Michael Haugeneder
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Michael Haugeneder has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Michael Lehning
Laboratory of Cryospheric Sciences, Environmental Engineering Institute, École Polytechnique Fédérale de Lausanne, 1950 Sion, Switzerland
8 shared publications Rebecca Mott
7 shared publications- Dylan Reynolds
WSL Institute for Snow and Avalanche Research SLF, Davos, Switzerland
6 shared publications - Ethan D. Gutmann
National Center for Atmospheric Research, Boulder, CO, USA
4 shared publications Tobias Jonas
Institute for Snow and Avalanche Research SLF, Davos, Switzerland
3 shared publications- Bert Kruyt
Research Applications Laboratory, National Center for Atmospheric Research, Boulder, Colorado
2 shared publications
Latest Publications
- Open Access
- 29 October 2026
- Published by Copernicus GmbH
Supplementary material to "Contrasting Effects of Leads, Melt Ponds, and Pressure Ridges on Turbulent Exchange over Summer Arctic Sea Ice"
- 29 October 2026
- Published by Copernicus GmbH
Open AccessSupplementary material to "Contrasting Effects of Leads, Melt Ponds, and Pressure Ridges on Turbulent Exchange over Summer Arctic Sea Ice"
- Open Access
- 29 October 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-31
Contrasting Effects of Leads, Melt Ponds, and Pressure Ridges on Turbulent Exchange over Summer Arctic Sea Ice
Summer Arctic sea ice forms a heterogeneous mosaic of melting ice, melt ponds, leads, and pressure ridges whose thermodynamic and aerodynamic contrasts can modify surface–atmosphere exchange. Direct observations quantifying these effects during the melt season remain scarce, limiting evaluation of how sea-ice heterogeneity should be represented in larger-scale models. During the CONTRASTS expedition in summer 2025, we performed eddy-covariance measurements at approximately 1m and 2m height on two mobile towers, complemented by spatially resolved near-surface air-temperature measurements, to compare atmospheric turbulent exchange across leads, melt ponds, pressure ridges, and the adjacent sea ice. Median sensible and latent heat fluxes were close to zero W m-2, although individual periods reached several tens of W m-2 in both directions. The near-surface atmospheric stability was mainly neutral, with modifications towards slightly stable (unstable) related to a warmer (colder) background air-mass temperature. Total turbulent flux variability reached about one third of the variability of simultaneously measured net radiation fluxes. At lead-ice transitions, a larger lead contribution to the flux footprint was associated with more negative sensible heat fluxes, because the saline lead water remained about 1.7°C colder than surrounding melting ice. In contrast, no systematic pond--ice flux difference was detected, consistent with both surfaces remaining near 0°C and without a detectable difference in moisture availability. Pressure-ridge wakes disrupted the vertical coherence of heat and momentum fluxes, with the strongest disturbances for near-perpendicular flow across the ridge. Because the mean turbulent heat exchange between the surface and the air was close to zero, even modest surface-induced perturbations could reverse its sign and thereby alter the turbulent contribution to the surface energy balance. Under the sampled summer conditions, aerodynamic perturbations associated with pressure ridges produced stronger local modifications of turbulent exchange than the comparatively weak thermodynamic differences between the sampled surface types. The thermodynamic influence of leads, however, depends critically on water temperature: the near-freezing saline leads observed during CONTRASTS acted as a local heat sink, whereas warmer leads as observed in other campaigns reverse the surface–air temperature difference and therefore the direction of turbulent heat exchange. These observations show that summer sea-ice heterogeneity cannot be characterized by surface morphology alone: the atmospheric response depends on the actual thermodynamic difference and dynamically induced flow distortion, and that footprint-resolved measurements are essential for quantifying and parameterizing turbulent exchange over heterogeneous sea ice.
