JLJinshi Lin

Jinshi Lin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jinshi Lin has a total of 88 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Slope Effect of Soil Detachment Capacity on Steep Colluvial Deposits in Southern China

    by Qiaoqiao Yang, Yuanyuan Zhan, Liting Zhang, Ying Meng, Wei Wu, Yue Zhang, Jinshi Lin, Yanhe Huang, Fangshi Jiang

    Soil erosion is a major environmental issue affecting agricultural productivity and land conservation, and soil detachment capacity is a key parameter governing the erosion process. However, the mechanisms of soil detachment differ significantly across slope gradients, and the underlying causes remain to be further explored. In this study, scour experiments were conducted using small soil samples (0.1 m in diameter, 0.05 m in height) under eight slope gradients (9%, 18%, 27%, 36%, 47%, 58%, 70%, and 84%) and five unit discharges (0.56 × 10 −3 , 1.11 × 10 −3 , 1.67 × 10 −3 , 2.22 × 10 −3 , and 3.33 × 10 −3 m 2 s −1 ) to simulate rill flow detachment processes on colluvial deposits. The objectives were to systematically elucidate the influence of slope gradient on soil detachment capacity and to quantify the difference in slope contribution rates between gentle to moderate slopes (9%–36%) and steep slopes (47%–84%). The results show that soil detachment capacity increases with the slope gradient according to a power function, but the rate of increase in detachment capacity decreases as the slope steepens. Additionally, the contribution of slope gradient to soil detachment capacity is lower for steep slopes (47%–84%) (27.2%) than for gentle to moderate slopes (9%–36%) (43.2%). Furthermore, the representation of soil detachment capacity using basic indicators (flow velocity), mechanical indicators (flow shear stress), and energy indicators (stream power) exhibits slope‐dependent effects. The threshold slope for rill erodibility parameters ( k ) and critical hydraulic variables ( v c , τ c , ω c ) derived from linear fitting was approximately 47%. Similarly, the threshold slope for the coefficients ( a ) derived from the power‐law fitting between soil detachment capacity and hydrodynamic variables was also 47%, whereas the exponents ( b ) showed comparatively limited changes, with the stream power exponent ( b 3 ) remaining relatively stable across the tested slope range. Therefore, the slope‐dependent effects on soil detachment capacity suggest that results from gentle to moderate slopes cannot be directly applied to steep slopes. The slope‐dependent effects on soil detachment capacity confirm that results from gentle to moderate slopes cannot be directly applied to steep slopes. This study quantitatively reveals the variation rule that the contribution rate of slope to soil detachment decreases from 43.2% to 27.2%, clarifies the internal physical mechanism of the 47% slope as a hydrodynamic transition zone, and improves the theoretical understanding of soil detachment processes in steep colluvial deposits. It should be noted that this study is based on colluvial deposits derived from granite weathering crust in southern China (30% gravel, 2% clay), and the results are primarily applicable to steep slopes with similar coarse‐grained, low‐cohesion soils. Extrapolation to other soil types (e.g., loess, purple soil, cinnamon soil) or colluvial deposits at different erosion stages should be undertaken with caution and site‐specific validation.

  • Impact of the gravel content on rill erosion and soil losses on colluvial deposit slopes

    by Yuyang Chen, Zhenggang Zhang, Yiyang Zhou, Ying Men, Haidong Zhang, Xiang Zhang, Yue Zhang, Jinshi Lin, Yanhe Huang, Fangshi Jiang

  • Open Access

    Effects of Herbaceous–Shrub Vegetation Systems on Soil Shear Characteristics and Their Influencing Mechanisms in Eroded Red Soil Regions of Southern China

    by Qiaoqiao Yang, Fang Ha, Yuanyuan Zhan, Ying Meng, Yiyang Zhou, Xiang Zhang, Yue Zhang, Jinshi Lin, Yanhe Huang, Fangshi Jiang

