YZYuchang Zhi

Yuchang Zhi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yuchang Zhi has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Analysis of the Internal Flow Field Characteristics of a Novel Cyclone Dust Removal Device

    by Jianpeng Han, Guodong Xiu, Yuchang Zhi

    This paper presents a novel cyclone dust removal device and conducts a preliminary investigation into its internal flow field characteristics. The device is equipped with an impeller with Archimedean spiral characteristics and a whip sheath structure arranged in a circle. Using the computational fluid dynamics (CFD) method, the velocity field, pressure field, vortex structure, and fluid trajectory characteristics are studied under the condition of a fixed rotational speed and different inlet velocities. The simulation results demonstrate that, under a fixed rotational speed of 24.5 rps and TSR = 2.0, the downstream vortex system of the impeller is more coherent and structured, developing into a stable configuration with alternating positive and negative vorticity. When the whip sheath structure is added, a larger radial velocity is generated. This study reveals the unique internal flow field evolution law of the device, which provides a theoretical basis for subsequent particle separation research.

  • Effect of yaw angle on natural ventilated flow around a T-foil

    by Zhijian Xiao, Xingyu Lu, Miao Huang, Renfang Huang, Tezhuan Du, Yongjiu Wang, Yuchang Zhi, Jingzhu Wang, Yiwei Wang


  • Numerical investigation on the ventilation formation of a surface-piercing hydrofoil with a fence

    by Tezhuan Du, Yuan Lu, Yongjiu Wang, Zhijian Xiao, Yuchang Zhi, Yiwei Wang

  • Numerical study of the behaviors of ventilated supercavity under the heave motion

    by Yuchang Zhi, Zhijian Xiao, Yongjiu Wang, Rundi Qiu, Lianzhou Wang

    In the operational environment of underwater vehicles, the heave motion directly influences the ventilated supercavity flow field. However, the impact mechanism of the ventilated supercavity characteristics has not been fully revealed. Therefore, this study focuses on the transient evolution characteristics of the ventilated supercavity under the heave motion of the cavitator, aiming to fill the gap in this area of research. The numerical simulations employ the volume of fluid method to capture the gas–liquid interface, coupled with a k–ε turbulence model to describe turbulent flow characteristics. The periodic heave motion conditions of the cavitator are constructed by superimposing cosine functions and using an overlapping grid technique. After the model's validity is verified against experimental data, a series of numerical simulations is conducted at heave frequencies of 10, 5, and 2.5 Hz. The results indicate that the heave motion of the cavitator significantly alters the geometry of the ventilated supercavity, causing its surface curvature to change in a regular pattern and exhibit a wave-like distribution. Under fixed heave displacement conditions, an increase in heave frequency further intensifies the wave-like fluctuation of the cavity, and the curvature along the centerline significantly increases. Mechanism analysis shows that the heave motion of the cavitator alters the vertical velocity distribution near the cavity surfaces, leading to changes in the curvature of the upper and lower surfaces of the cavity, thus inducing dynamic evolution of its overall geometry. These findings provide key theoretical support and technical reference for the structural optimization and active control of ventilated supercavities.

  • Modulation mechanisms of swept angle on the ventilated flows around surface-piercing hydrofoils

    by Zhijian Xiao, Jie Wang, Renfang Huang, Yiwei Wang, Yuchang Zhi, Jian Huang, Jingzhu Wang

    This study systematically investigates the natural ventilation characteristics around surface-piercing hydrofoils using an integrated experimental and numerical methodology, focusing on the modulation mechanisms of the sweep angle (Λ). A comprehensive flow-regime classification is developed for moderate-to-high depth-based Froude numbers (Frh), and three distinct states are identified: tip-vortex-induced ventilation (TVIV), fully wetted flow (FW), and nose ventilation (NV). The stability domains and transition thresholds are quantitatively mapped within the Λ-Frh parameter space. The critical findings demonstrate that the TVIV-to-FW transition is governed by spanwise secondary flow-induced nonlinear vortex interactions. Multiscale vortex fusion drives the intermittent breakdown of secondary tip vortices, forming a tip-locking phenomenon that suppresses TVIV development. This is quantitatively validated through analysis of the circulation distribution and spectral coherence characteristics. Synergistic interactions between attenuated leading-edge adverse pressure gradients and the failure of free-surface sealing trigger the FW-to-NV transition, accompanied by the disappearance of the choking effect. Significantly, the stable FW regime delivers superior hydrodynamic performance across a broad velocity range at moderate values of Λ. Temporal evolution analysis indicates that TVIV takes an order of magnitude longer than NV at identical Frh with both timescales being inversely proportional to Frh. These findings provide critical insights for anti-ventilation design in high-performance marine applications.


  • Open Access

    Numerical investigation of the tip-vortex-induced ventilation formation mechanism for a surface-piercing hydrofoil

    by Yuchang Zhi, Renfang Huang, Rundi Qiu, Yiwei Wang, Qun Sun, Shuting Cai

    Recent experiments have demonstrated that tip vortices can trigger the ventilation formation around a surface-piercing hydrofoil. However, the influence of this ventilation on transient flow structures and vortex evolution remains unresolved. This paper numerically investigates the tip-vortex-induced ventilation formation for a surface-piercing hydrofoil at a stalled yaw angle. The predicted unsteady ventilated cavities with tip vortices and pressure-side spray are in reasonable agreement with experimental observations. The ventilation formation process can be divided into three stages: base ventilation, tip-vortex ventilation, and suction-side ventilation. It is indicated that ventilation has a greater impact on the lift coefficient than the drag coefficient. The lift coefficient increases during the base ventilation and tip-vortex ventilation stages due to the expansion of the low-pressure stalled flow, but decreases in the suction-side ventilation stage because of the gradual replacement of this low-pressure region by an aerated cavity. Tip-leakage and tip-separation vortices initially exist independently at the hydrofoil tip, then expand and merge through air ventilation, ultimately forming a strongly stable tip vortex. Furthermore, ventilation promotes vortex generation, with the major contributors being the vortex stretching and baroclinic torque terms.


  • Open Access

    Numerical Investigation on the Ventilated Supercavity around a Body under Free Surface Effect

    by Yuchang Zhi, Jiemin Zhan, Renfang Huang, Yiwei Wang, Ning Li

    Reducing vessel resistance by using ventilated cavities has been a highly researched topic in the marine industry. There is limited literature on ventilated supercavities near the free surface, which indicates that their dynamic behavior is more complex than conventional ventilated cavities due to the effect of the free surface. This paper employs numerical simulations to study the dynamic behavior of the ventilated supercavity, taking into account the effect of the free surface. Numerical simulations can predict gas leakage behaviors, cavity geometry, and internal flow structures. The influence of the free surface shortens the length of the ventilated cavity and increases the diameter. The presence of the free surface mainly changes the vertical velocity distribution between the free surface and the cavity. The results show that there are two typical gas leakage mechanisms under different immersion depths: twin-vortex tube leakage mode and re-entrant jet leakage mode. The internal flow field of ventilated supercavity is classified into three regions: the internal boundary layer, the ventilation influence region, and the reverse flow region. As the distance between the free surface and the ventilated supercavity decreases, the ventilated supercavity is affected by both the free surface effect and the gravity effect.