Zachary W. Schroeder
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zachary W. Schroeder has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Rik R. Tykwinski
Department of Chemistry, University of Alberta, 11227 Saskatchewan Drive, Edmonton, Alberta, Canada T6G 2G2
10 shared publications - Michael J. Ferguson
University of Alberta
7 shared publications - Dirk Michael Guldi
Department of Chemistry and Pharmacy, Profile Center FAU Solar, Interdisciplinary Center for Molecular Materials (ICMM), Friedrich-Alexander-Universität Erlangen-Nürnberg, Egerlandstraße 3, 91058 Erlangen, Germany
3 shared publications - Phillip M. Greißel
Department of Chemistry and Pharmacy and Interdisciplinary Center for Molecular Materials (ICMM), Friedrich-Alexander-University Erlangen-Nuremberg, Egerlandstraße 3, 91058 Erlangen, Germany
3 shared publications - Dominik Thiel
Department of Chemistry and Pharmacy, Profile Center FAU Solar, Interdisciplinary Center for Molecular Materials (ICMM), Friedrich-Alexander-Universität Erlangen-Nürnberg, Egerlandstraße 3, 91058 Erlangen, Germany
2 shared publications - Timothy Clark
Computer-Chemistry-Center, Department of Chemistry and Pharmacy, Friedrich-Alexander-University Erlangen-Nuernberg, Erlangen, Germany
2 shared publications
Latest Publications
- Open Access
- 27 May 2026
- Published by Wiley in Journal of Physical Organic Chemistry
- Vol. 39 (7)
Synthesis, Solubilization, and Photophysical Properties of Polyfluorinated Pentacene Dimers
A polyfluorinated pentacene dimer, linked with a 1,3‐diethynylphenylene spacer, was synthesized to investigate the effects of fluorination on the dynamics of singlet fission (SF). The incorporation of bulky 4,6‐substituents on the phenylene spacer was necessary to improve the solubility of the fluorinated dimers, toward easier purification and analysis. Photophysical characterization shows that the incorporation of fluorine at the peripheral positions of the pentacene moieties inhibits the solvent dependence of the excited state observed in a nonfluorinated pentacene reference compound. Computational analysis suggests that fluorination drives efficient intramolecular π‐stacking, limiting conformational flexibility. The results confirm that the reduction of polarizability and rotational freedom of the pentacene groups, imposed by fluorination, eliminates the influence of solvent polarity on singlet fission kinetics. The kinetic stability of the fluorinated and nonfluorinated dimers toward photosensitized endoperoxidation with O 2 is also assessed and shows that SF contributes to the stability of nonfluorinated pentacenes, but not necessarily to the stability of their fluorinated counterparts.
- 27 May 2026
- Published by Wiley in Journal of Physical Organic Chemistry
- Vol. 39 (7)
Open AccessSynthesis, Solubilization, and Photophysical Properties of Polyfluorinated Pentacene Dimers
A polyfluorinated pentacene dimer, linked with a 1,3‐diethynylphenylene spacer, was synthesized to investigate the effects of fluorination on the dynamics of singlet fission (SF). The incorporation of bulky 4,6‐substituents on the phenylene spacer was necessary to improve the solubility of the fluorinated dimers, toward easier purification and analysis. Photophysical characterization shows that the incorporation of fluorine at the peripheral positions of the pentacene moieties inhibits the solvent dependence of the excited state observed in a nonfluorinated pentacene reference compound. Computational analysis suggests that fluorination drives efficient intramolecular π‐stacking, limiting conformational flexibility. The results confirm that the reduction of polarizability and rotational freedom of the pentacene groups, imposed by fluorination, eliminates the influence of solvent polarity on singlet fission kinetics. The kinetic stability of the fluorinated and nonfluorinated dimers toward photosensitized endoperoxidation with O 2 is also assessed and shows that SF contributes to the stability of nonfluorinated pentacenes, but not necessarily to the stability of their fluorinated counterparts.