    The shear characteristics of soil–root systems are dynamic indicators for assessing soil erosion resistance. Vegetation type influences shear characteristics by altering soil properties and root traits. However, the mechanisms by which mixed vegetation roots affect shear characteristics remain unclear. We selected naturally restored forestland (with Dicranopteris dichotoma, Baeckea frutescens, and their combinations) and artificially managed orchard systems (with Paspalum wettsteinii, Gardenia jasminoides, and their combinations) in the erosion-prone red soil region of southern China. In situ shear tests were conducted to explore the shear characteristics of soil–root systems under different vegetation types, identify the main influencing factors, and clarify the underlying mechanisms. Shear fracture energy (SFE), peak shear stress (PSS), and peak shear stress displacement (DPS) decreased with increasing soil depth across all sites. The average SFE and PSS in the forestland were 2.44 and 3.11 times higher, respectively, than those in the orchards. The main factors influencing shear characteristics in forestland included root volume density, tensile strength, bulk density, and mean weight diameter of aggregates (MWD), whereas those at the orchard sites included root length density, tensile strength, and organic matter content. Root factors had a stronger impact on shear fracture energy than soil properties. Shear fracture energy equations were constructed for forestland and orchard sites, showing high R2 and Nash–Sutcliffe efficiency values, indicating adequate predictive performance. These findings contribute to our understanding of the mechanical mechanisms of soils under vegetation restoration, provide scientific evidence for soil and water conservation evaluations, and help optimize vegetation restoration strategies in the Southern Red Soil Region.

  • Open Access

    Remote Sensing Identification of Benggang Using a Two-Stream Network with Multimodal Feature Enhancement and Sparse Attention

    by Xuli Rao, Qihao Chen, Kexin Zhu, Zhide Chen, Jinshi Lin, Yanhe Huang

    Benggang (Benggang), a typical landform characterized by severe erosion and a geohazard in the red-soil hilly regions of southern China, is characterized by a fragmented texture, irregular boundaries, and high similarity to background objects such as bare soil and roads, which poses a dual challenge of “multiscale variability + strong noise” for automated identification at regional scales. To address insufficient information from a single modality and the limited representation of cross-scale features, this study proposes a dual-stream feature-fusion network (DF-Net) for multisource data consisting of a digital orthophoto map (DOM) and a digital elevation model (DEM). The method adopts ResNeSt50d as the backbone of the two branches: on the DOM side, a Canny-edge channel is stacked to enhance high-frequency boundary information; on the DEM side, derived terrain factors, including slope, aspect, curvature, and hillshade, are introduced to provide morphological constraints. In the cross-modal fusion stage, a multiscale sparse attention fusion module is designed, which acquires contextual information via multiwindow average pooling and suppresses noise interference through top-K sparsification. In the decision stage, a multibranch ensemble is employed to improve classification stability. Taking Anxi County, Fujian Province, as the study area, a coregistered dataset of GF-2 (1 m) DOM and ALOS (12.5 m) DEMs is constructed, and a zonal partitioning strategy is adopted to evaluate the model’s generalization ability. The experimental results show that DF-Net achieves 97.44% accuracy, 85.71% recall, and an 82.98% F1 score in the independent test zone, outperforming multiple mainstream CNN/transformer classification models. This study indicates that the strategy of “multimodal feature enhancement + sparse attention fusion” tailored to Benggang erosional landforms can significantly improve recognition performance under complex backgrounds, providing technical support for rapid Benggang surveys and governance-effectiveness assessments.

  • Microbial Characteristics and Dominant Factors of Biocrusts on Steep Erosional Slopes in the Red Soil Hilly Region

    by Zumei Wang, Lu Yang, Linting Zhong, Qiaoqiao Yang, Maojin Yang, Fangshi Jiang, Yanhe Huang, Jinshi Lin, Yue Zhang

    Biocrusts play vital ecological roles on steep slopes in the red soil region, dominated by Ferralsols, yet their basic characteristics remain poorly understood. Here, we examined soil fertility, enzyme activities, and microbial characteristics of cyanobacterial and moss biocrusts on collapsing walls, using bare soil as a control. Our results demonstrated that moss biocrusts significantly outperformed both cyanobacterial biocrusts and bare soil. Phototrophic biomass (indicated by chlorophyll a content) was 7 times higher in moss biocrusts compared with bare soil, and the photosynthetic capacity was highest in moss biocrusts. Soil fertility and enzyme activities were also significantly higher in biocrusts, especially moss biocrusts, than in bare soil. Specifically, soil organic matter and total nitrogen were 3.4 and 6 times higher in moss biocrusts than in bare soil, respectively. Bacterial richness and diversity were significantly elevated in biocrusts, and the greatest increases were observed in moss biocrusts, with Chao 1 index being 2.8‐fold higher in moss biocrusts than in bare soil. Dominant microbial taxa varied significantly among treatments, and total phosphorus was identified as the key nutrient factor. These results enhance our understanding of the basic properties of biocrusts and the key factors affecting their properties on steep slopes in the red soil hilly region.

