Yoshiro Nogami
Yoshiro Nogami has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Hiroki Nakata
Ebina Denka Kogyo, Co., Ltd., Tokyo 144-0033, Japan
1 shared publication - Takeshi Nasu
Ebina Denka Kogyo, Co., Ltd., Tokyo 144-0033, Japan
1 shared publication - Tatsuhiko Aizawa
Surface Engineering Design Laboratory, Shibaura Institute of Technology, Tokyo 144-0056, Japan
1 shared publication
Latest Publications
- Open Access
Robust Packaging of Vertically Aligned Graphite Substrate by Copper Micro-Rib Structuring
Vertically aligned graphite substrate (VGS)-copper packaging was renowned for improving the robustness against the thermal gradient loading by using micro texturing. The micro-groove array with a line width of 50 μm and a pitch of 100 μm was formed into the VGS by controlling the line depth with the use of fast-rate oxygen plasma etching. Three micro-grooved VGS specimens were wet-plated to fill these microgrooves with copper deposits and to cover the VGS surfaces. The nearly full-deposited VGS-Copper specimens were subjected to a severe thermal transient loading test. The simply Cu-covered package and shallow rib-structured VGS-Cu packages were damaged to delaminate at their interfaces. The VGS-Cu package with the copper rib structure with a height of 50 μm experienced no delamination. This rib-structured VGS-copper package with high rib height had sufficient robustness against the severe thermal transients even with the proof of homogeneous thermal spreading capacity.
Open AccessRobust Packaging of Vertically Aligned Graphite Substrate by Copper Micro-Rib Structuring
Vertically aligned graphite substrate (VGS)-copper packaging was renowned for improving the robustness against the thermal gradient loading by using micro texturing. The micro-groove array with a line width of 50 μm and a pitch of 100 μm was formed into the VGS by controlling the line depth with the use of fast-rate oxygen plasma etching. Three micro-grooved VGS specimens were wet-plated to fill these microgrooves with copper deposits and to cover the VGS surfaces. The nearly full-deposited VGS-Copper specimens were subjected to a severe thermal transient loading test. The simply Cu-covered package and shallow rib-structured VGS-Cu packages were damaged to delaminate at their interfaces. The VGS-Cu package with the copper rib structure with a height of 50 μm experienced no delamination. This rib-structured VGS-copper package with high rib height had sufficient robustness against the severe thermal transients even with the proof of homogeneous thermal spreading capacity.