Ruifeng Dong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ruifeng Dong has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
- Peiying Zhou
School of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot 010051, China
4 shared publications - Xiong Yang
Technical Center of Inner Mongolia Baotou Steel Union Co., Ltd., Baotou 014010, China
4 shared publications - Qingling Cui
State Key Laboratory of Digital Steel, Northeastern University, Shenyang, People’s Republic of China
3 shared publications - Xing Zhou
College of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot 010051, China
3 shared publications - Jian Li
College of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot 010051, China
2 shared publications - Jing Guo
The Rare Earth Steel Plates Plant of Baotou Iron and Steel Co., Ltd., Baotou 014010, China
2 shared publications
Latest Publications
- 27 March 2026
- Published by EDP Sciences in Metallurgical Research & Technology
- Vol. 123 (3) , 321
In-situ tracking of inclusion evolution in Ce-modified highstrength offshore steel: mechanisms governing mechanical performance
This study investigates the in-situ evolution of inclusions in rare-earth cerium (Ce)-treated highstrength offshore platform steel using high-temperature confocal scanning laser microscopy (CSLM). Integrated characterization via scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), thermodynamic modeling, and first-principles calculations elucidates the underlying mechanism through which inclusion engineering enhances mechanical performance. Ce addition effectively converts irregular MnS and MnS-Al 2 O 3 inclusions into spherical/ellipsoidal Ce–O–S composite particles. In situ observations indicate that Ce expands the austenite phase field and mitigates grain-boundary segregation. Thermodynamic analyses demonstrate improved stability of Ce-containing inclusions. First-principles calculations further reveal a significant reduction in the elastic modulus and hardness mismatch between these inclusions and the steel matrix, facilitating compatible plastic deformation and thereby elevating the low-temperature impact toughness. This conclusion is supported by complementary low-temperature impact tests and transmission electron microscopy examination of inclusions in fracture surfaces. Collectively, this work establishes a coherent mechanistic framework for Ce-driven performance enhancement in advanced offshore steels.
- 27 March 2026
- Published by EDP Sciences in Metallurgical Research & Technology
- Vol. 123 (3) , 321
In-situ tracking of inclusion evolution in Ce-modified highstrength offshore steel: mechanisms governing mechanical performance
This study investigates the in-situ evolution of inclusions in rare-earth cerium (Ce)-treated highstrength offshore platform steel using high-temperature confocal scanning laser microscopy (CSLM). Integrated characterization via scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), thermodynamic modeling, and first-principles calculations elucidates the underlying mechanism through which inclusion engineering enhances mechanical performance. Ce addition effectively converts irregular MnS and MnS-Al 2 O 3 inclusions into spherical/ellipsoidal Ce–O–S composite particles. In situ observations indicate that Ce expands the austenite phase field and mitigates grain-boundary segregation. Thermodynamic analyses demonstrate improved stability of Ce-containing inclusions. First-principles calculations further reveal a significant reduction in the elastic modulus and hardness mismatch between these inclusions and the steel matrix, facilitating compatible plastic deformation and thereby elevating the low-temperature impact toughness. This conclusion is supported by complementary low-temperature impact tests and transmission electron microscopy examination of inclusions in fracture surfaces. Collectively, this work establishes a coherent mechanistic framework for Ce-driven performance enhancement in advanced offshore steels.