- 29 October 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-31
Open AccessContrasting Effects of Leads, Melt Ponds, and Pressure Ridges on Turbulent Exchange over Summer Arctic Sea Ice
Summer Arctic sea ice forms a heterogeneous mosaic of melting ice, melt ponds, leads, and pressure ridges whose thermodynamic and aerodynamic contrasts can modify surface–atmosphere exchange. Direct observations quantifying these effects during the melt season remain scarce, limiting evaluation of how sea-ice heterogeneity should be represented in larger-scale models. During the CONTRASTS expedition in summer 2025, we performed eddy-covariance measurements at approximately 1m and 2m height on two mobile towers, complemented by spatially resolved near-surface air-temperature measurements, to compare atmospheric turbulent exchange across leads, melt ponds, pressure ridges, and the adjacent sea ice. Median sensible and latent heat fluxes were close to zero W m-2, although individual periods reached several tens of W m-2 in both directions. The near-surface atmospheric stability was mainly neutral, with modifications towards slightly stable (unstable) related to a warmer (colder) background air-mass temperature. Total turbulent flux variability reached about one third of the variability of simultaneously measured net radiation fluxes. At lead-ice transitions, a larger lead contribution to the flux footprint was associated with more negative sensible heat fluxes, because the saline lead water remained about 1.7°C colder than surrounding melting ice. In contrast, no systematic pond--ice flux difference was detected, consistent with both surfaces remaining near 0°C and without a detectable difference in moisture availability. Pressure-ridge wakes disrupted the vertical coherence of heat and momentum fluxes, with the strongest disturbances for near-perpendicular flow across the ridge. Because the mean turbulent heat exchange between the surface and the air was close to zero, even modest surface-induced perturbations could reverse its sign and thereby alter the turbulent contribution to the surface energy balance. Under the sampled summer conditions, aerodynamic perturbations associated with pressure ridges produced stronger local modifications of turbulent exchange than the comparatively weak thermodynamic differences between the sampled surface types. The thermodynamic influence of leads, however, depends critically on water temperature: the near-freezing saline leads observed during CONTRASTS acted as a local heat sink, whereas warmer leads as observed in other campaigns reverse the surface–air temperature difference and therefore the direction of turbulent heat exchange. These observations show that summer sea-ice heterogeneity cannot be characterized by surface morphology alone: the atmospheric response depends on the actual thermodynamic difference and dynamically induced flow distortion, and that footprint-resolved measurements are essential for quantifying and parameterizing turbulent exchange over heterogeneous sea ice.
- Open Access
- 18 May 2026
- Published by Copernicus GmbH
Supplementary material to "Horizontal sensible heat advection increases snow melt rates: Beyond point measurements"
- 18 May 2026
- Published by Copernicus GmbH
Open AccessSupplementary material to "Horizontal sensible heat advection increases snow melt rates: Beyond point measurements"
- Open Access
- 18 May 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-30
Horizontal sensible heat advection increases snow melt rates: Beyond point measurements
In the atmospheric surface layer, it is generally assumed that vertical fluxes dominate near-surface heat transport and heat exchange between the atmosphere and the earth's surface. However, when the earth's surface is covered in patchy snow, near-surface horizontal advection of heat may be significant, and it's impact on snow melt rates is disputed. We estimated the contribution of horizontal sensible heat advection (QH) to snow melt using 8 days of measurements collected in May 2023 in the alpine East River basin in Colorado, Rocky Mountains, USA. We used an infrared video camera and polyester sheet to estimate QH, 3-meter resolution satellite imagery to track fractional snow covered area (fSCA), a scanning lidar to estimate snow melt rates, and micrometeorological and eddy covariance measurements to characterize the surface energy balance. Infrared camera measurements of QH over a single snow patch show that QH contributes to snow melt and is largest at the patch's upwind edge. Lidar-based snow melt measurements show that melt rates are highest at the upwind edge, further suggesting that QH causes snow melt. Over four days when fSCA was less than 62%, QH estimates ranged from 234–584 W m-2 and mid-day net radiation ranged from 331–508 W m-2. When we considered only vertical heat fluxes, radiative fluxes, and snow melt in a snow patch surface energy balance equation, we found a mid-day residual between 267–668 W m-2, and the residual increased as fSCA decreased. The approximate match between the energy balance residual and estimated QH suggests that advection is an important factor to consider when predicting snow melt. On days with low fSCA (< 62%), horizontal advection may contribute as much to snow melt as net radiation.
