Mingjiang Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mingjiang Wang has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Xiao Jia
School of Automation and Intelligence, Beijing Jiaotong University, Beijing, China
6 shared publications - Qiujun Wang
School of Geoscience, Hebei Geo University, Shijiazhuang, China
4 shared publications - Kun Liang
School of Automation and Intelligence, Beijing Jiaotong University, Beijing 100044, China
3 shared publications - Xunwang Dang
National Key Laboratory of Scattering and Radiation, Beijing, China
3 shared publications Xiaotian Pan
Beijing Institute of Radio Measurement, Beijing, China
2 shared publications- Yinghong Wen
Electromagnetic Compatibility Laboratory, School of Electronic and Information Engineering, Beijing Jiaotong University, Beijing, China
2 shared publications
Latest Publications
- 23 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (10) , 3415-3419
Efficient Reflectarray Analysis Using Dispersive Debye FDTD and Surface Susceptibility Model
This study presents a method for efficiently computing the scattering of reflect-arrays using equivalent homogenization parameters. The approach employs the surface susceptibility model (SSM), a parametric model of metasurfaces, alongside rational fitting techniques, the Debye model, and finite-difference time-domain (FDTD) analysis. This combination enables accurate estimation of the scattered fields from reflect-arrays, achieving results comparable to full-wave analysis. Unlike related publications, this study addresses three limitations of prior methods: 1) focus on real arrays instead of virtual surfaces; 2) incorporation of both electric and magnetic parameters; and 3) simplified Debye-based implementation compared to Lorentz models.
- 23 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (10) , 3415-3419
Efficient Reflectarray Analysis Using Dispersive Debye FDTD and Surface Susceptibility Model
This study presents a method for efficiently computing the scattering of reflect-arrays using equivalent homogenization parameters. The approach employs the surface susceptibility model (SSM), a parametric model of metasurfaces, alongside rational fitting techniques, the Debye model, and finite-difference time-domain (FDTD) analysis. This combination enables accurate estimation of the scattered fields from reflect-arrays, achieving results comparable to full-wave analysis. Unlike related publications, this study addresses three limitations of prior methods: 1) focus on real arrays instead of virtual surfaces; 2) incorporation of both electric and magnetic parameters; and 3) simplified Debye-based implementation compared to Lorentz models.
- 11 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (8) , 13673-13684
Recognition, Reconstruction, and Suppression of Range Overlapped Ghost Target Based on Dual Receiving Channels for LFMCW Radar
Linear frequency modulated continuous wave (LFMCW) radar has extensive applications in air defense and target measurements. Due to the rapid development of electronic countermeasures (ECM) and the growing number of radars in autonomous driving, the indistinguishable ghost target interference has become an increasingly critical challenge for LFMCW radar. Under conditions of intensive interference or dense targets, the ghost target may overlap with real targets, leading to erroneous detections. This study investigates the methods of recognizing, reconstructing, and suppressing interference when the ghost target overlaps with real targets in range. Firstly, this work suggests a dual receiving channels scheme based on inter-pulse phase coding to distinguish the aliased ghost target. By modulating the initial phase of the transmitted pulse, decoding and undecoding the received pulse phases, the real and ghost targets can be compressed separately in different receiving channels. Furthermore, to efficiently differentiate the aliased ghost target from real targets, this paper develops a ghost target recognition strategy based on the statistical parameters of the Doppler signal in each range gate. More importantly, to further suppress the aliased ghost target, this work additionally proposes an interference reconstruction and suppression scheme in range and Doppler (RD) domain. These proposed strategies can exactly identify, reconstruct, and eliminate the aliased interfering signals while preserving the desired signals of real targets. Finally, the effectiveness and performance of these proposed schemes are explicitly examined by experimental tests.
- 11 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 25 (8) , 13673-13684
Recognition, Reconstruction, and Suppression of Range Overlapped Ghost Target Based on Dual Receiving Channels for LFMCW Radar
Linear frequency modulated continuous wave (LFMCW) radar has extensive applications in air defense and target measurements. Due to the rapid development of electronic countermeasures (ECM) and the growing number of radars in autonomous driving, the indistinguishable ghost target interference has become an increasingly critical challenge for LFMCW radar. Under conditions of intensive interference or dense targets, the ghost target may overlap with real targets, leading to erroneous detections. This study investigates the methods of recognizing, reconstructing, and suppressing interference when the ghost target overlaps with real targets in range. Firstly, this work suggests a dual receiving channels scheme based on inter-pulse phase coding to distinguish the aliased ghost target. By modulating the initial phase of the transmitted pulse, decoding and undecoding the received pulse phases, the real and ghost targets can be compressed separately in different receiving channels. Furthermore, to efficiently differentiate the aliased ghost target from real targets, this paper develops a ghost target recognition strategy based on the statistical parameters of the Doppler signal in each range gate. More importantly, to further suppress the aliased ghost target, this work additionally proposes an interference reconstruction and suppression scheme in range and Doppler (RD) domain. These proposed strategies can exactly identify, reconstruct, and eliminate the aliased interfering signals while preserving the desired signals of real targets. Finally, the effectiveness and performance of these proposed schemes are explicitly examined by experimental tests.
