Vladyslav Tenesesku
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vladyslav Tenesesku has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Petro Reznik
O.M. Beketov National University of Urban Economy in Kharkiv
5 shared publications - Anton Volodymyrov
O.M. Beketov National University of Urban Economy in Kharkiv
2 shared publications - Dzhamaldii Alataiev
O.M.Beketov National University of Urban Economy in Kharkiv
2 shared publications - Oleksii Buldakov
O.M.Beketov National University of Urban Economy in Kharkiv
2 shared publications - Olena Lugchenko
O.M. Beketov National University of Urban Economy in Kharkiv
2 shared publications - Olena Petrova
O.M. Beketov National University of Urban Economy in Kharkiv
2 shared publications
Latest Publications
- 28 August 2026
- Published by Springer Nature
- p. 504-517
Experimental and Numerical Assessment of Full-Scale Reinforced 3D-Printed Concrete T-Beams
- 28 August 2026
- Published by Springer Nature
- p. 504-517
Experimental and Numerical Assessment of Full-Scale Reinforced 3D-Printed Concrete T-Beams
- 30 November 2025
- Published by Kyiv National University of Construction and Architecture in Building constructions. Theory and Practice
- No. 17
Technological aspects of fabricating a reinforced concrete shell using 3D concrete printing
The article focuses on the technological aspects of fabricating a reinforced concrete shell using concrete 3D printing combined with polystyrene formwork. A comprehensive literature review was conducted to analyze recent advancements in additive manufacturing methods for shell structures, with a particular emphasis on the development and application of flexible and stay-in-place formwork systems. A step-by-step manufacturing procedure for the test shell element was implemented, including the generation of a digital parametric model, followed by the fabrication of a custom polystyrene mold. The mold was assembled using layered foam sheets, which were cut according to pre-defined templates, bonded using adhesives, and manually refined to ensure geometric accuracy. The digital model was processed in CAD software and converted into a format suitable for slicing. The slicing operation was performed to define the layer height, printing path, and tool trajectories. Based on the generated G-code, a robotic concrete printer (console-type, “UTU 3D”) was employed to execute the additive layering process. The concrete was deposited layer-by-layer on the pre-installed polystyrene form, beginning from the bottom ring, which was reinforced with embedded steel bars to accommodate lifting hooks. A thixotropic concrete mix was used to maintain the stability of each deposited layer and to prevent slippage on the curved surface of the mold. Short pauses between layers were introduced to manage curing and maintain interlayer bonding. The finished shell was allowed to cure under ambient conditions until the desired structural strength was achieved. The study confirmed the feasibility and efficiency of combining foam-based formwork and 3D printing for creating thin-walled curved concrete structures, offering significant potential for use in both experimental and industrial-scale applications in the construction industry. Further research is aimed at conducting full-scale tests of the shell under the action of quasi-uniform static loading in order to determine the bearing capacity and deformability of the structure.
- 30 November 2025
- Published by Kyiv National University of Construction and Architecture in Building constructions. Theory and Practice
- No. 17
Technological aspects of fabricating a reinforced concrete shell using 3D concrete printing
The article focuses on the technological aspects of fabricating a reinforced concrete shell using concrete 3D printing combined with polystyrene formwork. A comprehensive literature review was conducted to analyze recent advancements in additive manufacturing methods for shell structures, with a particular emphasis on the development and application of flexible and stay-in-place formwork systems. A step-by-step manufacturing procedure for the test shell element was implemented, including the generation of a digital parametric model, followed by the fabrication of a custom polystyrene mold. The mold was assembled using layered foam sheets, which were cut according to pre-defined templates, bonded using adhesives, and manually refined to ensure geometric accuracy. The digital model was processed in CAD software and converted into a format suitable for slicing. The slicing operation was performed to define the layer height, printing path, and tool trajectories. Based on the generated G-code, a robotic concrete printer (console-type, “UTU 3D”) was employed to execute the additive layering process. The concrete was deposited layer-by-layer on the pre-installed polystyrene form, beginning from the bottom ring, which was reinforced with embedded steel bars to accommodate lifting hooks. A thixotropic concrete mix was used to maintain the stability of each deposited layer and to prevent slippage on the curved surface of the mold. Short pauses between layers were introduced to manage curing and maintain interlayer bonding. The finished shell was allowed to cure under ambient conditions until the desired structural strength was achieved. The study confirmed the feasibility and efficiency of combining foam-based formwork and 3D printing for creating thin-walled curved concrete structures, offering significant potential for use in both experimental and industrial-scale applications in the construction industry. Further research is aimed at conducting full-scale tests of the shell under the action of quasi-uniform static loading in order to determine the bearing capacity and deformability of the structure.
