Chulhee Lim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chulhee Lim has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Hyeong Jun Kim
Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea
9 shared publications Jin-Woo Lee
Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, 34141, Republic of Korea
4 shared publications- Seungjin Lee
Photoenergy Research Center, Korea Research Institute of Chemical Technology (KRICT), Daejeon, 34114, Republic of Korea
4 shared publications Daehee Han
Department of Chemical and Biomolecular Engineering Korea Advanced Institute of Science and Technology (KAIST) Daejeon 34141 Republic of Korea
3 shared publicationsSoodeok Seo
Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea
3 shared publications- Taek-Soo Kim
Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea
3 shared publications
Latest Publications
- 29 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (4) , 6648-6658
Impact of meta- and para-Direction External Side Chains in Y-Series Acceptors on the Molecular Packing and Charge Carrier Dynamics of Organic Photovoltaics
The side-chain directions in nonfullerene acceptors (NFAs) strongly influence the intermolecular interactions in NFAs; however, the influence of these side chains on the morphologies and charge carrier dynamics of Y6-based acceptors remains underexplored. In this study, we synthesize four distinct Y6-based acceptors, i.e., meta-HOP–Y6-F (mF), meta-HOP–Y6-Cl (mCl), para-HOP–Y6-F (pF), and para-HOP–Y6-Cl (pCl), with outer side chains of alkoxy-2-ethylhexyl attached at the meta or para positions. Devices containing the meta-position acceptors blended with the polymer donor PM6 achieve power conversion efficiencies (PCEs) at least 1.27-fold higher than those of devices containing para-position acceptors. The enhanced performance can be attributed to the formation of donor–acceptor domains that are advantageous for charge carrier generation, transport, and collection. This is due to variations in phase aggregation that result from steric hindrance effects at the meta- and para-position acceptors. As a result, meta-position acceptors with lower steric hindrance improved π–π and lamellar stacking, whereas the para-position acceptors encountered excessive steric hindrance, reducing their photovoltaic efficiencies. Additionally, the meta-position acceptors demonstrate long charge carrier lifetimes, which suppress recombination in the charge transfer state and promote efficient charge separation. These results underline the critical role of side-chain direction in optimizing Y6-based acceptors for improving photovoltaic performance.
- 29 December 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (4) , 6648-6658
Impact of meta- and para-Direction External Side Chains in Y-Series Acceptors on the Molecular Packing and Charge Carrier Dynamics of Organic Photovoltaics
The side-chain directions in nonfullerene acceptors (NFAs) strongly influence the intermolecular interactions in NFAs; however, the influence of these side chains on the morphologies and charge carrier dynamics of Y6-based acceptors remains underexplored. In this study, we synthesize four distinct Y6-based acceptors, i.e., meta-HOP–Y6-F (mF), meta-HOP–Y6-Cl (mCl), para-HOP–Y6-F (pF), and para-HOP–Y6-Cl (pCl), with outer side chains of alkoxy-2-ethylhexyl attached at the meta or para positions. Devices containing the meta-position acceptors blended with the polymer donor PM6 achieve power conversion efficiencies (PCEs) at least 1.27-fold higher than those of devices containing para-position acceptors. The enhanced performance can be attributed to the formation of donor–acceptor domains that are advantageous for charge carrier generation, transport, and collection. This is due to variations in phase aggregation that result from steric hindrance effects at the meta- and para-position acceptors. As a result, meta-position acceptors with lower steric hindrance improved π–π and lamellar stacking, whereas the para-position acceptors encountered excessive steric hindrance, reducing their photovoltaic efficiencies. Additionally, the meta-position acceptors demonstrate long charge carrier lifetimes, which suppress recombination in the charge transfer state and promote efficient charge separation. These results underline the critical role of side-chain direction in optimizing Y6-based acceptors for improving photovoltaic performance.
