PMPedro Millan

Pedro Millan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Pedro Millan has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Study of the effect of body-in-white structural design in road vehicle dynamics

    by Pedro Millan, Benjamin Desai, Tim Cowlam, Eduardo Marques, Lucas F. M. da Silva, Jorge Ambrósio


  • Open Access

    Transmissibility-based methods for damage identification on a railway bogie frame

    by J. Pagaimo, P. Millan, J. N. Costa, N. M. M. Maia, J. Ambrósio

    The bogie frame is a safety–critical component of modern railway vehicles. Consequently, railway companies periodically inspect the bogie frame to guarantee a timely damage detection. Current inspection strategies could benefit from condition monitoring during the operation using adequate sensor systems and algorithms. However, the application of methods for damage detection using the bogie frame response is still limited. This work aims to identify the sensitivity of two complementary methods based on the transmissibilities—an updated form of the transmissibility damage indicator (TDI) method and the maximum occurrences (MO) method—to detect and locate structural damage. This analysis is supported by flexible multibody simulations that provide the nominal and abnormal response of a locomotive in realistic operational conditions. This work first assesses the effect of differences in track inputs on the sensitivity of the TDI method. Both the length of acceleration signals and the number and location of sensors are analyzed, from the perspective of the damage detection capacity. The results show that the TDI method successfully detects cracks with a moderate-to-large dimension, while the MO method identifies the region where those cracks occur. The transmissibility-based methods are a reliable technique that may contribute to enhance the inspection of railway vehicles.


  • Open Access

    Transmissibility-based methods for damage identification on a railway bogie frame

    by João Pagaimo, Pedro Millan, João Neves Costa, Nuno Maia, Jorge Ambrósio

    The bogie frame is a safety-critical component of modern railway vehicles. Consequently, railway companies periodically inspect the bogie frame to guarantee a timely damage detection. Current inspection strategies could benefit from condition monitoring during the operation using adequate sensor systems and algorithms. However, the application of methods for damage detection using the bogie frame response is still limited. This work aims to identify the sensitivity of two complementary methods based on the transmissibilities – an updated form of the Transmissibility Damage Indicator (TDI) method and the Maximum Occurrences (MO) method – to detect and locate structural damage. This analysis is supported by flexible multibody simulations that provide the nominal and abnormal response of a locomotive in realistic operational conditions. This work first assesses the effect of differences in track inputs on the sensitivity of the TDI method. Both the length of acceleration signals and the number and location of sensors are analysed, from the perspective of the damage detection capacity. The results show that the TDI method successfully detects cracks with a moderate to large dimension, while the MO method identifies the region where those cracks occur. The transmissibility-based methods are a reliable technique that may contribute to enhance the inspection of railway vehicles.


  • Open Access

    Tire–road contact modelling for multibody simulations with regularised road and enhanced UA tire models

    by P. Millan, J. Ambrósio

    Multibody simulations play an important role in the study of the dynamic behaviour of road vehicles, being one of the key aspects the modelling of the tire-road interaction. The tire-road contact modelling is required to detect the contact between the tire and road and to obtain the tire contact forces from the tire-road relative motion. The first part of the problem is solved by a contact detection algorithm, whereas the second part is handled by a tire model. In both cases, the trade-off between accuracy and computational cost needs to be addressed in the road dynamics scenario. For the contact detection problem, this work proposes a methodology in which the road is described by a mesh of triangles while the tire is described by a toroid. The triangular mesh road input can be directly extracted from any CAD model. To avoid the geometric discontinuities due to the transition between triangular patches, a set of auxiliary points is used to obtain a continuous variation of the road surface normal, based on the method proposed by Rill (Multibody Syst. Dyn. 45:131–153, 2019. In the process of contact detection, all kinematic quantities required by the tire-road contact model are evaluated. The tire–road forces are evaluated using the enhanced UA tire model, which is a numerically stable and efficient development of the original tire model proposed by Gim and Nikravesh (Int. J. Veh. Des. 12, 1991; Int. J. Veh. Des. 12:19–39, 1991; Int. J. Veh. Des. 12:217–228, 1991). Both the contact and tire models have smooth transitions between their internal transitions, thereby reducing the need for the variable-step ODE integrators to unnecessarily decrease time steps. The advances on contact detection and the tire–road contact models, proposed here, are demonstrated with a set of road vehicle simulation scenarios in which the influence of various modelling parameters on the stability and efficiency of the simulations is addressed. The novelties of the work consist not only in the demonstration of the enhanced UA tire model in practical situations but also in the description of the new tire–road contact methodology that employs a simple description of the road geometry, to achieve smooth tire–road contact forces.


  • Open Access

    On the influence of joining processes on the vibration of structures

    by Pedro Millan, A.FRancisco G. Tenreiro, João D.P. Amorim, Mohammad Mehdi Kasaei, Reza Beygi, Jorge Ambrósio, Lucas F.M. da Silva


  • On the use of transmissibility for the detection of damaged springs in the primary suspension of a locomotive

    by Pedro Moreira Ordiales Millan, João Emanuel Carvalho Pagaimo, João Neves Costa, Nuno Manuel Mendes Maia, Jorge Alberto Cadete Ambrósio

    The condition monitoring of the suspensions of railway vehicles is of utmost importance, allowing the reduction of the maintenance actions and the increase in the operational safety. However, the available methods often require a simplification of the vehicle through linearised models, a high number of sensors, or the use of complex algorithms that disregard the mechanical phenomena that explain the vehicle dynamics. This work suggests the Localized Transmissibility Damage Indicator (LTDI), based on the existing Transmissibility Damage Indicator (TDI), to detect damage in the springs of a locomotive, using pairs of sensors placed in the bogie frame and the axle boxes. For that purpose, multibody simulations are used to simulate the dynamic behaviour of the vehicle in tangent tracks under nominal and damaged conditions. The results from multibody simulations allow the calculation of the LTDI values for different levels of damage and various operation conditions, as well as the study of the effect of the variability inherent to the railway operation. The results show that the LTDI is significantly sensitive to damage. However, depending on the use of the lateral or vertical response, the LTDI is more suitable to detect the stiffness increase or decrease, or even to locate the damage. In conclusion, the LTDI is a promising method for the detection of damage on suspension elements of railway vehicles.


  • Open Access

    Influence of the friction modelling decisions on the acceptance of the running behaviour of a friction-damped locomotive

    by Pedro Millan, João Pagaimo, Hugo Magalhães, Pedro Antunes, Jorge Ambrósio

    Multibody simulations are widely used for the dynamic analysis of railway vehicles, including the acceptance of vehicle running behaviour. Among these, the freight vehicles have, generally, friction damped suspensions for which numerical modelling is particularly challenging due to the contacting geometries, the intermittent contact, and the frequent stick-slip transitions. The impact of modelling decisions of friction-damped suspensions on the acceptance quantities for vehicle behaviour is the focus of this work. The selection of friction models and tuning of their parameters is challenging. In particular, the selection of friction coefficients is not straight forward, as friction conditions vary during operation and over time. This work aims to address both problems. A model of a friction-damped freight locomotive is used to simulate the dynamic response of the vehicle under realistic operation conditions and assess the impact of the friction modelling decisions. The results show that the use of different friction models provides similar results if the parameters are appropriately tuned. In contrast, the selection of friction coefficients significantly impacts the acceptance quantities, with emphasis on the wheel-rail forces at small radius curve transitions. The results recommend that the standard should include variations of the friction coefficients used for the friction-damped suspensions.