Qianlan Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Qianlan Hu has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Yanqing Wu
Peking University
12 shared publications - Shenwu Zhu
Wuhan National High Magnetic Field Center and the School of Integrated Circuits, Huazhong University of Science and Technology, Wuhan, China
9 shared publications Qijun Li
Wuhan National High Magnetic Field Center and the School of Integrated Circuits, Huazhong University of Science and Technology, Wuhan, China
6 shared publicationsJiyang Kang
Wuhan National High Magnetic Field Center and the School of Integrated Circuits, Huazhong University of Science and Technology, Wuhan, China
5 shared publications- Min Zeng
School of Integrated Circuits and Beijing Advanced Innovation Center for Integrated Circuits, Peking University, Beijing, China
4 shared publications Shiyuan Liu
Peking University
4 shared publications
Latest Publications
- 20 October 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (43) , 28986-28993
Monolithic 3D Stacked Carbon Nanotube/Indium–Tin–Oxide Complementary Transistors for High-Frequency Logic and Sense Amplifier Integration with Memory
Complementary field-effect transistors (CFETs) maximize 3D integration density but face two fundamental bottlenecks: the stringent thermal budget of silicon-based sequential stacking and the inherent electrical mismatches in homogeneous material systems. To overcome these challenges, we demonstrate a monolithic 3D-stacked heterogeneous CFET architecture integrating back-end-of-line (BEOL)-compatible p-type carbon nanotube (CNT) and n-type indium–tin–oxide (ITO) channels. Both materials exhibit high carrier mobility and low-temperature process, which simultaneously resolve the bipolar transport disparity and mitigate thermal degradation. Consequently, the resulting CFET inverters exhibit favorable statistical uniformity and symmetric transfer characteristics, enabling the fabrication of versatile logic gates. Besides, a 5-stage ring oscillator (RO) achieves a high frequency of 334 MHz, with a 0.3 ns stage delay, demonstrating potential applications of CFET in high-speed digital circuits. Furthermore, bridging logic and memory, a CFET-based sense amplifier (SA) is integrated with an ITO-based planar capacitorless (2T0C) dynamic random-access memory (DRAM) cell. This hybrid system achieves data write/read operations and signal amplification, providing an architectural platform for next-generation ultradense 3D logic and memory systems.
- 20 October 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (43) , 28986-28993
Monolithic 3D Stacked Carbon Nanotube/Indium–Tin–Oxide Complementary Transistors for High-Frequency Logic and Sense Amplifier Integration with Memory
Complementary field-effect transistors (CFETs) maximize 3D integration density but face two fundamental bottlenecks: the stringent thermal budget of silicon-based sequential stacking and the inherent electrical mismatches in homogeneous material systems. To overcome these challenges, we demonstrate a monolithic 3D-stacked heterogeneous CFET architecture integrating back-end-of-line (BEOL)-compatible p-type carbon nanotube (CNT) and n-type indium–tin–oxide (ITO) channels. Both materials exhibit high carrier mobility and low-temperature process, which simultaneously resolve the bipolar transport disparity and mitigate thermal degradation. Consequently, the resulting CFET inverters exhibit favorable statistical uniformity and symmetric transfer characteristics, enabling the fabrication of versatile logic gates. Besides, a 5-stage ring oscillator (RO) achieves a high frequency of 334 MHz, with a 0.3 ns stage delay, demonstrating potential applications of CFET in high-speed digital circuits. Furthermore, bridging logic and memory, a CFET-based sense amplifier (SA) is integrated with an ITO-based planar capacitorless (2T0C) dynamic random-access memory (DRAM) cell. This hybrid system achieves data write/read operations and signal amplification, providing an architectural platform for next-generation ultradense 3D logic and memory systems.
