NHNia Jamaria Harmon

Nia Jamaria Harmon

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nia Jamaria Harmon has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Publisher Correction: Electrosynthesis of arylglycines from carbon dioxide, nitrite and aldehydes

    by Qi Sun, Nia J. Harmon, Zhaoyu ‘cHarlie’ Cheng, Yuanzuo Gao, Hailiang Wang

  • Electrosynthesis of arylglycines from carbon dioxide, nitrite and aldehydes

    by Qi Sun, Nia J. Harmon, Zhaoyu ‘cHarlie’ Cheng, Yuanzuo Gao, Hailiang Wang


  • Potential‐Controlled Selective Electrocatalytic Reduction of Nitrite to Four Different Products

    by Nia J. Harmon, Jana Jelušić, Jan Paul Menzel, Bo Shang, Conor L. Rooney, Gary W. Brudvig, Victor S. Batista, Hailiang Wang

    We demonstrate for the first time that Pd metal can convert NO 2 − to N 2 O, N 2 , NH 2 OH, and NH 3 in a near‐neutral electrolyte, with high selectivity to each product attained by adjusting the applied electrode potential. Notably, N 2 and NH 2 OH, which are typically difficult to access, emerge as dominant products. Mechanistic investigation combining computational and experimental studies shows that NO 2 − electroreduction on Pd is controlled by the applied potential and surface coverage of adsorbed H atoms. The interplay of these two factors gives rise to four distinct reaction microenvironments that are consistent with the experimentally observed product distributions. At positive potentials, the pristine Pd surface favors *NO‐*NO coupling and N 2 O production, whereas at less positive potentials, the same surface with more reducing power favors N 2 . At mildly negative potentials, partial H coverage promotes *NO reduction over coupling and leads to NH 2 OH production, while at strongly negative potentials, abundant adsorbed H drives complete reduction to NH 3 . Together, these studies provide insight into the rich reductive chemistry at Pd active sites under electrochemical control and enable the rational design of Pd catalysts for environmental remediation and sustainable chemical synthesis.

  • Potential‐Controlled Selective Electrocatalytic Reduction of Nitrite to Four Different Products

    by Nia J. Harmon, Jana Jelušić, Jan Paul Menzel, Bo Shang, Conor L. Rooney, Gary W. Brudvig, Victor S. Batista, Hailiang Wang

    We demonstrate for the first time that Pd metal can convert NO 2 − to N 2 O, N 2 , NH 2 OH, and NH 3 in a near‐neutral electrolyte, with high selectivity to each product attained by adjusting the applied electrode potential. Notably, N 2 and NH 2 OH, which are typically difficult to access, emerge as dominant products. Mechanistic investigation combining computational and experimental studies shows that NO 2 − electroreduction on Pd is controlled by the applied potential and surface coverage of adsorbed H atoms. The interplay of these two factors gives rise to four distinct reaction microenvironments that are consistent with the experimentally observed product distributions. At positive potentials, the pristine Pd surface favors *NO‐*NO coupling and N 2 O production, whereas at less positive potentials, the same surface with more reducing power favors N 2 . At mildly negative potentials, partial H coverage promotes *NO reduction over coupling and leads to NH 2 OH production, while at strongly negative potentials, abundant adsorbed H drives complete reduction to NH 3 . Together, these studies provide insight into the rich reductive chemistry at Pd active sites under electrochemical control and enable the rational design of Pd catalysts for environmental remediation and sustainable chemical synthesis.

  • Electrochemical Nitrate Reduction to Ammonia Driven by Catalytic Monovacancies in Single-Walled Carbon Nanotubes

    by Jana Jelušić, Nia J. Harmon, Jan Paul Menzel, Shize Yang, Quentin C. Bertrand, Hailiang Wang, Gary W. Brudvig, Victor S. Batista

  • Metal/Oxide Interface Enabling Selective Electrocatalytic Reduction of Oxime to Amine in Neutral Electrolyte

    by Qi Sun, Jing Li, Bo Shang, Kunpeng Yu, Yuanzuo Gao, Nia J. Harmon, Conor L. Rooney, Hailiang Wang

    Electrochemical reduction of oximes promises a sustainable route for amine synthesis but is currently limited by the lack of mild electrolyte and low-cost catalyst systems. Here, we for the first time report selective electroreduction of a series of oximes to their corresponding amines in a pH-neutral aqueous electrolyte enabled by a Pb-PbO catalyst. Taking acetoxime as a model reactant, we find that the coexistence of Pb and PbO phases in the catalyst structure is essential for the high Faradaic efficiency and near-unity product selectivity for isopropylamine. Mechanistic studies reveal that the reduction starts with a rate-determining proton-coupled electron transfer step and proceeds through 2-propanimine as an intermediate. The same electrocatalyst also demonstrates high selectivity for other structurally diverse oxime reactants. These findings highlight the critical role of the metal/oxide interface in promoting selective and generalizable electrosynthesis of amines from oximes under mild conditions.