- 29 December 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (20) , 19665-19674
Synergistic Regulation of Microstructural Evolution and Plastic Instability by Trace Ce in Automotive Steels for New Energy Vehicles
- 29 December 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (20) , 19665-19674
Synergistic Regulation of Microstructural Evolution and Plastic Instability by Trace Ce in Automotive Steels for New Energy Vehicles
- 10 November 2025
- Published by Springer Nature in High Temperature Corrosion of Materials
- Vol. 102 (6) , 1-23
Effect of Al on the Oxidation of Grain Boundaries During Hot-Rolled Coiling of Press Hardening Steel
- 10 November 2025
- Published by Springer Nature in High Temperature Corrosion of Materials
- Vol. 102 (6) , 1-23
Effect of Al on the Oxidation of Grain Boundaries During Hot-Rolled Coiling of Press Hardening Steel
- 5 November 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (14) , 14257-14267
Effect of Short-Term Solution Treatment on Plastic Deformation Mechanism of GH4720Li Superalloy
- 5 November 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (14) , 14257-14267
Effect of Short-Term Solution Treatment on Plastic Deformation Mechanism of GH4720Li Superalloy
- 2 September 2025
- Published by Elsevier in Materials Letters
- Vol. 403
Effects of rare earth Ce microalloying on inclusions and texture of medium manganese automobile steel
- 2 September 2025
- Published by Elsevier in Materials Letters
- Vol. 403
Effects of rare earth Ce microalloying on inclusions and texture of medium manganese automobile steel
- Open Access
- 11 August 2025
- Published by Springer Nature in Research Square
Effect of Al on the oxidation of grain boundaries during hot-rolled coiling of press hardening steel
Press hardening steel (PHS) is the most widely used material in automotive white bodies owing to its excellent formability and low springback. While replacing Ti with Al ensures the hardenability of PHS without compromising its toughness, grain boundary oxidation inevitably occurs during hot-rolled coiling. This phenomenon, driven by the oxygen affinity of alloying elements such as Si and Mn, adversely affects subsequent processing. Current research predominantly focuses on the mechanisms by which Si and Mn contribute to grain boundary oxidation, whereas the influence of Al has seldom been explored. In this study, tube-sealed heating was employed to simulate the hot-rolled coiling process, specifically investigating the effect of Al on grain boundary oxidation. The results demonstrate that Al inhibits grain boundary oxidation through the following mechanisms: Al reduces the oxygen adsorption rate at the scale/matrix interface, thereby lowering the oxidation rate; Al promotes decarburization and facilitates the enrichment of Si and Mn at the scale/matrix interface. This decarburization accelerates the dissociation of FeO, and the majority of the dissociated oxygen ions combine with the enriched Si and Mn at the interface to form oxides. Consequently, less oxygen enters the steel matrix.
- 11 August 2025
- Published by Springer Nature in Research Square
Open AccessEffect of Al on the oxidation of grain boundaries during hot-rolled coiling of press hardening steel
Press hardening steel (PHS) is the most widely used material in automotive white bodies owing to its excellent formability and low springback. While replacing Ti with Al ensures the hardenability of PHS without compromising its toughness, grain boundary oxidation inevitably occurs during hot-rolled coiling. This phenomenon, driven by the oxygen affinity of alloying elements such as Si and Mn, adversely affects subsequent processing. Current research predominantly focuses on the mechanisms by which Si and Mn contribute to grain boundary oxidation, whereas the influence of Al has seldom been explored. In this study, tube-sealed heating was employed to simulate the hot-rolled coiling process, specifically investigating the effect of Al on grain boundary oxidation. The results demonstrate that Al inhibits grain boundary oxidation through the following mechanisms: Al reduces the oxygen adsorption rate at the scale/matrix interface, thereby lowering the oxidation rate; Al promotes decarburization and facilitates the enrichment of Si and Mn at the scale/matrix interface. This decarburization accelerates the dissociation of FeO, and the majority of the dissociated oxygen ions combine with the enriched Si and Mn at the interface to form oxides. Consequently, less oxygen enters the steel matrix.
- Open Access
- 1 August 2025
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3080 (1) , 012064
Effect of annealing temperatures on microstructure and properties of rare earth microalloyed medium manganese automobile steel
An ultra-high strength cold-formed automobile steel containing 48 ppm rare earth Ce was designed based on 0.1C-5Mn medium manganese steel. The microstructure and properties of the material were analyzed using scanning electron microscopy (SEM), X-ray diffraction (XRD), and a universal tensile testing machine, focusing on the austenite reverse phase transformation annealing process. The effects of different annealing temperatures on the microstructure and properties of rare earth microalloyed medium manganese automobile steel were investigated. The experimental results show that the microstructure of the experimental steel is mainly ferrite, retained austenite and new martensite. The comprehensive mechanical properties are the best when annealed at 800 °C -5 min / 640 °C -15 min. The residual austenite content of the experimental steel reaches 25.77 %, and the yield strength is 896 MPa, and the tensile strength is 1198 MPa, and the elongation is 33.24 %, and the multiplication of strength and plastic is 39.82 GPa ·%.
- 1 August 2025
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3080 (1) , 012064
Open AccessEffect of annealing temperatures on microstructure and properties of rare earth microalloyed medium manganese automobile steel
An ultra-high strength cold-formed automobile steel containing 48 ppm rare earth Ce was designed based on 0.1C-5Mn medium manganese steel. The microstructure and properties of the material were analyzed using scanning electron microscopy (SEM), X-ray diffraction (XRD), and a universal tensile testing machine, focusing on the austenite reverse phase transformation annealing process. The effects of different annealing temperatures on the microstructure and properties of rare earth microalloyed medium manganese automobile steel were investigated. The experimental results show that the microstructure of the experimental steel is mainly ferrite, retained austenite and new martensite. The comprehensive mechanical properties are the best when annealed at 800 °C -5 min / 640 °C -15 min. The residual austenite content of the experimental steel reaches 25.77 %, and the yield strength is 896 MPa, and the tensile strength is 1198 MPa, and the elongation is 33.24 %, and the multiplication of strength and plastic is 39.82 GPa ·%.
