Filipe Vidal
Research Subjects
Filipe Vidal has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Antonio Fernando Menezes Freire
Universidade Federal Fluminense - UFF, Niterói, RJ
3 shared publications - Bruna Maia Imbuzeiro
Univ Fed Fluminense UFF, Geol & Geophys Dept, Ave Gen Milton Tavares Souza Gragoata Campus, BR-24210346 Niteroi, RJ, Brazil
3 shared publications - Carla Semiramis Silveira
Universidade Federal Fluminense
3 shared publications Bruno de Sá Nobre da Rocha
2 shared publications- Victor Matheus Joaquim Salgado-Campos
Federal University of Rio de Janeiro
2 shared publications Ana Luiza Silva Moreira
1 shared publication
Latest Publications
- Open Access
- 28 September 2026
- Published by Elsevier in SSRN Electronic Journal
Integration of well logs, mineralogy and geochemical analysis of a natural analogue for CO2 injection in the Brazilian Pre-salt reservoir (Aptian Barra Velha Formation) using cutting samples
The injection of CO2 into depleted oil and gas reservoirs is part of CarbonCapture, Utilization, and Storage (CCUS) techniques, including enhanced oilrecovery (EOR) and the permanent storage of CO2 in geological formations.After the injection, the interaction between host rocks and CO2 causes dissolutionand precipitation of minerals. Therefore, the complexity of the systemdepends upon the host rock. Carbonates are challenging host rocks as theyare highly reactive, and many parameters can affect the resulting mineralogy,reason why natural analogues are valuable sources to comprehend thosechanges, but they are scarce. In Brazil, the intense activity of the oil and gasindustry in carbonate reservoirs of Pre-salt represents enormous potentialstorage volume for carbon capture purposes. Based on that, this work aimsto characterize a natural analogue for CO2 injection in the Barra Velha Formation,reservoir rocks of the Santos Basin, Brazil. Cutting samples from adrilling well were used for lithological description, X-ray Fluorescence (XRF)and X-ray Diffractometry (XRD) analysis, which were interpreted alongsidewell logs data, used to separate the well into six zones. The results showed anintense dolomitization, relevant silicification, presence of dawsonite, and lackof Mg-clay minerals. Different types of dolomites were described, presentingdistinct habits, colors, and distributions along the zones, which could be relatedto the result of different minerals interacting with CO2. This can bean indicator that CO2 intensified the dissolution of the clayey matrix, withthe precipitation of new phases of dolomite and dawsonite.
- 28 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessIntegration of well logs, mineralogy and geochemical analysis of a natural analogue for CO2 injection in the Brazilian Pre-salt reservoir (Aptian Barra Velha Formation) using cutting samples
The injection of CO2 into depleted oil and gas reservoirs is part of CarbonCapture, Utilization, and Storage (CCUS) techniques, including enhanced oilrecovery (EOR) and the permanent storage of CO2 in geological formations.After the injection, the interaction between host rocks and CO2 causes dissolutionand precipitation of minerals. Therefore, the complexity of the systemdepends upon the host rock. Carbonates are challenging host rocks as theyare highly reactive, and many parameters can affect the resulting mineralogy,reason why natural analogues are valuable sources to comprehend thosechanges, but they are scarce. In Brazil, the intense activity of the oil and gasindustry in carbonate reservoirs of Pre-salt represents enormous potentialstorage volume for carbon capture purposes. Based on that, this work aimsto characterize a natural analogue for CO2 injection in the Barra Velha Formation,reservoir rocks of the Santos Basin, Brazil. Cutting samples from adrilling well were used for lithological description, X-ray Fluorescence (XRF)and X-ray Diffractometry (XRD) analysis, which were interpreted alongsidewell logs data, used to separate the well into six zones. The results showed anintense dolomitization, relevant silicification, presence of dawsonite, and lackof Mg-clay minerals. Different types of dolomites were described, presentingdistinct habits, colors, and distributions along the zones, which could be relatedto the result of different minerals interacting with CO2. This can bean indicator that CO2 intensified the dissolution of the clayey matrix, withthe precipitation of new phases of dolomite and dawsonite.