- 1 October 2025
- Published by Springer Nature
- p. 380-389
Structural Use of Laminated Glass in Grid Shells
- 1 October 2025
- Published by Springer Nature
- p. 380-389
Structural Use of Laminated Glass in Grid Shells
- 1 October 2025
- Published by Springer Nature
- p. 254-265
Numerical Analysis of 3D-Printed Permanent Formwork in Multi-story Building Construction
- 1 October 2025
- Published by Springer Nature
- p. 254-265
Numerical Analysis of 3D-Printed Permanent Formwork in Multi-story Building Construction
- Open Access
- 1 July 2025
- Published by Ukrainian State University of Railway Transport in Collection of scientific works of the Ukrainian State University of Railway Transport
- No. 212,p. 82-100
NUMERICAL ANALYSIS OF 3D PRINTED PERMANENT FORMWORK FOR REINFORCED CONCRETE
This study explores the structural viability of 3D-printed permanent formwork for reinforced concrete beams, focusing on their integration into construction systems. The research addresses the urgent need for innovative reconstruction solutions for large-panel buildings (LPS) in post-war Ukraine, emphasizing the limitations of traditional methods and the transformative potential of 3D Concrete Printing (3DCP) technology. A numerical analysis of 32 beam configurations with varying reinforcement schemes was conducted to evaluate their load-bearing capacity, stiffness, and stress distribution. The findings highlight that incorporating 3DCP formwork with moderate reinforcement increases load-bearing capacity by up to 77 %, while enhanced reinforcement configurations achieve improvements of up to 177 %. Beams with 3DCP formwork demonstrate significant stiffness enhancements, with only a 15% increase in deflection under 76.8 % higher loads compared to conventional beams. However, stress concentrations in the formwork exceeded allowable tensile limits, underscoring the need for additional reinforcement in critical areas to prevent failure. This study underscores the practicality of 3DCP technology for structural applications, offering improvements in material efficiency, construction speed, and sustainability. The integration of digital fabrication and advanced structural design presents a robust framework for future applications in post-war reconstruction and beyond. Further experimental validation and optimization are required to address identified limitations and refine the proposed systems.
- 1 July 2025
- Published by Ukrainian State University of Railway Transport in Collection of scientific works of the Ukrainian State University of Railway Transport
- No. 212,p. 82-100
Open AccessNUMERICAL ANALYSIS OF 3D PRINTED PERMANENT FORMWORK FOR REINFORCED CONCRETE
This study explores the structural viability of 3D-printed permanent formwork for reinforced concrete beams, focusing on their integration into construction systems. The research addresses the urgent need for innovative reconstruction solutions for large-panel buildings (LPS) in post-war Ukraine, emphasizing the limitations of traditional methods and the transformative potential of 3D Concrete Printing (3DCP) technology. A numerical analysis of 32 beam configurations with varying reinforcement schemes was conducted to evaluate their load-bearing capacity, stiffness, and stress distribution. The findings highlight that incorporating 3DCP formwork with moderate reinforcement increases load-bearing capacity by up to 77 %, while enhanced reinforcement configurations achieve improvements of up to 177 %. Beams with 3DCP formwork demonstrate significant stiffness enhancements, with only a 15% increase in deflection under 76.8 % higher loads compared to conventional beams. However, stress concentrations in the formwork exceeded allowable tensile limits, underscoring the need for additional reinforcement in critical areas to prevent failure. This study underscores the practicality of 3DCP technology for structural applications, offering improvements in material efficiency, construction speed, and sustainability. The integration of digital fabrication and advanced structural design presents a robust framework for future applications in post-war reconstruction and beyond. Further experimental validation and optimization are required to address identified limitations and refine the proposed systems.
