RFRafael Figueiredo

Rafael Figueiredo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rafael Figueiredo has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Robust Finite Control Set Using Sliding Mode Control for Induction Motor for Agricultural Electrical Traction

    by Rafael Moreno, Rafael Figueiredo, Igor Oliani, Lucas Demetrius Augusto, Yuri de Oliveira Cota, José A. Torrico Altuna, Alfeu J. Sguarezi Filho

    Electric vehicles for off-road agricultural applications utilize induction motors due to their low cost, simplicity, and efficiency of widely developed control methods, but with challenges in the presence of external factors such as roads with irregularities or internal factors like variations in motor parameters. Given the necessity for robust electric vehicles capable of operating reliably in agricultural environments this paper proposes a robust finite control set (FCS) with sliding mode control (SMC) with PI for predictive current control of induction motor and its application in agricultural electrical traction. The cost function sums the predicted voltages in the stator reference frame from the motor with the robust control voltages and compares them with the voltages of the converter to maintain the proposed system’s current reference. The proposed robust FCS-SMC will be compared to the classical finite control set and robust finite control set using the deadbeat approach. Considering that there are several more complex robust controls, our work focuses on the advantages that sliding mode offers, such as ease of implementation in addition to being a novelty in the literature of the use of sliding mode control with finite control set theory in stationary frame for current control. Experimental tests were developed to evaluate the proposed control, the results show the alpha current component within an adequate operating range, the parametric mismatch test with total harmonic distorsion under 4.1%, the mechanical speed test within acceptable values with low error and computational burden of 61% validates the proposed system.


  • Model Predictive Torque Control Analysis for Small Agricultural Machinery Traction

    by Rafael Figueiredo, Igor Oliani, Angelo Lunardi, Alfeu Joãozinho Sguarezi Filho


  • Open Access

    Heuristic Binary Search for Modulated Predictive Control

    by Rafael Figueiredo, Igor Oliani, Angelo Lunardi, Alfeu J. Sguarezi Filho

    Predictive Control optimization often relies on exhaustive enumeration of voltage vectors within the finite control set. Using Virtual Voltage Vector strategies tend to increase the number of predictions to enhance dynamic and steady state performance, leading to a higher computational burden. Modulated Model Predictive Control offers a solution by incorporating a modulation stage, but duty-cycle-based implementations can restrict the inclusion of constraints and nonlinearities in the cost function. This paper introduces the Heuristic Binary Search, an intelligent search algorithm that efficiently explores the solution space, accommodating arbitrary cost function constraints similar to Finite Control Set, while maintaining a fixed switching frequency. Applicable to various machine and inverter topologies, the proposed method is experimentally validated on a two-level voltage source inverter driving an induction motor using Predictive Torque Control and Deadbeat Robust Predictive Control. Experimental results comparing three variants of the Predictive Torque Control (one vector, three vector and modulated) show improvements in torque and flux ripple and improvements of current THD up to 30% over classic Modulated Predictive Torque Control implementation with reduced or similar computational cost. Results compared with the Finite Control Set Deadbeat Robust Predictive Control shows an improvement in THD of 40% with negligible impact in computational time.


  • Errata to “Robust Predictive Current Control Using Discrete-Time Integral Action for Induction Motors”

    by Igor Oliani, Rafael Figueiredo, Luís F. Normandia Lourenço, Ademir Pelizari, Alfeu J. Sguarezi Filho

    This erratum addresses errors found in the previously published paper titled "Robust Predictive Current Control Using Discrete-Time Integral Action for Induction Motors" in the IEEE Journal of Emerging and Selected Topics in Power Electronics, volume 11, issue 6, pages 5766-5773, December 2023. The errors are related to equations. The incorrect information could potentially lead to improper implementation. The corrected expressions are provided below, and all other conclusions and discussions from the original paper remain unchanged. We apologize for any confusion this may have caused and thank readers for their understanding.

  • Open Access

    Comparação dos Controles Preditivos Clássico e Robusto do tipo Finite Control Set para Motores de Indução

    by Igor Oliani, Gabriel Caramori, Rafael Figueiredo, Ademir Pelizari, Alfeu J. Sguarezi Filho

    A recente onda de eletrificação dos meios de transporte tem exigido a aplicação de máquinas elétricas com acionamentos mais sofisticados com rápida resposta dinâmica e robustez. Nesse contexto, os motores de indução (MI) ainda são uma boa solução, especialmente pela sua simplicidade construtiva. Entre as estratégias de controle mais recentes para essas máquinas, destaca-se o controle preditivo. Este artigo compara três métodos de controle preditivo de corrente: o Finite Control Set Clássico (PCC, do inglês Predictive Current Control), o Robusto Deadbeat (RPCC-Deadbeat) e o Robusto utilizando ação integral em tempo discreto (RPCC-DTIA). Estes controladores são promissores por sua resposta dinâmica rápida, flexibilidade e inclusão de não linearidades. Resultados obtidos em bancada experimental comparam o desempenho do PCC, RPCC-Deadbeat e RPCC-DTIA. As análises demonstram as diferenças entre as estratégias por meio de respostas dinâmicas e de regime, avaliando o comportamento dos controladores frente a variações de parâmetros da máquina, como resistência e indutância.


