GCGiorgio Del Castello

Giorgio Del Castello

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Giorgio Del Castello has a total of 229 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Background of the BULLKID detector array operated with a moderate shield on the surface

    by D. Delicato, A. Acevedo-Rentería, M. Folcarelli, G. Del Castello, M. Cappelli, L. E. Ardila-Perez, L. Bandiera, C. Bonomo, M. Calvo, R. Caravita, et al.

    We present the operation with moderate radiation shield in a surface laboratory of BULky and Low-threshold Kinetic Inductance Detector) (BULLKID), a cryogenic detector for searches of light dark matter or coherent elastic neutrino-nucleus scattering. The detector consists of an array of 60 cubic silicon particle absorbers of 0.34 g each, sensed by cryogenic kinetic inductance detectors. The analysis presented focuses on data from 15 elements of the array, with two central units used to evaluate the background and with their surrounding elements used as veto. The low energy spectrum resulting from an exposure of 290 hours to ambient backgrounds, acquired with the use of external and internal radiation shields, is compatible with the simulations at the level of ( 6.8 ± 0.4 stat . ± 0.1 syst . ) × 10 4 counts / keV kg days from 2 keV down to an energy of 600 eV. The region between 225 eV and 600 eV shows a rise in background in disagreement with the simulations, while not sharing some of the key traits of the low energy excess observed in other cryogenic experiments. The high energy spectrum shape is in overall agreement with the simulations and displays the typical particle-induced x-ray emission of the surrounding lead.

  • Open Access

    Sensitivity enhancement techniques for cryogenic calorimeters in the NUCLEUS experiment

    by M. Cappelli, A. Wallach, H. Abele, G. Angloher, B. Arnold, M. Atzori Corona, A. Bento, E. Bossio, F. Buchsteiner, J. Burkhart, et al.

    Phonon-mediated cryogenic calorimeters find application in rare event searches due to their intrinsically low energy threshold. Achieving optimal sensitivity for these kinds of detectors is crucial for signal identification, leading to various optimization techniques. In this work, we present two complementary methods to increase the sensitivity of cryogenic detectors read out by transition-edge sensors, developed and tested in the context of the NUCLEUS experiment. The first procedure maps the signal-to-noise ratio of the device across a wide range of operating points, to identify the configuration with maximal sensitivity to be used during data taking. The second method exploits the double readout of the detector, combining the information from different channels with a two-dimensional optimum filter analysis that effectively lowers the energy threshold. By combining both techniques at the same time, we obtain a baseline resolution of 2.94 ± 0.05 stat ±0.74 syst eV using a CaWO 4 based detector, achieving a promising result ahead of the first run of NUCLEUS at the experimental site.

  • Open Access

    Publisher Correction: Characterization of the low energy excess using a NUCLEUS $\text {Al}_{2}\text {O}_{3}$ detector

    by H. Abele, G. Angloher, B. Arnold, M. Atzori Corona, A. Bento, E. Bossio, F. Buchsteiner, J. Burkhart, F. Cappella, M. Cappelli, et al.

  • Open Access

    Characterization of the low energy excess using a NUCLEUS Al$_2$O$_3$ detector

    by H. Abele, G. Angloher, B. Arnold, M. Atzori Corona, A. Bento, E. Bossio, F. Buchsteiner, J. Burkhart, F. Cappella, M. Cappelli, et al.

    The NUCLEUS experiment aims to detect coherent elastic neutrino–nucleus scattering of reactor antineutrinos using low-threshold, gram-scale cryogenic calorimeters. Similar to other low-threshold experiments, NUCLEUS observes a sharp rise in the event rate below a few hundred eV, referred to as the low energy excess (LEE), whose origin remains yet unidentified. Building on results from the NUCLEUS testing and commissioning at the Technical University of Munich and from previous characterization campaigns, we present a comprehensive study of the background rate measured with a sapphire detector equipped with two transition-edge sensors under various experimental conditions. We find no evidence for a dependence of the LEE rate on the particle background level, whereas the results indicate that slower cooling-down procedures lead to lower initial LEE rates. The behavior of the LEE rate during the same cooldown is comparable across the measurements and is best described by a power law with a common exponent across datasets of $$(-0.59\pm 0.06)$$ ( - 0.59 ± 0.06 ) , when time is expressed from the moment the detector reaches the 4 K temperature. These findings provide valuable guidance for future LEE mitigation strategies in the NUCLEUS experiment.