- 13 November 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (1) , 230-242
High-performance, ambient-processable organic solar cells achieved by single terpene-based entirely eco-friendly process
We developed entirely eco-friendly organic solar cells using eucalyptol (Eu) as a single terpene solvent, achieving a record-high PCE (15.1%). The Eu processing enables fabrication in air and enhances stability, promising for sustainable production.
- 13 November 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (1) , 230-242
High-performance, ambient-processable organic solar cells achieved by single terpene-based entirely eco-friendly process
We developed entirely eco-friendly organic solar cells using eucalyptol (Eu) as a single terpene solvent, achieving a record-high PCE (15.1%). The Eu processing enables fabrication in air and enhances stability, promising for sustainable production.
- Open Access
- 1 August 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (51)
Tetramerized Small‐Molecule Acceptor for Organic Solar Cells with Enhanced Efficiency, Stability, and Mechanical Robustness: Impact of Chain Length and Dispersity Effects
Discrete dimer or multimer acceptors have enhanced the stability of organic solar cells (OSCs) due to their slow diffusion kinetics resulting from their large molecular sizes. However, development of multimer acceptors with chain length longer than trimers has been challenging, which often require multistep reactions with low synthetic yield. In this study, a new discrete tetramer acceptor (TetA) using one‐pot reaction and subsequent purification processes is developed. During the purification, dimer (DA) and trimer acceptor (TA) are also obtained. The OSCs for TetA demonstrate a higher power conversion efficiency (PCE) of 16.14% than those for the discrete acceptors with shorter chain lengths, such as monomer acceptor (MA, 12.85%), DA (14.31%), and TA (15.10%). Additionally, despite having a similar number‐average molecular weight, TetA‐based OSCs exhibit a significantly higher PCE (16.14%) compared to OSCs based on a mixture of the acceptors (MixA) with dispersity (10.72%). Furthermore, the TetA‐based OSCs have the highest photostability and mechanical robustness among the series. For example, TetA‐based OSCs demonstrate superior photostability (t70% lifetime = 2180 h under 1‐sun illumination) and mechanical robustness (crack‐onset strain (COS) = 8%) compared to those based on MA (t70% = 220 h, and COS = 2%), or MixA (t70% = 745 h, and COS = 6%).
- 1 August 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (51)
Open AccessTetramerized Small‐Molecule Acceptor for Organic Solar Cells with Enhanced Efficiency, Stability, and Mechanical Robustness: Impact of Chain Length and Dispersity Effects
Discrete dimer or multimer acceptors have enhanced the stability of organic solar cells (OSCs) due to their slow diffusion kinetics resulting from their large molecular sizes. However, development of multimer acceptors with chain length longer than trimers has been challenging, which often require multistep reactions with low synthetic yield. In this study, a new discrete tetramer acceptor (TetA) using one‐pot reaction and subsequent purification processes is developed. During the purification, dimer (DA) and trimer acceptor (TA) are also obtained. The OSCs for TetA demonstrate a higher power conversion efficiency (PCE) of 16.14% than those for the discrete acceptors with shorter chain lengths, such as monomer acceptor (MA, 12.85%), DA (14.31%), and TA (15.10%). Additionally, despite having a similar number‐average molecular weight, TetA‐based OSCs exhibit a significantly higher PCE (16.14%) compared to OSCs based on a mixture of the acceptors (MixA) with dispersity (10.72%). Furthermore, the TetA‐based OSCs have the highest photostability and mechanical robustness among the series. For example, TetA‐based OSCs demonstrate superior photostability (t70% lifetime = 2180 h under 1‐sun illumination) and mechanical robustness (crack‐onset strain (COS) = 8%) compared to those based on MA (t70% = 220 h, and COS = 2%), or MixA (t70% = 745 h, and COS = 6%).