- 18 May 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-30
Open AccessHorizontal sensible heat advection increases snow melt rates: Beyond point measurements
In the atmospheric surface layer, it is generally assumed that vertical fluxes dominate near-surface heat transport and heat exchange between the atmosphere and the earth's surface. However, when the earth's surface is covered in patchy snow, near-surface horizontal advection of heat may be significant, and it's impact on snow melt rates is disputed. We estimated the contribution of horizontal sensible heat advection (QH) to snow melt using 8 days of measurements collected in May 2023 in the alpine East River basin in Colorado, Rocky Mountains, USA. We used an infrared video camera and polyester sheet to estimate QH, 3-meter resolution satellite imagery to track fractional snow covered area (fSCA), a scanning lidar to estimate snow melt rates, and micrometeorological and eddy covariance measurements to characterize the surface energy balance. Infrared camera measurements of QH over a single snow patch show that QH contributes to snow melt and is largest at the patch's upwind edge. Lidar-based snow melt measurements show that melt rates are highest at the upwind edge, further suggesting that QH causes snow melt. Over four days when fSCA was less than 62%, QH estimates ranged from 234–584 W m-2 and mid-day net radiation ranged from 331–508 W m-2. When we considered only vertical heat fluxes, radiative fluxes, and snow melt in a snow patch surface energy balance equation, we found a mid-day residual between 267–668 W m-2, and the residual increased as fSCA decreased. The approximate match between the energy balance residual and estimated QH suggests that advection is an important factor to consider when predicting snow melt. On days with low fSCA (< 62%), horizontal advection may contribute as much to snow melt as net radiation.
- Open Access
- 29 October 2024
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 12, 1415327
Large eddy simulation of near-surface boundary layer dynamics over patchy snow
The near-surface boundary layer over patchy snow is highly heterogeneous and dynamic. Layers of opposing stability coexist within only a few horizontal meters. Conventional experimental methods to investigate this layer suffer from limitations related to the fixed positions of eddy covariance sensors. To overcome these difficulties, we set up a centimeter-resolution large eddy simulation of flow across an idealised transition from bare ground to snow. We force the simulation with high-frequency eddy covariance data recorded during a field campaign. We show that the model can represent the real flow by comparing it to independent eddy covariance data. However, the simulation underestimates vertical wind speed fluctuations, especially at high frequencies. Sensitivity analyses show that this is influenced by grid resolution and surface roughness representation but not much by subgrid-scale parameterization. Nevertheless, the model can reproduce the experimentally observed plumes of warm air intermittently detaching from bare ground and being advected over snow. This process is highly dynamic, with time scales of only a few seconds. We can show that the growth of a stable internal boundary layer adjacent to the snow surface can be approximated by a power law. With low wind speeds, deeper stable layers develop, while strong wind speeds limit the growth. Even close to the surface, the buoyancy fluxes are heterogeneous and driven by terrain variations, which also induce the frequent decoupling of a thin layer adjacent to the snow surface. Our simulations point the path towards generalizing point-based and aerial measurements to three dimensions.