  • Open Access

    The RFSoC-based electronics readout system for the BULLKID-DM experiment: sub-GeV dark matter detection with MKIDs

    by L.E. Ardila-Perez, T. Muscheid, R. Gartmann, D. Crovo, A. Cruciani, M. De Lucia, G. Del Castello, D. Delicato, M. Folcarelli, T. Lari, et al.

    We present the readout and data acquisition (DAQ) system for BULLKID-DM, a cryogenic dark-matter experiment employing Kinetic Inductance Detectors (KIDs) to probe below 1 GeV dark matter candidates. The system is built around an AMD RFSoC (ZCU216) platform that synthesizes densely spaced probe tones, performs frequency demultiplexing and amplitude demodulation, and executes real-time triggering and background suppression across up to 16 readout lines with 145 resonators per line in the 700 MHz to 950 MHz band. A fully automated calibration flow integrates vector-network-analyzer (VNA) functionality, resonator-circle acquisition with in-firmware phase rotation for maximum trigger sensitivity, and an energy calibration scheme based on LED illumination via a mezzanine board on the FMC+ connector. We summarize architecture, firmware, preliminary phase-noise studies, and the status of the detector demonstrator. The system is ready for scale-up to the full BULLKID-DM detector at the Laboratori Nazionali del Gran Sasso (LNGS).

  • Enhanced athermal phonon responsivity in a kinetic inductance detector with integrated phonon collectors

    by L. Pesce, A. L. De Santis, M. Calvo, M. Cappelli, U. Chowdhury, A. Cruciani, G. Del Castello, D. Delicato, M. Folcarelli, M. del Gallo Roccagiovine, et al.

    Cryogenic phonon detectors are adopted in light dark matter searches and coherent elastic neutrino-nucleus scattering experiments as they can achieve low energy thresholds. The phonon-mediated sensing of silicon particle absorbers has already been proved with kinetic inductance detectors (KIDs), acting both as sensors and athermal phonon absorbers. In this work, we present the design and the performance of an improved detector design. In this architecture, the KID acts only as a sensor and is coupled to dedicated phonon collectors. When a signal is coming from the substrate, the presence of a separated collector allows to detect a higher increase in quasi-particle density, thereby enhancing its responsivity. The meander of the KID is composed of a 77 nm trilayer wire of aluminum–titanium–aluminum, while the phonon collectors are made of a 100 nm aluminum layer and act as quasi-particle funnels. Inside the collectors, the absorbed athermal phonons generate quasi-particles, which, after diffusion, are trapped in the lower-gap superconducting trilayer. The performance of this setup is compared to that of a standard phonon-mediated KID, showing an increased phonon collection efficiency by a factor of around 7.


  • Open Access

    Energy calibration of bulk events in the BULLKID detector

    by M. Folcarelli, D. Delicato, A. Acevedo-Rentería, L. E. Ardila-Perez, L. Bandiera, M. Calvo, M. Cappelli, R. Caravita, F. Carillo, U. Chowdhury, et al.

    BULLKID is a cryogenic, solid-state detector designed for direct searches of particle Dark Matter candidates, with mass $$\lesssim 1$$ ≲ 1 GeV/c $$^2$$ 2 , and coherent neutrino-nucleus scattering. It is based on an array of dice carved in 5 mm thick silicon crystal, sensed by phonon-mediated Kinetic Inductance Detectors. In previous works, the array was calibrated with bursts of optical photons, which are absorbed in the first hundreds nanometers of the dice and give rise to surface events. In this work, we present the reconstruction of bulk events through the 59.5 keV $$\gamma $$ γ -ray generated by an $$^{241}$$ 241 Am source, which emulates more closely the interaction of Dark Matter and neutrinos. The peak resolution is $$5\%~(\sigma )$$ 5 % ( σ ) and its position is shifted by less than $$10\%$$ 10 % with respect to the optical calibration. We observe that the resolution is further improved by a factor 2 combining the signal from neighboring dice. These results confirm the performance of the detector in view of the physics goals of the BULLKID-DM experiment for dark matter search.