  • Neighboring Catalytic Sites Are Essential for Electrochemical Dechlorination of 2-Chlorophenol

    by Seonjeong Cheon, Shuang Zhu, Yuanzuo Gao, Jing Li, Nia J. Harmon, Wanyu Zhang, Joseph S. Francisco, Chongqin Zhu, Hailiang Wang

    The electrocatalytic reduction process is a promising technology for decomposing chlorinated organic pollutants in water but is limited by the lack of low-cost catalysts that can achieve high activity and selectivity. In studying electrochemical dechlorination of 2-chlorophenol (2-CP) in aqueous media, we find that cobalt phthalocyanine molecules supported on carbon nanotubes (CoPc/CNT), which is a highly effective electrocatalyst for breaking the aliphatic C-Cl bonds in 1,2-dichloroethane (DCA) and trichloroethylene (TCE), are completely inactive for reducing the aromatic C-Cl bond in 2-CP. Detailed mechanistic investigation, including volcano plot correlation between dechlorination rate and atomic hydrogen adsorption energy on various transition metal surfaces, kinetic measurements, in situ Raman spectroscopy, and density functional theory calculations, reveals that the reduction of the aromatic C-Cl bond in 2-CP goes through a hydrodechlorination mechanism featuring a bimolecular reaction between adsorbed atomic hydrogen and 2-CP on the catalyst surface, which requires neighboring catalytic sites, whereas the aliphatic C-Cl bonds in DCA and TCE are cleaved by direct electron transfer from the catalyst, which can occur on isolated single sites. This investigation leads to the discovery of metallic Co as a highly selective and active electrocatalyst for 2-CP dechlorination. This work provides new insights into the fundamental chemistry and catalyst design of electrochemical dechlorination reactions for wastewater treatment.


  • Influence of Carbon Nanotube Support on Electrochemical Nitrate Reduction Catalyzed by a Cobalt Complex

