Santoshkumar Dattatray Bhat
Research Subjects
Santoshkumar Dattatray Bhat has a total of 102 co-authors. Here are the top co-authors by number of shared publications:
P. Dhanasekaran
12 shared publications- Sreekuttan Maraveedu Unni
CSIR‐Central Electrochemical Research Institute (CECRI) Madras Unit CSIR Madras Complex Chennai Tamil Nadu India
8 shared publications - Maniprakundil Neeshma
CSIR-Central Electrochemical Research Institute-Madras Unit, CSIR Madras Complex, Chennai 600113, India
7 shared publications - Sivasuriyanarayanan Vinod Selvaganesh
Indian Institute of Technology, Madras, Chennai, Tamil Nadu 600036, India
7 shared publications Avanish Shukla
5 shared publications- Gutru Rambabu
CSIR-Central Electrochemical Research Institute-Madras Unit, Chennai-600 113, India
5 shared publications
Latest Publications
- 29 October 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (44) , 26195-26205
High Proton Conduction in a Hydrogen-Bonded Co(II) Framework through Pendant Carboxylic Acid-Decorated 1D Channels
A two-dimensional Co(II) metal–organic framework, FCG-7 (FCG = Framework Chemistry Group of CSIR-CSMCRI), containing pendant carboxylic acid (−COOH) groups was rationally constructed to investigate the role of intrinsic proton-donating sites in solid-state proton transport. Crystallographic study divulged a hydrogen-bonded layered framework in which the uncoordinated −COOH groups project toward one-dimensional channels, providing accessible sites for interaction with guest water molecules. The activated framework (FCG-7a) exhibits good hydrolytic and thermal stability, a lower water contact angle of 48.6°, and a proton conductivity of 1.25 × 10–3 S cm–1 at 80 °C and 95% relative humidity (RH). The low activation energy (0.22 eV) is in agreement with a predominantly Grotthuss-type proton-hopping mechanism. Proton transport is strongly humidity-dependent, with conductivity increasing approximately 1600-fold from 60% to 95% RH at 80 °C, highlighting the participation of confined water molecules in establishing extended hydrogen-bonding pathways. To evaluate the contribution of pendant −COOH groups, a structurally analogous framework, FCG-10, lacking pendant carboxylic acid functionality, was prepared through a molecular-scissoring strategy. FCG-10a exhibits a lower conductivity of 3.5 × 10–4 S cm–1 under identical conditions. These results highlight a structure-guided strategy wherein accessible acidic sites and water-mediated hydrogen-bonding networks promote proton transport in crystalline frameworks
- 29 October 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (44) , 26195-26205
High Proton Conduction in a Hydrogen-Bonded Co(II) Framework through Pendant Carboxylic Acid-Decorated 1D Channels
A two-dimensional Co(II) metal–organic framework, FCG-7 (FCG = Framework Chemistry Group of CSIR-CSMCRI), containing pendant carboxylic acid (−COOH) groups was rationally constructed to investigate the role of intrinsic proton-donating sites in solid-state proton transport. Crystallographic study divulged a hydrogen-bonded layered framework in which the uncoordinated −COOH groups project toward one-dimensional channels, providing accessible sites for interaction with guest water molecules. The activated framework (FCG-7a) exhibits good hydrolytic and thermal stability, a lower water contact angle of 48.6°, and a proton conductivity of 1.25 × 10–3 S cm–1 at 80 °C and 95% relative humidity (RH). The low activation energy (0.22 eV) is in agreement with a predominantly Grotthuss-type proton-hopping mechanism. Proton transport is strongly humidity-dependent, with conductivity increasing approximately 1600-fold from 60% to 95% RH at 80 °C, highlighting the participation of confined water molecules in establishing extended hydrogen-bonding pathways. To evaluate the contribution of pendant −COOH groups, a structurally analogous framework, FCG-10, lacking pendant carboxylic acid functionality, was prepared through a molecular-scissoring strategy. FCG-10a exhibits a lower conductivity of 3.5 × 10–4 S cm–1 under identical conditions. These results highlight a structure-guided strategy wherein accessible acidic sites and water-mediated hydrogen-bonding networks promote proton transport in crystalline frameworks
- 8 June 2026
- Published by Wiley in Journal of Polymer Science
Modulated Blending of Sulfonated Polyether Ether Ketone and Polystyrene‐Ethylene‐Butylene Styrene to Form a Stable Polymer Electrolyte in Proton Exchange Membrane Fuel Cells
Sulfonated polyether ether ketone (SPEEK) and sulfonated polystyrene–ethylene–butylene–styrene (SPSEBS) blend membranes were developed as fluorine‐free proton exchange membranes (PEMs) for fuel cell applications, with the aim of balancing proton conductivity and long‐term durability. Structural and morphological analyses confirmed good miscibility and uniform phase distribution at low SPSEBS loadings. Incorporation of SPSEBS improved membrane flexibility, toughness, and oxidative stability while maintaining adequate ion exchange capacity and hydration. Pristine SPEEK exhibited the highest proton conductivity (0.15 S cm −1 at 90°C), whereas the SPEEK/SPSEBS (98–2) blend showed more stable polarization behavior and superior voltage retention during durability testing. The enhanced performance of the blend is attributed to improved mechanical integrity, moderated swelling, and greater resistance to oxidative degradation. These results demonstrate that controlled incorporation of SPSEBS provides an effective strategy to develop durable SPEEK‐based PEMs for long‐term PEMFC operation.