  • Developing the Cryogenic Veto for BULLKID-DM Experiment

    by T. Lari, M. del Gallo Roccagiovine, G. Soum-Sidikov, D. Lhuillier, A. Acevedo-Rentería, L. E. Ardila-Perez, P. Azzurri, L. Bandiera, M. Calvo, M. Cappelli, et al.

    BULLKID-DM is a cryogenic experiment that will use phonon-sensing Kinetic Inductance Detectors (KIDs) to search for $\leq 1\ \text{GeV}/\text{c}^{2}$ WIMP dark matter particles. The experiment will be conducted in the low background environment of the underground Gran Sasso National Laboratories in Italy. In the experiment's energy region of interest (200 eV - 2 keV), it is crucial to minimise background signals from muons, $\gamma$-rays and neutrons. For this reason, the collaboration is developing a cryogenic anticoincidence detector (veto) composed of high density scintillating crystals read out by KID-based light detectors. We conducted a study to select the optimal veto material. Along with Bismuth Germanate B $_{4}$ G$_{3}$O $_{12}$ (BGO), we have identified Gadolinium Oxyorthosilicate Gd$_{2}$ SiO$_{5}$ (GSO) and Gadolinium Aluminum Gallium Garnet Gd $_{3}$ Al$_{2}$Ga $_{3}$ O$_{12}$ (GAGG), which contain Gadolinium and thus are ideal for absorption of thermal neutrons. We tested the scintillating properties of the three crystals at cryogenic temperatures down to 20 K. GAGG exhibited the highest light yield and sub-microsecond scintillation times. Furthermore, we validated the effectiveness of the veto through simulation of the backgrounds originating from photon and neutron fluxes in the full BULLKID-DM experimental setup. A benchmark detector composed of a large (3x3 inch cylinder) BGO crystal coupled to a Si wafer equipped with with a KID was tested. We successfully operated this device by measuring the energy spectrum of a $^{137}$Cs gamma source. We then estimated the light yield, energy resolution, and expected energy threshold. We interpreted the results with a simulation that takes into account crystal scintillation, optical photon transport, and KID response. Our finding allow for the optimization of the coupling between a KID and a scintillating crystal to further enhance the detection performance of the BULLKID-DM veto.


  • Real-Time Readout System Design for the BULLKID-DM Experiment: Enhancing Dark Matter Search Capabilities

    by T. Muscheid, R. Gartmann, L. E. Ardila-Perez, A. Acevedo-Rentería, L. Bandiera, M. Calvo, M. Cappelli, R. Caravita, F. Carillo, U. Chowdhury, et al.

    The BULLKID-DM experiment aims to detect WIMP-like potential Dark Matter particles with masses below 1 GeV/c$^{2}$. Sensing these particles is challenging, as it requires nuclear recoil detectors characterized by high exposure and an energy threshold in the order of 100 eV, achieved with cryogenic phonon detectors. BULLKID-DM introduces a detector that combines the low energy threshold with a new scalable technology, reaching a total target mass of 800 g. The core detector of the BULLKID-DM experiment is composed of 16 100mm silicon wafers, each segmented in 145 dice for a total of more than 2000 units, each sensed by a Microwave Kinetic Inductance Detector (MKID). The MKIDs on each wafer are coupled to a single transmission line and read using a frequency division multiplexing approach by the room-temperature data acquisition. In this contribution, we describe and assess the design of the room-temperature readout electronics system, including the selected hardware components and the FPGA firmware which contains the real-time signal processing stages for tone generation, frequency demultiplexing, and event triggering. We evaluate the system on the ZCU216 board, a commercial evaluation card built around a Radio-Frequency System-on-Chip (RFSoC) with integrated high-speed DACs and ADCs, and connected it to a custom-designed analog front-end for signal conditioning.