- 21 February 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (9) , 7293-7304
Verdazyl-Based Radicals for High-Field Dynamic Nuclear Polarization NMR
High-field dynamic nuclear polarization nuclear magnetic resonance (DNP NMR) spectroscopy transfers polarization from unpaired electrons in polarizing agents to nuclei of interest to boost NMR sensitivity. Verdazyl biradicals are a promising choice as polarizing agents because they have been found to generate narrower electron paramagnetic resonance (EPR) signals compared to nitroxide biradicals; an advantageous characteristic for high-field DNP when operating above 400 MHz/263 GHz. The use of verdazyl radicals as DNP polarizing agents has been very limited to date, yet, recent numerical simulations have predicted that verdazyl-nitroxide hybrid biradicals could be more effective polarizing agents than nitroxide-nitroxide biradicals. Herein, the syntheses of a series of verdazyl mono- and biradicals, as well as verdazyl-nitroxide biradicals are described. These radicals were examined in high-field DNP NMR experiments (600 MHz/395 GHz), by measuring 1H signal enhancements directly and through 13C{1H} cross-polarization experiments. X-band EPR, 1H DNP field profiles, and experiments to determine the nuclear build-up times were performed for verdazyl-nitroxide biradicals VerTEMPol and VerTEKol. These hybrid biradicals provide enhancements of up to 100-fold increased signal intensities (i.e., representing >104-fold time savings), approximately four times higher than that of the nitroxide biradical TEKPol, a commonly used polarizing agent in the field.
- 21 February 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (9) , 7293-7304
Verdazyl-Based Radicals for High-Field Dynamic Nuclear Polarization NMR
High-field dynamic nuclear polarization nuclear magnetic resonance (DNP NMR) spectroscopy transfers polarization from unpaired electrons in polarizing agents to nuclei of interest to boost NMR sensitivity. Verdazyl biradicals are a promising choice as polarizing agents because they have been found to generate narrower electron paramagnetic resonance (EPR) signals compared to nitroxide biradicals; an advantageous characteristic for high-field DNP when operating above 400 MHz/263 GHz. The use of verdazyl radicals as DNP polarizing agents has been very limited to date, yet, recent numerical simulations have predicted that verdazyl-nitroxide hybrid biradicals could be more effective polarizing agents than nitroxide-nitroxide biradicals. Herein, the syntheses of a series of verdazyl mono- and biradicals, as well as verdazyl-nitroxide biradicals are described. These radicals were examined in high-field DNP NMR experiments (600 MHz/395 GHz), by measuring 1H signal enhancements directly and through 13C{1H} cross-polarization experiments. X-band EPR, 1H DNP field profiles, and experiments to determine the nuclear build-up times were performed for verdazyl-nitroxide biradicals VerTEMPol and VerTEKol. These hybrid biradicals provide enhancements of up to 100-fold increased signal intensities (i.e., representing >104-fold time savings), approximately four times higher than that of the nitroxide biradical TEKPol, a commonly used polarizing agent in the field.
- 11 February 2025
- Published by American Chemical Society (ACS) in Organic Letters
- Vol. 27 (7) , 1714-1718
Synthesis of Acenes by Mechanochemical Reductive Aromatization
A Sn-mediated mechanochemical reductive aromatization of 1,4-dihydroxy- and 1,4-dimethoxy-cyclohexadienes has been used to form 12 acenes, including derivatives of benzene, anthracene, tetracene, pentacene, and anthradithiophene. This method has been developed to overcome issues faced during the formation of electron-deficient 1,4-dihydroxy- or 1,4-dimethoxy-cyclohexadienes under homogeneous conditions. While this method does not tolerate trimethylsilyl protecting groups for alkynes, it can provide a fast and easily set up alternative to homogeneous reductive aromatization.
- 11 February 2025
- Published by American Chemical Society (ACS) in Organic Letters
- Vol. 27 (7) , 1714-1718
Synthesis of Acenes by Mechanochemical Reductive Aromatization
A Sn-mediated mechanochemical reductive aromatization of 1,4-dihydroxy- and 1,4-dimethoxy-cyclohexadienes has been used to form 12 acenes, including derivatives of benzene, anthracene, tetracene, pentacene, and anthradithiophene. This method has been developed to overcome issues faced during the formation of electron-deficient 1,4-dihydroxy- or 1,4-dimethoxy-cyclohexadienes under homogeneous conditions. While this method does not tolerate trimethylsilyl protecting groups for alkynes, it can provide a fast and easily set up alternative to homogeneous reductive aromatization.
- Open Access
- 25 October 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (69) , e202402651
Sterically Hindered Derivatives of Pentacene and Octafluoropentacene
6,13‐Diethynylpentacene derivatives with sterically bulky substituents (Tr*, tris(3,5‐di‐tert‐butylphenyl)methyl groups) appended to the ethynyl moieties at the 6‐ and 13‐positions have been synthesized, as well as derivatives with electron‐withdrawing fluorine groups on the 1,2,3,4,8,9,10,11‐positions. These molecules are designed to investigate relationships between steric and electronic effects on the stability of pentacene toward endoperoxide formation via reaction with photosensitized oxygen in solution under ambient light (i. e., ‘laboratory’ conditions). It is evident from the study that stabilization through changes to the electronic characteristics of pentacene are more effective than the incorporation of sterically bulky groups at the acetylenic termini. Selected pentacene derivatives have been made into binary, amorphous films with the fullerene derivative PCBM to investigate the stability imparted by substituents against cycloaddition reactions. Overall, the introduction of steric protection through the incorporation of Tr* groups is not an efficient strategy for enhancing the persistence of pentacenes. Stabilization through fluorination proves successful for extending the lifetime of the pentacene derivatives by an order of magnitude in solution. Notably, the persistence of pentacene derivatives in solution can also be enhanced through the use of ethereal solvents stabilized with butylated hydroxy toluene (BHT) and/or an increased number of trialkylsilyl groups as substituents.
