DMDaniele Massaro

Daniele Massaro

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Daniele Massaro has a total of 35 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Drag reduction and subcritical turbulence in controlled pipe flows

    by Emanuele Gallorini, Daniele Massaro, Philipp Schlatter, Maurizio Quadrio

    Pipe flow controlled by streamwise-travelling waves of azimuthal wall velocity is studied using direct numerical simulations at a bulk Reynolds number italic Re Subscript b Baseline equals 4900 Re b = 4900 $\textit{Re}_b=4900$ . A comprehensive analysis of drag reduction shows that the flow response differs fundamentally from that of channel flow. Under suitable forcing, pipe flow relaminarises, whereas channel flow does not. Depending on the control parameters, the flow exhibits the spatially localised turbulent state characteristic of transitional pipe flow, with turbulent puffs persisting at bulk Reynolds numbers up to three times higher than in the uncontrolled case. The bulk Reynolds number alone does not determine the onset of localisation. Moreover, drag reduction, which alters the natural relation between bulk and friction velocities, is insufficient to identify a universal onset criterion. An intermittency indicator based on the spatial variance of the cross-sectional turbulent kinetic energy relates the emergence of localised turbulence to the low wall friction produced by the control, although the correspondence is not one-to-one. Despite their qualitative resemblance to canonical turbulent puffs, the controlled puffs exhibit distinct properties; for example, their fronts may propagate faster than the bulk flow. Overall, this work provides a comprehensive characterisation of the subcritical turbulent state and its turbulent puffs in controlled pipe flow, and offers a new perspective on control strategies that aim at flow relaminarisation.

  • Open Access

    Efficient Techniques in Spectral Element Methods for ResolvingTurbulent Flows over Roughness

    by Venkatesh Pulletikurthi, Aditya Parik, Daniele Massaro, Som Dutta, Philipp Schlatter

    High-order spectral element methods (SEM) offer an accurate representation of the solution across a wide range of turbulent flows. However, they are often limited by computational cost when resolving flow over roughness, due to the challenges associated with meshing complex and varied geometries. This study is the first to compare different SEM simulations that adopt the overlapping grid approach and adaptive mesh refinement (AMR) techniques. Specifically, we evaluated their capability to resolve a broad range of roughness scales, as well as their computational performance. The comparison was carried out using the classical transverse square bar roughness configuration as described by \citet{leonardi2003direct}. Our results showed that AMR achieved better accuracy while using approximately ${1/8}^\text{th}$ degrees of freedom required by a conforming mesh and approximately one-half of the overlapping method. Although the required number of degrees of freedom for adaptive non-conforming grid is lower than that of overlapping-Schwarz method, the computational cost per time unit for both AMR and overlapping method with Schwarz iteration Q=1 is similar, and it is improved by a factor of $3.5$ compared to conforming grid. Our results showed that AMR can resolve the flow without requiring prior knowledge of flow scales and overlapping Schwarz approach facilitates to separate high resolution regions from the low resolution regions to yield fewer elements. However, both offer similar computational performance compared to conformal methods.

  • Interpreting coherence in wall turbulence

    by Daniele Massaro, Fazle Hussain


  • Causally coherent structures in turbulent dynamical systems

    by Daniele Massaro, Saleh Rezaeiravesh, Philipp Schlatter

    The extraction of spatiotemporal coherence in high-dimensional, chaotic, nonlinear dynamical systems, such as turbulent flows, remains a fundamental challenge in physics, mathematics, and engineering. In this work, we employ Shannon transfer entropy (TE) to identify causally coherent motions in a zero-pressure-gradient turbulent boundary layer (TBL). This causality metric, rooted in information theory, enables the identification of sources and targets in dynamical systems using the corresponding time series. However, TE requires sophisticated tuning of various hyperparameters, such as the Markovian order of the source (m), which can spatially vary in wall-bounded turbulent flow. Here, we present an adaptive tuning and discuss the influence of m across different TBLs. We introduce the concept of causally coherent structures (CCS), i.e., coherent structures interpreted as spatiotemporal patterns of causality. Moreover, the net transfer entropy flux is also utilized to identify boundary layer locations acting either as sources or targets. The standard viscous, logarithmic, and outer layers are characterized by information fluxes, highlighting, for example, dominant top-down interactions between the inner and outer layers, analogously to the classical energy cascade. This work extends techniques previously employed in the literature, such as correlation and spectral analysis, and presents an approach that is inherently general and applicable to a wide range of chaotic dynamical systems, with applications in cognitive sciences, systems biology and finance.


  • Open Access

    Swirl switching in spatially developing bent pipes

    by Valerio Lupi, Daniele Massaro, Adam Peplinski, Philipp Schlatter

    Swirl switching refers to the temporal rotation of the plane of symmetry of the cross-sectional vortices about the equatorial plane of the curved pipe and may induce significant vibrations in piping systems. The origin of this phenomenon is not yet understood, and its relationship with turbulent fluctuations in the upstream straight section is still debated in the literature. To assess the effect of upstream turbulence, direct numerical simulations are performed for spatially developing bent pipe flows under both laminar and turbulent inflow conditions. Additionally, the influence of the bending angle on swirl switching and time-averaged flow characteristics is investigated. Proper orthogonal decomposition (POD) is applied to three-dimensional velocity fields to extract spatially coherent structures responsible for swirl switching. The phenomenon is observed for both inlet velocity profiles and bending angles, although it does not correspond to the dominant mode in the case of laminar inflow conditions. A reduced-order reconstruction using the most energetically relevant antisymmetric POD modes indicates a link between swirl switching and the shear layer within the bend. We therefore infer that swirl switching could arise because of a symmetry-breaking shear layer instability, representing a stage in the bifurcation cascade that leads to turbulence.


