Mohamad R. Saad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mohamad R. Saad has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Maarouf Saad
École de Technologie Supérieure
3 shared publications - Mahmoud El-Sayyah
School of Engineering, Universit du Qubec en Abitibi Tmiscamingue, Rouyn-Noranda, QC, Canada
2 shared publications Daniel Alejandro Rodriguez Caro
Université du Québec en Abitibi-Témiscamingue (UQAT)
1 shared publicationLaura Alejandra Martinez-Tejada
Institute of Science Tokyo
1 shared publication- Mhmed Algrnaodi
Electrical Engineering Department, École de Technologie Supérieure, Université du Québec, Canada
1 shared publication - Raouf Fareh
Electrical Engineering Department, University of Sharjah, Sharjah P.O. Box 27272, United Arab Emirates
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- p. 1
Robust Landmark-Based Gesture Recognition and Closed-Loop Path Tracking for Omnidirectional Robot Navigation
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- p. 1
Open AccessRobust Landmark-Based Gesture Recognition and Closed-Loop Path Tracking for Omnidirectional Robot Navigation
- Open Access
- 26 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 112642-112653
Nonlinear Model Predictive Control for Trajectory Tracking of Omnidirectional Robot Using Resilient Propagation
This paper proposes an enhanced Nonlinear Model Predictive Control (NMPC) framework that incorporates a robust, convergent variant of the resilient propagation (RPROP) algorithm to efficiently solve the Nonlinear Optimization Problem (NOP) in real time. The controller is developed for both constrained and unconstrained trajectory tracking of Wheeled Mobile Robots (WMRs), with operational constraints handled via the external penalty method. The proposed method introduces adaptive step sizes and a backtracking mechanism, significantly improving convergence speed without compromising accuracy. Simulation results show that, even under constraints, the proposed method reduces computational time by a factor of 6 to 11 compared to the Interior Point method and 2 to 4 compared to the Active Set method. In addition, it achieves superior tracking accuracy, with root mean square (RMS) position tracking errors reduced by approximately 50% relative to the benchmark methods. Real-time experiments conducted on the Robotino Festo Omnidirectional Mobile Robot (OMR) validate the method’s practical effectiveness, demonstrating faster convergence and improved velocity tracking performance, while maintaining comparable or better position tracking. These findings establish the proposed controller as a computationally efficient and accurate solution for real-time WMR trajectory tracking.
- 26 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 112642-112653
Open AccessNonlinear Model Predictive Control for Trajectory Tracking of Omnidirectional Robot Using Resilient Propagation
This paper proposes an enhanced Nonlinear Model Predictive Control (NMPC) framework that incorporates a robust, convergent variant of the resilient propagation (RPROP) algorithm to efficiently solve the Nonlinear Optimization Problem (NOP) in real time. The controller is developed for both constrained and unconstrained trajectory tracking of Wheeled Mobile Robots (WMRs), with operational constraints handled via the external penalty method. The proposed method introduces adaptive step sizes and a backtracking mechanism, significantly improving convergence speed without compromising accuracy. Simulation results show that, even under constraints, the proposed method reduces computational time by a factor of 6 to 11 compared to the Interior Point method and 2 to 4 compared to the Active Set method. In addition, it achieves superior tracking accuracy, with root mean square (RMS) position tracking errors reduced by approximately 50% relative to the benchmark methods. Real-time experiments conducted on the Robotino Festo Omnidirectional Mobile Robot (OMR) validate the method’s practical effectiveness, demonstrating faster convergence and improved velocity tracking performance, while maintaining comparable or better position tracking. These findings establish the proposed controller as a computationally efficient and accurate solution for real-time WMR trajectory tracking.
- Open Access
- 28 July 2023
- Published by SAGE Publications in Transactions of the Institute of Measurement and Control
- Vol. 46 (4) , 785-798
Extended state observer–based improved non-singular fast terminal sliding mode for mobile manipulators
The robust non-singular fast terminal sliding mode (NFTSM) controller is adopted in this work to solve the problem of tracking trajectory of a mobile manipulator (MM) suffering from uncertainties. The NFTSM method has the capability to ensure convergence rate and to provide good tracking accuracy and robustness against external perturbations and parameter uncertainties (total disturbances). However, the NFTSM controller needs high discontinuous gain to reject the effect of strong disturbances, which results in vibrations in the steady-state and chattering in the control law. To solve these issues, an extended state observer–based NFTSM technique is proposed for [ ]-degree of freedom (DoF) coupling MM. The proposed method is designed to approximate and compensate in real-time the uncertainties. It also ensures robustness against total disturbances, good convergence rate, and good tracking accuracy. The stability of the proposed control is also verified based on the Lyapunov theory. Experimental works are conducted on a 5-degree-of-freedom (5-DoF) MM where the results obtained demonstrate the effectiveness of the developed technique and prove the stability of the closed-loop system.
- 28 July 2023
- Published by SAGE Publications in Transactions of the Institute of Measurement and Control
- Vol. 46 (4) , 785-798
Open AccessExtended state observer–based improved non-singular fast terminal sliding mode for mobile manipulators
The robust non-singular fast terminal sliding mode (NFTSM) controller is adopted in this work to solve the problem of tracking trajectory of a mobile manipulator (MM) suffering from uncertainties. The NFTSM method has the capability to ensure convergence rate and to provide good tracking accuracy and robustness against external perturbations and parameter uncertainties (total disturbances). However, the NFTSM controller needs high discontinuous gain to reject the effect of strong disturbances, which results in vibrations in the steady-state and chattering in the control law. To solve these issues, an extended state observer–based NFTSM technique is proposed for [ ]-degree of freedom (DoF) coupling MM. The proposed method is designed to approximate and compensate in real-time the uncertainties. It also ensures robustness against total disturbances, good convergence rate, and good tracking accuracy. The stability of the proposed control is also verified based on the Lyapunov theory. Experimental works are conducted on a 5-degree-of-freedom (5-DoF) MM where the results obtained demonstrate the effectiveness of the developed technique and prove the stability of the closed-loop system.
