Zhu Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhu Liu has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Aijun Yang
Xi’an Jiaotong University
8 shared publications - Mingzhe Rong
Xi’an Jiaotong University
8 shared publications - Xiaohua Wang
Xi’an Jiaotong University
8 shared publications - Huan Yuan
Xian Jiaotong University
6 shared publications - Likai Zheng
State Key Laboratory of Electrical Insulation and Power Equipment, Xian Jiaotong University, Xian, China
6 shared publications - Jifeng Chu
Department of Electrical Engineering, Xian Jiaotong University, Xian, China
4 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (11) , 20748-20764
Parameter Optimization Method for the Free-Standing Magnetic Field Energy Harvester Based on an Improvedd Multiobjective Particle Swarm Optimization Algorithm
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (11) , 20748-20764
Parameter Optimization Method for the Free-Standing Magnetic Field Energy Harvester Based on an Improvedd Multiobjective Particle Swarm Optimization Algorithm
- Open Access
- 7 February 2026
- Published by Elsevier in SSRN Electronic Journal
Parameter Optimization Method for the Free-Standing Magnetic Field Energy Harvester Based on an Improved Multi-Objective Particle Swarm Optimization Algorithm
The free-standing magnetic field energy harvester (FSMFEH) is an effective solution to the power supply challenge for large-scale sensor networks, owing to its flexible installation and broad applicability. Structural parameter optimization is essential to enhance the power density of the FSMFEH. However, existing parameter optimization methods based on the FSMFEH mathematical model neglect the interdependencies among parameters, hindering efficient identification of optimal solutions and exhibiting strong subjectivity and limited generalizability. Therefore, a novel parameter optimization method for the FSMFEH based on an improved multi-objective particle swarm optimization (MOPSO) algorithm is proposed. First, the output power and power density models of the FSMFEH considering the magnetic core saturation characteristics are derived, and a multi-objective parameter optimization model corresponding to the FSMFEH parameter optimization problem is formulated. Second, an improved MOPSO algorithm is developed based on a control parameter optimization strategy to enhance convergence and search accuracy. Finally, the improved MOPSO algorithm is employed to solve the FSMFEH parameter optimization problem, and the optimal structural parameters are identified through a specific screening strategy. The results demonstrate that, compared with existing parameter optimization methods based on the FSMFEH mathematical model, the proposed method efficiently identifies optimal structural parameters under varying external magnetic field conditions, with convergence achieved within 60 iterations and computational time limited to 50 seconds. The method exhibits strong generalizability and high computational efficiency.
- 7 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessParameter Optimization Method for the Free-Standing Magnetic Field Energy Harvester Based on an Improved Multi-Objective Particle Swarm Optimization Algorithm
The free-standing magnetic field energy harvester (FSMFEH) is an effective solution to the power supply challenge for large-scale sensor networks, owing to its flexible installation and broad applicability. Structural parameter optimization is essential to enhance the power density of the FSMFEH. However, existing parameter optimization methods based on the FSMFEH mathematical model neglect the interdependencies among parameters, hindering efficient identification of optimal solutions and exhibiting strong subjectivity and limited generalizability. Therefore, a novel parameter optimization method for the FSMFEH based on an improved multi-objective particle swarm optimization (MOPSO) algorithm is proposed. First, the output power and power density models of the FSMFEH considering the magnetic core saturation characteristics are derived, and a multi-objective parameter optimization model corresponding to the FSMFEH parameter optimization problem is formulated. Second, an improved MOPSO algorithm is developed based on a control parameter optimization strategy to enhance convergence and search accuracy. Finally, the improved MOPSO algorithm is employed to solve the FSMFEH parameter optimization problem, and the optimal structural parameters are identified through a specific screening strategy. The results demonstrate that, compared with existing parameter optimization methods based on the FSMFEH mathematical model, the proposed method efficiently identifies optimal structural parameters under varying external magnetic field conditions, with convergence achieved within 60 iterations and computational time limited to 50 seconds. The method exhibits strong generalizability and high computational efficiency.
