WLWenping Li

Wenping Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wenping Li has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Water-Conducting Fractured Zone and Phreatic Water Drawdown in Large-Scale Coal Mining of Desert Bottomland, Northern Shaanxi

    by Yu Liu, Wenping Li, Qimeng Liu, Miaolin Xing, Chongyan Liu, Jingzhong Zhu

    The desert bottomland of Northern Shaanxi, China, features an ecologically fragile environment with a pronounced mismatch between abundant coal resources and scarce water resources. Large-scale coal mining often impairs the water-resisting capacity of overlying strata, leading to shallow groundwater depletion, surface drought, and vegetation degradation. This study focuses on determining the height of the water-conducting fractured zone (WCFZ) and assessing shallow groundwater loss in such ecologically sensitive mining areas. Through analysis of measured WCFZ heights, the empirical formulas currently specified in national codes are found to be inapplicable to the study area. A multi-factor nonlinear prediction model, better suited to local conditions, is therefore established using multiple nonlinear regressions. Taking the Jinjitan Coal Mine as a case study, a 3D hydrogeological conceptual model is developed using FEFLOW to simulate phreatic water responses to mining activities. The results indicate a maximum phreatic water drawdown of 3–4 m, with post-mining burial depths predominantly ranging from 5 to 8 m, reaching a warning level that requires attention and mitigation. This study provides a valuable reference for water hazard prevention and ecological protection in desert bottomland regions.


  • Open Access

    Analysis of the mechanism of roof water hazards caused by fault activation

    by Xingyu Miao, Wenping Li, Qiqing Wang, Guojie Ma, Yuchu Liu

    Fault activation is a common phenomenon during coal seam mining in proximity to faults. To better understand the mechanism of roof water hazards caused by fault activation, numerical simulation was employed. By coupling FLAC3D with PFC3D, this simulation is mainly analyzed from four aspects: the number of contact forces, the evolution of vertical displacement, the development of the plastic zone, and vertical stress. Based on field test and numerical simulation, this study reveals that fault activation becomes more intense as the working face advances from the hanging wall to the footwall of the fault. In addition, fault activation exhibits distinct phases, each characterized by different mechanical behaviors. Furthermore, combined with the decreasing trend in the number of contact forces, the height of the water-conducting fracture zone shows a pattern of initial increase followed by subsequent decrease. These findings reveal that analyzing the mechanism of roof water hazards caused by fault activation provides a theoretical basis and valuable insights for preventing and controlling roof water hazards during coal mining operations near faults.

  • Open Access

    Effects of the Quaternary aquifer water pressure on fault activation leading to roof water hazards

    by Xingyu Miao, Wenping Li, Qiqing Wang, Guojie Ma, Yuchu Liu

    Fault activation is a common phenomenon during coal seam mining in proximity to faults. Fault activation significantly exacerbates the risk of roof water hazards through multiple mechanisms. To better understand the mechanism of roof water hazards caused by fault activation, numerical simulation and physical experiments were employed. By coupling FLAC3D with PFC3D, it was demonstrated that fault activation occurs in a phased manner, essentially involving the processes of shear failure and fracture propagation. During coal mining, fault activation induces stress concentration at fault ends and a substantial increase in the height of the water-conducting fracture zone. Furthermore, the degree of fault activation positively correlates with the advance distance; more active faults exhibit greater maximum subsidence per unit advance distance. Physical experiments demonstrate that fault activation exhibits a negative correlation with the pore water pressure required based on fault dip angle and width. These findings reveal that considering the influence of Quaternary aquifer water pressure on fault activation provides a theoretical basis and valuable insights for preventing and controlling roof water hazards during coal mining operations near faults.

