QLQingda Li

Qingda Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qingda Li has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A deep learning-enhanced vision system for precision target spraying in chinese cabbage cultivation

    by Changxi Liu, Hang Shi, Hao Sun, Hui Zhang, Qingda Li, Jun Hu

  • Open Access

    YOLO-PINE: A Lightweight Pineapple Object Detection Method Based on an Improved YOLO11n

    by Changxi Liu, Deji Zhao, Jinbo Gao, Hang Shi, Hao Sun, Wangyu Wu, Jun Hu, Qingda Li

    Pineapple detection in complex field environments faces significant challenges, including severe background interference, frequent occlusion by sword leaves, and difficulties in identifying dense fruits, which demand an optimal balance between detection accuracy and computational efficiency for practical deployment on resource-constrained edge devices. We propose YOLO-PINE, a lightweight detection model based on an improved YOLO11n architecture incorporating three key modules: the Channel Grouping semi-convolution module (CGHalfConv) for efficient shallow feature extraction, the Circular Attention mechanism (CA) for global context modeling in the frequency domain, and the Spatial Attention Multi-scale Convolution module (SAMC) for enhanced multi-scale feature fusion. The model was trained and evaluated on a self-constructed pineapple dataset. YOLO-PINE achieved a precision of 97.2%, a recall of 92.6%, mAP@50 of 95.9%, and mAP@50–95 of 70.1%, with only 5.0 GFLOPs and 2.1 M parameters, representing a 21.9% reduction in computational load and a 16.0% decrease in parameters compared to YOLO11n. YOLO-PINE achieves a competitive balance between detection accuracy and efficiency, offering a viable visual perception solution for automated pineapple harvesting on edge devices.


  • Open Access

    An Experimental Study on the Charging Effects and Atomization Characteristics of a Two-Stage Induction-Type Electrostatic Spraying System for Aerial Plant Protection

    by Yufei Li, Qingda Li, Jun Hu, Changxi Liu, Shengxue Zhao, Wei Zhang, Yafei Wang

    To address the technical problems of broad droplet size spectrum, insufficient atomization uniformity, and spray drift in plant protection unmanned aerial vehicle (UAV) applications, this study developed a novel two-stage aerial electrostatic spraying device based on the coupled mechanisms of hydraulic atomization and electrostatic induction, and, through the integration of three-dimensional numerical simulation and additive manufacturing technology, a new two-stage inductive charging device was designed on the basis of the traditional hydrodynamic nozzle structure, and a synergistic optimization study of the charging effect and atomization characteristics was carried out systematically. With the help of a charge ratio detection system and Malvern laser particle sizer, spray pressure (0.25–0.35 MPa), charging voltage (0–16 kV), and spray height (100–1000 mm) were selected as the key parameters, and the interaction mechanism of each parameter on the droplet charge ratio (C/m) and the particle size distribution (Dv50) was analyzed through the Box–Behnken response surface experimental design. The experimental data showed that when the charge voltage was increased to 12 kV, the droplet charge-to-mass ratio reached a peak value of 1.62 mC/kg (p < 0.01), which was 83.6% higher than that of the base condition; the concentration of the particle size distribution of the charged droplets was significantly improved; charged droplets exhibited a 23.6% reduction in Dv50 (p < 0.05) within the 0–200 mm core atomization zone below the nozzle, with the coefficient of variation of volume median diameter decreasing from 28.4% to 16.7%. This study confirms that the two-stage induction structure can effectively break through the charge saturation threshold of traditional electrostatic spraying, which provides a theoretical basis and technical support for the optimal design of electrostatic spraying systems for plant protection UAVs. This technology holds broad application prospects in agricultural settings such as orchards and farmlands. It can significantly enhance the targeted deposition efficiency of pesticides, reducing drift losses and chemical usage, thereby enabling agricultural enterprises to achieve practical economic benefits, including reduced operational costs, improved pest control efficacy, and minimized environmental pollution, while generating environmental benefits.


