HHHui Huang

Hui Huang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hui Huang has a total of 140 co-authors. Here are the top co-authors by number of shared publications:

  • Wenkui Zhang

    College of Materials Science and Engineering Zhejiang University of Technology Hangzhou China

    41 shared publications
  • Yongping Gan

    College of Materials Science and Engineering Zhejiang University of Technology Hangzhou People's Republic of China

    35 shared publications
  • Jun Zhang

    College of Materials Science and Engineering Zhejiang University of Technology Hangzhou 310014 China

    34 shared publications
  • Yang Xia

    College of Materials Science and Engineering Zhejiang University of Technology Hangzhou China

    34 shared publications
  • Xinping He

    College of Materials Science and Engineering Zhejiang University of Technology Hangzhou People's Republic of China

    23 shared publications
  • Ruyi Fang

    State Key Laboratory of Advanced Separation Membrane Materials, College of Materials Science and Engineering

    18 shared publications

Latest Publications

  • Unraveling the Role of Resting Period in Gel Polymer Electrolyte Evolution and LiF‐Rich SEI Formation for Stable Lithium Metal Batteries

    by Chenlu Xu, Tengtao Hu, Xiang Yan, Binyu Lu, Tiansheng Chen, Yang Xia, Jun Zhang, Xinhui Xia, Wenkui Zhang, Yongping Gan, et al.

    In situ polymerized gel polymer electrolytes (GPEs) offer a promising strategy for lithium metal batteries, as they combine high ionic conductivity of liquid electrolytes with good mechanical stability of solid electrolytes. However, the composition evolution of GPEs with the resting period and the subsequent formation of solid electrolyte interphase (SEI) remains poorly understood. Herein, the influence of the resting time on the mechanical properties, lithium‐ion transport kinetics, and SEI stability of GPEs is systematically investigated. By optimizing the resting time, the premature decomposition of fluorinated additives is revealed to be suppressed, and interfacial reactions are steered toward the formation of a robust SEI rich in LiF. The as‐formed GPEs exhibit a high ionic conductivity of 1.96 × 10 −3 S cm −1 and a Li + transfer number of 0.67 at 30°C. As a result, Li||Li symmetric cells achieve stable cycling for over 2600 h, while LiFePO 4 ||Li full cells retain 94.68% of initial capacity after 1000 cycles at 1 C. This work elucidates the role of the resting time in modulating electrolyte chemical composition and SEI formation, providing a practical approach from a new perspective for developing long‐life quasi‐solid‐state lithium metal batteries.

  • Interface Engineering of Cu-Modified Silicon/Graphite Anode for High-Performance Lithium-Ion Batteries

    by Haijun Yang, Shenghui Shen, Zhong Qiu, Long Wang, Xinqi Liang, Guoxiang Pan, Jianbo Wu, Yongqi Zhang, Jiayuan Xiang, Ming Song, et al.

  • Harnessing High‐Pressure CO 2 for Molecular‐Scale Interfacial Engineering in Sulfide‐Based All‑Solid‑State Lithium Metal Batteries

    by Ruyi Fang, Xiaohan Fu, Xinxu Wang, Ruojian Ma, Min Fan, Hui Huang, Jun Zhang, Xinhui Xia, Xinyong Tao, Yang Xia, et al.

    The rapid expansion of the low‐altitude economy has intensified the demand for energy storage with exceptional rate capability. Sulfide electrolytes, with high room‐temperature ionic conductivity and processability, are pivotal for next‐generation all‐solid‐state batteries (ASSBs), but their interfacial instability and the resulting low critical current density severely hinder high‐rate performance. Here, we propose a molecular‐level interfacial construction strategy using high‐pressure CO 2 to in situ engineer the Li 6 PS 5 Cl (LPSC) surface. Through precise regulation with concentrated CO 2 molecules, a nanoscale Li 2 CO 3 ‐rich layer with high Young's modulus and superior oxidant‑resistance is constructed. This designed interphase effectively suppresses parasitic reactions, enhances mechanical integrity, and homogenizes Li‐ion flux. Consequently, the modified LPSC exhibits exceptional dendrite‐suppression capability, achieving a critical current density of 7.76 mA cm −2 , and enables stable Li plating and stripping over 920 h at 5 mA cm −2 in symmetric cells. Furthermore, full cells paired with a high‐voltage LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathode demonstrated outstanding rate capability at 5C with a power density of 3160 W kg −1 and maintained stable cycling over 500 cycles at 0.5C. This work proposes a simple and effective molecular‐scale interface engineering method to overcome the power limitation problem of sulfide‐based ASSBs.