  • Open Access

    Comparison of Soil Detachment Characteristics Before and After Disturbance Due to Collapsing Wall Soil and Differences in the Underlying Mechanisms in Anxi County of Southeast China

    by Xiaofang Xie, Yuyang Chen, Tiancheng Li, Xinyi Lv, Xiaolin Li, Xiang Zhang, Yue Zhang, Jinshi Lin, Fangshi Jiang, Yanhe Huang

    To clarify the differences in and mechanisms of soil detachment before and after soil collapse, five typical granite soil layers (red soil, red soil–sandy soil, sandy soil, sandy soil–debris, and debris layers) of Benggang in Anxi County, Fujian Province, were studied via laboratory runoff scouring tests, and the detachment capabilities and influencing factors of undisturbed (original) and disturbed (colluvial deposit) soils were compared. The results showed that disturbance due to soil collapse significantly increases the soil detachment capacity by an average of 1046 times, with the greatest increase occurring in the red soil–sand soil layer (3494 times) and the smallest increase occurring in the debris layer (63 times). The undisturbed soil detachment capacity increases with increasing soil depth, whereas the disturbed soil capacity first increases but then decreases, with the sand layer having the highest capacity. Hydrodynamic fitting results revealed that undisturbed red soil has a linear relationship, red soil–sandy soil and sandy soil layers have power function relationships, and sandy soil–debris and debris layers have logarithmic relationships with flow shear stress. Disturbed red soil and red soil–sandy soil layers are linearly related, whereas the other layers are logarithmically related. Correlation analysis revealed that undisturbed soil detachment is significantly negatively correlated with clay, silt, gravel, free iron oxide, and free alumina contents and positively correlated with sand content. Disturbed soil shows similar correlations, but it has a negative correlation with organic matter instead of gravel. Structural equation modelling (SEM) path analysis revealed that undisturbed soil detachment is affected mainly by negative free alumina oxide content (path coefficient of −0.87) and flow shear stress (path coefficient of 0.14), whereas disturbed soil is controlled mainly by negative shear strength (path coefficient of −0.76) and positive flow shear stress (path coefficient of 0.49). This study elucidates the mechanism by which colluvial deposit disturbance accelerates soil detachment, providing a theoretical basis for the prevention and control of Benggang erosion in the hilly regions of southern China with red soil. Moreover, the comparative research strategy adopted in this study offers a reference for related investigations in similar erosion-prone areas.


  • Open Access

    Multiscale Two-Stream Fusion Network for Benggang Classification in Multi-Source Images

    by Xuli Rao, Chen Feng, Jinshi Lin, Zhide Chen, Xiang Ji, Yanhe Huang, Renguang Chen

    Benggangs, a type of soil erosion widely distributed in the hilly and mountainous regions of South China, pose significant challenges to land management and ecological conservation. Accurate identification and assessment of their location and scale are essential for effective Benggang control. With advancements in technology, deep learning has emerged as a critical tool for Benggang classification. However, selecting suitable feature extraction and fusion methods for multi-source image data remains a significant challenge. This study proposes a Benggang classification method based on multiscale features and a two-stream fusion network (MS-TSFN). Key features of targeted Benggang areas, such as slope, aspect, curvature, hill shade, and edge, were extracted from Digital Orthophotography Map (DOM) and Digital Surface Model (DSM) data collected by drones. The two-stream fusion network, with ResNeSt as the backbone, extracted multiscale features from multi-source images and an attention-based feature fusion block was developed to explore complementary associations among features and achieve deep fusion of information across data types. A decision fusion block was employed for global prediction to classify areas as Benggang or non-Benggang. Experimental comparisons of different data inputs and network models revealed that the proposed method outperformed current state-of-the-art approaches in extracting spatial features and textures of Benggangs. The best results were obtained using a combination of DOM data, Canny edge detection, and DSM features in multi-source images. Specifically, the proposed model achieved an accuracy of 92.76%, a precision of 85.00%, a recall of 77.27%, and an F1-score of 0.8059, demonstrating its adaptability and high identification accuracy under complex terrain conditions.