- 29 October 2024
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 12, 1415327
Open AccessLarge eddy simulation of near-surface boundary layer dynamics over patchy snow
The near-surface boundary layer over patchy snow is highly heterogeneous and dynamic. Layers of opposing stability coexist within only a few horizontal meters. Conventional experimental methods to investigate this layer suffer from limitations related to the fixed positions of eddy covariance sensors. To overcome these difficulties, we set up a centimeter-resolution large eddy simulation of flow across an idealised transition from bare ground to snow. We force the simulation with high-frequency eddy covariance data recorded during a field campaign. We show that the model can represent the real flow by comparing it to independent eddy covariance data. However, the simulation underestimates vertical wind speed fluctuations, especially at high frequencies. Sensitivity analyses show that this is influenced by grid resolution and surface roughness representation but not much by subgrid-scale parameterization. Nevertheless, the model can reproduce the experimentally observed plumes of warm air intermittently detaching from bare ground and being advected over snow. This process is highly dynamic, with time scales of only a few seconds. We can show that the growth of a stable internal boundary layer adjacent to the snow surface can be approximated by a power law. With low wind speeds, deeper stable layers develop, while strong wind speeds limit the growth. Even close to the surface, the buoyancy fluxes are heterogeneous and driven by terrain variations, which also induce the frequent decoupling of a thin layer adjacent to the snow surface. Our simulations point the path towards generalizing point-based and aerial measurements to three dimensions.
- Open Access
- 4 May 2024
- Published by Springer Nature in Boundary-Layer Meteorology
- Vol. 190 (5) , 1-22
Using the Sensible Heat Flux Eddy Covariance-Based Exchange Coefficient to Calculate Latent Heat Flux from Moisture Mean Gradients Over Snow
In absence of the high-frequency measurements of wind components, sonic temperature and water vapour required by the eddy covariance (EC) method, Monin–Obukhov similarity theory (MOST) is often used to calculate heat fluxes. However, MOST requires assumptions of stability corrections and roughness lengths. In most environments and weather situations, roughness length and stability corrections have high uncertainty. Here, we revisit the modified Bowen-ratio method, which we call C-method, to calculate the latent heat flux over snow. In the absence of high-frequency water vapour measurements, we use sonic anemometer data, which have become much more standard. This method uses the exchange coefficient for sensible heat flux to estimate latent-heat flux. Theory predicts the two exchange coefficients to be equal and the method avoids assuming roughness lengths and stability corrections. We apply this method to two datasets from high mountain (Alps) and polar (Antarctica) environments and compare it with MOST and the three-layer model (3LM). We show that roughness length has a great impact on heat fluxes calculated using MOST and that different calculation methods over snow lead to very different results. Instead, the 3LM leads to good results, in part due to the fact that it avoids roughness length assumptions to calculate heat fluxes. The C-method presented performs overall better or comparable to established MOST with different stability corrections and provides results comparable to the direct EC method. An application of this method is provided for a new station installed in the Pamir mountains.
- 4 May 2024
- Published by Springer Nature in Boundary-Layer Meteorology
- Vol. 190 (5) , 1-22
Open AccessUsing the Sensible Heat Flux Eddy Covariance-Based Exchange Coefficient to Calculate Latent Heat Flux from Moisture Mean Gradients Over Snow
In absence of the high-frequency measurements of wind components, sonic temperature and water vapour required by the eddy covariance (EC) method, Monin–Obukhov similarity theory (MOST) is often used to calculate heat fluxes. However, MOST requires assumptions of stability corrections and roughness lengths. In most environments and weather situations, roughness length and stability corrections have high uncertainty. Here, we revisit the modified Bowen-ratio method, which we call C-method, to calculate the latent heat flux over snow. In the absence of high-frequency water vapour measurements, we use sonic anemometer data, which have become much more standard. This method uses the exchange coefficient for sensible heat flux to estimate latent-heat flux. Theory predicts the two exchange coefficients to be equal and the method avoids assuming roughness lengths and stability corrections. We apply this method to two datasets from high mountain (Alps) and polar (Antarctica) environments and compare it with MOST and the three-layer model (3LM). We show that roughness length has a great impact on heat fluxes calculated using MOST and that different calculation methods over snow lead to very different results. Instead, the 3LM leads to good results, in part due to the fact that it avoids roughness length assumptions to calculate heat fluxes. The C-method presented performs overall better or comparable to established MOST with different stability corrections and provides results comparable to the direct EC method. An application of this method is provided for a new station installed in the Pamir mountains.