- Open Access
Effect of the Rare Earth Element Cerium on the Corrosion Resistance of Steel for an Offshore Platform in a Simulated Marine Atmospheric Environment
This study investigated the corrosion behavior and mechanism of offshore platform steel in a simulated marine atmospheric environment using electrochemical analysis, phase analysis, and rust layer characterization. The findings demonstrate that the addition of trace amounts of the rare earth element Ce significantly enhances the steel’s corrosion resistance in the marine environment and effectively reduces the corrosion rate. The addition of Ce promotes the enrichment of Cr in the inner rust layer and forms a dense protective rust layer, thereby preventing the rust layer from falling off, as well as hindering the penetration of oxygen ions. Phase analysis and electrochemical studies further confirmed that the addition of rare earth Ce optimized the structure of the rust layer, improved the matrix protection effect, and enhanced the corrosion resistance of the steel. The crystal structure of the rust layer and the stability between the matrix were simulated by first principles. The results show that the addition of rare earth enhances the bonding force and compactness of the steel matrix and the rust layer, thereby improving corrosion resistance.
Open AccessEffect of the Rare Earth Element Cerium on the Corrosion Resistance of Steel for an Offshore Platform in a Simulated Marine Atmospheric Environment
This study investigated the corrosion behavior and mechanism of offshore platform steel in a simulated marine atmospheric environment using electrochemical analysis, phase analysis, and rust layer characterization. The findings demonstrate that the addition of trace amounts of the rare earth element Ce significantly enhances the steel’s corrosion resistance in the marine environment and effectively reduces the corrosion rate. The addition of Ce promotes the enrichment of Cr in the inner rust layer and forms a dense protective rust layer, thereby preventing the rust layer from falling off, as well as hindering the penetration of oxygen ions. Phase analysis and electrochemical studies further confirmed that the addition of rare earth Ce optimized the structure of the rust layer, improved the matrix protection effect, and enhanced the corrosion resistance of the steel. The crystal structure of the rust layer and the stability between the matrix were simulated by first principles. The results show that the addition of rare earth enhances the bonding force and compactness of the steel matrix and the rust layer, thereby improving corrosion resistance.
- 2 April 2025
- Published by Wiley in Steel Research International
- Vol. 96 (11) , 130-140
Effect of Annealing Treatment on Mechanical Properties and Stamping Formability of Cold‐Rolled Medium‐Manganese Automobile Steel
Austenite reverse transformation (ART) and intercritical annealing (IA) are two common heat treatment processes for advanced high‐strength medium‐manganese automobile steel. In this article, the volume fraction of residual austenite, mechanical properties, formability, and microstructure of 0.1C‐5Mn automobile steel under two heat treatments are systematically studied by X‐ray diffractometer, universal tensile testing machine, scanning electron microscope (SEM), and transmission electron microscope (TEM). The results show that the microstructure of the experimental steel after two annealing processes is martensite, ferrite, and residual austenite. With the increase of annealing temperature and time, the volume fraction of residual austenite increases first and then decreases. When holding at 640 °C for 20 min, the volume fraction of residual austenite reaches the maximum, and the volume fraction of residual austenite obtained by the IA process is 8.41% higher than that of the ART process. With the increase in annealing temperature and time, the yield strength decreases, the tensile strength increases gradually, and the elongation and the multiplication of strength and plastic increase first and then decrease. When holding at 640 °C for 20 min, the comprehensive mechanical properties are the best. Compared with the ART process, the yield strength of the experimental steel under the IA process is increased by 16.93%, the tensile strength is increased by 2.04%, the elongation is increased by 6.98%, and the multiplication of strength and plastic is increased by 9.17%. When holding at 640 °C for 20 min, the {100} texture of the experimental steel treated by the IA process is 18.79% lower than that of the ART process, while the {110} texture and {111} texture are 20.75% and 28.55% higher, respectively. Compared with the ART process, the IA process not only eliminates the quenching treatment but also enables the experimental steel to obtain a better comprehensive performance.