  • Adaptive Mesh Refinement for Global Stability Analysis of Transitional Flows

    by Daniele Massaro, Valerio Lupi, Adam Peplinski, Philipp Schlatter


  • Open Access

    Transition to turbulence on a rotating wind turbine blade at $Re_c=3 \times 10^5$

    by T.C.L. Fava, D. Massaro, P. Schlatter, D.S. Henningson, A. Hanifi

    The boundary-layer stability on a section of a rotating wind turbine blade with an FFA-W3 series aerofoil at a chord Reynolds number of $3 \times 10^5$ , with varying rotation and radii, is studied with direct numerical simulations and linear stability analyses. Low rotation does not significantly affect transition in the outboard blade region. The relative insensitivity to rotation is due to a laminar separation bubble near the leading edge, spanwise-deformed by a primary self-excited instability, promoting the secondary absolute instability of the Kelvin–Helmholtz (KH) vortices and rapid transition. Moderate increases in rotation, or moving inboard, stabilise the flow by accelerating the attached boundary layer and possibly inducing competition between cross-flow and KH modes. This delays separation and transition. Initially, for high rotation rates or radial locations close to the hub, transition is delayed. Nevertheless, strong stationary and travelling cross-flow modes are eventually triggered, spanwise modulating the KH rolls and shifting the transition line close to the leading edge. Cross-flow velocities as high as $56\,\%$ of the free stream velocity directed towards the blade tip are reached at the transition location. For radial locations farther from the hub, the effective angle of attack is decreased, and cross-flow transition occurs at lower rotation rates. The advance or delay of the transition line compared with a non-rotating configuration depends on the competing rotation effects of stabilising the attached boundary layer and triggering cross-flow modes in the separation flow region.


  • Open Access

    Energy-based characterisation of large-scale coherent structures in turbulent pipe flows

    by D. Massaro, J. Yao, S. Rezaeiravesh, F. Hussain, P. Schlatter

    Large-scale coherent structures in incompressible turbulent pipe flow are studied for a wide range of Reynolds numbers ( $Re_\tau =180, 550, 1000, 2000$ and $5200$ ). Employing the Karhunen–Loève decomposition and a novel approach based on the Voronoi diagram, we identify and classify statistically coherent structures based on their location, dimensions and $Re_{\tau }$ . With increasing $Re_{\tau }$ , two distinct classes of structures become more energetic, namely wall-attached and detached eddies. The Voronoi methodology is shown to delineate these two classes without the need for specific criteria or thresholds. At the highest $Re_{\tau }$ , the attached eddies scale linearly with the wall-normal distance with a slope of approximately $l_y\sim 1.2y/R$ , while the detached eddies remain constant at the size of $l_y \approx 0.26R$ , with a progressive shift towards the pipe centre. We extract these two classes of structures and describe their spatial characteristics, including radial size, helix angle and azimuthal self-similarity. The spatial distribution could help explain the differences in mean velocity between pipe and channel flows, as well as in modelling large and very-large-scale motions (LSM and VLSM). In addition, a comprehensive description is provided for both wall-attached and detached structures in terms of LSM and VLSM.


  • Open Access

    Global stability of the flow past a stepped cylinder

    by D. Massaro, P. Schlatter

    We investigate the global instability mechanism of the flow past a three-dimensional stepped cylinder. A comprehensive study is performed for different diameter ratios of the two joined cylinders ( $r=D/d$ ) ranging from $r=1.1$ to $r=4$ . Independently of $r$ , the spectrum of the linearised Navier–Stokes operator reveals a pair of complex conjugate eigenvalues, with Strouhal number $St \approx 0.11$ . The initial transition is triggered by a two-dimensional mechanism of the larger cylinder only, not affected by the presence of the junction and the smaller cylinder ( $Re_{D,cr}\approx 47$ ). The structural sensitivity analysis is used to identify where the instability mechanism acts. The onset of transition is solely localised in the large cylinder wake (L cell), where the wavemaker has two symmetric lobes across the separation bubble. When the Reynolds number increases, a second and a third unstable pair of complex conjugate eigenvalues appears. They are localised in the small cylinder (S) wake and modulation (N) region. For any $r$ , the appearance of unstable eigenmodes resembling the three cells S–N–L in the wake is observed. The nonlinear simulation results support this finding, in contrast with the previous classification of the laminar vortex shedding in direct (L–S) and indirect (L–N–S) modes interaction Lewis & Gharib (Phys. Fluids, vol. 4, 1992, pp. 104–117). This result indicates that each cell undergoes a supercritical Hopf bifurcation for any $r$ . As $r$ approaches $1$ , the modal linear stability results also show an unstable eigenmode in the wake of the small cylinder resembling a new modulation cell, named N2, similar to the N cell but mirrored with respect to the junction plane.


  • Open Access

    A comprehensive framework to enhance numerical simulations in the spectral-element code Nek5000

    by D. Massaro, A. Peplinski, R. Stanly, S. Mirzareza, V. Lupi, T. Mukha, P. Schlatter