  • Chelation-Driven Phosphorus Doping: Upcycling Fungal Industrial Waste into Hard Carbon Anodes

    by Xinping He, Lanmei Yang, Shuai Ruan, Lingzhi Tian, Jiayuan Xiang, Hui Huang, Yongping Gan, Yang Xia, Jun Zhang, Ruyi Fang, et al.

  • Multidimensional Molecular Welding Engineering of In Situ Polymerized Electrolytes Enables Stable 4.6 V LiCoO 2 Quasi Solid‐State Batteries

    by Zhouyu Huang, Tianqi Yang, Min Jiang, Haiyuan Zhang, Wenlong Song, Hui Huang, Yang Xia, Xinyong Tao, Xinhui Xia, Wenkui Zhang, et al.

    Practical application of LiCoO 2 ‐based 4.6 V class lithium ion batteries suffers from severe issues, including electrolyte decomposition, electrode/electrolyte interface degradation and lattice structure deterioration. Herein, ethoxylated trimethylolpropane triacrylate, acrylonitrile, trifluoroethyl methacrylate are copolymerized to crosslink the liquid component fluoroethylene carbonate (FEC), which constructs a ternary crosslinked in situ polymerized electrolyte (EATF). Benefiting from this complementary design, molecule segments of EATF are welded though multiple hydrogen bonds to constitute a physical network that enhances intrinsic mechanical stability, improves the Li + conductivity (1.9 mS cm −1 ) and expands the electrochemical window (5.32 V). Concurrently, inner Helmholtz plane reconstruction at LCO/EATF interface induces the formation of a thin and uniform inorganic‐rich cathode electrolyte interface. Crucially, cyano groups within EATF and Co in LCO surface are welded to form direct lattice coupling effect, modulating the electron spin state of Co to inhibit irreversible phase transition. These synergistic effects stabilize the LCO structure during operation under 4.6 V, enabling LCO/EATF/Li batteries with excellent electrochemical performance. Ah‐level LCO/Gr pouch cells demonstrate cycling stability after 100 cycles at 0.2C rate with 91.6% capacity retention. This work provides new insights into combining physical network with lattice coupling effect to boost 4.6 V LCO/Li quasi solid‐state batteries.


  • Enabling Durable Quasi-Solid-State Li–S Batteries with an Organic Nitrate Additive for Anode Protection and Polysulfide Confinement

    by Xinlong Fan, Guojian Lin, Zhouyu Huang, Tianqi Yang, Wenkui Zhang, Dan Li, Haiyuan Zhang, Hui Huang, Wenlong Song, Yang Xia, et al.

    Poly(1,3-dioxolane) (PDOL)-based electrolytes are promising candidates for lithium–sulfur (Li–S) batteries due to their high ionic conductivity and low cost. However, their poor interfacial compatibility with lithium metal impedes the formation of a stable solid electrolyte interphase (SEI). This challenge is further exacerbated by the fact that conventional nitrate additives (e.g., LiNO3) inhibit 1,3-dioxolane (DOL) polymerization. Herein, we propose isosorbide dinitrate (ISDN), a covalent organic nitrate, as a multifunctional additive that not only promotes DOL polymerization but also enables the formation of an inorganic-rich hybrid SEI (Li3N and LiNxOy), as verified through X-ray photoelectron spectroscopy (XPS) analysis and theoretical calculations. The reinforced SEI enhances interfacial ion transport and mechanical robustness, thereby achieving uniform and dendrite-free lithium deposition. Density functional theory (DFT) calculations further reveal strong chemical interactions between ISDN and PDOL, which effectively enhance the adsorption of polysulfide onto PDOL to suppress the shuttle effect. Benefiting from these synergistic functions, Li|PDOL@ISDN|Li symmetric cells achieve stable cycling exceeding 1000 h without short-circuit failure. Quasi-solid-state Li–S batteries also demonstrate excellent cycling stability, with a capacity retention of 84.7% after 100 cycles at 0.2C. This work offers a promising strategy for designing high-performance solid-state Li–S batteries based on PDOL electrolytes.