- 2 April 2025
- Published by Wiley in Steel Research International
- Vol. 96 (11) , 130-140
Effect of Annealing Treatment on Mechanical Properties and Stamping Formability of Cold‐Rolled Medium‐Manganese Automobile Steel
Austenite reverse transformation (ART) and intercritical annealing (IA) are two common heat treatment processes for advanced high‐strength medium‐manganese automobile steel. In this article, the volume fraction of residual austenite, mechanical properties, formability, and microstructure of 0.1C‐5Mn automobile steel under two heat treatments are systematically studied by X‐ray diffractometer, universal tensile testing machine, scanning electron microscope (SEM), and transmission electron microscope (TEM). The results show that the microstructure of the experimental steel after two annealing processes is martensite, ferrite, and residual austenite. With the increase of annealing temperature and time, the volume fraction of residual austenite increases first and then decreases. When holding at 640 °C for 20 min, the volume fraction of residual austenite reaches the maximum, and the volume fraction of residual austenite obtained by the IA process is 8.41% higher than that of the ART process. With the increase in annealing temperature and time, the yield strength decreases, the tensile strength increases gradually, and the elongation and the multiplication of strength and plastic increase first and then decrease. When holding at 640 °C for 20 min, the comprehensive mechanical properties are the best. Compared with the ART process, the yield strength of the experimental steel under the IA process is increased by 16.93%, the tensile strength is increased by 2.04%, the elongation is increased by 6.98%, and the multiplication of strength and plastic is increased by 9.17%. When holding at 640 °C for 20 min, the {100} texture of the experimental steel treated by the IA process is 18.79% lower than that of the ART process, while the {110} texture and {111} texture are 20.75% and 28.55% higher, respectively. Compared with the ART process, the IA process not only eliminates the quenching treatment but also enables the experimental steel to obtain a better comprehensive performance.
- Open Access
Effect of Trace Rare Earth Elements (Ce) on the Corrosion Resistance of High-Strength Weathering Bridge Steels
In this study, Q370qENH high-strength weathering bridge steel was used as the base material. The corrosion experiment in a marine atmosphere was simulated by the salt spray test, and the outdoor atmospheric exposure corrosion experiment and electrochemical method test were carried out. The corrosion behavior of Q370qENH high-strength weathering bridge steel in a marine atmosphere was studied using electron probe microanalysis (EPMA), field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and other surface testing techniques. The results show that the corrosion rate of the steel gradually decreases with the increase in the content of trace rare earth elements. Ce played a role in the modification of inclusions so that MnS was modified into rare earth composite inclusions, which slowed down the occurrence of corrosion. The enrichment of Cu alloy elements in the inner rust layer of the rare earth experimental steel improves the compactness of the rust layer, and the thickness of the inner rust layer is increased by 42%, which enhances the stability of the rust layer. With the increase in cerium, the protection coefficient α/γ* of the rust layer of experimental steel increases, indicating that the corrosion resistance of the material is improved. In addition, the electrochemical results show that the addition of rare earth elements in Q370qENH steel will lead to a positive shift in the electrochemical self-corrosion potential, a larger impedance radius of the steel rust layer, and a stronger protective effect. Due to the addition of trace cerium, the seawater corrosion resistance of the test steel is improved.
Open AccessEffect of Trace Rare Earth Elements (Ce) on the Corrosion Resistance of High-Strength Weathering Bridge Steels
In this study, Q370qENH high-strength weathering bridge steel was used as the base material. The corrosion experiment in a marine atmosphere was simulated by the salt spray test, and the outdoor atmospheric exposure corrosion experiment and electrochemical method test were carried out. The corrosion behavior of Q370qENH high-strength weathering bridge steel in a marine atmosphere was studied using electron probe microanalysis (EPMA), field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and other surface testing techniques. The results show that the corrosion rate of the steel gradually decreases with the increase in the content of trace rare earth elements. Ce played a role in the modification of inclusions so that MnS was modified into rare earth composite inclusions, which slowed down the occurrence of corrosion. The enrichment of Cu alloy elements in the inner rust layer of the rare earth experimental steel improves the compactness of the rust layer, and the thickness of the inner rust layer is increased by 42%, which enhances the stability of the rust layer. With the increase in cerium, the protection coefficient α/γ* of the rust layer of experimental steel increases, indicating that the corrosion resistance of the material is improved. In addition, the electrochemical results show that the addition of rare earth elements in Q370qENH steel will lead to a positive shift in the electrochemical self-corrosion potential, a larger impedance radius of the steel rust layer, and a stronger protective effect. Due to the addition of trace cerium, the seawater corrosion resistance of the test steel is improved.