- 25 October 2024
- Published by Wiley in Chemistry – A European Journal
- Vol. 30 (69) , e202402651
Open AccessSterically Hindered Derivatives of Pentacene and Octafluoropentacene
6,13‐Diethynylpentacene derivatives with sterically bulky substituents (Tr*, tris(3,5‐di‐tert‐butylphenyl)methyl groups) appended to the ethynyl moieties at the 6‐ and 13‐positions have been synthesized, as well as derivatives with electron‐withdrawing fluorine groups on the 1,2,3,4,8,9,10,11‐positions. These molecules are designed to investigate relationships between steric and electronic effects on the stability of pentacene toward endoperoxide formation via reaction with photosensitized oxygen in solution under ambient light (i. e., ‘laboratory’ conditions). It is evident from the study that stabilization through changes to the electronic characteristics of pentacene are more effective than the incorporation of sterically bulky groups at the acetylenic termini. Selected pentacene derivatives have been made into binary, amorphous films with the fullerene derivative PCBM to investigate the stability imparted by substituents against cycloaddition reactions. Overall, the introduction of steric protection through the incorporation of Tr* groups is not an efficient strategy for enhancing the persistence of pentacenes. Stabilization through fluorination proves successful for extending the lifetime of the pentacene derivatives by an order of magnitude in solution. Notably, the persistence of pentacene derivatives in solution can also be enhanced through the use of ethereal solvents stabilized with butylated hydroxy toluene (BHT) and/or an increased number of trialkylsilyl groups as substituents.
- Open Access
- 21 October 2024
- Published by American Chemical Society (ACS) in ChemRxiv
The Synthesis of Acenes by Mechanochemical Reductive Aromatization
A Sn-mediated mechanochemical reductive aromatization of 1,4-dihydroxy- and 1,4-dimethoxy-cyclohexadienes has been used to form ten acenes, including derivatives of benzene, anthracene, tetracene, and pentacene. This method has been developed to overcome issues faced during the formation of electron-deficient 1,4-dihydroxy- or 1,4-dimethoxy-cyclohexadienes under homogeneous conditions. While this method does not tolerate trimethylsilyl protecting groups for alkynes, it can provide a fast, easy to set up alternative to homogeneous reductive aromatization.
- 21 October 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessThe Synthesis of Acenes by Mechanochemical Reductive Aromatization
A Sn-mediated mechanochemical reductive aromatization of 1,4-dihydroxy- and 1,4-dimethoxy-cyclohexadienes has been used to form ten acenes, including derivatives of benzene, anthracene, tetracene, and pentacene. This method has been developed to overcome issues faced during the formation of electron-deficient 1,4-dihydroxy- or 1,4-dimethoxy-cyclohexadienes under homogeneous conditions. While this method does not tolerate trimethylsilyl protecting groups for alkynes, it can provide a fast, easy to set up alternative to homogeneous reductive aromatization.
- 12 September 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (38) , 26586
Correction to “Controlling Interchromophore Coupling in Diamantane-Linked Pentacene Dimers To Create a ‘Binary’ Pair”
- 12 September 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (38) , 26586
Correction to “Controlling Interchromophore Coupling in Diamantane-Linked Pentacene Dimers To Create a ‘Binary’ Pair”
- Open Access
- 10 July 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Sterically-Hindered Derivatives of Pentacene and Octafluoropentacene
6,13-Diethynylpentacene derivatives with sterically bulky substituents (Tr*, tris(3,5-di-tert-butylphenyl)methyl groups) appended to the ethynyl moieties at the 6- and 13-positions have been synthesized, as well as derivatives with electron withdrawing fluorine groups on the eight pro-cata positions. These molecules are designed to investigate relationships between steric and electronic effects on the stability of pentacene toward endoperoxide formation via reaction with photosensitized oxygen in solution under conditions of ambient light (i.e., ‘laboratory’ conditions). It is evident from the study that stabilization through changes to the electronic characteristics of pentacene are more effective than the incorporation of sterically bulky groups at the acetylenic termini. Selected pentacene derivatives have been made into binary, amorphous films with the fullerene derivative PCBM to investigate the stability imparted by substituents against cycloaddition reactions. Overall, the introduction of steric protection through incorporation of Tr* groups is not an efficient strategy for enhancing persistence of pentacenes. Stabilization through fluorination proves successful for extending the lifetime of the pentacene derivatives by an order of magnitude in solution. Notably, the persistence of pentacene derivatives in solution can also be enhanced through the use ethereal solvents stabilized with butylated hydroxy toluene (BHT) and/or an increased number of trialkylsilyl groups as substituents.