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (10) , 2051-2054
Reliability Improvement of Top-Gate ITO Transistors by Post-Metal Annealing at 450 °C
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (10) , 2051-2054
Reliability Improvement of Top-Gate ITO Transistors by Post-Metal Annealing at 450 °C
- 10 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (9) , 1632-1635
First Demonstration of High-Temperature Reliability on La:HZO-La:In2O3 FeFET With High Endurance of 1010 at 125 °C
In this letter, we demonstrate 8 nm and 5 nm lanthanum-doped Hf0.5Zr0.5O2 (La:HZO) films with excellent ferroelectric and robust reliability at high temperature for the first time. A low saturated operating voltage of 1.2 V and high breakdown field of 9 MV/cm is obtained in 5 nm La:HZO films at the same time. A high endurance of 3×1011 at room temperature and 1010 at high temperature of 125 °C is obtained in 5 nm La:HZO films, owing to the superior low Eop/Ebd. Furthermore, we demonstrated a top-gate FeFET on La:In2O3 channel with a channel length of 50 nm, demonstrating superior high endurance of 3×1011 with memory window of 0.9 V at room temperature and 1010 with memory window of 0.9 V at high temperature of 125 °C. Besides, our FeFETs exhibit excellent retention exceeding 10 years at 125 °C, showing the great potential of La:HZO for high-reliability ferroelectric applications.
- 10 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (9) , 1632-1635
First Demonstration of High-Temperature Reliability on La:HZO-La:In2O3 FeFET With High Endurance of 1010 at 125 °C
In this letter, we demonstrate 8 nm and 5 nm lanthanum-doped Hf0.5Zr0.5O2 (La:HZO) films with excellent ferroelectric and robust reliability at high temperature for the first time. A low saturated operating voltage of 1.2 V and high breakdown field of 9 MV/cm is obtained in 5 nm La:HZO films at the same time. A high endurance of 3×1011 at room temperature and 1010 at high temperature of 125 °C is obtained in 5 nm La:HZO films, owing to the superior low Eop/Ebd. Furthermore, we demonstrated a top-gate FeFET on La:In2O3 channel with a channel length of 50 nm, demonstrating superior high endurance of 3×1011 with memory window of 0.9 V at room temperature and 1010 with memory window of 0.9 V at high temperature of 125 °C. Besides, our FeFETs exhibit excellent retention exceeding 10 years at 125 °C, showing the great potential of La:HZO for high-reliability ferroelectric applications.
- Top Cited PapersOpen Access
- 23 May 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (21) , eadu4323
3D stacked IGZO 2T0C DRAM array with multibit capability for computing in memory applications
Traditional dynamic random access memory (DRAM) technology faces grand challenges in power consumption due to the constant data refresh and in density due to the physical limit for dimension scaling. Recently, two-transistor zero-capacitor (2T0C) DRAM based on amorphous indium gallium zinc oxide (IGZO) exhibits long data retention owing to its extremely low off-state leakage current. Furthermore, the low thermal budget of the IGZO channel enables the monolithic three-dimensional (3D) stacking for higher bit density beyond the planar scaling limit. However, the demonstration of 3D stacking for IGZO has been limited to 2T0C DRAM single cell. In this work, an 8 by 8 3D stacked IGZO 2T0C DRAM array was designed and manufactured with optimized electrical characteristics, exhibiting 3-bit storage with over 100-second retention time. Furthermore, a neural network model has been demonstrated to achieve an accuracy of 94.95% in image recognition, providing for promising pathway toward computing in memory to overcome the “memory wall.”
- 23 May 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (21) , eadu4323
Top Cited PapersOpen Access3D stacked IGZO 2T0C DRAM array with multibit capability for computing in memory applications
Traditional dynamic random access memory (DRAM) technology faces grand challenges in power consumption due to the constant data refresh and in density due to the physical limit for dimension scaling. Recently, two-transistor zero-capacitor (2T0C) DRAM based on amorphous indium gallium zinc oxide (IGZO) exhibits long data retention owing to its extremely low off-state leakage current. Furthermore, the low thermal budget of the IGZO channel enables the monolithic three-dimensional (3D) stacking for higher bit density beyond the planar scaling limit. However, the demonstration of 3D stacking for IGZO has been limited to 2T0C DRAM single cell. In this work, an 8 by 8 3D stacked IGZO 2T0C DRAM array was designed and manufactured with optimized electrical characteristics, exhibiting 3-bit storage with over 100-second retention time. Furthermore, a neural network model has been demonstrated to achieve an accuracy of 94.95% in image recognition, providing for promising pathway toward computing in memory to overcome the “memory wall.”
