TCThéodore Cherrière

Théodore Cherrière

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Théodore Cherrière has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Élaboration de méthodes et d'outils logiciels pour l'optimisation topologique magnéto-mécanique de machines électriques tournantes

    by Théodore Cherrière

    Dans le contexte de la transition énergétique et de l'électrification des usages, l'amélioration des performances des actionneurs électromagnétiques passe obligatoirement par des processus d'optimisation du dimensionnement. De telles méthodologies ont d'ores et déjà été mises en place, mais se focalisent principalement sur des géométries préalablement paramétrées, ce qui limite l'espace des possibles. Les travaux menés dans le cadre de cette thèse visent alors à mettre en place une méthodologie d'optimisation topologique efficace, capable de répartir au mieux les distributions de matériaux (fer, air, conducteurs, aimants) nécessaires pour générer une machine synchrone dans sa globalité, sans paramétrage de sa géométrie. Pour ce faire, une méthodologie d'optimisation topologique multi-matériaux à densité a été développée. Son application à l'optimisation d'un stator triphasé met en évidence l'importance des procédés de pénalisation, de filtrage et de contrôle sur l'algorithme d'optimisation. La méthodologie est ensuite étendue à la conception d'une machine entière : bien que performantes, les meilleures structures obtenues comportent des barrières de flux sans tenue mécanique. Après incorporations de contraintes de rigidité des rotors, la méthode aboutit à des structures performantes et connexes en un temps de calcul raisonnable, ce qui démontre la pertinence de ce type d'approches dans la conception d'actionneurs électromagnétiques. À terme, l'intégration de l'ensemble des physiques qui interviennent dans les spécifications du cahier des charges dès les phases préliminaires permettrait d'économiser temps et argent dans la conception de machines électriques innovantes.

  • Air Gap Shape Optimization for Minimizing Proximity Losses in an Inductor

    by S. Gaydier, I. Zehavi, T. Cherrière, P. Gangl

    In air-gapped inductors, the magnetic flux bulges outward from the gap - a phenomenon called the fringing effect. When these flux lines cut across the conductor windings, they generate undesired eddy currents that lead to substantial AC losses and reduced efficiency. To mitigate these losses, we develop a constrained shape optimization, aiming at finding an optimal air gap profile that minimizes conductor losses and keeps the inductance at a desired value. Our framework leverages established techniques such as complex permeability homogenization for loss modeling, shape sensitivity analysis coupling the adjoint method with the so-called Hilbertian regularization-extension method. The optimized air gap profile is curved to concentrate the flux lines away from the (fixed) conductors. Our implementation uses the open-source finite-element toolbox NGSolve and the Mmg remeshing library; all the codes are freely available.

  • Electro-thermal topology optimization of an electric machine by the topological derivative considering drive cycles

    by N. Krenn, T. Cherrière, S. Schöps, P. Gangl

    We consider a 2d permanent magnet synchronous machine operating in a sequence of static operating points coming from a drive cycle. We aim to find a rotor design which maximizes the efficiency defined as the quotient of input and output energy considering Joule losses in the stator and eddy current losses in the permanent magnets. A coupled electromagnetic-thermal analysis of the rotor considers the eddy current losses as heat source and adds a temperature constraint to avoid damage of the permanent magnets. Additionally we impose Von-Mises stress constraints to maintain the mechanical integrity of the design. To solve the resulting free form topology optimization problem we use a level set description of the design and the topological derivative as sensitivity information. We show the effect of this constraint at very high speeds which is a trend in recent machine development.


  • Topology optimization with arbitrarily many materials: density versus level-set applied to a hybrid excited rotor

    by Théodore Cherrière, Peter Gangl, Nepomuk Krenn

    This work addresses the topology optimization of a rotor pole of a hybrid-flux machine with gradient methods. The main challenge is handling many different material types (non-linear magnetic steel, air, DC conductors, and magnets with several discrete orientations). Classical gradient-free topology optimization approaches are inefficient due to the high dimensionality of the optimization space, and usual density-based methods fail to provide meaningful results by falling into uninteresting local optima. Therefore, two general and distinct methodologies are proposed: an extended density approach considering hierarchical non-orthogonal as well as simplex interpolation domains, and a level-set method based on the topological derivative. Both methods result in meaningful designs that are analyzed and discussed, and recommendations are formulated.


  • Multimaterial filtering applied to the topology optimization of a permanent magnet synchronous machine

    by Théodore Cherrière, Sami Hlioui, François Louf, Luc Laurent

    Purpose: This study aims to propose a general methodology to handle multimaterial filtering for density-based topology optimization containing periodic or antiperiodic boundary conditions, which are expected to reduce the simulation time of electrical machines. The optimization of the material distribution in a permanent magnet synchronous machine rotor illustrates the relevance of this approach. Design/methodology/approach: The optimization algorithm relies on an augmented Lagrangian with a projected gradient descent. The 2D finite element method computes the physical and adjoint states to evaluate the objective function and its sensitivities. Concerning regularization, a mathematical development leads to a multimaterial convolution filtering methodology that is consistent with the boundary conditions and helps eliminate artifacts. Findings: The method behaves as expected and shows the superiority of multimaterial topology optimization over bimaterial topology optimization for the chosen test case. Unlike the standard approach that uses a cropped convolution kernel, the proposed methodology does not artificially reflect the limits of the simulation domain in the optimized material distribution. Originality/value: Although filtering is a standard tool in topology optimization, no attention has previously been paid to the influence of periodic or antiperiodic boundary conditions when dealing with different natures of materials. The comparison between the bimaterial and multimaterial topology optimization of a permanent magnet machine rotor without symmetry constraints constitutes another originality of this work.