- 10 July 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessSterically-Hindered Derivatives of Pentacene and Octafluoropentacene
6,13-Diethynylpentacene derivatives with sterically bulky substituents (Tr*, tris(3,5-di-tert-butylphenyl)methyl groups) appended to the ethynyl moieties at the 6- and 13-positions have been synthesized, as well as derivatives with electron withdrawing fluorine groups on the eight pro-cata positions. These molecules are designed to investigate relationships between steric and electronic effects on the stability of pentacene toward endoperoxide formation via reaction with photosensitized oxygen in solution under conditions of ambient light (i.e., ‘laboratory’ conditions). It is evident from the study that stabilization through changes to the electronic characteristics of pentacene are more effective than the incorporation of sterically bulky groups at the acetylenic termini. Selected pentacene derivatives have been made into binary, amorphous films with the fullerene derivative PCBM to investigate the stability imparted by substituents against cycloaddition reactions. Overall, the introduction of steric protection through incorporation of Tr* groups is not an efficient strategy for enhancing persistence of pentacenes. Stabilization through fluorination proves successful for extending the lifetime of the pentacene derivatives by an order of magnitude in solution. Notably, the persistence of pentacene derivatives in solution can also be enhanced through the use ethereal solvents stabilized with butylated hydroxy toluene (BHT) and/or an increased number of trialkylsilyl groups as substituents.
- 5 April 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (15) , 10875-10888
Controlling Interchromophore Coupling in Diamantane-Linked Pentacene Dimers To Create a “Binary” Pair
Two isomeric pentacene dimers, each linked by a diamantane spacer, have been synthesized. These dimers are designed to provide experimental evidence to support quantum mechanical calculations, which predict the substitution pattern on the carbon-rich diethynyldiamantane spacer to be decisive in controlling the interpentacene coupling. Intramolecular singlet fission (i-SF) serves as a probe for the existence and strength of the electronic coupling between the two pentacenes, with transient absorption spectroscopy as the method of choice to characterize i-SF. 4,9-Substitution of diamantane provides a pentacene dimer (4,9-dimer) in which the two chromophores are completely decoupled and that, following photoexcitation, deactivates to the ground state analogous to a monomeric pentacene chromophore. Conversely, 1,6-substitution provides a pentacene dimer (1,6-dimer) that exhibits sufficiently strong coupling to drive i-SF, resulting in correlated triplet M(T1T1) yields close to unity and free triplet (T1 + T1) yields of ca. 50%. Thus, the diamantane spacer effectively switches "on" or "off" the coupling between the chromophores, based on the substitution pattern. The binary control of diamantane contrasts other known molecular spacers designed only to modulate the coupling strength between two pentacenes.
- 5 April 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (15) , 10875-10888
Controlling Interchromophore Coupling in Diamantane-Linked Pentacene Dimers To Create a “Binary” Pair
Two isomeric pentacene dimers, each linked by a diamantane spacer, have been synthesized. These dimers are designed to provide experimental evidence to support quantum mechanical calculations, which predict the substitution pattern on the carbon-rich diethynyldiamantane spacer to be decisive in controlling the interpentacene coupling. Intramolecular singlet fission (i-SF) serves as a probe for the existence and strength of the electronic coupling between the two pentacenes, with transient absorption spectroscopy as the method of choice to characterize i-SF. 4,9-Substitution of diamantane provides a pentacene dimer (4,9-dimer) in which the two chromophores are completely decoupled and that, following photoexcitation, deactivates to the ground state analogous to a monomeric pentacene chromophore. Conversely, 1,6-substitution provides a pentacene dimer (1,6-dimer) that exhibits sufficiently strong coupling to drive i-SF, resulting in correlated triplet M(T1T1) yields close to unity and free triplet (T1 + T1) yields of ca. 50%. Thus, the diamantane spacer effectively switches "on" or "off" the coupling between the chromophores, based on the substitution pattern. The binary control of diamantane contrasts other known molecular spacers designed only to modulate the coupling strength between two pentacenes.