- Open Access
- 9 June 2025
- Published by Petróleo Brasileiro SA in Boletim de Geociências da Petrobras
- Vol. 24 (1) , 1-18
Identification of the Pre-Alagoas Unconformity through real-time fluorescence and X-ray diffraction analyses of drilling cuttings
Oil well drilling requires rapid interpretation and timely decision-making. The success of these decisions largely depends on the effective use of conventional tools, such as drilling parameters, gas analysis, well logs, and cuttings descriptions. However, in certain situations, the integration of additional analytical techniques becomes necessary, particularly X-ray fluorescence (XRF) and X-ray diffraction (XRD). The application of XRF and XRD techniques at the wellsite during drilling operations in the Brazilian Pre-Salt has proven essential not only for the identification of igneous rocks, but also for providing valuable supplementary stratigraphic information across drilled intervals. Based on stratigraphic markers established by other methods, XRF analyses of cuttings samples have revealed increased concentrations of Fe, Al, and Mg in the clay-rich zones of the Barra Velha Formation, and elevated levels of Fe, Al, and K in the clay-rich zones of the Itapema Formation. The combined use of XRD has enabled mineralogical control over the geochemical data obtained. In wells with minimal barite contamination and limited dolomitization or silicification, it is possible to detect variations in the Ca/Sr ratio across the Pre-Alagoas unconformity, which marks the boundary between the Itapema and Barra Velha formations. In the carbonates of the Barra Velha Formation, a more pronounced substitution of Ca by Sr in calcite is observed, suggesting that the depositional environments of this unit were characterized by higher salinity compared to those of the Itapema Formation.
- 9 June 2025
- Published by Petróleo Brasileiro SA in Boletim de Geociências da Petrobras
- Vol. 24 (1) , 1-18
Open AccessIdentification of the Pre-Alagoas Unconformity through real-time fluorescence and X-ray diffraction analyses of drilling cuttings
Oil well drilling requires rapid interpretation and timely decision-making. The success of these decisions largely depends on the effective use of conventional tools, such as drilling parameters, gas analysis, well logs, and cuttings descriptions. However, in certain situations, the integration of additional analytical techniques becomes necessary, particularly X-ray fluorescence (XRF) and X-ray diffraction (XRD). The application of XRF and XRD techniques at the wellsite during drilling operations in the Brazilian Pre-Salt has proven essential not only for the identification of igneous rocks, but also for providing valuable supplementary stratigraphic information across drilled intervals. Based on stratigraphic markers established by other methods, XRF analyses of cuttings samples have revealed increased concentrations of Fe, Al, and Mg in the clay-rich zones of the Barra Velha Formation, and elevated levels of Fe, Al, and K in the clay-rich zones of the Itapema Formation. The combined use of XRD has enabled mineralogical control over the geochemical data obtained. In wells with minimal barite contamination and limited dolomitization or silicification, it is possible to detect variations in the Ca/Sr ratio across the Pre-Alagoas unconformity, which marks the boundary between the Itapema and Barra Velha formations. In the carbonates of the Barra Velha Formation, a more pronounced substitution of Ca by Sr in calcite is observed, suggesting that the depositional environments of this unit were characterized by higher salinity compared to those of the Itapema Formation.
- Open Access
- 22 August 2024
- Published by Elsevier in SSRN Electronic Journal
An Integrated Approach to Characterize Diabase Sills in Parnaíba Basin, Based on Xrd, Xrf, Cuttings Description, and Well Logs Interpretation
Igneous rocks play fundamental roles in the formation and evolution of petroleum systems in several basins around the world. In the Parnaíba Basin, the diabase sills and dikes, that correspond to the Mosquito and Sardinha formations, contribute as a thermal source for an unconventional hydrocarbon generation, as well as providing trap and seal for the petroleum system. To understand these intrusions, we propose a methodology to identify the igneous intrusions in well-logs, interpret their compositional variations and suggest a hypothesis to construct a crystallization model for these sills. The methodology is based on detailed descriptions of cuttings, X-ray fluorescence (XRF), X-ray diffractometry (XRD) and well logs, such as Gamma Ray (GR), Density (RHOZ) and Photoelectric Factor (PEFZ), from six exploratory wells drilled in the main gas-producing area of the Parnaíba Basin. The intrusions present in these wells were identified through the Igneability Feature and classified based on the GR curve as either “Barriguda” or “Caixote” features. The “Barriguda” intrusions shows variations in the well logs along their section, as well as variations in Aluminum, Calcium, Potassium, Zirconium, Iron, Titanium, Magnesium, Calcium, Nickel and Chromium values, evidencing a great textural and mineralogical variation, confirmed by the mineralogical results of XRD. Data interpretation suggests that the “Barriguda” intrusions are characterized in distinct electrofacies- and chemiofacies that represent an intern variation from top to base, related to magmatic differentiation that follows Bowen’s Reaction Series.