- 16 July 2024
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 36 (15) , 7541-7551
Investigating the Effects of Hydrogen Bonding on Mechanical and Electrical Properties of n-Type Semicrystalline Polymers
- 16 July 2024
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 36 (15) , 7541-7551
Investigating the Effects of Hydrogen Bonding on Mechanical and Electrical Properties of n-Type Semicrystalline Polymers
- Open Access
- 21 February 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (14) , 8205-8215
Benzobisthiazole-substituted terpolymers for non-halogenated solvent-processed polymer solar cells with enhanced efficiency, thermal stability and mechanical robustness
We synthesize a series of benzobisthiazole-incorporating polymer donors (PM6-DTzB X ) to achieve efficient, thermally-stable, mechanically-robust polymer solar cells (PSCs) by non-halogenated solution processing.
- 21 February 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (14) , 8205-8215
Open AccessBenzobisthiazole-substituted terpolymers for non-halogenated solvent-processed polymer solar cells with enhanced efficiency, thermal stability and mechanical robustness
We synthesize a series of benzobisthiazole-incorporating polymer donors (PM6-DTzB X ) to achieve efficient, thermally-stable, mechanically-robust polymer solar cells (PSCs) by non-halogenated solution processing.
- 1 September 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (37) , 20031-20042
Design of mechanically-robust naphthalenediimide-based polymer additives for high-performance, intrinsically-stretchable polymer solar cells
High-molecular-weight electro-active polymer acceptor (PA) is effective in simultaneously increasing photovoltaic performance and mechanical integrity of polymer solar cells (PSCs) based on a polymer donor (PD) and a small molecule acceptor (SMA). In this work, we develop a new naphthalene diimide (NDI)-based PA, named P(NDI2OD-TCVT), and employ it as a PA additive in a PD:SMA blend to fabricate high-performance and mechanically robust PSCs. Copolymerization of NDI, bithiophene, and cyano-vinylene units ensures the n-type characteristics of the P(NDI2OD-TCVT). Noticeably, regio-random attachment of the cyano-vinylene group alleviates the crystalline nature of the NDI-based polymer, providing inter-domain bridges by being a tie molecule. As we vary the weight-average molecular weight (Mw) of the polymer, we find that the backbone structure enables a significant reduction of the critical molecular weight that ensures mechanical robustness. High crack-onset strain (COS) of 30.1% is achieved in the P(NDI2OD-TCVT) film with a relatively low Mw of 109 kg mol−1, which is a stark contrast to the COS value (1.1%) of the reference P(NDI2OD-T2) film with similar Mw of 126 kg mol−1. In addition, we find that incorporation of P(NDI2OD-TCVT) enhances the photovoltaic performance of the PD:SMA-based PSCs, achieving a high power conversion efficiency (PCE) of 16.9%. Benefitted from the significantly enhanced mechanical properties of P(NDI2OD-TCVT), we also demonstrate the highly efficient and intrinsically stretchable polymer solar cells (IS-PSCs). The IS-PSCs with 10 wt% of P(NDI2OD-TCVT) featured a PCE of 12.6% and retained 85% of the initial PCE after 100 cycles of stretching at 20% strain and releasing, outperforming those of P(NDI2OD-T2)-based IS-PSCs.
- 1 September 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (37) , 20031-20042
Design of mechanically-robust naphthalenediimide-based polymer additives for high-performance, intrinsically-stretchable polymer solar cells
High-molecular-weight electro-active polymer acceptor (PA) is effective in simultaneously increasing photovoltaic performance and mechanical integrity of polymer solar cells (PSCs) based on a polymer donor (PD) and a small molecule acceptor (SMA). In this work, we develop a new naphthalene diimide (NDI)-based PA, named P(NDI2OD-TCVT), and employ it as a PA additive in a PD:SMA blend to fabricate high-performance and mechanically robust PSCs. Copolymerization of NDI, bithiophene, and cyano-vinylene units ensures the n-type characteristics of the P(NDI2OD-TCVT). Noticeably, regio-random attachment of the cyano-vinylene group alleviates the crystalline nature of the NDI-based polymer, providing inter-domain bridges by being a tie molecule. As we vary the weight-average molecular weight (Mw) of the polymer, we find that the backbone structure enables a significant reduction of the critical molecular weight that ensures mechanical robustness. High crack-onset strain (COS) of 30.1% is achieved in the P(NDI2OD-TCVT) film with a relatively low Mw of 109 kg mol−1, which is a stark contrast to the COS value (1.1%) of the reference P(NDI2OD-T2) film with similar Mw of 126 kg mol−1. In addition, we find that incorporation of P(NDI2OD-TCVT) enhances the photovoltaic performance of the PD:SMA-based PSCs, achieving a high power conversion efficiency (PCE) of 16.9%. Benefitted from the significantly enhanced mechanical properties of P(NDI2OD-TCVT), we also demonstrate the highly efficient and intrinsically stretchable polymer solar cells (IS-PSCs). The IS-PSCs with 10 wt% of P(NDI2OD-TCVT) featured a PCE of 12.6% and retained 85% of the initial PCE after 100 cycles of stretching at 20% strain and releasing, outperforming those of P(NDI2OD-T2)-based IS-PSCs.