- 7 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (6) , 995-998
Investigation of Physical Limits of Low Temperature Subthreshold Swing in Indium-Tin-Oxide Transistors
This work investigated the physical limits of subthreshold swing (SS) in indium-tin-oxide (ITO) transistors with temperatures down to 20 K. As the temperature decreases, the ITO transistors first exhibit a significant reduction in SS and reach a common saturated value at temperatures below 77 K for gate dielectrics of 10 nm, 5 nm, and 3 nm HfZrLaO dielectrics. The temperature dependence for SS on temperature for different dielectric thicknesses can be attributed to a transition of the dominant carrier conduction mechanism from percolation conduction (PC) to trap-limited conduction (TLC) as the temperature decreases. Benefiting from the thin dielectric thickness, a short channel 40 nm ITO transistor achieves the highest Q(gm/SS) of 9.26 (822 μS/μm / 88.5 mV/dec) at a drain bias voltage of 0.5 V.
- 7 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (6) , 995-998
Investigation of Physical Limits of Low Temperature Subthreshold Swing in Indium-Tin-Oxide Transistors
This work investigated the physical limits of subthreshold swing (SS) in indium-tin-oxide (ITO) transistors with temperatures down to 20 K. As the temperature decreases, the ITO transistors first exhibit a significant reduction in SS and reach a common saturated value at temperatures below 77 K for gate dielectrics of 10 nm, 5 nm, and 3 nm HfZrLaO dielectrics. The temperature dependence for SS on temperature for different dielectric thicknesses can be attributed to a transition of the dominant carrier conduction mechanism from percolation conduction (PC) to trap-limited conduction (TLC) as the temperature decreases. Benefiting from the thin dielectric thickness, a short channel 40 nm ITO transistor achieves the highest Q(gm/SS) of 9.26 (822 μS/μm / 88.5 mV/dec) at a drain bias voltage of 0.5 V.
- 20 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (3) , 405-408
First Demonstration of Deeply Scaled 2T0C DRAM With Record Data Retention and Fast Write Speed
In this work, the first pitch scaling of 2T0C dynamic random-access memory (DRAM) based on indium-tin-oxide (ITO) transistors has been successfully fabricated, achieving a record-low contact length of 20 nm and channel length of 10 nm. The deeply scaled 2T0C DRAM demonstrates multi-level operation with an ultra-fast write speed of 10 ns, facilitated by a high on-state current. Furthermore, it features an outstanding data retention time exceeding 3000 s, attributed to its low off-state leakage current of 1.3×10-20 A/μm. This work highlights the tremendous potential of oxide semiconductor-based 2T0C DRAM for future high-density memory applications.
- 20 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (3) , 405-408
First Demonstration of Deeply Scaled 2T0C DRAM With Record Data Retention and Fast Write Speed
In this work, the first pitch scaling of 2T0C dynamic random-access memory (DRAM) based on indium-tin-oxide (ITO) transistors has been successfully fabricated, achieving a record-low contact length of 20 nm and channel length of 10 nm. The deeply scaled 2T0C DRAM demonstrates multi-level operation with an ultra-fast write speed of 10 ns, facilitated by a high on-state current. Furthermore, it features an outstanding data retention time exceeding 3000 s, attributed to its low off-state leakage current of 1.3×10-20 A/μm. This work highlights the tremendous potential of oxide semiconductor-based 2T0C DRAM for future high-density memory applications.