  • Open Access

    Agricultural Electrostatic Spraying Electrode Corrosion Degradation Mechanisms: A Multi-Parameter Coupling Model

    by Yufei Li, Anni Zou, Jun Hu, Changxi Liu, Shengxue Zhao, Qingda Li, Wei Zhang, Yafei Wang

    As an innovative plant protection method in precision agriculture, electrostatic spray technology can increase the droplet coverage area by over 30% coMpared to conventional spraying. This technology not only achieves higher droplet deposition density and coverage but also enables water and pesticide savings while reducing environmental pollution. This study, combining theoretical analysis with experimental validation, reveals the critical role of electrode material selection in induction-based electrostatic spray systems. Theoretical analysis indicates that the Fermi level and work function of electrode materials fundamentally determine charge transfer efficiency, while corrosion resistance emerges as a key parameter affecting system durability. To elucidate the effects of different electrode materials on droplet charging, a coMparative study was conducted on nickel, copper, and brass electrodes in both pristine and moderately corroded states based on the corrosion classification standard, using a targeted mesh-based charge-to-mass measurement device. The results demonstrated that the nickel electrode achieved a peak charge-to-mass ratio of 1.92 mC/kg at 10 kV, which was 8.5% and 11.6% higher than copper (1.77 mC/kg) and brass (1.72 mC/kg), respectively. After corrosion, nickel exhibited the smallest reduction in the charge-to-mass ratio (19.2%), significantly outperforming copper (40.2%) and brass (21.6%). Droplet size analysis using a Malvern Panalytical Spraytec spray particle analyzer (measurement range: 0.1–2000 µm) further confirmed the atomization advantages of nickel electrodes. The volume median diameter (Dv50) of droplets produced by nickel was 4.2–8 μm and 6.8–12.3 um smaller than those from copper and brass electrodes, respectively. After corrosion, nickel showed a smaller increase in droplet size spectrum inhomogeneity (24.5%), which was lower than copper (30.4%) and brass (25.8%), indicating superior droplet uniformity. By establishing a multi-factor predictive model for spray droplet size after electrode corrosion, this study quantifies the correlation between electrode characteristics and spray performance metrics. It provides a theoretical basis for designing weather-resistant electrostatic spray systems suitable for agricultural pesticide application scenarios involving prolonged exposure to corrosive chemicals. This work offers significant technical support for sustainable crop protection strategies.


  • Open Access

    Effect of Recovery Treatment on the Microstructure and Tribological Properties of Ultrasonic Impacted Al2FeCoNiCrW0.5 High-Entropy Alloy Coatings

    by Chong Zhang, Qingda Li, Jun Hu, Shengxue Zhao, Xin Zheng, Hao Wang, Hongyuan Liu

    To investigate the effect of recovery treatment on the microstructure and tribological properties of ultrasonic impact-treated Al2FeCoNiCrW0.5 high-entropy alloy coatings, laser cladding technology was used to fabricate coatings on a G10450 steel substrate, followed by ultrasonic impact treatment (UIT) and recovery treatment (HR, 300 °C). The results showed that the Al2FeCoNiCrW0.5 high-entropy alloy coating consisted of BCC and FCC phases. Ultrasonic impact treatment slightly broadened the XRD diffraction peaks, while the recovery treatment had minimal effect on them. Ultrasonic impact also refined the coating grains. Ultrasonic impact treatment increased the coating hardness from 738 HV0.5 to 856 HV0.5. Although the subsequent post-annealing slightly reduced the hardness to 806 HV0.5, it significantly improved wear resistance, with wear loss decreasing from 3.273 mm3 to 2.881 mm3, representing a 15% reduction in wear rate. The improvement in wear resistance was attributed to a change in the wear mechanism of the high-entropy alloy coating. Before and after post-annealing, the mechanism transitioned from abrasive wear, adhesive wear, and oxidative wear to primarily abrasive wear and oxidative wear. Additionally, the recovery treatment transformed the surface from hard and brittle to ductile and resilient.