  • Open Access

    Multi-material topology optimization of a flux switching machine

    by Théodore Cherrière, Sami Hlioui, Luc Laurent, François Louf, Hamid Ben Ahmed, Mohamed Gabsi

    This paper investigates the topology optimization of the rotor of a 3-phase flux-switching machine with 12 permanent magnets located within the stator. The objective is to find the steel distribution within the rotor that maximizes the average torque for a given stator, permanent magnets, and electrical currents. The optimization algorithm relies on a density method based on gradient descent. The adjoint variable method is used to compute the sensitivities efficiently. Since the rotor topology depends on the current feedings, this approach is tested on several electrical periods and returns alternative topologies. Then, the method is extended to the multi-material case and applied to optimize the non-magnet part of the stator. When dealing with 3 phases, the algorithm returns the reference topology as well as a theoretical machine with no return conductor according to the set current angle. To illustrate the creativity of the method, the optimization is finally performed with a single-phase and returns a new topology.

  • Effects of Filtering and Current-Angle Adjustment on the Multi-Material Topology Optimization of a Three-Phase Stator

    by T. Cherrière, S. Hlioui, L. Laurent, F. Louf, H. Ben Ahmed, M. Gabsi

    This paper investigates the multi-material topology optimization of the 3-phase stator of an electrical machine. The density-based optimization framework uses a gradient descent on the physical properties of the candidate materials (magnetic polarization and current density). The results indicate that a smoothing procedure is necessary to avoid non-manufacturable designs and promotes a broader exploration of solutions. They also highlight a current angle shifting due to the presence of permanent magnets from the beginning of the optimization. The current angle is therefore added to the optimization variables to address this issue. An efficient optimization procedure that couples both techniques is proposed to improve the performance of the algorithm. The following hybrid method returns symmetrical results that perform better than the asymmetrical structures obtained with the other techniques applied independently, indicating that the asymmetry represents a local optimum.


  • A Multimaterial Topology Optimization Considering the PM Nonlinearity

    by Théodore Cherrière, Tom Vancorsellis, Sami Hlioui, Luc Laurent, François Louf, Hamid Ben Ahmed, Mohamed Gabsi

    Density-based topology optimization methodologies in magnetostatics interpolate either the magnetic permeability μ or the magnetic reluctivity ν to define intermediate materials and compute the problem sensitivities. These choices may lack physical interpretation and are not suited to model realistic permanent magnets. This work proposes the interpolation of the vector magnetic polarization m as a more general alternative, which can model any magnetic material. It is then applied to the multi-material topology optimization of the rotor of a permanent magnet synchronous machine. The case of an ideal permanent magnet with a constant magnetic polarization is compared to that of AlNiCo. The results show that considering the non-linearity of the permanent magnet can significantly impact the optimized geometry.


  • Multi-material topology optimization using Wachspress interpolations for designing a 3-phase electrical machine stator

    by Théodore Cherrière, Luc Laurent, Sami Hlioui, François Louf, Pierre Duysinx, Christophe Geuzaine, Hamid Ben Ahmed, Mohamed Gabsi, Eduardo Fernández


  • Open Access

    Multi‐material topology optimization of a rotating electrical machine with a density‐based method

    by Théodore Cherrière, Luc Laurent, Sami Hlioui, François Louf, Hamid Ben Ahmed, Mohamed Gabsi

    Topology optimization (TO) has been extensively studied in the past decades especially in mechanical engineering. Among different techniques, density‐based methods have become very popular. In electrical engineering, TO has been applied essentially to linear actuators [1] or machines rotors [2] [3], but few works such as [4] deal with the coil repartition within the stator of rotating machines.In this study, we investigate a density‐based topology optimization method, which aims to maximize the average torque of a rotating electrical machine from random or uniform initial material repartition. Material properties such as magnetic permeability or current density are interpolated on densities between each material to obtain a differentiable optimization problem, using SIMP or RAMP [5] for example. A custom magnetostatic finite element solver was implemented on MATLAB®. It takes into account the non‐linearity of magnetic materials with Newton‐Raphson method. The optimization algorithm relies on sensitivities obtained by the adjoint variable method (AVM) [6]. The methodology was performed for two test cases :• optimization of iron/air repartition within the rotor of a synchronous reluctant machine (SRM)• optimization of coils/iron/air repartition within the stator of a one phase permanent magnet synchronous machine (PMSM).In the air/iron case, a filtering technique inspired by ESO [7] is applied: iron which carries few magnetic flux is removed. No filtering was applied in the multi‐material case, but a normalization of the gradient was investigated.As a result, we obtain flux barriers [8] for the optimized SRM rotor, which correspond to industrial designs. However, some convergence issues happened, especially for multi‐material optimization. The gradient normalization helps preventing this phenomenom but leads to surprising asymmetric designs, which need further investigations. It is also necessary to improve the robustness of the method especially for high current density, in order to optimize both the rotor and the stator. Multiphysics considerations will be taken into account in future work.