- 10 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (3) , 512-515
Demonstration of Low-Power Three-Dimensional CMOS Inverters Based on Si p-Tunnel FET and ITO n-FET
In this work, low-power CMOS inverter and 5-stage ring oscillator (RO) are demonstrated based on heterogeneous 3D integration of vertically stacked FEOL p-type silicon tunnel FET (TFET) and BEOL n-type indium-tin-oxide (ITO) FET. Owing to the low off-state current of both p-type and n-type FET, our ITO/TFET heterogeneous 3D integrated CMOS inverters show a low static power of 4.83 pW at ${\text{V}}_{\text {dd}}=1$ V and a high voltage gain of 522 V/V at ${\text{V}}_{\text {dd}}=2.5$ V, among the best values in reported amorphous oxide semiconductors (AOS) CMOS devices. Meanwhile, we also verified the functionality of logic circuits including 4T-SRAM cell and 5-stage RO based on our ITO/TFET heterogeneous 3D integrated CMOS inverters, and our 5-stage RO achieved a low propagation delay of 30 ns/stage, which is also the lowest value among AOS and TFET related CMOS devices.
- 10 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 46 (3) , 512-515
Demonstration of Low-Power Three-Dimensional CMOS Inverters Based on Si p-Tunnel FET and ITO n-FET
In this work, low-power CMOS inverter and 5-stage ring oscillator (RO) are demonstrated based on heterogeneous 3D integration of vertically stacked FEOL p-type silicon tunnel FET (TFET) and BEOL n-type indium-tin-oxide (ITO) FET. Owing to the low off-state current of both p-type and n-type FET, our ITO/TFET heterogeneous 3D integrated CMOS inverters show a low static power of 4.83 pW at ${\text{V}}_{\text {dd}}=1$ V and a high voltage gain of 522 V/V at ${\text{V}}_{\text {dd}}=2.5$ V, among the best values in reported amorphous oxide semiconductors (AOS) CMOS devices. Meanwhile, we also verified the functionality of logic circuits including 4T-SRAM cell and 5-stage RO based on our ITO/TFET heterogeneous 3D integrated CMOS inverters, and our 5-stage RO achieved a low propagation delay of 30 ns/stage, which is also the lowest value among AOS and TFET related CMOS devices.
- 14 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (10) , 1764-1767
First Experimental Demonstration of 3D-Stacked 2T0C DRAM Cells Based on Indium Tin Oxide Channel
In this paper, we provide the first experimental demonstration of 3D-stacked 2T0C DRAM cells based on indium tin oxide (ITO) FETs. The 3D sequential integration process steps cause negligible performance degradation to the bottom ITO FET including on current, on-off ratio, subthreshold slope, and mobility, exhibiting excellent stability during the fabrication process of the top FET. Both layers of FETs show very small threshold voltage Vth shift under positive bias stress measurement for 3000 s, where the negative shift of Vth is only about 0.045 V and 0.08 V for the 1 st and 2 nd layer TFT, respectively. The 3D-stacked 2T0C DRAM cell consisting of two ITO FETs shows excellent data retention of around 1360 s and >10 11 endurance, rivaling the counterparts based on planar structures. These results indicate the great potential of the 3D-stacked 2T0C DRAM cells for future 3D DRAM applications.
- 14 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (10) , 1764-1767
First Experimental Demonstration of 3D-Stacked 2T0C DRAM Cells Based on Indium Tin Oxide Channel
In this paper, we provide the first experimental demonstration of 3D-stacked 2T0C DRAM cells based on indium tin oxide (ITO) FETs. The 3D sequential integration process steps cause negligible performance degradation to the bottom ITO FET including on current, on-off ratio, subthreshold slope, and mobility, exhibiting excellent stability during the fabrication process of the top FET. Both layers of FETs show very small threshold voltage Vth shift under positive bias stress measurement for 3000 s, where the negative shift of Vth is only about 0.045 V and 0.08 V for the 1 st and 2 nd layer TFT, respectively. The 3D-stacked 2T0C DRAM cell consisting of two ITO FETs shows excellent data retention of around 1360 s and >10 11 endurance, rivaling the counterparts based on planar structures. These results indicate the great potential of the 3D-stacked 2T0C DRAM cells for future 3D DRAM applications.