  • Open Access

    Optimal Design and Dynamic Characteristic Analysis of Double-Link Trapezoidal Suspension for 3WPYZ High Gap Self-Propelled Sprayer

    by Changxi Liu, Jun Hu, Zhaonan Yu, Yufei Li, Shengxue Zhao, Qingda Li, Wei Zhang

    A fast spraying speed, wide working area, and easy operation are the operational advantages of high-clearance boom sprayers. To address the issue of spray boom mechanical vibration affecting the spraying effect, a double-link trapezoidal boom suspension is designed for the 3WPYZ sprayer. This suspension can achieve passive vibration reduction, active balance, and ground profiling. The kinematic model of the boom suspension is established based on D’Alembert’s principle and the principle of multi-body dynamics, and the design factors affecting the stability of the boom are determined. Through orthogonal experimental design and virtual kinematics simulation, the influence of the boom length and orifice diameter of each part on the swing angle and the natural frequency of the boom suspension is investigated. Design-Expert 8.0.6 software is used to analyze and optimize the test results. The optimization results show that, when the connecting boom length LAB is 265 mm, the inner boom suspension boom length LAD is 840 mm, the outer boom suspension boom length LBC is 1250 mm, and the throttle hole diameter d is 4 mm; the maximum swing angle of the boom suspension is reduced by 53.02%. In addition, the natural frequency of the boom is reduced from 1.3143 rad/s to 1.1826 rad/s, and the dynamic characteristic optimization effect is remarkable. The modal analysis results show that the first sixth-order vibration test frequency of the boom sprayer suspension designed in this paper meets the requirements and avoids the influence of external factors. Field tests show that, when the sprayer is excited by the environment at 3.5° to 4°, the boom suspension can reduce the vibration transmitted by the body to a reasonable range. The static analysis shows that the structural design of this study reduces the stress at the connection of the end boom suspension, the maximum displacement, and the maximum stress of the inner boom suspension. The test results of the dynamic characteristics of the implement are basically consistent with the virtual model simulation test results, thus achieving the optimization objectives.


  • Open Access

    Weed detection in soybean fields using improved YOLOv7 and evaluating herbicide reduction efficacy

    by Jinyang Li, Wei Zhang, Hong Zhou, Chuntao Yu, Qingda Li

    With the increasing environmental awareness and the demand for sustainable agriculture, herbicide reduction has become an important goal. Accurate and efficient weed detection in soybean fields is the key to test the effectiveness of herbicide application, but current technologies and methods still have some problems in terms of accuracy and efficiency, such as relying on manual detection and poor adaptability to some complex environments. Therefore, in this study, weeding experiments in soybean fields with reduced herbicide application, including four levels, were carried out, and an unmanned aerial vehicle (UAV) was utilized to obtain field images. We proposed a weed detection model—YOLOv7-FWeed—based on improved YOLOv7, adopted F-ReLU as the activation function of the convolution module, and added the MaxPool multihead self-attention (M-MHSA) module to enhance the recognition accuracy of weeds. We continuously monitored changes in soybean leaf area and dry matter weight after herbicide reduction as a reflection of soybean growth at optimal herbicide application levels. The results showed that the herbicide application level of electrostatic spraying + 10% reduction could be used for weeding in soybean fields, and YOLOv7-FWeed was higher than YOLOv7 and YOLOv7-enhanced in all the evaluation indexes. The precision of the model was 0.9496, the recall was 0.9125, the F1 was 0.9307, and the mAP was 0.9662. The results of continuous monitoring of soybean leaf area and dry matter weight showed that herbicide reduction could effectively control weed growth and would not hinder soybean growth. This study can provide a more accurate, efficient, and intelligent solution for weed detection in soybean fields, thus promoting herbicide reduction and providing guidance for exploring efficient herbicide application techniques.


