Xiao Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiao Li has a total of 77 co-authors. Here are the top co-authors by number of shared publications:
- Tie Wang
Tianjin University of Technology
6 shared publications Zhenjie Xue
Tianjin University of Technology
4 shared publicationsCancan Li
Tianjin University of Technology
3 shared publicationsJiaxing Liu
Tianjin University of Technology
3 shared publicationsLindong Ma
Tianjin University of Technology
3 shared publicationsDeyu Bao
Tianjin University of Technology
2 shared publications
Latest Publications
- 8 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (41) , 45125-45135
Nanoparticle Packing-Dependent Charge Transfer Dynamics in Colloidal Binary Superparticles
A key trend in nanoparticle self-assembly as “artificial atoms” is learning from molecular systems, yet progress lags behind molecular systems because current research primarily focuses on geometric structural mimicry while ignoring the electronic communication across arrangements intrinsic to molecules. Here, inspired by the characteristic topologies of molecular compounds, we introduce “packing-structure engineering” via a ligand solubility-matched microemulsion-confined co-assembly strategy to fabricate three typical mesoscopic packing-topology structural systems from Au nanoparticles and CdSe/CdS nanorods: metal-isolated-by-semiconductor-type, metal-interlaced-with-semiconductor-type, and semiconductor-isolated-by-metal-type. We demonstrate that packing topology acts as a fundamental independent order parameter─analogous to molecular connectivity topologies─fundamentally regulating intrinsic electron dynamics. Specifically, the metal-isolated-by-semiconductor configuration enables a transition from picosecond incoherent hot-electron transfer to instantaneous coherent plasmon-induced interfacial charge-transfer transition, comparable to contacting heterostructures. This behavior may arise from unique collective coupling modes and interparticle field enhancements. This offers a pathway for minimizing thermalization losses in the plasmonic donor. Extendable to diverse systems, it can unlock emergent optoelectronic properties and high-performance materials for applications in solar cells, photodetectors, photocatalysis, and sensing.
- 8 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (41) , 45125-45135
Nanoparticle Packing-Dependent Charge Transfer Dynamics in Colloidal Binary Superparticles
A key trend in nanoparticle self-assembly as “artificial atoms” is learning from molecular systems, yet progress lags behind molecular systems because current research primarily focuses on geometric structural mimicry while ignoring the electronic communication across arrangements intrinsic to molecules. Here, inspired by the characteristic topologies of molecular compounds, we introduce “packing-structure engineering” via a ligand solubility-matched microemulsion-confined co-assembly strategy to fabricate three typical mesoscopic packing-topology structural systems from Au nanoparticles and CdSe/CdS nanorods: metal-isolated-by-semiconductor-type, metal-interlaced-with-semiconductor-type, and semiconductor-isolated-by-metal-type. We demonstrate that packing topology acts as a fundamental independent order parameter─analogous to molecular connectivity topologies─fundamentally regulating intrinsic electron dynamics. Specifically, the metal-isolated-by-semiconductor configuration enables a transition from picosecond incoherent hot-electron transfer to instantaneous coherent plasmon-induced interfacial charge-transfer transition, comparable to contacting heterostructures. This behavior may arise from unique collective coupling modes and interparticle field enhancements. This offers a pathway for minimizing thermalization losses in the plasmonic donor. Extendable to diverse systems, it can unlock emergent optoelectronic properties and high-performance materials for applications in solar cells, photodetectors, photocatalysis, and sensing.
- 9 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (44) , 29796-29804
Simultaneously enhancing charge transport and analyte accessibility in poly(3-hexylthiophene) transistors via a highly π–π stacking nanowire network for ammonia sensing
Long-range ordered P3HT nanowire networks are fabricated via kinetic ternary modulation strategy, suppressing grain-boundary disorder through ordered π–π stacking for efficient OTFT charge transport in trace ammonia detection.
- 9 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (44) , 29796-29804
Simultaneously enhancing charge transport and analyte accessibility in poly(3-hexylthiophene) transistors via a highly π–π stacking nanowire network for ammonia sensing
Long-range ordered P3HT nanowire networks are fabricated via kinetic ternary modulation strategy, suppressing grain-boundary disorder through ordered π–π stacking for efficient OTFT charge transport in trace ammonia detection.