- 25 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (9) , 14014-14026
Modeling and Optimized Design of the Free-Standing Magnetic Field Energy Harvester Based on Accurate Estimation of Effective Permeability
Free-standing magnetic field energy harvesters (FSMFEHs) offer a novel approach for powering sensors in the power IoT. A mathematical model is established in this article to provide a generalized design tool for the FSMFEH. An accurate estimation method for the effective permeability of the H-shaped core is proposed based on the effective permeability of the cylindrical core and flux continuity theorem, along with a correction term, to enhance the model's accuracy. Experimental results show that estimation errors are less than 8%. Based on this model, an effective performance optimization method for the FSMFEH is summarized. Especially, the differences in maximum power and maximum power density, and the impact of induced voltage on the power management circuit, are considered. In addition, utilizing the Steinmetz equation, it is found that the magnetic field generated by the coil current, rather than the external magnetic field, is the predominant factor leading to core losses. The optimized FSMFEH attains a power density of 2.28 mW/cm3 at an external magnetic field of 1 500 μT/50 Hz. Applying this performance optimization method to existing studies, the maximum power density is increased by more than 3.02 times compared to the original results with the same external magnetic field and dimensions.
- 25 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (9) , 14014-14026
Modeling and Optimized Design of the Free-Standing Magnetic Field Energy Harvester Based on Accurate Estimation of Effective Permeability
Free-standing magnetic field energy harvesters (FSMFEHs) offer a novel approach for powering sensors in the power IoT. A mathematical model is established in this article to provide a generalized design tool for the FSMFEH. An accurate estimation method for the effective permeability of the H-shaped core is proposed based on the effective permeability of the cylindrical core and flux continuity theorem, along with a correction term, to enhance the model's accuracy. Experimental results show that estimation errors are less than 8%. Based on this model, an effective performance optimization method for the FSMFEH is summarized. Especially, the differences in maximum power and maximum power density, and the impact of induced voltage on the power management circuit, are considered. In addition, utilizing the Steinmetz equation, it is found that the magnetic field generated by the coil current, rather than the external magnetic field, is the predominant factor leading to core losses. The optimized FSMFEH attains a power density of 2.28 mW/cm3 at an external magnetic field of 1 500 μT/50 Hz. Applying this performance optimization method to existing studies, the maximum power density is increased by more than 3.02 times compared to the original results with the same external magnetic field and dimensions.
- 11 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (7) , 10265
Corrections to “Mathematical Modeling and Optimization for the Power Density of the Free-Standing Magnetic Field Energy Harvester”
The affiliation for author “Dan Zhou” in the paper [1] was erroneously listed as including the “State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an 710049, China.”
- 11 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (7) , 10265
Corrections to “Mathematical Modeling and Optimization for the Power Density of the Free-Standing Magnetic Field Energy Harvester”
The affiliation for author “Dan Zhou” in the paper [1] was erroneously listed as including the “State Key Laboratory of Electrical Insulation and Power Equipment, Xi'an Jiaotong University, Xi'an 710049, China.”
- 28 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (3) , 4536-4545
Harmonic Magnetic Field Energy Harvesting for Self-Powered Sensors in HVDC Transmission Lines
Due to the lack of abundant alternating electric and magnetic fields, there is no efficient and stable energy harvesting method for high-voltage direct current (HVDC) transmission lines, which hinders the deployment of self-powered sensors. The finite switching frequency of electronic devices results in the coexistence of DC and harmonic currents in HVDC transmission lines. In this work, a novel method for harvesting harmonic magnetic field energy is proposed for the first time utilizing a free-standing magnetic field energy harvester (FSMFEH). Compared with current transformer-based magnetic field energy harvesters with closed toroidal cores, the designed arc-shaped core effectively avoids saturation caused by high DC currents. The AC magnetic field generated by the harmonic current induces a voltage in the coil and transfers power to the load. The working principle, equivalent circuit, load power and reliability of the FSMFEH are analyzed and experimentally verified. By optimizing the core structure and selecting the core material, the FSMFEH achieves a load power of 25.79mW and a power density of 0.279mW/cm3 under the condition of 1000A DC current superimposed with a 3A/600Hz harmonic current. The designed FSMFEH is capable of meeting the power requirements for most sensors in HVDC transmission lines.