- 8 June 2026
- Published by Wiley in Journal of Polymer Science
Modulated Blending of Sulfonated Polyether Ether Ketone and Polystyrene‐Ethylene‐Butylene Styrene to Form a Stable Polymer Electrolyte in Proton Exchange Membrane Fuel Cells
Sulfonated polyether ether ketone (SPEEK) and sulfonated polystyrene–ethylene–butylene–styrene (SPSEBS) blend membranes were developed as fluorine‐free proton exchange membranes (PEMs) for fuel cell applications, with the aim of balancing proton conductivity and long‐term durability. Structural and morphological analyses confirmed good miscibility and uniform phase distribution at low SPSEBS loadings. Incorporation of SPSEBS improved membrane flexibility, toughness, and oxidative stability while maintaining adequate ion exchange capacity and hydration. Pristine SPEEK exhibited the highest proton conductivity (0.15 S cm −1 at 90°C), whereas the SPEEK/SPSEBS (98–2) blend showed more stable polarization behavior and superior voltage retention during durability testing. The enhanced performance of the blend is attributed to improved mechanical integrity, moderated swelling, and greater resistance to oxidative degradation. These results demonstrate that controlled incorporation of SPSEBS provides an effective strategy to develop durable SPEEK‐based PEMs for long‐term PEMFC operation.
- 4 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 4 (3) , 1373-1388
Unveiling the Influence of Zeolite-Imidazole Framework Synthesis via the Precipitation Method on the Electrocatalytic Activity of Derived Carbon
- 4 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 4 (3) , 1373-1388
Unveiling the Influence of Zeolite-Imidazole Framework Synthesis via the Precipitation Method on the Electrocatalytic Activity of Derived Carbon
- 14 January 2026
- Published by Wiley in Advanced Sustainable Systems
- Vol. 10 (1)
Advances in Short‐Side‐Chain Perfluorosulfonic Acid Electrolytes for Proton Exchange Membrane Fuel Cells
This review discusses electrochemical energy systems with a focus on proton exchange membrane fuel cells (PEMFCs), highlighting the key role of proton exchange membranes (PEMs) in fuel cell performance. Among various PEM materials, Perfluorosulfonic acid (PFSA) ionomers are widely used due to their excellent chemical and proton‐conducting properties. The present review places special emphasis on short‐side‐chain (SSC) PFSA ionomers, which have gained attention over conventional long‐side‐chain (LSC) types like Nafion. SSC‐PFSAs offer improved thermal stability, higher crystallinity, and better proton conductivity, making them more suitable for demanding fuel cell conditions, especially under low humidity. The review also discusses important membrane properties such as water uptake, proton transport, and durability challenges. To address performance limitations, the use of composite membranes with suitable reinforcements and functional fillers is explored as a strategy to enhance conductivity, mechanical strength, and long‐term stability. Overall, this review sets the foundation for understanding the significance of SSC‐PFSA membranes and their potential in next‐generation fuel cells.