- 11 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (1) , 671-676
GO/PO With Surface Susceptibility Model for Multiple Scattering Analysis of Targets Involving Metasurfaces
This study introduces an approach to analyzing multiple scattering of targets involving realistic metasurfaces. The method utilizes the surface susceptibility model (SSM), a parametric model of metasurfaces, in conjunction with geometrical optics (GO) and physical optics (PO). The study showcases that through the utilization of this technique, targets comprised of metasurfaces can be accurately and efficiently analyzed on standard computers. This level of precision and efficiency is challenging to achieve with traditional GO/PO and brute-force analysis methods, making this approach particularly beneficial for large systems where metasurfaces are a component of the scattering analysis. To test the accuracy, flexibility, and performance in scenarios involving multi-scattering, a uniform array, a gradient array, and a dihedral corner reflector constructed from two metasurface arrays are evaluated. The results are validated using commercial software for both the s (or TE) and p (or TM) polarization, confirming the high efficiency and flexibility of the proposed method.
- 11 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (1) , 671-676
GO/PO With Surface Susceptibility Model for Multiple Scattering Analysis of Targets Involving Metasurfaces
This study introduces an approach to analyzing multiple scattering of targets involving realistic metasurfaces. The method utilizes the surface susceptibility model (SSM), a parametric model of metasurfaces, in conjunction with geometrical optics (GO) and physical optics (PO). The study showcases that through the utilization of this technique, targets comprised of metasurfaces can be accurately and efficiently analyzed on standard computers. This level of precision and efficiency is challenging to achieve with traditional GO/PO and brute-force analysis methods, making this approach particularly beneficial for large systems where metasurfaces are a component of the scattering analysis. To test the accuracy, flexibility, and performance in scenarios involving multi-scattering, a uniform array, a gradient array, and a dihedral corner reflector constructed from two metasurface arrays are evaluated. The results are validated using commercial software for both the s (or TE) and p (or TM) polarization, confirming the high efficiency and flexibility of the proposed method.
- 28 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-11
Demonstration on Range and Doppler Spread of Ghost Target in Automotive LFMCW Radar
Ghost target is one of the most challenging interferences for linear frequency modulated continuous wave (LFMCW) radar in automotive driving. Generally, the spectrum of ghost target was hypothetically considered as a spike in range and Doppler (RD) image, which is extremely similar to those of real targets. Nevertheless, due to the technical restrictions of adopted devices, there are substantial distinctions between the theoretical model and the real features of ghost targets in practical systems. This work investigates the realistic characteristics of ghost target and demonstrates the spectrum spread of ghost targets in real systems. First, the hypothetical signal model of ghost target is analyzed, and the distinctions between the theoretical model and the realistic features of ghost target are revealed. Additionally, the mechanisms of the range spread and migration of ghost target introduced by the relative offset of chirp rate and the clock drift between two interactional radars are investigated. Moreover, the boundaries of the range spread and migration of ghost target are explicitly demonstrated. Finally, simulations and experiments with real automotive radars verify the spectrum spread of ghost target. These demonstrations will provide substantial principles for robust system designs and offer instructive insights for more efficient suppression of ghost targets in real automotive radars.
- 28 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-11
Demonstration on Range and Doppler Spread of Ghost Target in Automotive LFMCW Radar
Ghost target is one of the most challenging interferences for linear frequency modulated continuous wave (LFMCW) radar in automotive driving. Generally, the spectrum of ghost target was hypothetically considered as a spike in range and Doppler (RD) image, which is extremely similar to those of real targets. Nevertheless, due to the technical restrictions of adopted devices, there are substantial distinctions between the theoretical model and the real features of ghost targets in practical systems. This work investigates the realistic characteristics of ghost target and demonstrates the spectrum spread of ghost targets in real systems. First, the hypothetical signal model of ghost target is analyzed, and the distinctions between the theoretical model and the realistic features of ghost target are revealed. Additionally, the mechanisms of the range spread and migration of ghost target introduced by the relative offset of chirp rate and the clock drift between two interactional radars are investigated. Moreover, the boundaries of the range spread and migration of ghost target are explicitly demonstrated. Finally, simulations and experiments with real automotive radars verify the spectrum spread of ghost target. These demonstrations will provide substantial principles for robust system designs and offer instructive insights for more efficient suppression of ghost targets in real automotive radars.