    by Nia Jamaria Harmon, Hailiang Wang

    Access to clean water is a pressing environmental and public health concern. Excess nitrate (NO3 -) from the overuse of fertilizer finds its way into our surface water and groundwater, which leads to adverse health effects such as cancer and causes significant damage to ecosystems.1-4 The electrochemical nitrate reduction reaction (NO3RR) has emerged as a promising water treatment approach to address this issue. The NO3RR involves the transformation of waste NO3 - into value-added nitrogen species, such as ammonia (NH3), via reduction. NH3 serves as a valuable chemical in various applications, including its use as a fertilizer, chemical precursor, fuel, and a potential hydrogen (H2) carrier for energy storage and transportation.5-7 Leveraging renewable energy, the NO3RR provides a sustainable approach to distributed NH3 production, which stands in stark contrast to the energy-intensive Haber-Bosch process.8-10 As a result, there is growing interest in designing catalysts for the selective reduction of NO3 - to NH3. However, this requires that we obtain a clear understanding of the role of each component in the catalyst structure. Molecular catalysts have unique advantages over other electrocatalytic materials due to their well-defined structures, which can be tailored through the choice of the metal center and ligands.11,12 Moreover, molecular catalysts can be immobilized on substrates to create heterogeneous electrocatalysts capable of achieving a high current density.13,14 In previous investigations, we showcased the efficacy of multi-walled carbon nanotubes (CNTs) as a catalyst support for electrochemical carbon dioxide reduction reactions.13,15 In heterogenized molecular catalysts, CNTs are generally believed to provide high surface area and electron conduction. However, our recent investigation reveals that CNTs can serve as catalysts themselves for the NO3RR,16 which expands our understanding of the diverse roles CNTs play in NO3 - reduction electrocatalysis. A major challenge in the field of electrocatalysis is the development of catalyst design strategies to control the reaction selectivity. We report on an underexplored approach to overcome this challenge by tuning the CNT support for a cobalt complex. With pristine CNTs as the support, the cobalt complex/CNT hybrid catalyst is selective for NO3 - reduction to NH3 with a maximum Faradaic efficiency of 70%. In contrast, the cobalt complex supported on oxidized CNTs (OCNTs) generates mostly H2 under the same conditions. On the basis of kinetic measurements which reveal that the rate-determining step of NO3 – reduction is limited by the first electron transfer without involving a proton, we propose that the oxygen functional groups on the OCNT support help deliver protons and steer the supported cobalt complexes from catalyzing NO3 - reduction to H2 evolution. The performance of both of these hybrid catalysts is compared with the controls of bare CNTs and OCNTs. Additional control experiments include tests conducted in the absence of NO3 -. These control experiments together with the rest of the experimental data provide strong evidence to support the notion that the product selectivity of the NO3RR catalyzed by cobalt complexes can be controlled via the CNT support. This study demonstrates the importance of tailoring the catalyst support to advance reactivity in catalysis for environmental remediation. References: Follett, R. F., et al. World J. 2001, 1, 920–926. https://doi.org/10.1100/tsw.2001.269. Duca, M., et al. Energy Environ. Sci. 2012, 5 (12), 9726. https://doi.org/10.1039/c2ee23062c. Galloway, J. N., et al. BioScience 2003, 53 (4), 341. https://doi.org/10.1641/0006-3568(2003)053[0341:TNC]2.0.CO;2. Ward, M. H., et al. Health Perspect. 2005, 113 (11), 1607–1614. https://doi.org/10.1289/ehp.8043. Wang, Z., et al. Sci. Technol. 2021, 11 (3), 705–725. https://doi.org/10.1039/D0CY02025G. Van Langevelde, P. H., et al. Joule 2021, 5 (2), 290–294. https://doi.org/10.1016/j.joule.2020.12.025. Chatterjee, S., et al. ACS Energy Lett. 2021, 6 (12), 4390–4394. https://doi.org/10.1021/acsenergylett.1c02189. Kyriakou, V., et al. Joule 2020, 4 (1), 142–158. https://doi.org/10.1016/j.joule.2019.10.006. Yüzbaşıoğlu, A. E., et al. Heliyon 2021, 7 (10), e08257. https://doi.org/10.1016/j.heliyon.2021.e08257. Rafiqul, I., et al. Energy 2005, 30 (13), 2487–2504. https://doi.org/10.1016/j.energy.2004.12.004. Corbin, N., et al. Nano Res. 2019, 12 (9), 2093–2125. https://doi.org/10.1007/s12274-019-2403-y. Wu, Y., et al. Chem. Res. 2021, 54 (16), 3149–3159. https://doi.org/10.1021/acs.accounts.1c00200. Zhang, X., et al. Commun. 2017, 8 (1), 14675. https://doi.org/10.1038/ncomms14675. Sun, L., et al. Energy Environ. Sci. 2020, 13 (2), 374–403. https://doi.org/10.1039/C9EE03660A. Wu, Y., et al. Nature 2019, 575 (7784), 639–642. https://doi.org/10.1038/s41586-019-1760-8. Harmon, N. J., et al. ACS Catal. 2022, 12 (15), 9135–9142. https://doi.org/10.1021/acscatal.2c01144.

  • Electrochemical CO2 Reduction in the Presence of Impurities: Influences and Mitigation Strategies

    by Nia J. Harmon, Hailiang Wang

    The electrochemical conversion of waste CO2 into useful fuels and chemical products is a promising approach to reduce CO2 emissions; however, several challenges still remain to be addressed. Thus far, most CO2 reduction studies use pure CO2 as the gas reactant, but CO2 emissions typically contain a number of gas impurities, such as nitrogen oxides, oxygen gas, and sulfur oxides. Gas impurities in CO2 can pose a significant obstacle for efficient CO2 electrolysis because they can influence the reaction and catalyst. This Minireview highlights early examples of CO2 reduction studies using mixed‐gas feeds, explores strategies to sustain CO2 reduction in the presence of gas impurities, and discusses their implications for future progress in this emerging field.


  • Electrochemical CO2 Reduction in the Presence of Impurities: Influences and Mitigation Strategies

    by Nia J. Harmon, Hailiang Wang

    The electrochemical conversion of waste CO2 into useful fuels and chemical products is a promising approach to reduce CO2 emissions; however, several challenges still remain to be addressed. Thus far, most CO2 reduction studies use pure CO2 as the gas reactant, but CO2 emissions typically contain a number of gas impurities, such as nitrogen oxides, oxygen gas, and sulfur oxides. Gas impurities in CO2 can pose a significant obstacle for efficient CO2 electrolysis because they can influence the reaction and catalyst. This Minireview highlights early examples of CO2 reduction studies using mixed‐gas feeds, explores strategies to sustain CO2 reduction in the presence of gas impurities, and discusses their implications for future progress in this emerging field.