- 14 January 2026
- Published by Wiley in Advanced Sustainable Systems
- Vol. 10 (1)
Advances in Short‐Side‐Chain Perfluorosulfonic Acid Electrolytes for Proton Exchange Membrane Fuel Cells
This review discusses electrochemical energy systems with a focus on proton exchange membrane fuel cells (PEMFCs), highlighting the key role of proton exchange membranes (PEMs) in fuel cell performance. Among various PEM materials, Perfluorosulfonic acid (PFSA) ionomers are widely used due to their excellent chemical and proton‐conducting properties. The present review places special emphasis on short‐side‐chain (SSC) PFSA ionomers, which have gained attention over conventional long‐side‐chain (LSC) types like Nafion. SSC‐PFSAs offer improved thermal stability, higher crystallinity, and better proton conductivity, making them more suitable for demanding fuel cell conditions, especially under low humidity. The review also discusses important membrane properties such as water uptake, proton transport, and durability challenges. To address performance limitations, the use of composite membranes with suitable reinforcements and functional fillers is explored as a strategy to enhance conductivity, mechanical strength, and long‐term stability. Overall, this review sets the foundation for understanding the significance of SSC‐PFSA membranes and their potential in next‐generation fuel cells.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
Advances in electrocatalyst design for the ammonia oxidation reaction
This review highlights the evolution of ammonia oxidation electrocatalysis, bridging fundamental mechanistic insights with advanced catalyst engineering and emerging opportunities for practical implementation.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
Advances in electrocatalyst design for the ammonia oxidation reaction
This review highlights the evolution of ammonia oxidation electrocatalysis, bridging fundamental mechanistic insights with advanced catalyst engineering and emerging opportunities for practical implementation.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (57) , 14155-14170
Recent advances in Substrate Engineering of Platinum Single atom Catalysts for the Electrochemical Oxygen Reduction Reaction
The electrochemical reduction of oxygen molecules using platinum single-atom catalysts (Pt-SACs) is a promising approach for creating an efficient and cost-effective oxygen reduction reaction (ORR) in devices for electrochemical energy...
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (57) , 14155-14170
Recent advances in Substrate Engineering of Platinum Single atom Catalysts for the Electrochemical Oxygen Reduction Reaction
The electrochemical reduction of oxygen molecules using platinum single-atom catalysts (Pt-SACs) is a promising approach for creating an efficient and cost-effective oxygen reduction reaction (ORR) in devices for electrochemical energy...
- 26 October 2025
- Published by Wiley in Advanced Sustainable Systems
- Vol. 9 (12)
Engineering Co–N x Active Centers via Zinc‐Mediated Coordination in Hierarchically Porous Carbon for Enhanced Oxygen Reduction Reaction
Oxygen reduction reaction electrocatalysts are crucial for the advancement of high‐efficiency fuel cells and metal‐air batteries. However, the development of cost‐effective catalysts with high activities and durabilities remains challenging. Here, a cost‐effective method is presented for synthesising Co‐N x doped hierarchically porous carbon (ZC‐N/C) from a conducting polymer, delivering excellent ORR activity and stability. The high performance is attributed to the dense Co‐N x active sites formed via Zn ion incorporation, which increases the surface area and prevents cobalt oxide/sulfide formation, stabilising the Co 2+ /Co 3+ states. The synergistic effect of Zn, Co, and the N‐doped carbon matrix modifies the electronic structure, enhancing the reaction site density and boosting the ORR activity. ZC‐N/C exhibits ORR onset and half‐wave potentials that are comparable to those of commercial Pt/C under alkaline conditions. The doped Co/Zn‐N x moieties provide excellent stability, with a ΔE 1/2 of only 16 mV after 10 000 cycles (0.6 – 1 V vs RHE). As a cathode in an anion membrane fuel cell, ZC‐N/C achieves a peak power density of 215 mW cm −2 , similar to Pt/C. In a zinc‐air cell, it delivers 136 mW cm −2 power density and 780 mAh g Zn −1 capacity at 5 mA cm −2 demonstrating strong potential as a low‐cost ORR electrocatalyst.
- 26 October 2025
- Published by Wiley in Advanced Sustainable Systems
- Vol. 9 (12)
Engineering Co–N x Active Centers via Zinc‐Mediated Coordination in Hierarchically Porous Carbon for Enhanced Oxygen Reduction Reaction
Oxygen reduction reaction electrocatalysts are crucial for the advancement of high‐efficiency fuel cells and metal‐air batteries. However, the development of cost‐effective catalysts with high activities and durabilities remains challenging. Here, a cost‐effective method is presented for synthesising Co‐N x doped hierarchically porous carbon (ZC‐N/C) from a conducting polymer, delivering excellent ORR activity and stability. The high performance is attributed to the dense Co‐N x active sites formed via Zn ion incorporation, which increases the surface area and prevents cobalt oxide/sulfide formation, stabilising the Co 2+ /Co 3+ states. The synergistic effect of Zn, Co, and the N‐doped carbon matrix modifies the electronic structure, enhancing the reaction site density and boosting the ORR activity. ZC‐N/C exhibits ORR onset and half‐wave potentials that are comparable to those of commercial Pt/C under alkaline conditions. The doped Co/Zn‐N x moieties provide excellent stability, with a ΔE 1/2 of only 16 mV after 10 000 cycles (0.6 – 1 V vs RHE). As a cathode in an anion membrane fuel cell, ZC‐N/C achieves a peak power density of 215 mW cm −2 , similar to Pt/C. In a zinc‐air cell, it delivers 136 mW cm −2 power density and 780 mAh g Zn −1 capacity at 5 mA cm −2 demonstrating strong potential as a low‐cost ORR electrocatalyst.