  • Open Access

    Application of the CPO-CNN-BILSTM Hybrid Model for Evaluation of Water Abundance of the Roof Aquifer—A Case Study of WoBei Mine in Huaibei Coalfield, China

    by Yuchu Liu, Qiqing Wang, Jingzhong Zhu, Dongding Li, Wenping Li

    With the gradual increase in coal production capacity, the problem of water damage from the coal seam roof is becoming more and more prominent. Neogene loose strata overlie coal seams in eastern China, and pressurized aquifers commonly lie at the bottom of the loose strata. The aquifers are mainly composed of unconsolidated sand, gravel, and weakly consolidated marl, which has strong permeability and an extremely unfavorable impact on safe production. Identifying the target area to prevent and control roof water damage can reduce the likelihood of water damage accidents in mines. This study takes the 85 mining district of Wobei mine as an engineering case. The discriminant indexes are selected for aquifer thickness, gradation coefficient, marlstone thickness, permeability, grouting quantity, and grouting termination pressure. A model integrating the newly proposed Crowned Porcupine Optimization (CPO, 2024), Convolutional Neural Network (CNN), and Bidirectional Long Short-Term Memory (BiLSTM) was constructed to predict unit water influx. A zonal map was generated based on the expected unit water influx of the fourth aquifer after grouting. In addition, the prediction results are compared with those from other models. Results indicate that the CPO-CNN-BiLSTM model achieves a higher accuracy and fewer errors in water abundance prediction, with an RMSE of 2.58 × 10−5 and an R2 of 0.982 for the testing dataset. According to the prediction result, the fourth aquifer after grouting in the 85 mining district is divided into five water abundance zones. The strong and medium–strong water abundance zones are mainly distributed in the study area’s eastern region. A small portion of them is distributed in the northwestern and northern areas. This study provides a new insight for predicting the water abundance of thick loose aquifers and a theoretical basis for safe mining under thick loose aquifers.


  • Open Access

    Aquifer water yield property prediction based on a hybrid neural network model: a case of yili no.4 colliery, Xinjiang

    by Jielin Yang, Wenping Li, Jingzhong Zhu, Dongding Li

    With the gradual increase of coal production capacity, the mining-induced roof water damage has become increasingly prominent. Accurately and effectively predicting the water yield property of the roof aquifer based on the hydrogeological data is of great significance for preventing and controlling mine water damage. In this study, we select six evaluation factors, including aquifer thickness (AT), permeability coefficient (PC), coring rate (CR), rock brittleness-plasticity ratio (RBPR), equivalent thickness of sandstone (ETS), and fold undulation (FU). A hybrid model is proposed, integrating the convolutional neural networks (CNN) with long short-term memory (LSTM) optimized by the Attention module to improve the model’s performance. The model is applied to predict the water yield property of the Paleocene aquifer in the Yili No. 4 colliery by collecting 100 hydrogeological datasets. The model is trained to predict the unit water inflow (UWI) of the roof aquifer, reflecting the water yield property. Besides, comparative analysis with the CNN, LSTM, and the CNN-LSTM models demonstrates that the prediction performance of the CNN-LSTM-Attention model outperforms the three contrastive models. The CNN-LSTM-Attention hybrid model achieves higher prediction accuracy. This study proposes a scientifically robust evaluation method for delineating WYPZ in mining areas with limited hydrogeological exploration data.


  • Open Access

    An Improved Back Propagation Neural Network Based on Differential Evolution and Grey Wolf Optimizer and Its Application in the Height Prediction of Water-Conducting Fracture Zone

    by Houzhu Wang, Jingzhong Zhu, Wenping Li

    Given that the conventional back propagation neural network (BPNN) easily falls into the local optimal solutions, resulting in poor prediction accuracy, an improved BPNN based on the differential evolution and grey wolf optimizer (DEGWO) is proposed, the so-called DEGWO-BPNN. The prediction of the water-conducting fracture zone (WCFZ) height is significant for mine safety operations. A total of 104 sample data are trained and 25 sample data are tested to identify the optimal prediction model. Five evaluation indexes are selected to assess the prediction performance of the models quantitatively. Finally, the DEGWO-BPNN model is applied to a specific engineering case. The main conclusions are as follows: (1) Mining height, mining depth, coal seam dip, panel width, and ratio of hard rock as the main factors affecting the WCFZ height are selected. The topology structure of the model is defined as ‘5-12-1’; (2) the bias between the predicted value and the actual value of the training samples is smaller with an average error of 2.39. Test samples further validate the prediction precision through evaluation indexes. The values of MAE, RMSE, MAPE, and R2 are 2.3952, 3.4674, 5.3148%, and 0.99077, respectively. The prediction accuracy is 94.6852%; (3) ‘Mining Code’, MLR, BPNN, and GWO-BPNN models are treated as the comparison groups. The comparative analysis shows that the prediction performance of ‘Mining Code’ is the worst, while that of DEGWO-BPNN is the best, and it outperforms other algorithms and statistical approaches; (4) the prediction of WCFZ height in the 11601 panel is in line with the actual value. The prediction error of the DEGWO-BPNN model is lower than that of the comparison models. As such, the DEGWO-BPNN model can be well applied to the prediction of WCFZ height and is suitable for coal mines with different regional geological conditions. It can provide a valuable reference for mine safety operations.