- Open Access
- 19 June 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (25)
1/f noise of short-channel indium tin oxide transistors under stress
In this work, we investigate the reliability and stability of short-channel indium tin oxide (ITO) field-effect transistors through 1/f noise characterization at elevated temperature with positive bias temperature instability (PBTI). The 1/f noise behavior of a short-channel 60-nm-long channel ITO transistor can be described by the carrier number fluctuation model, suggesting that carrier trapping and de-trapping by trap states within the 5 nm thin high-κ HfLaO dielectric are the dominant mechanisms affecting 1/f noise. Small positive threshold voltage shifts of 0.042 and 0.057 V after PBTI measurements of 3000 s at 25 and 85 °C have been obtained, respectively. The higher gate leakage current at elevated temperature leads to an earlier breakdown in the time-dependent dielectric breakdown measurement. Furthermore, 1/f noise after PBTI has also been carried out at elevated temperature, and the degradations after stress can also be attributed to the stress induced traps inside the gate dielectric.
- 19 June 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (25)
Open Access1/f noise of short-channel indium tin oxide transistors under stress
In this work, we investigate the reliability and stability of short-channel indium tin oxide (ITO) field-effect transistors through 1/f noise characterization at elevated temperature with positive bias temperature instability (PBTI). The 1/f noise behavior of a short-channel 60-nm-long channel ITO transistor can be described by the carrier number fluctuation model, suggesting that carrier trapping and de-trapping by trap states within the 5 nm thin high-κ HfLaO dielectric are the dominant mechanisms affecting 1/f noise. Small positive threshold voltage shifts of 0.042 and 0.057 V after PBTI measurements of 3000 s at 25 and 85 °C have been obtained, respectively. The higher gate leakage current at elevated temperature leads to an earlier breakdown in the time-dependent dielectric breakdown measurement. Furthermore, 1/f noise after PBTI has also been carried out at elevated temperature, and the degradations after stress can also be attributed to the stress induced traps inside the gate dielectric.
- 29 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 44 (5) , 837-840
High-Performance Short-Channel Top-Gate Indium-Tin-Oxide Transistors by Optimized Gate Dielectric
In this work, high-performance top-gate indium-tin-oxide (ITO) transistors with high carrier mobility of 60 cm2/ $\text{V}\cdot \text{s}$ have been successfully demonstrated using optimized atomic layer deposited (ALD) La-doped HfO2 as the top-gate dielectric. The scaled device with a channel length of 50 nm exhibits a high current on/off ratio over ${7} \times {10} ^{{9}}$ owing to the excellent electrostatic control. A maximum output current of $1680~\mu \text{A}/\mu \text{m}$ with a remarkable carrier velocity of ${0}.{87} \times {10} ^{{7}}$ cm/s has also been achieved due to the record low contact resistance of $180~\Omega \cdot \mu \text{m}$ . The on- and off-state performance of our ITO transistors are the highest among previous top-gate amorphous oxide semiconductors.
- 29 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 44 (5) , 837-840
High-Performance Short-Channel Top-Gate Indium-Tin-Oxide Transistors by Optimized Gate Dielectric
In this work, high-performance top-gate indium-tin-oxide (ITO) transistors with high carrier mobility of 60 cm2/ $\text{V}\cdot \text{s}$ have been successfully demonstrated using optimized atomic layer deposited (ALD) La-doped HfO2 as the top-gate dielectric. The scaled device with a channel length of 50 nm exhibits a high current on/off ratio over ${7} \times {10} ^{{9}}$ owing to the excellent electrostatic control. A maximum output current of $1680~\mu \text{A}/\mu \text{m}$ with a remarkable carrier velocity of ${0}.{87} \times {10} ^{{7}}$ cm/s has also been achieved due to the record low contact resistance of $180~\Omega \cdot \mu \text{m}$ . The on- and off-state performance of our ITO transistors are the highest among previous top-gate amorphous oxide semiconductors.