Raghuveer S. Makala
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Raghuveer S. Makala has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Joyeeta Nag
Non-Volatile Memory Research, Western Digital 2 , San Jose, California 95119
3 shared publications - Kartik Sondhi
Silicon Technology & Manufacturing, Western Digital 1 , Milpitas, California 95035
3 shared publications - Rahul Sharangpani
Silicon Technology & Manufacturing, Western Digital 1 , Milpitas, California 95035
3 shared publications - Senaka Kanakamedala
Silicon Technology & Manufacturing, Western Digital 1 , Milpitas, California 95035
3 shared publications - Michael Gribelyuk
Western Digital Inc. 2 , Great Oaks site, San Jose, California 95119
2 shared publications - Roshan J. Tirukkonda
Silicon Technology & Manufacturing, Western Digital 1 , Milpitas, California 95035
2 shared publications
Latest Publications
- Open Access
- 25 August 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 41 (5)
Extending area selective deposition of ruthenium onto 3D SiO2-Si multilayer stacks
Recent trends in semiconductor process engineering have resulted in significant adoption of new materials and processes to enable new paradigms in device manufacturing. One such emerging process is area selective deposition where a material can be selectively deposited on an area of interest. In this work, we have demonstrated selective deposition of ruthenium (Ru) on amorphous (a-Si) and polycrystallized silicon (p-Si) to silicon dioxide (SiO2) on both 2D blanket films as well as 3D annealed SiO2–Si multilayer stacks. Amorphous Si once crystallized using high temperature annealing exhibits reduced surface hydrogen content (–Si–H), yet we observed Ru growth on p-Si films that were annealed under multiple conditions (800, 900, and 1000 °C). We have used a combination of Fourier transform-infrared spectroscopy and x-ray photoelectron spectroscopy (XPS) to show that both –Si–H and film crystallinity impact the selective growth of Ru. We have also demonstrated selective deposition of ∼10 nm Ru on p-Si layers and ∼0 nm Ru on SiO2 layers of the annealed 3D SiO2–Si multilayer stack. Additionally, by using a combination of XPS and transmission electron microscopy, we have demonstrated that Ru growth is higher on nongrowth surfaces in 2D substrates than on 3D stacks. Finally, we have shown that this process technology can be further advanced using a combination of selective and nonselective conformal atomic layer deposition processes to develop a novel 3D annealed SiO2–Si multilayer stack, thereby demonstrating a 3D device with low –H content p-Si films. This study can help us to realize new integration schemes for innovative 3D device structures.
- 25 August 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 41 (5)
Open AccessExtending area selective deposition of ruthenium onto 3D SiO2-Si multilayer stacks
Recent trends in semiconductor process engineering have resulted in significant adoption of new materials and processes to enable new paradigms in device manufacturing. One such emerging process is area selective deposition where a material can be selectively deposited on an area of interest. In this work, we have demonstrated selective deposition of ruthenium (Ru) on amorphous (a-Si) and polycrystallized silicon (p-Si) to silicon dioxide (SiO2) on both 2D blanket films as well as 3D annealed SiO2–Si multilayer stacks. Amorphous Si once crystallized using high temperature annealing exhibits reduced surface hydrogen content (–Si–H), yet we observed Ru growth on p-Si films that were annealed under multiple conditions (800, 900, and 1000 °C). We have used a combination of Fourier transform-infrared spectroscopy and x-ray photoelectron spectroscopy (XPS) to show that both –Si–H and film crystallinity impact the selective growth of Ru. We have also demonstrated selective deposition of ∼10 nm Ru on p-Si layers and ∼0 nm Ru on SiO2 layers of the annealed 3D SiO2–Si multilayer stack. Additionally, by using a combination of XPS and transmission electron microscopy, we have demonstrated that Ru growth is higher on nongrowth surfaces in 2D substrates than on 3D stacks. Finally, we have shown that this process technology can be further advanced using a combination of selective and nonselective conformal atomic layer deposition processes to develop a novel 3D annealed SiO2–Si multilayer stack, thereby demonstrating a 3D device with low –H content p-Si films. This study can help us to realize new integration schemes for innovative 3D device structures.
- Open Access
- 8 June 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 41 (4)
Hardmask engineering by mask encapsulation for enabling next generation reactive ion etch scaling
Miniaturization and scaling of semiconductor devices require development of innovative techniques to sustain advancements. A promising trend is the migration from 2D to 3D device architectures that necessitate fabrication of high-aspect-ratio narrow features through layers of different materials. Reactive ion etching can achieve this but poses unique challenges due to the requirement of etch chemistries capable of etching dissimilar materials with varying etch rates while maintaining high productivity. The choice of hardmask is also crucial, as it plays a critical role in determining efficacy of the etch process and the final shape of the feature being etched. To address these challenges, we introduce a new concept of hardmask engineering that involves a bilayer hardmask scheme consisting of a patterned conventional hardmask encapsulated with a thin layer of etch-resistant ruthenium (Ru) layer. Experimental results for etching multilayer stacks consisting of alternating pairs of SiO2 and Mo show that this engineered hardmask results in improved hardmask remaining and etch profile with smaller critical dimensions (CDs). Technology computer-aided design simulations with the Ru encapsulation layer on conventional carbon hardmask demonstrate increased poly-Si etch depth with reduced bow CD. This concept can be extended to any semiconductor nanofabrication step involving high-aspect-ratio etching where precise control of CDs is essential in the vertical direction.
