrical behavior through capacitance–voltage ( C–V ) profiling and equivalent circuit modeling. To our knowledge, this is the first characterization of such a hybrid MIS structure by C–V measurements, providing direct insight into the dielectric and semiconductor contributions and validating the suitability of this technology for conformable electronics. Our results show a stable and reproducible capacitance modulation of about one order of magnitude under bias voltage changes at low frequencies ( ∼ 100 Hz ), with reliable operation for frequencies up 10 kHz , and robust performance within the investigated bending-induced strain range.
- 4 December 2025
- Published by IOP Publishing in Nano Futures
- Vol. 9 (4) , 045002
Open AccessEvaluating capacitance modulation in conformable few-layer MoS 2 /organic metal–insulator–semiconductor structures
The growing field of conformable and bio-integrated electronics is enabling the development of innovative applications such as wearable sensors, electronic skin, and implantable devices. This evolution requires advanced materials and fabrication strategies capable of delivering electrical functionality without compromising mechanical compliance. In particular, understanding the electrical behavior of the metal–insulator–semiconductor (MIS) structure is fundamental, as it forms the gate stack in conformable transistors. Therefore, a detailed MIS electrical assessment is essential for the design and integration of reliable, flexible field-effect platforms and wearable electronic systems. Here, we present conformable MIS capacitors based on few-layer MoS 2 , inkjet-printed pedot:pss electrodes, and ultrathin bilayer poly(vinyl formal) (PVF) dielectrics on polyimide substrates, and we report their electrical behavior through capacitance–voltage ( C–V ) profiling and equivalent circuit modeling. To our knowledge, this is the first characterization of such a hybrid MIS structure by C–V measurements, providing direct insight into the dielectric and semiconductor contributions and validating the suitability of this technology for conformable electronics. Our results show a stable and reproducible capacitance modulation of about one order of magnitude under bias voltage changes at low frequencies ( ∼ 100 Hz ), with reliable operation for frequencies up 10 kHz , and robust performance within the investigated bending-induced strain range.
- Open Access
- 4 November 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (49) , 15870-15877
Ultrathin Transistors and Circuits for Conformable Electronics
Adapting electronics to perfectly conform to nonplanar and rough surfaces, such as human skin, is a challenging task, which could open up new applications in fields of high economic and scientific interest, ranging from health to robotics, human-machine interface, and Internet of Things. The key to success lies in defining a technology that can lead to ultrathin devices, exploiting ultimately thin materials, with high mechanical flexibility and excellent electrical properties. Here, we report a hybrid approach for the development of high-performance, ultrathin and conformable electronic devices, based on the integration of semiconducting transition metal dichalcogenides, i.e., MoS2, with organic gate dielectric material, i.e., polyvinyl formal (PVF) combined with inkjet printed PEDOT:PSS electrodes. Through this novel approach, transistors and simple digital and analogue circuits are fabricated by a sequential stacking of ultrathin (nanometer) layers on a few micrometers thick polyimide substrate, which guarantees the high flexibility mandatory for the targeted applications.
- 4 November 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (49) , 15870-15877
Open AccessUltrathin Transistors and Circuits for Conformable Electronics
Adapting electronics to perfectly conform to nonplanar and rough surfaces, such as human skin, is a challenging task, which could open up new applications in fields of high economic and scientific interest, ranging from health to robotics, human-machine interface, and Internet of Things. The key to success lies in defining a technology that can lead to ultrathin devices, exploiting ultimately thin materials, with high mechanical flexibility and excellent electrical properties. Here, we report a hybrid approach for the development of high-performance, ultrathin and conformable electronic devices, based on the integration of semiconducting transition metal dichalcogenides, i.e., MoS2, with organic gate dielectric material, i.e., polyvinyl formal (PVF) combined with inkjet printed PEDOT:PSS electrodes. Through this novel approach, transistors and simple digital and analogue circuits are fabricated by a sequential stacking of ultrathin (nanometer) layers on a few micrometers thick polyimide substrate, which guarantees the high flexibility mandatory for the targeted applications.