- 22 August 2024
- Published by Elsevier in SSRN Electronic Journal
Open AccessAn Integrated Approach to Characterize Diabase Sills in Parnaíba Basin, Based on Xrd, Xrf, Cuttings Description, and Well Logs Interpretation
Igneous rocks play fundamental roles in the formation and evolution of petroleum systems in several basins around the world. In the Parnaíba Basin, the diabase sills and dikes, that correspond to the Mosquito and Sardinha formations, contribute as a thermal source for an unconventional hydrocarbon generation, as well as providing trap and seal for the petroleum system. To understand these intrusions, we propose a methodology to identify the igneous intrusions in well-logs, interpret their compositional variations and suggest a hypothesis to construct a crystallization model for these sills. The methodology is based on detailed descriptions of cuttings, X-ray fluorescence (XRF), X-ray diffractometry (XRD) and well logs, such as Gamma Ray (GR), Density (RHOZ) and Photoelectric Factor (PEFZ), from six exploratory wells drilled in the main gas-producing area of the Parnaíba Basin. The intrusions present in these wells were identified through the Igneability Feature and classified based on the GR curve as either “Barriguda” or “Caixote” features. The “Barriguda” intrusions shows variations in the well logs along their section, as well as variations in Aluminum, Calcium, Potassium, Zirconium, Iron, Titanium, Magnesium, Calcium, Nickel and Chromium values, evidencing a great textural and mineralogical variation, confirmed by the mineralogical results of XRD. Data interpretation suggests that the “Barriguda” intrusions are characterized in distinct electrofacies- and chemiofacies that represent an intern variation from top to base, related to magmatic differentiation that follows Bowen’s Reaction Series.
- 3 March 2022
- Published by Sociedade Brasileira de Geofisica in Brazilian Journal of Geophysics
- Vol. 40 (1) , 19-41
Igneability feature: an effective, easy and low-cost way to identify basic igneous rocks using wireline well logs in open hole wells
The correct identification of igneous rocks is of fundamental importance during drilling and to the quality of the initial assessment of their role in the petroleum systems. These rocks show characteristics in geophysical well logs that are distinct from those of sedimentary rocks. After calibrating with laboratory data, we propose a method to identify and characterize igneous rocks using basic geophysical logs. This method consists of a crossover between bulk density and photoelectric factor logs to identify basic igneous rocks in sedimentary sections, named "igneability feature". This log feature consists in using the bulk density log on the scale 2.0 to 3.0 g/cm³ in the same track as the photoelectric factor log on the inverted scale, from 12 to 2 b/e. Then, when the density log is to the right of the photoelectric factor, it denotes the presence of basic igneous rocks.Acid igneous rocks were also studied and characterized by a complementary method, which consists in a crossover between the gamma ray log and a factor calculated from the bulk density and photoelectric factor log curves. Thus, this method covers most of the varieties of igneous rock found in the Brazilian basins, such as Santos, Parnaíba and Paraná.
- 3 March 2022
- Published by Sociedade Brasileira de Geofisica in Brazilian Journal of Geophysics
- Vol. 40 (1) , 19-41
Igneability feature: an effective, easy and low-cost way to identify basic igneous rocks using wireline well logs in open hole wells
The correct identification of igneous rocks is of fundamental importance during drilling and to the quality of the initial assessment of their role in the petroleum systems. These rocks show characteristics in geophysical well logs that are distinct from those of sedimentary rocks. After calibrating with laboratory data, we propose a method to identify and characterize igneous rocks using basic geophysical logs. This method consists of a crossover between bulk density and photoelectric factor logs to identify basic igneous rocks in sedimentary sections, named "igneability feature". This log feature consists in using the bulk density log on the scale 2.0 to 3.0 g/cm³ in the same track as the photoelectric factor log on the inverted scale, from 12 to 2 b/e. Then, when the density log is to the right of the photoelectric factor, it denotes the presence of basic igneous rocks.Acid igneous rocks were also studied and characterized by a complementary method, which consists in a crossover between the gamma ray log and a factor calculated from the bulk density and photoelectric factor log curves. Thus, this method covers most of the varieties of igneous rock found in the Brazilian basins, such as Santos, Parnaíba and Paraná.