  • Open Access

    Effect of Ultrasonic Impact on the Organization and Friction Wear Performance of AZ31B Magnesium Alloy Micro-Arc Oxidation Composite Coating

    by Qingda Li, Hao Wang, Canyu Che, Lin Wan, Xiaowei Dong, Song Wang, Chong Zhang

    To enhance the frictional wear performance of AZ31B magnesium alloy, a nanocrystalline layer was prepared by ultrasonic impact (UI) treatment on magnesium alloy samples, and the effects of different ultrasonic impact times (5 min, 10 min, and 15 min) on the organization and wear resistance of the composite coating were studied. The findings revealed that the maximum thickness of the composite coating was about 50 μm after 10 min of impact time, which was approximately 15 μm higher than that of the MAO coating. The elemental composition of the composite coating was mainly Mg, O, and Si elements, and the phase structure of the coating, mainly MgO and Mg2SiO4, was the same before and after UI. The microhardness value gradually decreased in a gradient with the increasing distance from the sample surface. The coating had a lower average coefficient of friction (0.18) and lower wear loss (1.56 mg) for the 15 min impact time. Moreover, a small amount of abrasive and adhesive wear served as the primary modes of wear.


  • Open Access

    Individual Pig Identification Using Back Surface Point Clouds in 3D Vision

    by Hong Zhou, Qingda Li, Qiuju Xie

    The individual identification of pigs is the basis for precision livestock farming (PLF), which can provide prerequisites for personalized feeding, disease monitoring, growth condition monitoring and behavior identification. Pig face recognition has the problem that pig face samples are difficult to collect and images are easily affected by the environment and body dirt. Due to this problem, we proposed a method for individual pig identification using three-dimension (3D) point clouds of the pig’s back surface. Firstly, a point cloud segmentation model based on the PointNet++ algorithm is established to segment the pig’s back point clouds from the complex background and use it as the input for individual recognition. Then, an individual pig recognition model based on the improved PointNet++LGG algorithm was constructed by increasing the adaptive global sampling radius, deepening the network structure and increasing the number of features to extract higher-dimensional features for accurate recognition of different individuals with similar body sizes. In total, 10,574 3D point cloud images of ten pigs were collected to construct the dataset. The experimental results showed that the accuracy of the individual pig identification model based on the PointNet++LGG algorithm reached 95.26%, which was 2.18%, 16.76% and 17.19% higher compared with the PointNet model, PointNet++SSG model and MSG model, respectively. Individual pig identification based on 3D point clouds of the back surface is effective. This approach is easy to integrate with functions such as body condition assessment and behavior recognition, and is conducive to the development of precision livestock farming.


  • Open Access

    Numerical Simulation of the Trajectory of UAVs Electrostatic Droplets Based on VOF-UDF Electro-Hydraulic Coupling and High-Speed Camera Technology

    by Changxi Liu, Jun Hu, Yufei Li, Shengxue Zhao, Qingda Li, Wei Zhang, Mingming Zhao

    The electrostatic spray technology can significantly improve the utilization rate of liquid medicine under the operation characteristics of unmanned aerial vehicles (UAVs) with small load and low spray volume. To explore the settlement law of electrostatic droplets, further improve the amount of droplets deposited in target crops, and reduce the loss of missing target, this study adopted the method of combining numerical simulation and high-speed photography to study the movement characteristics of electrostatic droplets of UAV induction conical electrostatic nozzle. Based on the droplet spatial dynamics theory, a user-defined function and volume of fluid (UDF-VOF) multiphase spray model is established to simulate the trajectory of electrostatic droplet. TEMA software is used to analyze the droplet motion image under electrostatic field, and the characteristic parameters, such as trajectory and velocity are obtained. Theoretical analysis and spray test results show that the main factors affecting electrostatic droplet settlement are charging voltage, droplet falling distance, and airflow velocity. The optimal charging voltage of electrostatic droplet is 14 kv, the maximum charge-mass ratio is 1.04 mC/kg, and the average particle size is 209.77 μm. The numerical simulation results show that spray height, charging voltage, and lateral wind speed have significant effects on droplet sedimentation. The results of high-speed camera analysis show that the induced electric field causes the droplet to adsorb the target crop, resulting in the droplet movement trajectory deflection.