- 24 April 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (18) , 13631-13637
Visualization of Gas Mass Transfer by Interferometric Microsphere Microscopy
In situ observation of the gas mass transfer process is crucial for the development of high-performance sensing and catalytic materials. However, visualizing gas distribution patterns at the micro/nano interface remains challenging due to the weak optical signal of gas molecules as well as the trade-off between high resolution and a large field of view (FOV). To overcome these limitations, we developed label-free interferometric microsphere microscopy (IMM), achieving a resolution of 50 nm within an FOV of 100 μm2. A 45 μm microsphere was selected for the large-scale imaging. To improve the resolution within this large FOV, multiwavelength gas images were obtained by using frequency shift technology and fused using an algorithm. The structure-performance relationship of colorimetric gas sensors was established by analyzing the gas dynamics. The critical transition from laminar to vortical flow at micro/nano interfaces occurs at a Knudsen number (Kn) of 0.01, which depends on the size of the micropores. Laminar flow was observed at Kn = 0.008 and a micropore size of 6.3 μm. As the Kn value increased to 0.01, the micropore size corresponding to this value decreased to 4.5 μm, resulting in the formation of a vortex gas diffusion regime and improving the sensor response by 70%. The IMM shows great promise for real-time gas dynamics detection and is a powerful tool for determining the quantitative relationship between the structure and performance of functional materials.
- 24 April 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (18) , 13631-13637
Visualization of Gas Mass Transfer by Interferometric Microsphere Microscopy
In situ observation of the gas mass transfer process is crucial for the development of high-performance sensing and catalytic materials. However, visualizing gas distribution patterns at the micro/nano interface remains challenging due to the weak optical signal of gas molecules as well as the trade-off between high resolution and a large field of view (FOV). To overcome these limitations, we developed label-free interferometric microsphere microscopy (IMM), achieving a resolution of 50 nm within an FOV of 100 μm2. A 45 μm microsphere was selected for the large-scale imaging. To improve the resolution within this large FOV, multiwavelength gas images were obtained by using frequency shift technology and fused using an algorithm. The structure-performance relationship of colorimetric gas sensors was established by analyzing the gas dynamics. The critical transition from laminar to vortical flow at micro/nano interfaces occurs at a Knudsen number (Kn) of 0.01, which depends on the size of the micropores. Laminar flow was observed at Kn = 0.008 and a micropore size of 6.3 μm. As the Kn value increased to 0.01, the micropore size corresponding to this value decreased to 4.5 μm, resulting in the formation of a vortex gas diffusion regime and improving the sensor response by 70%. The IMM shows great promise for real-time gas dynamics detection and is a powerful tool for determining the quantitative relationship between the structure and performance of functional materials.
- 3 February 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (6) , 6390-6400
Multimodal Evaporation on Patterned Nanoparticle Arrays for Exhaled Breath Condensate Detection
Understanding droplet evaporation behavior is fundamental to a wide range of applications, including inkjet printing, microfluidics, thermal management, and biomedical sensing. Droplet evaporation typically follows a single stick-slip model on homogeneous solid substrates, while such evaporation behavior is far more complex and poorly understood because of the chemical and structural heterogeneity of substrates in practical settings. Here, we demonstrate that droplets on topographically and chemically heterogeneous substrates─engineered via patterned gold nanoparticle (AuNP) superlattice arrays─undergo multiple coexisting evaporation modes (modes 1-3), including mode 1, characterized by directional contraction toward the center of the AuNP superlattice domain; mode 2, marked by contraction away from the domain; and mode 3, featuring directional contraction with a trailing effect on the periphery. These distinct modes were demonstrated by surface-enhanced Raman scattering (SERS), exhibiting uniform analyte distributions in mode 1, which were applied in a proof-of-concept portable mask for exhaled breath condensate (EBC) collection and molecular monitoring. This mechanistic insight into multimodal droplet evaporation breaks from the classical single-model framework, offering a controllable strategy for tailoring evaporation-driven transport and localization on heterogeneous surfaces.