- Open Access
- 29 August 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 14 (35) , 7897-7902
Triplet Formation in a 9,10-Bis(phenylethynyl)anthracene Dimer and Trimer Occurs by Charge Recombination Rather than Singlet Fission
We present an experimental study investigating the solvent-dependent dynamics of a 9,10-bis(phenylethynyl)anthracene monomer, dimer, and trimer. Using transient absorption spectroscopy, we have discovered that triplet excited state formation in the dimer and trimer molecules in polar solvents is a consequence of charge recombination subsequent to symmetry-breaking charge separation rather than singlet fission. Total internal reflection emission measurements of the monomer demonstrate that excimer formation serves as the primary decay pathway at a high concentration. In the case of highly concentrated solutions of the trimer, we observe evidence of triplet formation without the prior formation of a charge-separated state. We postulate that this is attributed to the formation of small aggregates, suggesting that oligomers mimicking the larger chromophore counts in crystals could potentially facilitate singlet fission. Our experimental study sheds light on the intricate dynamics of the 9,10-bis(phenylethynyl)anthracene system, elucidating the role of solvent- and concentration-dependent factors for triplet formation and charge separation.
- 29 August 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 14 (35) , 7897-7902
Open AccessTriplet Formation in a 9,10-Bis(phenylethynyl)anthracene Dimer and Trimer Occurs by Charge Recombination Rather than Singlet Fission
We present an experimental study investigating the solvent-dependent dynamics of a 9,10-bis(phenylethynyl)anthracene monomer, dimer, and trimer. Using transient absorption spectroscopy, we have discovered that triplet excited state formation in the dimer and trimer molecules in polar solvents is a consequence of charge recombination subsequent to symmetry-breaking charge separation rather than singlet fission. Total internal reflection emission measurements of the monomer demonstrate that excimer formation serves as the primary decay pathway at a high concentration. In the case of highly concentrated solutions of the trimer, we observe evidence of triplet formation without the prior formation of a charge-separated state. We postulate that this is attributed to the formation of small aggregates, suggesting that oligomers mimicking the larger chromophore counts in crystals could potentially facilitate singlet fission. Our experimental study sheds light on the intricate dynamics of the 9,10-bis(phenylethynyl)anthracene system, elucidating the role of solvent- and concentration-dependent factors for triplet formation and charge separation.
- Open Access
- 2 May 2023
- Published by Wiley in Chemistry – A European Journal
- Vol. 29 (34) , e202300941
A CommonC2‐Symmetric 2,2’‐Biphenol Building Block and its Application in the Synthesis of (+)‐di‐epi‐Gonytolide A
A variety of biaryl polyketides exhibit remarkable bioactivities. However, their synthetic accessibility is often challenging. Herein, the enantioselective preparation and synthetic application of an axially chiral 2,2’‐biphenol building block is outlined that represents a common motif of these intriguing natural products. Based on the highly regioselective and scalable bromination of a phenol precursor, a coupling process by Lipshutz cuprate oxidation was developed. A copper‐mediated deracemization strategy proved to be superior to derivatization or kinetic resolution approaches. Key steps in the overall building block synthesis were rationalized through DFT studies. Utilizing the 2,2’‐biphenol, a highly diastereoselective five step synthesis of formerly unknown (+)‐di‐epi‐gonytolide A was developed, thus showcasing the building block's general potential for the synthesis of natural products and their derivatives. En route, the first enantioselective construction of a chromone dimer intermediate was established.
- 2 May 2023
- Published by Wiley in Chemistry – A European Journal
- Vol. 29 (34) , e202300941
Open AccessA CommonC2‐Symmetric 2,2’‐Biphenol Building Block and its Application in the Synthesis of (+)‐di‐epi‐Gonytolide A
A variety of biaryl polyketides exhibit remarkable bioactivities. However, their synthetic accessibility is often challenging. Herein, the enantioselective preparation and synthetic application of an axially chiral 2,2’‐biphenol building block is outlined that represents a common motif of these intriguing natural products. Based on the highly regioselective and scalable bromination of a phenol precursor, a coupling process by Lipshutz cuprate oxidation was developed. A copper‐mediated deracemization strategy proved to be superior to derivatization or kinetic resolution approaches. Key steps in the overall building block synthesis were rationalized through DFT studies. Utilizing the 2,2’‐biphenol, a highly diastereoselective five step synthesis of formerly unknown (+)‐di‐epi‐gonytolide A was developed, thus showcasing the building block's general potential for the synthesis of natural products and their derivatives. En route, the first enantioselective construction of a chromone dimer intermediate was established.