- Open Access
- 22 January 2024
- Published by Springer Nature in Boundary-Layer Meteorology
- Vol. 190 (2) , 1-28
Turbulence in the Strongly Heterogeneous Near-Surface Boundary Layer over Patchy Snow
The near-surface boundary layer above patchy snow cover in mountainous terrain is characterized by a highly complex interplay of various flows on multiple scales. In this study, we present data from a comprehensive field campaign that cover a period of 21 days of the ablation season in an alpine valley, from continuous snow cover until complete melt out. We recorded near-surface eddy covariance data at different heights and investigated spectral decompositions. The topographic setting led to the categorisation of flows into up and down valley flows, with a down valley Föhn event in the middle of the observation period. Our findings reveal that the snow cover fraction is a major driver for the structure and dynamics of the atmospheric layer adjacent to the snow surface. With bare ground emerging, stable internal boundary layers (SIBL) developed over the snow. As the snow coverage decreased, the depth of the SIBL decreased below 1 m and spectra of air temperature variance showed a transition towards turbulent time scales, which were caused by the intermittent advection of shallow plumes of warm air over the snow surface. The intermittent advection could also be observed visually with high spatio-temporal resolution measurements using a thermal infrared camera. While the shallow advection only affected the lowest measurement level at 0.3 m, the measurements above at 1 m, 2 m, and 3 m indicate that the distribution of eddy size and, thus, the turbulence structure, did not distinctly change with height.
- 22 January 2024
- Published by Springer Nature in Boundary-Layer Meteorology
- Vol. 190 (2) , 1-28
Open AccessTurbulence in the Strongly Heterogeneous Near-Surface Boundary Layer over Patchy Snow
The near-surface boundary layer above patchy snow cover in mountainous terrain is characterized by a highly complex interplay of various flows on multiple scales. In this study, we present data from a comprehensive field campaign that cover a period of 21 days of the ablation season in an alpine valley, from continuous snow cover until complete melt out. We recorded near-surface eddy covariance data at different heights and investigated spectral decompositions. The topographic setting led to the categorisation of flows into up and down valley flows, with a down valley Föhn event in the middle of the observation period. Our findings reveal that the snow cover fraction is a major driver for the structure and dynamics of the atmospheric layer adjacent to the snow surface. With bare ground emerging, stable internal boundary layers (SIBL) developed over the snow. As the snow coverage decreased, the depth of the SIBL decreased below 1 m and spectra of air temperature variance showed a transition towards turbulent time scales, which were caused by the intermittent advection of shallow plumes of warm air over the snow surface. The intermittent advection could also be observed visually with high spatio-temporal resolution measurements using a thermal infrared camera. While the shallow advection only affected the lowest measurement level at 0.3 m, the measurements above at 1 m, 2 m, and 3 m indicate that the distribution of eddy size and, thus, the turbulence structure, did not distinctly change with height.
- Open Access
- 1 September 2023
- Published by Copernicus GmbH in Geoscientific Model Development
- Vol. 16 (17) , 5049-5068
The High-resolution Intermediate Complexity Atmospheric Research (HICAR v1.1) model enables fast dynamic downscaling to the hectometer scale
High-resolution (< 1 km) atmospheric modeling is increasingly used to study precipitation distributions in complex terrain and cryosphere–atmospheric processes. While this approach has yielded insightful results, studies over annual timescales or at the spatial extents of watersheds remain unrealistic due to the computational costs of running most atmospheric models. In this paper we introduce a high-resolution variant of the Intermediate Complexity Atmospheric Research (ICAR) model, HICAR. We detail the model development that enabled HICAR simulations at the hectometer scale, including changes to the advection scheme and the wind solver. The latter uses near-surface terrain parameters which allow HICAR to simulate complex topographic flow features. These model improvements clearly influence precipitation distributions at the ridge scale (50 m), suggesting that HICAR can approximate processes dependent on particle–flow interactions such as preferential deposition. A 250 m HICAR simulation over most of the Swiss Alps also shows monthly precipitation patterns similar to two different gridded precipitation products which assimilate available observations. Benchmarking runs show that HICAR uses 594 times fewer computational resources than the Weather Research and Forecasting (WRF) atmospheric model. This gain in efficiency makes dynamic downscaling accessible to ecohydrological research, where downscaled data are often required at hectometer resolution for whole basins at seasonal timescales. These results motivate further development of HICAR, including refinement of parameterizations used in the wind solver and coupling of the model with an intermediate-complexity snow model.