- 28 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (3) , 4536-4545
Harmonic Magnetic Field Energy Harvesting for Self-Powered Sensors in HVDC Transmission Lines
Due to the lack of abundant alternating electric and magnetic fields, there is no efficient and stable energy harvesting method for high-voltage direct current (HVDC) transmission lines, which hinders the deployment of self-powered sensors. The finite switching frequency of electronic devices results in the coexistence of DC and harmonic currents in HVDC transmission lines. In this work, a novel method for harvesting harmonic magnetic field energy is proposed for the first time utilizing a free-standing magnetic field energy harvester (FSMFEH). Compared with current transformer-based magnetic field energy harvesters with closed toroidal cores, the designed arc-shaped core effectively avoids saturation caused by high DC currents. The AC magnetic field generated by the harmonic current induces a voltage in the coil and transfers power to the load. The working principle, equivalent circuit, load power and reliability of the FSMFEH are analyzed and experimentally verified. By optimizing the core structure and selecting the core material, the FSMFEH achieves a load power of 25.79mW and a power density of 0.279mW/cm3 under the condition of 1000A DC current superimposed with a 3A/600Hz harmonic current. The designed FSMFEH is capable of meeting the power requirements for most sensors in HVDC transmission lines.
- 26 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (5) , 6421-6432
Mathematical Modeling and Optimization for the Power Density of the Free-Standing Magnetic Field Energy Harvester
The free-standing magnetic field energy harvester (FSMFEH) offers a potential solution for powering sensors in the power grid. However, designing the FSMFEH through finite element simulations and experiments is time-consuming and difficult to summarize generalized design guidelines. To address this issue, a mathematical model relating the power density to the coil and core parameters is developed in this article. A correction term is introduced to reflect the aggregation of the H-shaped core to the external magnetic field. The experimental results show that the model error is less than 4%. Based on this model, the core geometry, core material, coil turns, and wire radius are optimized to enhance the power density of the FSMFEH. It is found that the coil has a significant impact on the power density, which deviates from previous studies that solely focus on the core volume. The induced voltage of the coil is also considered in the optimization procedure. The optimized FSMFEH attains an output power of 6.33 mW with a magnetic field of 200 μ T/50 Hz. Compared to previous studies, the FSMFEH designed in this work can achieve high power and power density with a smaller size and weaker external magnetic field.
- 26 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (5) , 6421-6432
Mathematical Modeling and Optimization for the Power Density of the Free-Standing Magnetic Field Energy Harvester
The free-standing magnetic field energy harvester (FSMFEH) offers a potential solution for powering sensors in the power grid. However, designing the FSMFEH through finite element simulations and experiments is time-consuming and difficult to summarize generalized design guidelines. To address this issue, a mathematical model relating the power density to the coil and core parameters is developed in this article. A correction term is introduced to reflect the aggregation of the H-shaped core to the external magnetic field. The experimental results show that the model error is less than 4%. Based on this model, the core geometry, core material, coil turns, and wire radius are optimized to enhance the power density of the FSMFEH. It is found that the coil has a significant impact on the power density, which deviates from previous studies that solely focus on the core volume. The induced voltage of the coil is also considered in the optimization procedure. The optimized FSMFEH attains an output power of 6.33 mW with a magnetic field of 200 μ T/50 Hz. Compared to previous studies, the FSMFEH designed in this work can achieve high power and power density with a smaller size and weaker external magnetic field.