- 3 February 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (6) , 6390-6400
Multimodal Evaporation on Patterned Nanoparticle Arrays for Exhaled Breath Condensate Detection
Understanding droplet evaporation behavior is fundamental to a wide range of applications, including inkjet printing, microfluidics, thermal management, and biomedical sensing. Droplet evaporation typically follows a single stick-slip model on homogeneous solid substrates, while such evaporation behavior is far more complex and poorly understood because of the chemical and structural heterogeneity of substrates in practical settings. Here, we demonstrate that droplets on topographically and chemically heterogeneous substrates─engineered via patterned gold nanoparticle (AuNP) superlattice arrays─undergo multiple coexisting evaporation modes (modes 1-3), including mode 1, characterized by directional contraction toward the center of the AuNP superlattice domain; mode 2, marked by contraction away from the domain; and mode 3, featuring directional contraction with a trailing effect on the periphery. These distinct modes were demonstrated by surface-enhanced Raman scattering (SERS), exhibiting uniform analyte distributions in mode 1, which were applied in a proof-of-concept portable mask for exhaled breath condensate (EBC) collection and molecular monitoring. This mechanistic insight into multimodal droplet evaporation breaks from the classical single-model framework, offering a controllable strategy for tailoring evaporation-driven transport and localization on heterogeneous surfaces.
- Open Access
- 26 April 2025
- Published by Wiley in Advanced Science
- Vol. 12 (28) , e2501000
Pushing the Frontiers: Artificial Intelligence (AI)‐Guided Programmable Concepts in Binary Self‐Assembly of Colloidal Nanoparticles
Colloidal nanoparticle self‐assembly is a key area in nanomaterials science, renowned for its ability to design metamaterials with tailored functionalities through a bottom‐up approach. Over the past three decades, advancements in nanoparticle synthesis and assembly control methods have propelled the transition from single‐component to binary assemblies. While binary assembly has been recognized as a significant concept in materials design, its potential for intelligent and customized assembly has often been overlooked. It is argued that the future trend in the assembly of binary nanocrystalline superlattices (BNLSs) can be analogous to the ‘0s’ and ‘1s’ in computer programming, and customizing their assembly through precise control of these basic units could significantly expand their application scope. This review briefly recaps the developmental trajectory of nanoparticle assembly, tracing its evolution from simple single‐component assemblies to complex binary co‐assemblies and the unique property changes they induce. Of particular significance, this review explores the future prospects of binary co‐assembly, viewed through the lens of ‘AI‐guided programmable assembly’. Such an approach has the potential to shift the paradigm from passive assembly to active, intelligent design, leading to the creation of new materials with disruptive properties and functionalities and driving profound changes across multiple high‐tech fields.
- 26 April 2025
- Published by Wiley in Advanced Science
- Vol. 12 (28) , e2501000
Open AccessPushing the Frontiers: Artificial Intelligence (AI)‐Guided Programmable Concepts in Binary Self‐Assembly of Colloidal Nanoparticles
Colloidal nanoparticle self‐assembly is a key area in nanomaterials science, renowned for its ability to design metamaterials with tailored functionalities through a bottom‐up approach. Over the past three decades, advancements in nanoparticle synthesis and assembly control methods have propelled the transition from single‐component to binary assemblies. While binary assembly has been recognized as a significant concept in materials design, its potential for intelligent and customized assembly has often been overlooked. It is argued that the future trend in the assembly of binary nanocrystalline superlattices (BNLSs) can be analogous to the ‘0s’ and ‘1s’ in computer programming, and customizing their assembly through precise control of these basic units could significantly expand their application scope. This review briefly recaps the developmental trajectory of nanoparticle assembly, tracing its evolution from simple single‐component assemblies to complex binary co‐assemblies and the unique property changes they induce. Of particular significance, this review explores the future prospects of binary co‐assembly, viewed through the lens of ‘AI‐guided programmable assembly’. Such an approach has the potential to shift the paradigm from passive assembly to active, intelligent design, leading to the creation of new materials with disruptive properties and functionalities and driving profound changes across multiple high‐tech fields.