- 1 September 2023
- Published by Copernicus GmbH in Geoscientific Model Development
- Vol. 16 (17) , 5049-5068
Open AccessThe High-resolution Intermediate Complexity Atmospheric Research (HICAR v1.1) model enables fast dynamic downscaling to the hectometer scale
High-resolution (< 1 km) atmospheric modeling is increasingly used to study precipitation distributions in complex terrain and cryosphere–atmospheric processes. While this approach has yielded insightful results, studies over annual timescales or at the spatial extents of watersheds remain unrealistic due to the computational costs of running most atmospheric models. In this paper we introduce a high-resolution variant of the Intermediate Complexity Atmospheric Research (ICAR) model, HICAR. We detail the model development that enabled HICAR simulations at the hectometer scale, including changes to the advection scheme and the wind solver. The latter uses near-surface terrain parameters which allow HICAR to simulate complex topographic flow features. These model improvements clearly influence precipitation distributions at the ridge scale (50 m), suggesting that HICAR can approximate processes dependent on particle–flow interactions such as preferential deposition. A 250 m HICAR simulation over most of the Swiss Alps also shows monthly precipitation patterns similar to two different gridded precipitation products which assimilate available observations. Benchmarking runs show that HICAR uses 594 times fewer computational resources than the Weather Research and Forecasting (WRF) atmospheric model. This gain in efficiency makes dynamic downscaling accessible to ecohydrological research, where downscaled data are often required at hectometer resolution for whole basins at seasonal timescales. These results motivate further development of HICAR, including refinement of parameterizations used in the wind solver and coupling of the model with an intermediate-complexity snow model.
- Open Access
- 28 June 2023
- Published by Springer Nature in Research Square
Turbulence in The Strongly Heterogeneous Near-Surface Boundary Layer over Patchy Snow
The near-surface boundary layer above patchy snow cover in mountainous terrain is characterized by a highly complex interplay of various flows on multiple scales. In this study, we present data from a comprehensive field campaign that cover a period of 21 days of the ablation season in an alpine valley, from continuous snow cover until complete melt out. We recorded near-surface eddy-covariance data at different heights and investigate cospectral decompositions.The topographic setting led to the categorisation of flows into up and down valley, with most flows being thermally driven except for a Föhn event in the middle of the observation period. Our findings reveal that the snow cover fraction is a major driver for the structure and dynamics of the atmospheric layer adjacent to the snow surface. With bare ground emerging, stable internal boundary layers (SIBL) developed over the snow. As the snow coverage decreased, the depth of the SIBL decreased and cospectra of air temperature variance showed a transition towards turbulent time scales, which were caused by the intermittent advection of shallow plumes of warm air over the snow surface.In addition, our analysis of vertical profiles of turbulence kinetic energy indicates that the distribution of eddy size and, thus, the turbulence structure, did not significantly change towards the surface. However, the SIBLs caused a thermal decoupling of the atmospheric layer adjacent to the snow surface. We complement these findings by presenting high spatio-temporal resolution air temperature profiles.