- Open Access
- 7 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 118290-118301
Enhanced MPC for Omnidirectional Robot Motion Tracking Using Laguerre Functions and Non-Iterative Linearization
To cope with the computational complexity of the traditional model predictive control, and to reduce the error of the linearization and prediction processes, this paper presents an improved model predictive control algorithm, based on Laguerre functions, for the motion tracking of an omnidirectional mobile robot with non-iterative linearization. To design the controller, the kinematic modeling of the three-wheeled omnidirectional robot was first performed. Next, the model predictive algorithm was developed using Laguerre functions to parametrize the control signals. At each sampling instant of the online optimization, a linearization along the predicted trajectory, based on the duality principle between optimal control and stochastic filtering, was carried out to deal with the nonlinearities of the system. This non-iterative linearization provides better approximation of the nonlinear behavior which improves the prediction process and the tracking performance, with lower computational burden due to the use of the Laguerre functions. The new controller is applied to solve the trajectory-tracking problem of an omnidirectional robot. A comparative study between the proposed controller, the conventional model predictive control, and the nonlinear model predictive approach is made. Simulation results confirm that the new controller outperform the latter ones regarding tracking accuracy with considerably low computational effort. The feasibility of the controller is demonstrated by real-time experiment on the Robotino-Festo omnidirectional mobile robot.
- 7 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 118290-118301
Open AccessEnhanced MPC for Omnidirectional Robot Motion Tracking Using Laguerre Functions and Non-Iterative Linearization
To cope with the computational complexity of the traditional model predictive control, and to reduce the error of the linearization and prediction processes, this paper presents an improved model predictive control algorithm, based on Laguerre functions, for the motion tracking of an omnidirectional mobile robot with non-iterative linearization. To design the controller, the kinematic modeling of the three-wheeled omnidirectional robot was first performed. Next, the model predictive algorithm was developed using Laguerre functions to parametrize the control signals. At each sampling instant of the online optimization, a linearization along the predicted trajectory, based on the duality principle between optimal control and stochastic filtering, was carried out to deal with the nonlinearities of the system. This non-iterative linearization provides better approximation of the nonlinear behavior which improves the prediction process and the tracking performance, with lower computational burden due to the use of the Laguerre functions. The new controller is applied to solve the trajectory-tracking problem of an omnidirectional robot. A comparative study between the proposed controller, the conventional model predictive control, and the nonlinear model predictive approach is made. Simulation results confirm that the new controller outperform the latter ones regarding tracking accuracy with considerably low computational effort. The feasibility of the controller is demonstrated by real-time experiment on the Robotino-Festo omnidirectional mobile robot.
- Open Access
- 3 December 2013
- Published by Wiley in Journal of Control Science and Engineering
- Vol. 2013, 1-17
Workspace Tracking Control of Two-Flexible-Link Manipulator Using Distributed Control Strategy
A distributed nonlinear control strategy for two-flexible-link manipulators is presented to track a desired trajectory in the robots workspace. The inverse dynamics problem is solved by transforming the desired trajectory from the workspace to the joint space using an intermediate space, called virtual space, and then using the quasi-static approach. To solve the nonminimum phase problem, an output redefinition technique is used. This output consists of the motors angle augmented with a weighted value of the links extremity. The distributed control strategy consists in controlling the last link by assuming that the first link is stable and follows its desired trajectories. The control law is developed to stabilize the error dynamics and to guarantee bounded internal dynamics such that the new output is as close as possible to the tip. The weighted parameter defining the noncollocated output is then selected. The same procedure is applied to control and stabilize the first link. The asymptotical stability is proved using Lyapunov theory. This algorithm is applied to a two-flexible-link manipulator in the horizontal plane, and simulations showed a good tracking of the desired trajectory in the workspace.
- 3 December 2013
- Published by Wiley in Journal of Control Science and Engineering
- Vol. 2013, 1-17
Open AccessWorkspace Tracking Control of Two-Flexible-Link Manipulator Using Distributed Control Strategy
A distributed nonlinear control strategy for two-flexible-link manipulators is presented to track a desired trajectory in the robots workspace. The inverse dynamics problem is solved by transforming the desired trajectory from the workspace to the joint space using an intermediate space, called virtual space, and then using the quasi-static approach. To solve the nonminimum phase problem, an output redefinition technique is used. This output consists of the motors angle augmented with a weighted value of the links extremity. The distributed control strategy consists in controlling the last link by assuming that the first link is stable and follows its desired trajectories. The control law is developed to stabilize the error dynamics and to guarantee bounded internal dynamics such that the new output is as close as possible to the tip. The weighted parameter defining the noncollocated output is then selected. The same procedure is applied to control and stabilize the first link. The asymptotical stability is proved using Lyapunov theory. This algorithm is applied to a two-flexible-link manipulator in the horizontal plane, and simulations showed a good tracking of the desired trajectory in the workspace.