  • Open Access

    Hydrogeochemical evolution and processes based on multivariable statistical and inverse simulation modeling: A coal mine in the Northern Coalfield, China

    by Jingzhong Zhu, Wenping Li, Baoxin Zhao, Qilin Jiang

    Considering groundwater from the aquifers overlying the bedrock is an important water source for drinking purposes. As such, the investigation of its property is essential. Based on the spatial structure of aquifers in the study area, the aquifers in the Cenozoic strata are divided into three groups. The multivariate statistical approaches are employed to identify the hydrogeochemical processes and hydro-chemical types, and hydrogeochemical inverse modeling is applied to further validate and elucidate the hydrogeochemical process and water–rock interaction. The results are as follows: (1) The hydro-chemical type of the upper aquifer is dominated by the K + Na-HCO3 type, while others have similar water quality types, which are dominated by the K + Na-Cl type and the K + Na-SO4 type. (2) The saturation index of anhydrite, gypsum, halite, and CO2(g) is below zero in three aquifers, indicating that they are unsaturated. While aragonite, calcite, and dolomite in the middle aquifer remain in the unsaturated–saturated state. (3) The cation exchange process accelerating the reduction of Ca2+ concentration and the increase of SO42− concentration occurs in three aquifers, and the dissolution of calcite and dolomite minerals occurs in most cases. This study supports the fundamental evidence for the hydrogeochemical processes and water resource utilization and has a certain practical significance.


  • Open Access

    Overburden failure and water–sand mixture outburst conditions of weakly consolidated overlying strata in Dananhu No.7 coal mine

    by Jingzhong Zhu, Wenping Li, Bo Teng, Qinggang Lu, Dongding Li, Liangning Li

    This study presents a case of weakly consolidated strata developed in Dananhu No.7 coal mine. Using a combination of numerical simulation, field measurement comparison, and the critical hydraulic gradient criterion, we investigate the overburden failure and the risk possibility of water–sand mixture inrush during excavation. The following are the principal findings: (1) Weakly consolidated rocks have poor physical characteristics, particularly when they are mudded and disintegrated after encountering water, which may become a favorable source of water–sand inrush; (2) The water-conducting zone develops to a height of 160.5 m with a crack-mining ratio of 15.29 times, extending upward to Toutunhe Formation aquifer. The predictions are consistent with measurements in adjacent mines with similar geological conditions; (3) Cracks without larger subsidence are developed at the front edge of the mining direction, and some parallel stepped cracks behind the goaf could be easily observed. Ground subsidence along the goaf center finally displays a symmetrically wide-gentle U shape; (4) The critical hydraulic gradient of Toutunhe Formation aquifer, aquifer above 3# coal seam, and aquifer of 3#–7# coal seam in Xishanyao Formation is 1.314, 1.351, and 1.380, the actual value is 0.692, 2.089, and 7.418 accordingly. It is inferred water–sand mixture outburst will not occur in Toutunhe Formation aquifer, while the potential risk exists in the aquifers of Xishanyao Formation. Through drainage and depressurization projects, a water–sand mixture outburst accident does not occur during excavation. This study reveals the overburden failure characteristics and the initiation mechanism of water–sand inrush in weakly cemented strata, as well as the internal relationship between them, which provides new research ideas for safe operation in other mining areas with similar geological conditions. The research work has certain practical guiding significance.