  • Molecular Interfacial Engineering of Sulfide Electrolytes via R134a Gas–Solid Reaction Toward Low-Pressure All-Solid-State Lithium Metal Batteries

    by Ruyi Fang, Xiaohan Fu, Ruojian Ma, Xinxu Wang, Min Fan, Hui Huang, Jun Zhang, Xinhui Xia, Xinyong Tao, Wenkui Zhang, et al.

  • A Partially Stripped Succinonitrile Shield Rendering Air‐Stable Li 5 FeO 4 Prelithiation Agent for Dendrite‐Free and Long‐Lifespan Lithium‐Ion Batteries

    by Min Fan, Longfei Li, Yaning Liu, Ruojian Ma, Yongquan Zheng, Ruyi Fang, Yongping Gan, Hui Huang, Xinping He, Jun Zhang, et al.

    Li 5 FeO 4 (LFO) is one of the promising prelithiation additives due to its high theoretical capacity (>867 mA h g −1 ) and facile synthesis. Nevertheless, its practical applicability is grossly compromised by its high air sensitivity. Succinonitrile (SN) is an expected coating material with excellent air stability, high ionic conductivity, and a wide electrochemical window. Herein, a rationally designed SN layer is proposed to evenly coat LFO particles (LFO@SN) through a facile wet‐chemical process. On the one hand, SN effectively suppresses the spontaneous alkalization reaction on the surface of LFO under ambient environment, thereby achieving a high initial charge capacity of 623.8 mA h g −1 after air exposure (1 h, 25°C, 60%RH). On the other hand, SN partially dissolves in electrolyte and promotes the formation of a Li 3 N‐containing solid electrolyte interphase, while the residual part acts as a harmful Fe ion adsorbent to prevent its dissolution. Impressively, the LiFePO 4 ||graphite full cells with LFO@SN additive deliver a remarkable discharge capacity of 167.4 mA h g −1 and superior capacity retention of 97.3% after 200 cycles. This work provides a simple and feasible strategy to fabricate air‐stable prethiation additives with ultra‐high lithium compensation capacity and interface stabilization ability for advanced lithium‐ion batteries.

  • Plasma-Engineered Hybrid Interphase Induces Preferred Lithium Deposition for Enhanced Lithium Metal Anodes

    by Xueqi Du, Jiayuan Xiang, Ping Liu, Long Wang, Haijun Yang, Guoxiang Pan, Feng Cao, Jianbo Wu, Zhong Qiu, Xinqi Liang, et al.


  • Open Access

    Dual‐Armor Architecture‐Mediated Microstructural Engineering of Germanium Anode for Advanced Liquid‐ and Solid‐State Batteries

    by Tiansheng Chen, Xiang Yan, Tengtao Hu, Jun Zhang, Huaizheng Huang, Yang Xia, Wenkui Zhang, Xinhui Xia, Xinyong Tao, Xue Li, et al.

    Germanium (Ge) is an attractive anode material for advanced lithium‐ion batteries (LIBs) due to its high theoretical capacity, excellent Li + diffusivity, and high electronic conductivity. However, its substantial volume variation and unstable solid electrolyte interphase (SEI) during cycling lead to rapid capacity decay. Here, a p‐Ge/SiO 2 /NC‐2 composite with a dual‐armor architecture is developed through a rational pore‐filling and interface engineering strategy. This unique structure features a porous Ge skeleton with embedded SiO 2 microspheres and an outer N‐doped carbon layer, forming a stable inner support and outer confinement system. The mechanical integrity is enhanced by the porous structure and the rigid SiO 2 particles, which collectively inhibit pore collapse and mitigate volume expansion. Meanwhile, the N‐doped carbon layer not only facilitates rapid charge transfer but also promotes the formation of a stable SEI enriched with LiF and Li 3 N in liquid electrolyte systems. Finite element simulation further verifies that this synergistic dual‐armor design enables low stress strain and high structural stability during cycling. As a result, the composite anode demonstrates exceptional lithium storage performance, achieving a high capacity retention of 94.4% after 250 cycles at 0.5 C in the LFP||p‐Ge/SiO 2 /NC‐2 full cells. Notably, the p‐Ge/SiO 2 /NC‐2||LPSC||Li all‐solid‐state lithium‐ion batteries (ASSLIBs) with a sulfide solid electrolyte maintain stable cycling, delivering a specific capacity of 449 mAh g −1 at 0.5 A g −1 . This work highlights the crucial role of rational structural design in advancing Ge‐based anodes for high‐performance energy storage systems.