- 8 June 2023
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 41 (4)
Open AccessHardmask engineering by mask encapsulation for enabling next generation reactive ion etch scaling
Miniaturization and scaling of semiconductor devices require development of innovative techniques to sustain advancements. A promising trend is the migration from 2D to 3D device architectures that necessitate fabrication of high-aspect-ratio narrow features through layers of different materials. Reactive ion etching can achieve this but poses unique challenges due to the requirement of etch chemistries capable of etching dissimilar materials with varying etch rates while maintaining high productivity. The choice of hardmask is also crucial, as it plays a critical role in determining efficacy of the etch process and the final shape of the feature being etched. To address these challenges, we introduce a new concept of hardmask engineering that involves a bilayer hardmask scheme consisting of a patterned conventional hardmask encapsulated with a thin layer of etch-resistant ruthenium (Ru) layer. Experimental results for etching multilayer stacks consisting of alternating pairs of SiO2 and Mo show that this engineered hardmask results in improved hardmask remaining and etch profile with smaller critical dimensions (CDs). Technology computer-aided design simulations with the Ru encapsulation layer on conventional carbon hardmask demonstrate increased poly-Si etch depth with reduced bow CD. This concept can be extended to any semiconductor nanofabrication step involving high-aspect-ratio etching where precise control of CDs is essential in the vertical direction.
- 17 November 2022
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 40 (6) , 062412
Area selective deposition of ruthenium on 3D structures
Trends in device miniaturization have driven the adoption of new materials that, in turn, have enabled significant advancements in the field of process engineering and integration for semiconductor technology. Continued progress for device scaling is necessary and can be enabled by advances in lithographic techniques and deposition schemes. Thin-film deposition for spacers and etch stop layers has become a mainstay to enable and extend traditional 2D scaling into the 3D realm for fabricating advanced semiconductor devices. For processing 3D structures, controlled film deposition with subnanometer resolution in high aspect ratio features is desired. Area selective deposition (ASD) can be a powerful response to such a challenge. ASD is a type of thin-film deposition technique scheme that can be used to eliminate the need for several expensive and time-consuming lithography steps with fewer performance penalties. In this work, we show ASD of ruthenium (Ru) on 3D molybdenum (Mo)–silicon oxide (SiO2) stacks by utilizing the inherent substrate preference of the Ru precursor to a H-terminated surface. In the best selectivity condition, our results show growth of ∼5 nm Ru on Mo, with no film growth on SiO2. Changes in Ru growth kinetics were observed after dilute hydrofluoric acid (DHF) treatment for both surfaces. Post-DHF treatment, the Ru growth rate on Mo was reduced by 5%. However, on SiO2 (after incubation delay), the growth rate was reduced by 94% compared to untreated surfaces. This translates to a very high difference in the growth rate of Ru on Mo vs SiO2, even after considering the incubation delay. Finally, by using 3D topologies with high aspect ratio holes, we have highlighted that it is important to deconvolute the effects of precursor depletion and selectivity. To the best of our knowledge, this is the first demonstration of ASD of Ru on 3D structures without the use of any blocking layers. Therefore, these results demonstrate a new paradigm for ASD in 3D features.
- 17 November 2022
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 40 (6) , 062412
Area selective deposition of ruthenium on 3D structures
Trends in device miniaturization have driven the adoption of new materials that, in turn, have enabled significant advancements in the field of process engineering and integration for semiconductor technology. Continued progress for device scaling is necessary and can be enabled by advances in lithographic techniques and deposition schemes. Thin-film deposition for spacers and etch stop layers has become a mainstay to enable and extend traditional 2D scaling into the 3D realm for fabricating advanced semiconductor devices. For processing 3D structures, controlled film deposition with subnanometer resolution in high aspect ratio features is desired. Area selective deposition (ASD) can be a powerful response to such a challenge. ASD is a type of thin-film deposition technique scheme that can be used to eliminate the need for several expensive and time-consuming lithography steps with fewer performance penalties. In this work, we show ASD of ruthenium (Ru) on 3D molybdenum (Mo)–silicon oxide (SiO2) stacks by utilizing the inherent substrate preference of the Ru precursor to a H-terminated surface. In the best selectivity condition, our results show growth of ∼5 nm Ru on Mo, with no film growth on SiO2. Changes in Ru growth kinetics were observed after dilute hydrofluoric acid (DHF) treatment for both surfaces. Post-DHF treatment, the Ru growth rate on Mo was reduced by 5%. However, on SiO2 (after incubation delay), the growth rate was reduced by 94% compared to untreated surfaces. This translates to a very high difference in the growth rate of Ru on Mo vs SiO2, even after considering the incubation delay. Finally, by using 3D topologies with high aspect ratio holes, we have highlighted that it is important to deconvolute the effects of precursor depletion and selectivity. To the best of our knowledge, this is the first demonstration of ASD of Ru on 3D structures without the use of any blocking layers. Therefore, these results demonstrate a new paradigm for ASD in 3D features.