- Open Access
- 22 July 2024
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (2)
High‐Precision Materials Printer for Fast Prototyping of Electronic Devices Based on 2D Materials
There is an increasing interest in printed electronics driven principally by flexible and wearable applications. The interest stems from the ability to fabricate electronic devices, such as Field Effect Transistors (FET), more efficiently in terms of materials use and cost‐effectively than traditional lithographic techniques. Challenges persist in achieving high resolution and accuracy in defining device geometry. In the study, a high‐resolution materials printer able to achieve resolutions in the micron range, surpassing the capabilities of commercially available printers is successfully designed and fabricated. The printer incorporates an all‐in‐one printing system, comprising Inkjet and a Dip Pen Nanolithography (DPN) technique, enabling both additive and subtractive manufacturing at the microscale. The experiments demonstrate the successful fabrication of FETs based on 2D materials (2DMs), with micrometric channel lengths exhibiting a high degree of controllability and repeatability, even when contacting limited channel regions as micrometer‐sized molybdenum disulfide (MoS 2 ) flakes. Electrical characterizations of the fabricated devices underscore the significant technological advancements achieved by the prototypes.
- 22 July 2024
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (2)
Open AccessHigh‐Precision Materials Printer for Fast Prototyping of Electronic Devices Based on 2D Materials
There is an increasing interest in printed electronics driven principally by flexible and wearable applications. The interest stems from the ability to fabricate electronic devices, such as Field Effect Transistors (FET), more efficiently in terms of materials use and cost‐effectively than traditional lithographic techniques. Challenges persist in achieving high resolution and accuracy in defining device geometry. In the study, a high‐resolution materials printer able to achieve resolutions in the micron range, surpassing the capabilities of commercially available printers is successfully designed and fabricated. The printer incorporates an all‐in‐one printing system, comprising Inkjet and a Dip Pen Nanolithography (DPN) technique, enabling both additive and subtractive manufacturing at the microscale. The experiments demonstrate the successful fabrication of FETs based on 2D materials (2DMs), with micrometric channel lengths exhibiting a high degree of controllability and repeatability, even when contacting limited channel regions as micrometer‐sized molybdenum disulfide (MoS 2 ) flakes. Electrical characterizations of the fabricated devices underscore the significant technological advancements achieved by the prototypes.
- Open Access
- 21 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Flexible Electronics
- Vol. 1 (3) , 153-158
Fully Printed and Flexible Schottky Diodes Based on Carbon Nanomaterials Operating Up to 5 MHz
The capability to fabricate printed and flexible energy harvesting and conditioning circuits, over large area and with low-cost techniques, is crucial to enable flexible and wearable electronics. Carbon nanomaterials show excellent electrical, optical, chemical, and mechanical properties for printed electronics, offering low-cost, and large-area functionality on flexible substrates. In the past few years many efforts have been dedicated to the fabrication of printed transistors made with carbon nanomaterials, but very few works have been dedicated to diodes, which are fundamental circuit elements, often employed in energy harvesting systems. Here we report a simple and cost-effective approach for the fabrication of fully inkjet printed Schottky diodes on Kapton and paper substrates using carbon nanotubes and graphene. We demonstrate that both ohmic and Schottky contacts between printed nanotubes and graphene can be obtained with post printing thermal treatments at different temperatures. The diodes thus fabricated work with low supply voltages, exhibit excellent mechanical stability and have a maximum operating frequency in the order of 5 MHz.
- 21 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Flexible Electronics
- Vol. 1 (3) , 153-158
Open AccessFully Printed and Flexible Schottky Diodes Based on Carbon Nanomaterials Operating Up to 5 MHz
The capability to fabricate printed and flexible energy harvesting and conditioning circuits, over large area and with low-cost techniques, is crucial to enable flexible and wearable electronics. Carbon nanomaterials show excellent electrical, optical, chemical, and mechanical properties for printed electronics, offering low-cost, and large-area functionality on flexible substrates. In the past few years many efforts have been dedicated to the fabrication of printed transistors made with carbon nanomaterials, but very few works have been dedicated to diodes, which are fundamental circuit elements, often employed in energy harvesting systems. Here we report a simple and cost-effective approach for the fabrication of fully inkjet printed Schottky diodes on Kapton and paper substrates using carbon nanotubes and graphene. We demonstrate that both ohmic and Schottky contacts between printed nanotubes and graphene can be obtained with post printing thermal treatments at different temperatures. The diodes thus fabricated work with low supply voltages, exhibit excellent mechanical stability and have a maximum operating frequency in the order of 5 MHz.