- 29 November 2022
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 18 (1) , e202201000
Progress in the Foaming of Polymer‐based Electromagnetic Interference Shielding Composites by Supercritical CO2
As a critical action plan formulated for peaking carbon dioxide emissions, polymeric electromagnetic interference (EMI) shielding materials based on CO2 foaming technology have recently been attracting widespread attention in both research and industry, attributable to their efficient use of CO2, high specific strength, corrosion resistance and low‐cost characteristics. In the past decade, the emergence of novel design concepts and preparation techniques for CO2 foaming technology has led to the development of new high‐performance EMI shielding materials in this field. This review summarizes the research progress made to date on the fabrication of EMI shielding composite foams by supercritical carbon dioxide (scCO2) foaming. We also explore the structure‐activity relationships between the component/distribution and EMI shielding properties. Additionally, the application prospects and development challenges of new EMI shielding composite foams are described.
- 29 November 2022
- Published by Wiley in Chemistry – An Asian Journal
- Vol. 18 (1) , e202201000
Progress in the Foaming of Polymer‐based Electromagnetic Interference Shielding Composites by Supercritical CO2
As a critical action plan formulated for peaking carbon dioxide emissions, polymeric electromagnetic interference (EMI) shielding materials based on CO2 foaming technology have recently been attracting widespread attention in both research and industry, attributable to their efficient use of CO2, high specific strength, corrosion resistance and low‐cost characteristics. In the past decade, the emergence of novel design concepts and preparation techniques for CO2 foaming technology has led to the development of new high‐performance EMI shielding materials in this field. This review summarizes the research progress made to date on the fabrication of EMI shielding composite foams by supercritical carbon dioxide (scCO2) foaming. We also explore the structure‐activity relationships between the component/distribution and EMI shielding properties. Additionally, the application prospects and development challenges of new EMI shielding composite foams are described.
- Open Access
- 11 November 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (45) , eadd1559
Printable assemblies of perovskite nanocubes on meter-scale panel
Hierarchical assemblies of functional nanoparticles can have applications exceeding those of individual constituents. Arranging components in a certain order, even at the atomic scale, can result in emergent effects. We demonstrate that printed atomic ordering is achieved in multiscale hierarchical structures, including nanoparticles, superlattices, and macroarrays. The CsPbBr 3 perovskite nanocubes self-assemble into superlattices in ordered arrays controlled across 10 scales. These structures behave as single nanoparticles, with diffraction patterns similar to those of single crystals. The assemblies repeat as two-dimensional planar unit cells, forming crystalline superlattice arrays. The fluorescence intensity of these arrays is 5.2 times higher than those of random aggregate arrays. The multiscale coherent states can be printed on a meter-scale panel as a micropixel light-producing layer of primary-color photon emitters. These hierarchical assemblies can boost the performance of optoelectronic devices and enable the development of high-efficiency, directional quantum light sources.
- 11 November 2022
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 8 (45) , eadd1559
Open AccessPrintable assemblies of perovskite nanocubes on meter-scale panel
Hierarchical assemblies of functional nanoparticles can have applications exceeding those of individual constituents. Arranging components in a certain order, even at the atomic scale, can result in emergent effects. We demonstrate that printed atomic ordering is achieved in multiscale hierarchical structures, including nanoparticles, superlattices, and macroarrays. The CsPbBr 3 perovskite nanocubes self-assemble into superlattices in ordered arrays controlled across 10 scales. These structures behave as single nanoparticles, with diffraction patterns similar to those of single crystals. The assemblies repeat as two-dimensional planar unit cells, forming crystalline superlattice arrays. The fluorescence intensity of these arrays is 5.2 times higher than those of random aggregate arrays. The multiscale coherent states can be printed on a meter-scale panel as a micropixel light-producing layer of primary-color photon emitters. These hierarchical assemblies can boost the performance of optoelectronic devices and enable the development of high-efficiency, directional quantum light sources.