- 28 June 2023
- Published by Springer Nature in Research Square
Open AccessTurbulence in The Strongly Heterogeneous Near-Surface Boundary Layer over Patchy Snow
The near-surface boundary layer above patchy snow cover in mountainous terrain is characterized by a highly complex interplay of various flows on multiple scales. In this study, we present data from a comprehensive field campaign that cover a period of 21 days of the ablation season in an alpine valley, from continuous snow cover until complete melt out. We recorded near-surface eddy-covariance data at different heights and investigate cospectral decompositions.The topographic setting led to the categorisation of flows into up and down valley, with most flows being thermally driven except for a Föhn event in the middle of the observation period. Our findings reveal that the snow cover fraction is a major driver for the structure and dynamics of the atmospheric layer adjacent to the snow surface. With bare ground emerging, stable internal boundary layers (SIBL) developed over the snow. As the snow coverage decreased, the depth of the SIBL decreased and cospectra of air temperature variance showed a transition towards turbulent time scales, which were caused by the intermittent advection of shallow plumes of warm air over the snow surface.In addition, our analysis of vertical profiles of turbulence kinetic energy indicates that the distribution of eddy size and, thus, the turbulence structure, did not significantly change towards the surface. However, the SIBLs caused a thermal decoupling of the atmospheric layer adjacent to the snow surface. We complement these findings by presenting high spatio-temporal resolution air temperature profiles.
- Open Access
- 14 February 2023
- Published by Copernicus GmbH in EGUsphere
- Vol. 2023, 1-30
The High-resolution Intermediate Complexity Atmospheric Research (HICAR v1.0) Model Enables Fast Dynamic Downscaling to the Hectometer Scale
High resolution (< 1 km) atmospheric modeling is increasingly used to study precipitation distributions in complex terrain and cryosphere-atmospheric processes. While this approach has yielded insightful results, studies over annual time-scales or at the spatial extents of watersheds remain unrealistic due to the computational costs of running most atmospheric models. In this paper we introduce a High-resolution variant of the Intermediate Complexity Atmospheric Research (ICAR) model, HICAR. We detail the model development that enabled HICAR simulations at the hectometer scale, including changes to the advection scheme and the wind solver. The latter uses near surface terrain parameters which allow HICAR to simulate complex topographic flow features. These model improvements clearly influence precipitation distributions at the ridge scale (50 m), suggesting that HICAR can approximate processes dependent on particle-flow interactions such as preferential deposition. A 250 m HICAR simulation over most of the Swiss Alps also shows monthly precipitation patterns similar to two different gridded precipitation products which assimilate available observations. Benchmarking runs show that HICAR uses 118x fewer computational resources than the WRF atmospheric model. This gain in efficiency makes dynamic downscaling accessible to ecohydrological research, where downscaled data is often required at hectometer resolution for whole basins at seasonal time scales. These results motivate further development of HICAR, including refinement of parameterizations used in the wind solver, and coupling of the model with an intermediate complexity snow model.
- 14 February 2023
- Published by Copernicus GmbH in EGUsphere
- Vol. 2023, 1-30
Open AccessThe High-resolution Intermediate Complexity Atmospheric Research (HICAR v1.0) Model Enables Fast Dynamic Downscaling to the Hectometer Scale
High resolution (< 1 km) atmospheric modeling is increasingly used to study precipitation distributions in complex terrain and cryosphere-atmospheric processes. While this approach has yielded insightful results, studies over annual time-scales or at the spatial extents of watersheds remain unrealistic due to the computational costs of running most atmospheric models. In this paper we introduce a High-resolution variant of the Intermediate Complexity Atmospheric Research (ICAR) model, HICAR. We detail the model development that enabled HICAR simulations at the hectometer scale, including changes to the advection scheme and the wind solver. The latter uses near surface terrain parameters which allow HICAR to simulate complex topographic flow features. These model improvements clearly influence precipitation distributions at the ridge scale (50 m), suggesting that HICAR can approximate processes dependent on particle-flow interactions such as preferential deposition. A 250 m HICAR simulation over most of the Swiss Alps also shows monthly precipitation patterns similar to two different gridded precipitation products which assimilate available observations. Benchmarking runs show that HICAR uses 118x fewer computational resources than the WRF atmospheric model. This gain in efficiency makes dynamic downscaling accessible to ecohydrological research, where downscaled data is often required at hectometer resolution for whole basins at seasonal time scales. These results motivate further development of HICAR, including refinement of parameterizations used in the wind solver, and coupling of the model with an intermediate complexity snow model.