- 26 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (1) , 1888-1897
A Novel Method of Maximum Power Point Reaching for Magnetic Field Energy Harvesting Based on a Low-Power Analog Control Circuit
Magnetic field energy harvester (MEH) based on current transformers has emerged as a promising method for powering mass sensors in smart grids. However, a significant challenge lies in the insufficient power harvested at low primary currents. Aiming at resolving this shortcoming, a novel maximum power point reaching method based on a low-power analog control circuit is proposed in the present study. The main objective of this method is to improve the performance of the MEH. The maximum power point is achieved by controlling the voltage of the DC side of the rectifier bridge based on the optimal load voltage characteristics of the MEH. The analog control circuit is designed using low-power analog devices and megaohm-level resistors, eliminating the need for a microcontroller. The performed analyses revealed that the calculated maximum power loss of the proposed approach is only 81.81 μW. Experimental results demonstrate a remarkable increase in MEH power output ranging from 101.39% to 149.89% compared to commercial circuits at currents ranging from 1A to 10A.
- 26 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (1) , 1888-1897
A Novel Method of Maximum Power Point Reaching for Magnetic Field Energy Harvesting Based on a Low-Power Analog Control Circuit
Magnetic field energy harvester (MEH) based on current transformers has emerged as a promising method for powering mass sensors in smart grids. However, a significant challenge lies in the insufficient power harvested at low primary currents. Aiming at resolving this shortcoming, a novel maximum power point reaching method based on a low-power analog control circuit is proposed in the present study. The main objective of this method is to improve the performance of the MEH. The maximum power point is achieved by controlling the voltage of the DC side of the rectifier bridge based on the optimal load voltage characteristics of the MEH. The analog control circuit is designed using low-power analog devices and megaohm-level resistors, eliminating the need for a microcontroller. The performed analyses revealed that the calculated maximum power loss of the proposed approach is only 81.81 μW. Experimental results demonstrate a remarkable increase in MEH power output ranging from 101.39% to 149.89% compared to commercial circuits at currents ranging from 1A to 10A.
- 11 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 70 (3) , 2586-2595
A Novel Method for Magnetic Energy Harvesting Based on Capacitive Energy Storage and Core Saturation Modulation
In this article, the magnetic energy harvester (MEH) based on the current transformer is an innovative method to provide a potential solution for the power supply of sensor networks. Due to the current fluctuation and nonlinearity of the core, the harvester may produce insufficient power at low primary currents, while the core saturates at high primary currents. Aiming at resolving this problem, a novel method is proposed to improve the performance of MEH. In this method, a capacitor and two switches are used to store energy and modulate the core saturation. The performed analyses demonstrate that the proposed method enhances the harvested power under different primary current and load conditions. This is especially more pronounced at low primary currents and loads. It is found that for a low primary current of 2 A rms at 50 Hz, the harvested power increases by 206%. Moreover, applying this method can also reduce the load voltage by controlling the alternating on–off of the switches, thereby protecting the harvester in case of high primary currents. The theoretical calculation, circuit simulation, and experimental results demonstrate the effectiveness of this method.
- 11 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 70 (3) , 2586-2595
A Novel Method for Magnetic Energy Harvesting Based on Capacitive Energy Storage and Core Saturation Modulation
In this article, the magnetic energy harvester (MEH) based on the current transformer is an innovative method to provide a potential solution for the power supply of sensor networks. Due to the current fluctuation and nonlinearity of the core, the harvester may produce insufficient power at low primary currents, while the core saturates at high primary currents. Aiming at resolving this problem, a novel method is proposed to improve the performance of MEH. In this method, a capacitor and two switches are used to store energy and modulate the core saturation. The performed analyses demonstrate that the proposed method enhances the harvested power under different primary current and load conditions. This is especially more pronounced at low primary currents and loads. It is found that for a low primary current of 2 A rms at 50 Hz, the harvested power increases by 206%. Moreover, applying this method can also reduce the load voltage by controlling the alternating on–off of the switches, thereby protecting the harvester in case of high primary currents. The theoretical calculation, circuit simulation, and experimental results demonstrate the effectiveness of this method.