- Open Access
- 21 November 2020
- Published by Tsinghua University Press in Friction
- Vol. 9 (6) , 1568-1579
Synergistic lubricating effect of graphene/ionic liquid composite material used as an additive
We prepared a graphene/ionic liquid (G/IL) composite material by the hybridization of G and an IL for use as a lubricating oil additive. The friction coefficient and wear volume of a base oil containing 0.04 wt% of the G/IL composite was reduced by 45% and 90%, respectively. Furthermore, the base oil containing the G/IL composite exhibited better lubricating properties than the base oil containing G, IL, or a mixture of IL and G at the same mass fraction. A synergistic lubrication mechanism was also revealed. The G/IL composite was adsorbed and deposited on the wear surface, forming a more ordered protective film and a unique tribochemical reaction film during rubbing. Therefore, the G/IL composite exhibited the synergistic lubricating effects of G and IL, which significantly improved the lubricating performance of the base oil. This study also suggested a way to limit the out-of-plane puckering of G at the macroscale.
- 21 November 2020
- Published by Tsinghua University Press in Friction
- Vol. 9 (6) , 1568-1579
Open AccessSynergistic lubricating effect of graphene/ionic liquid composite material used as an additive
We prepared a graphene/ionic liquid (G/IL) composite material by the hybridization of G and an IL for use as a lubricating oil additive. The friction coefficient and wear volume of a base oil containing 0.04 wt% of the G/IL composite was reduced by 45% and 90%, respectively. Furthermore, the base oil containing the G/IL composite exhibited better lubricating properties than the base oil containing G, IL, or a mixture of IL and G at the same mass fraction. A synergistic lubrication mechanism was also revealed. The G/IL composite was adsorbed and deposited on the wear surface, forming a more ordered protective film and a unique tribochemical reaction film during rubbing. Therefore, the G/IL composite exhibited the synergistic lubricating effects of G and IL, which significantly improved the lubricating performance of the base oil. This study also suggested a way to limit the out-of-plane puckering of G at the macroscale.
- 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 619-623
Research on the Suppression of Nano-coatings for the Surface Charge Accumulation on the GIS Basin Insulators under AC and DC voltage
The flashover phenomenon of insulator is the main cause for the insulating failure of GIS. One of the most critical factors that impacts the surface flashover voltage is the accumulation of surface charge which can even severely restrict the performance of insulators. Therefore, it is very necessary to find a way to restrain the accumulation of surface charge on the insulators. The common methods to restrain the surface charge accumulation on the insulators were reviewed in this paper. Through the reasonable comparison and analysis for those methods, the way of nano-coatings for insulators was selected to restrain the accumulation of surface charge on the basin insulators of GIS. The raw materials and formula of nano-coating materials were developed in this paper. The effective experiments were also carried out to test the suppression of nano-coatings for the surface charge accumulation on the GIS basin insulators. The experimental results indicated that, the nano-coatings can effectively restrain the accumulation of surface charge and improve the distribution of electric field on the insulator under DC and AC voltage, the maximum degree of the suppression for the surface charge under DC voltage can reach 51.2%, while under AC voltage it is 9.3%.
- 1 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 619-623
Research on the Suppression of Nano-coatings for the Surface Charge Accumulation on the GIS Basin Insulators under AC and DC voltage
The flashover phenomenon of insulator is the main cause for the insulating failure of GIS. One of the most critical factors that impacts the surface flashover voltage is the accumulation of surface charge which can even severely restrict the performance of insulators. Therefore, it is very necessary to find a way to restrain the accumulation of surface charge on the insulators. The common methods to restrain the surface charge accumulation on the insulators were reviewed in this paper. Through the reasonable comparison and analysis for those methods, the way of nano-coatings for insulators was selected to restrain the accumulation of surface charge on the basin insulators of GIS. The raw materials and formula of nano-coating materials were developed in this paper. The effective experiments were also carried out to test the suppression of nano-coatings for the surface charge accumulation on the GIS basin insulators. The experimental results indicated that, the nano-coatings can effectively restrain the accumulation of surface charge and improve the distribution of electric field on the insulator under DC and AC voltage, the maximum degree of the suppression for the surface charge under DC voltage can reach 51.2%, while under AC voltage it is 9.3%.