- 25 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-11
A Fast and Accurate Frequency Estimator for Complex Single-Tone Signal Based on DFT Interpolation
Frequency measurements for complex single-tone signals under additive Gaussian noise cover extensive engineering fields. Existing direct discrete Fourier transform (DFT) interpolation methods suffer both degraded accuracies under noisy conditions and biased estimation performances for a restricted number of samples. To address these problems, this paper proposes a fast and accurate frequency estimation scheme using two-sample DFT interpolation. Firstly, this work introduces a frequency deviation detector that can exactly recognize the interpolation direction. Additionally, to correct the estimation biases of existing direct estimators, this paper further develops an unbiased and extremely accurate estimator for an arbitrary number of samples. Finally, a fast and accurate frequency estimation scheme is proposed based on the developed detector and estimator. Results of tests indicate that the proposed scheme exhibits good noise tolerance and can provide exact bias corrections for small and medium numbers of samples. The proposed strategy can provide superior precision and serve as an efficient frequency estimation scheme in various engineering fields.
- 25 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-11
A Fast and Accurate Frequency Estimator for Complex Single-Tone Signal Based on DFT Interpolation
Frequency measurements for complex single-tone signals under additive Gaussian noise cover extensive engineering fields. Existing direct discrete Fourier transform (DFT) interpolation methods suffer both degraded accuracies under noisy conditions and biased estimation performances for a restricted number of samples. To address these problems, this paper proposes a fast and accurate frequency estimation scheme using two-sample DFT interpolation. Firstly, this work introduces a frequency deviation detector that can exactly recognize the interpolation direction. Additionally, to correct the estimation biases of existing direct estimators, this paper further develops an unbiased and extremely accurate estimator for an arbitrary number of samples. Finally, a fast and accurate frequency estimation scheme is proposed based on the developed detector and estimator. Results of tests indicate that the proposed scheme exhibits good noise tolerance and can provide exact bias corrections for small and medium numbers of samples. The proposed strategy can provide superior precision and serve as an efficient frequency estimation scheme in various engineering fields.
- 30 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (3) , 2837-2842
Metasurfaces Design Using Primary Elements and Characteristic Models: Connection Between SSM/SPM and Circuit Quantities
This study proposes a metasurface-designing framework using a pre-established database of primary elements and characteristic models, which avoids tedious optimization during metasurface design. We adopt the Surface Susceptibility Model (SSM) and Surface Porosity Model (SPM) as primary characteristic models, and patch-like and fishnet-aperture unit-cells as primary elements. Firstly, we connect the efficient characteristic model of metasurfaces, SSM for patch-like unit-cells and SPM for fishnet-aperture unit-cells, to LC circuit components. Then, we extend the scale of SSM/SPM of the patch/fishnet-like unit-cells with a periodicity in the order of 0.1λ 0 , to establish a primary database. Finally, we design metasurfaces of various functionality by using the pre-established database of the primary elements and characteristic models with the aid of classical circuit and transmission line theories.
- 30 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (3) , 2837-2842
Metasurfaces Design Using Primary Elements and Characteristic Models: Connection Between SSM/SPM and Circuit Quantities
This study proposes a metasurface-designing framework using a pre-established database of primary elements and characteristic models, which avoids tedious optimization during metasurface design. We adopt the Surface Susceptibility Model (SSM) and Surface Porosity Model (SPM) as primary characteristic models, and patch-like and fishnet-aperture unit-cells as primary elements. Firstly, we connect the efficient characteristic model of metasurfaces, SSM for patch-like unit-cells and SPM for fishnet-aperture unit-cells, to LC circuit components. Then, we extend the scale of SSM/SPM of the patch/fishnet-like unit-cells with a periodicity in the order of 0.1λ 0 , to establish a primary database. Finally, we design metasurfaces of various functionality by using the pre-established database of the primary elements and characteristic models with the aid of classical circuit and transmission line theories.
- 24 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-11
Velocity Estimation by Two Sample DFT Interpolation and Weighted Least Square Fusion for Dual-Frequency Radar
Velocity measurements of moving targets based on radar systems have extensive applications in many engineering fields. This paper proposes an optimized velocity estimation strategy for dual-frequency radar by introducing a new DFT interpolation scheme and the fusion of the observations acquired by two receivers. Firstly, a new two sample DFT interpolation method based on a phase detector is contributed. The new interpolation method can achieve an accurate estimation for each single receiver. Additionally, a weighted least square estimation scheme is further proposed through the fusion of the observations of dual receivers. The fusion boundaries of dual receivers are investigated, and an optimized fusion strategy is finally presented. Numerical and experimental results show that the proposed strategies equip good noise resistance and outperform existing methods under various conditions.
- 24 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-11
Velocity Estimation by Two Sample DFT Interpolation and Weighted Least Square Fusion for Dual-Frequency Radar
Velocity measurements of moving targets based on radar systems have extensive applications in many engineering fields. This paper proposes an optimized velocity estimation strategy for dual-frequency radar by introducing a new DFT interpolation scheme and the fusion of the observations acquired by two receivers. Firstly, a new two sample DFT interpolation method based on a phase detector is contributed. The new interpolation method can achieve an accurate estimation for each single receiver. Additionally, a weighted least square estimation scheme is further proposed through the fusion of the observations of dual receivers. The fusion boundaries of dual receivers are investigated, and an optimized fusion strategy is finally presented. Numerical and experimental results show that the proposed strategies equip good noise resistance and outperform existing methods under various conditions.