- 9 December 2023
- Published by Springer Nature
- p. 161-172
Numerical Verification of the Positive Gaussian Curvature Shell Topological Optimization Approach
- 9 December 2023
- Published by Springer Nature
- p. 161-172
Numerical Verification of the Positive Gaussian Curvature Shell Topological Optimization Approach
- Open Access
- 30 September 2022
- Published by Ukrainian State University of Railway Transport in Collection of scientific works of the Ukrainian State University of Railway Transport
- No. 201,p. 41-56
ANALYSIS OF CONSTRUCTIVE SOLUTIONS OF THE EXISTING BUILDINGS OF THE HOUSING FUND OF THE KHARKIV CITY ON THE SUBJECT OF THEIR PERFORMANCE AS A CONSEQUENCE OF THE INFLUENCE OF COMBAT ACTIONS
The article examines the main structural solutions of existing residential buildings inthe city of Kharkiv and analyzes their working capacity from the point of view of resistance toexplosive effects and, as a result, progressive collapse. It is known that progressive collapse ischaracteristic of extreme (emergency) cases, when due to destruction of a responsible element of thestructure as a result of a gas explosion, ammunition bursts, climatic cataclysms, transport collapses,etc a part of the building or the entire structure collapses. It is noted that every year, the interest ofthe world scientific community in the issues of progressive collapse is growing, because,unfortunately, the number of cases of avalanche-like collapse of buildings of various types isincreasing. This was facilitated by already known cases of collapses of various objects, such as theRonan Point residential building (Great Britain) in 1968 or the buildings of the World Trade Center(USA) in 2011, or the very recent case of the collapse of a residential building in Surfside (USA) in2021. At the same time, it is noted that domestic regulations do not yet specify the methodology forcalculating buildings before progressive collapse, and the existing methods of experimental andnumerical analysis still need to be refined. Unfortunately, the list of such objects is increasing, andtoday, Ukraine has added to it numerous destroyed buildings as a result of ongoing hostilities on itsterritory. Therefore, for our country in the current conditions, the issue of ensuring the future stability of all buildings, and in particular, the housing stock against progressive collapse, is an urgent issue.On the basis of the analysis of the constructive solutions of the housing development in the city ofKharkiv, the type of buildings that, according to the authors of the article, has the greatest resource,is singled out, and brief recommendations are given for its increase in the future.
- 30 September 2022
- Published by Ukrainian State University of Railway Transport in Collection of scientific works of the Ukrainian State University of Railway Transport
- No. 201,p. 41-56
Open AccessANALYSIS OF CONSTRUCTIVE SOLUTIONS OF THE EXISTING BUILDINGS OF THE HOUSING FUND OF THE KHARKIV CITY ON THE SUBJECT OF THEIR PERFORMANCE AS A CONSEQUENCE OF THE INFLUENCE OF COMBAT ACTIONS
The article examines the main structural solutions of existing residential buildings inthe city of Kharkiv and analyzes their working capacity from the point of view of resistance toexplosive effects and, as a result, progressive collapse. It is known that progressive collapse ischaracteristic of extreme (emergency) cases, when due to destruction of a responsible element of thestructure as a result of a gas explosion, ammunition bursts, climatic cataclysms, transport collapses,etc a part of the building or the entire structure collapses. It is noted that every year, the interest ofthe world scientific community in the issues of progressive collapse is growing, because,unfortunately, the number of cases of avalanche-like collapse of buildings of various types isincreasing. This was facilitated by already known cases of collapses of various objects, such as theRonan Point residential building (Great Britain) in 1968 or the buildings of the World Trade Center(USA) in 2011, or the very recent case of the collapse of a residential building in Surfside (USA) in2021. At the same time, it is noted that domestic regulations do not yet specify the methodology forcalculating buildings before progressive collapse, and the existing methods of experimental andnumerical analysis still need to be refined. Unfortunately, the list of such objects is increasing, andtoday, Ukraine has added to it numerous destroyed buildings as a result of ongoing hostilities on itsterritory. Therefore, for our country in the current conditions, the issue of ensuring the future stability of all buildings, and in particular, the housing stock against progressive collapse, is an urgent issue.On the basis of the analysis of the constructive solutions of the housing development in the city ofKharkiv, the type of buildings that, according to the authors of the article, has the greatest resource,is singled out, and brief recommendations are given for its increase in the future.