  • Open Access

    Informed Binary Search Optimization for Modulated Predictive Control

    by Rafael Figueiredo, Igor Oliani, Angelo Lunardi, Alfeu J Sguarezi Filho

    Predictive Control optimization typically relies on exhaustive enumeration of all possible voltage vectors within the finite control set. For simpler implementation the computational burden is not a concern, but the limited control set can demand a very high sampling frequency to reach good steady state performance. Indirect Predictive Control or Modulated Predictive Control addresses this by using a modulation stage, but classic implementation depends on duty cycle calculation that can limit constraints and non linearities in the cost function. This paper introduces the Informed Binary Search, an intelligent search algorithm capable of handling any constraints within the cost function, similarly to Finite Control Set, but with the benefit of fixed switching frequency. Experimental results on a two-level VSI driving an induction motor is shown but the method can be applied to every setup of machine and inverter. The results are compared with PTC, PTC with DSVM and MPTC and the metrics show improvements in torque and flux ripple and improvements of current THD up to 30% over classic M2PC while having similar computational burden.

  • Open Access

    Comparação de estratégias de controle preditivo e direto de torque para motores de indução

    by Rafael Figueiredo, Igor Oliani, Angelo S. Lunardi, Alfeu J. Sguarezi Filho, Daniel Albiero, Marcello Mezaroba

    As mudanças climáticas e a tendência de eletrificação causada pelo uso de energias renováveis incentiva a pesquisa em eletrificação de sistemas e direciona parte do interesse a tecnologias de acionamentos elétricos. Dentre os motores usados em acionamentos modernos, os motores de indução trifásicos mostram-se competitivos dado o seu baixo custo, elevada robustez e maturidade tecnológica. Este artigo explora métodos de controle direto de torque e fluxo, com destaque para controles preditivos, promissores por sua resposta dinâmica rápida e flexibilidade com não linearidades. São analisados resultados experimentais do DTC, PTC, PTC-DSVM e MPTC na mesma bancada. Os resultados demonstram por meio das respostas dinâmica, em regime e THD as diferenças entre estratégias e mostram que a frequência fixa do MPTC não se relaciona diretamente à melhor qualidade de energia no acionamento. O custo computacional também é medido para complemento das análises.


  • Robust Predictive Current Control Using Discrete-Time Integral Action for Induction Motors

    by Igor Oliani, Rafael Figueiredo, Luís F. Normandia Lourenço, Ademir Pelizari, Alfeu J. Sguarezi Filho

    Model predictive control (MPC) has gained attention in electric motor drives due to its dynamic performance, flexibility, and ease of implementation. This technique utilizes a mathematical model of the plant to predict its behavior and select the appropriate control signal. However, parameter mismatches and unmodeled dynamics can negatively affect the accuracy of the control performance. Researchers have proposed variations for the classic MPC structure in order to increase its robustness. This paper proposes a new robust predictive current control for induction motors using a discrete-time integral action. From the dynamic model of the machine, we develop a discrete-time predictive model for the stator voltage, including an integral term that improves the controller performance in the presence of parameter mismatches. The cost function in this study differs from typical MPC approaches by utilizing stator voltage vectors instead of current, torque, and magnetic flux. Experimental tests evaluate the performance of the proposed control method for stationary and dynamic behavior. The results demonstrate that the robustness of the proposed control is superior to classic predictive current control, presenting lower oscillations in situations of large variations in inductance and resistance values, validating it as a viable alternative solution.


  • Open Access

    Robust Finite Control Set Model Predictive Current Control for Induction Motor Using Deadbeat Approach in Stationary Frame

    by Thiago Baldim Dos Santos, Igor Oliani, Rafael Figueiredo, Daniel Albieiro, Ademir Pelizari, Alfeu J. Sguarezi Filho

    The model predictive control increased its prominence in the field of induction machine drives. However, the performance of this strategy depends on the accuracy of the machine model parameters. In order to overcome this deficiency, this paper proposes a robust model predictive current control employing indirect field-oriented control in stationary reference frame using the stator current and the rotor flux vectors as state and stator voltage vector as the input. The control algorithm combines the classical model predictive control with the deadbeat approach in order to calculate the applied stator voltage vector in two components: one element considers the stator current reference, and another employs the disturbances caused due to the parameter errors, which allows to compensate the parameter mismatches in the plant model. The minimized cost function employs the predicted stator voltage vector to select the voltage vector to be applied to the stator terminals of the motor. The control method performance was verified using an experimental test bench analyzing the system steady-state and dynamic actions. In this way, the results corroborate the proposed controller robustness against parametric variations.