Ions Conduction in pH Stable Interpenetrated‐Catenated Metal‐Organic Framework
The design of a rare combination of interpenetrated and catenated 3D+2D→3D MOF {[Cd 4 (dim) 4 (dht) 4 (H 2 O) 4 ](Sol) x } n ( 1 ), with a unique network and extreme pH stability, has been developed for exceptional ionic conduction across a wide range of temperature and humidity conditions. The bare pore derivative of 1 ( 1′) features remarkable structural flexibility and large pores accessible to encapsulate molecules such as NH 3 , HCl, and KOH, enabling it to function as an efficient conductor for both proton and hydroxide ions. 1′ demonstrates substantial thermal‐influenced proton conductivity of 4.6 × 10 −3 S cm −1 at 80°C and 95% RH, which is significantly enhanced by the encapsulation of guest molecules, 1′@NH 3 and 1′@HCl . 1′@NH 3 exhibits a proton conductivity of 3 × 10 −2 S cm −1 at 80°C and 95%RH, while the highly polar 1′@HCl achieves 1.21 S cm −1 . The 30°C (room temperature) proton conductivity of 1′@HCl is highly remarkable, reaching 6.8 × 10 −1 S cm −1 at 95%RH, representing one of the highest values reported for MOFs to date. Similarly, 1′@KOH exhibits hydroxide ion conduction, rising from 2.8 × 10 −1 S cm −1 at 25°C to 7.6 × 10 −1 S cm −1 at 80°C in 95%RH, further establishing its performance as one of the highest reported so far.
Ions Conduction in pH Stable Interpenetrated‐Catenated Metal‐Organic Framework
The design of a rare combination of interpenetrated and catenated 3D+2D→3D MOF {[Cd 4 (dim) 4 (dht) 4 (H 2 O) 4 ](Sol) x } n ( 1 ), with a unique network and extreme pH stability, has been developed for exceptional ionic conduction across a wide range of temperature and humidity conditions. The bare pore derivative of 1 ( 1′) features remarkable structural flexibility and large pores accessible to encapsulate molecules such as NH 3 , HCl, and KOH, enabling it to function as an efficient conductor for both proton and hydroxide ions. 1′ demonstrates substantial thermal‐influenced proton conductivity of 4.6 × 10 −3 S cm −1 at 80°C and 95% RH, which is significantly enhanced by the encapsulation of guest molecules, 1′@NH 3 and 1′@HCl . 1′@NH 3 exhibits a proton conductivity of 3 × 10 −2 S cm −1 at 80°C and 95%RH, while the highly polar 1′@HCl achieves 1.21 S cm −1 . The 30°C (room temperature) proton conductivity of 1′@HCl is highly remarkable, reaching 6.8 × 10 −1 S cm −1 at 95%RH, representing one of the highest values reported for MOFs to date. Similarly, 1′@KOH exhibits hydroxide ion conduction, rising from 2.8 × 10 −1 S cm −1 at 25°C to 7.6 × 10 −1 S cm −1 at 80°C in 95%RH, further establishing its performance as one of the highest reported so far.
- Open Access
- 6 August 2025
- Published by Royal Society of Chemistry (RSC) in RSC Applied Polymers
- Vol. 3 (5) , 1376-1384
Short-side-chain composite membranes with polyaminobenzene sulfonic acid-enriched single-walled carbon nanotubes for polymer electrolyte fuel cells
The zwitterionic interaction in PABS-SWCNTs and their uniform dispersion in SSC-PFSA significantly improves the composite membrane ionic conductivity and hydrogen fuel cell performance at low humidity.
- 6 August 2025
- Published by Royal Society of Chemistry (RSC) in RSC Applied Polymers
- Vol. 3 (5) , 1376-1384
Open AccessShort-side-chain composite membranes with polyaminobenzene sulfonic acid-enriched single-walled carbon nanotubes for polymer electrolyte fuel cells
The zwitterionic interaction in PABS-SWCNTs and their uniform dispersion in SSC-PFSA significantly improves the composite membrane ionic conductivity and hydrogen fuel cell performance at low humidity.