  • Impact of the root ratio of herbs and shrubs on the soil shear strength of collapsing walls in Benggang

    by Fang Shuai, Hua Wang, Fang Ha, Yuanyuan Zhan, Haoming Shen, Bo Ma, Yue Zhang, Jinshi Lin, Yanhe Huang, Fangshi Jiang


  • Open Access

    Control Effect of a Novel Polyurethane (W-OH) on Colluvial Deposit Slope Erosion in the Benggang Area of Southern China

    by Zhenggang Zhang, Yuyang Chen, Zhehao Zhu, Ying Meng, Wei Wu, Yiyang Zhou, Yue Zhang, Jinshi Lin, Yanhe Huang, Fangshi Jiang

    A novel polyurethane (W-OH), namely an eco-friendly hydrophilic polymer, has been widely applied in the field of soil erosion. However, recent research has not revealed the process and mechanisms through which W-OH application influences the soil detachment by concentrated overland flow (hereinafter referred to as soil detachment). In this study, the effects of the W-OH concentration on the physical and mechanical properties and the detachment capacity of colluvial deposit slope soil were investigated, and the impact of the relationship between the flow discharge and the W-OH concentration on the soil detachment capacity was examined under the experimental conditions. The results indicated that W-OH application significantly increased the large-particle content in the soil samples, enhanced the strength properties of the soil samples, reduced their separation capacity, and increased their stability. The structural equation modelling results revealed that W-OH application influences the soil detachment capacity primarily by affecting the shear strength, which exerts a significant negative effect on the detachment capacity (path coefficient = −0.57, p < 0.001). The soil detachment capacity prediction equation, which is based on the flow discharge and W-OH concentration, exhibited satisfactory accuracy (Nash–Sutcliffe efficiency (NSE) = 0.964) and can be used to predict the soil detachment capacity with high precision under similar experimental conditions. In addition, at a W-OH concentration above 1.53%, the impact on the soil detachment capacity is greater than that of the flow discharge. This study focused on investigating the process and mechanisms through which W-OH application reduces soil erosion on colluvial deposit slopes, thereby providing reference data for the management of Benggang erosion.


  • Open Access

    Influence of Gravel Coverage on Hydraulic Characteristics and Sediment Transport Capacity of Runoff on Steep Slopes

    by Haoming Shen, Zhehao Zhu, Yuyang Chen, Wei Wu, Shujun Sun, Yue Zhang, Jinshi Lin, Yanhe Huang, Fangshi Jiang

    Gravel coverage on slopes influences overland flow and soil erosion. However, the effect of different gravel sizes on the soil erosion process remains underexplored. In this study, a runoff scour test was performed to examine the effects of gravel coverage on the hydrodynamic characteristics of slope runoff and sediment transport capacity (Tc). The slope gradient varied from 18% to 84%, the unit flow discharge ranged from 0.27 × 10−3 to 1.11 × 10−3 m2 s−1, and gravel coverage was adjusted from 0% to 90%. The results reveal that water depth, shear stress, and stream power increased with gravel coverage. However, once coverage exceeded 20%, flow velocity and unit stream power decreased and stabilized. As gravel coverage increased, the hydraulic regimes transitioned from laminar to turbulent flow and shifted from supercritical to subcritical. Consequently, Tc first increased and then decreased with the increase in gravel coverage, reaching a peak at 20% coverage (1.66 kg m−1 s−1). Moreover, the degree of coverage indirectly influenced Tc through grain shear stress. The new equations, based on the Box–Lucas function, incorporated slope, grain shear stress, and flow velocity, thereby effectively simulating Tc for runoff on gravel-covered slopes (R2 = 0.94, NSE = 0.94). These findings provide a basis for modeling soil erosion on gravel-covered slopes.