- 1 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (10) , 13656-13667
Sequentially Coated Wavy Nanowire Composite Transparent Electrode for Stretchable Solar Cells
Recent advances in fabricating stretchable and transparent electrodes have led to various techniques for establishing next-generation form-factor optoelectronic devices. Wavy Ag nanowire networks with large curvature radii are promising platforms as stretchable and transparent electrodes due to their high electrical conductivity and stretchability even at very high transparency. However, there are disadvantages such as intrinsic nonregular conductivity, large surface roughness, and nanowire oxidation in air. Here, we introduce electrically synergistic but mechanically independent composite electrodes by sequentially introducing conducting polymers and ionic liquids into the wavy Ag nanowire network to maintain the superior performance of the stretchable transparent electrode while ensuring overall conductivity, lower roughness, and long-term stability. In particular, plenty of ionic liquids can be incorporated into the uniformly coated conducting polymer so that the elastic modulus can be significantly lowered and sliding can occur at the nanowire interface, thereby obtaining the high mechanical stretchability of the composite electrode. Finally, as a result of applying the composite film as the stretchable transparent electrode of stretchable organic solar cells, the organic solar cell exhibits a high power conversion efficiency of 11.3% and 89% compared to the initial efficiency even at 20% tensile strain, demonstrating excellent stretching stability.
- 1 March 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (10) , 13656-13667
Sequentially Coated Wavy Nanowire Composite Transparent Electrode for Stretchable Solar Cells
Recent advances in fabricating stretchable and transparent electrodes have led to various techniques for establishing next-generation form-factor optoelectronic devices. Wavy Ag nanowire networks with large curvature radii are promising platforms as stretchable and transparent electrodes due to their high electrical conductivity and stretchability even at very high transparency. However, there are disadvantages such as intrinsic nonregular conductivity, large surface roughness, and nanowire oxidation in air. Here, we introduce electrically synergistic but mechanically independent composite electrodes by sequentially introducing conducting polymers and ionic liquids into the wavy Ag nanowire network to maintain the superior performance of the stretchable transparent electrode while ensuring overall conductivity, lower roughness, and long-term stability. In particular, plenty of ionic liquids can be incorporated into the uniformly coated conducting polymer so that the elastic modulus can be significantly lowered and sliding can occur at the nanowire interface, thereby obtaining the high mechanical stretchability of the composite electrode. Finally, as a result of applying the composite film as the stretchable transparent electrode of stretchable organic solar cells, the organic solar cell exhibits a high power conversion efficiency of 11.3% and 89% compared to the initial efficiency even at 20% tensile strain, demonstrating excellent stretching stability.
- 23 November 2022
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 55 (23) , 10395-10404
Composition-Tolerant Terpolymers for Efficient, Nonhalogenated Solvent-Processed Polymer Solar Cells
- 23 November 2022
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 55 (23) , 10395-10404
Composition-Tolerant Terpolymers for Efficient, Nonhalogenated Solvent-Processed Polymer Solar Cells