Nguyen Xuan Chiem
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nguyen Xuan Chiem has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Le Tran Thang
Controls, Automation in Production and Improvement of Technology Institute
4 shared publications - Nguyen Cong Binh Nguyen
Le Quy Don Technical University
2 shared publications - Thuy Xuan Pham
Department of Automation and Computing Techniques in the Institute of Control Engineering, Le Quy Don Technical University, Ha Noi, Viet Nam
2 shared publications - Alexander Dmitriyevich Lukyanov
Don State Technical University
1 shared publication - Bui Xuan Hai
Le Quy Don Technical University
1 shared publication - Can Van Sao
Department of Automation and Computing Techniques, Le Quy Don Technical University, Hanoi, Vietnam
1 shared publication
Latest Publications
- Open Access
- 1 March 2026
- Published by Institute of Advanced Engineering and Science in IAES International Journal of Robotics and Automation (IJRA)
- Vol. 15 (1) , 210-221
Modeling and simulation of an active quarter-car suspension system using a synergetic controller
This paper presents the modeling and simulation of an active quarter-car suspension system (AQCSS) designed to enhance operational performance and ride comfort across various road conditions. First, a dynamic quarter-car model was developed, incorporating all the components of AQCSS and road-induced stimuli, based on the Euler–Lagrange method. Subsequently, a synergetic controller is designed by selecting a manifold that meets the system’s technical requirements. The proposed controller ensures a balance between ride comfort and road-holding performance by leveraging this manifold design. This control framework enables flexible adjustment of the damping force in real time according to the system states and external excitations. The stability of the closed-loop system is rigorously established through Lyapunov analysis. Numerical simulations are carried out in MATLAB to assess the proposed control law by benchmarking it against a passive suspension configuration and a sliding mode control approach, thereby demonstrating its effectiveness.
- 1 March 2026
- Published by Institute of Advanced Engineering and Science in IAES International Journal of Robotics and Automation (IJRA)
- Vol. 15 (1) , 210-221
Open AccessModeling and simulation of an active quarter-car suspension system using a synergetic controller
This paper presents the modeling and simulation of an active quarter-car suspension system (AQCSS) designed to enhance operational performance and ride comfort across various road conditions. First, a dynamic quarter-car model was developed, incorporating all the components of AQCSS and road-induced stimuli, based on the Euler–Lagrange method. Subsequently, a synergetic controller is designed by selecting a manifold that meets the system’s technical requirements. The proposed controller ensures a balance between ride comfort and road-holding performance by leveraging this manifold design. This control framework enables flexible adjustment of the damping force in real time according to the system states and external excitations. The stability of the closed-loop system is rigorously established through Lyapunov analysis. Numerical simulations are carried out in MATLAB to assess the proposed control law by benchmarking it against a passive suspension configuration and a sliding mode control approach, thereby demonstrating its effectiveness.
- Open Access
- 2 January 2026
- Published by National Technical University Kharkiv Polytechnic Institute in Electrical Engineering & Electromechanics
- No. 1,p. 44-50
Finite-time robust position tracking control for DC motors under uncertain dynamics
Introduction. This study proposes a finite-time robust control law for position tracking of a DC motor under conditions of model uncertainty and external disturbances. The motor operates through a pulse-width modulation (PWM) unit and an H-bridge power circuit, aiming to achieve finite-time position tracking while minimizing the effects of model uncertainties and external disturbances. Problem. The main challenge lies in achieving accurate and rapid position and speed regulation for the DC motor while maintaining high performance, despite model inaccuracies and external disturbances. The goal of this paper is to design a robust finite-time position tracking control law for a DC motor based on the differential geometric approach, ensuring high tracking accuracy and control efficiency in the presence of disturbances and parameter uncertainties. Scientific novelty. The integration of finite-time control based on a virtual system, diffeomorphism transformation, and disturbance compensation introduces an innovative solution for DC motor position tracking under incomplete modeling and external perturbations. Methodology. The study employs the differential geometric method to construct a virtual system with finite-time characteristics and uses Lyapunov theory to prove global stability in the presence of uncertainties and disturbances. A finite-time virtual system is proposed after analyzing the incomplete dynamic model of the DC motor. Results. To validate the proposed approach, MATLAB simulations were conducted and compared with a conventional sliding mode controller. The results demonstrate improved settling time and robustness of the proposed method in DC motor position tracking. The findings confirm that the proposed controller provides intuitive and precise control, accurate position tracking, and enhanced performance regulation. It also exhibits strong robustness against model uncertainties and external disturbances. The practical value of the proposed method is considerable, as it offers a reliable and efficient position control scheme for DC motors using PWM. The method ensures precise position control and robust performance under varying conditions and external interferences, making it well-suited for real-world DC motor control applications. References 23, tables 1, figures 12.
- 2 January 2026
- Published by National Technical University Kharkiv Polytechnic Institute in Electrical Engineering & Electromechanics
- No. 1,p. 44-50
Open AccessFinite-time robust position tracking control for DC motors under uncertain dynamics
Introduction. This study proposes a finite-time robust control law for position tracking of a DC motor under conditions of model uncertainty and external disturbances. The motor operates through a pulse-width modulation (PWM) unit and an H-bridge power circuit, aiming to achieve finite-time position tracking while minimizing the effects of model uncertainties and external disturbances. Problem. The main challenge lies in achieving accurate and rapid position and speed regulation for the DC motor while maintaining high performance, despite model inaccuracies and external disturbances. The goal of this paper is to design a robust finite-time position tracking control law for a DC motor based on the differential geometric approach, ensuring high tracking accuracy and control efficiency in the presence of disturbances and parameter uncertainties. Scientific novelty. The integration of finite-time control based on a virtual system, diffeomorphism transformation, and disturbance compensation introduces an innovative solution for DC motor position tracking under incomplete modeling and external perturbations. Methodology. The study employs the differential geometric method to construct a virtual system with finite-time characteristics and uses Lyapunov theory to prove global stability in the presence of uncertainties and disturbances. A finite-time virtual system is proposed after analyzing the incomplete dynamic model of the DC motor. Results. To validate the proposed approach, MATLAB simulations were conducted and compared with a conventional sliding mode controller. The results demonstrate improved settling time and robustness of the proposed method in DC motor position tracking. The findings confirm that the proposed controller provides intuitive and precise control, accurate position tracking, and enhanced performance regulation. It also exhibits strong robustness against model uncertainties and external disturbances. The practical value of the proposed method is considerable, as it offers a reliable and efficient position control scheme for DC motors using PWM. The method ensures precise position control and robust performance under varying conditions and external interferences, making it well-suited for real-world DC motor control applications. References 23, tables 1, figures 12.
- 2 January 2026
- Published by Springer Nature
- p. 56-67
Robust Control for Line-Following Robots with Model Uncertainties and Dynamic Disturbances
- 2 January 2026
- Published by Springer Nature
- p. 56-67
Robust Control for Line-Following Robots with Model Uncertainties and Dynamic Disturbances
- 11 June 2025
- Published by Springer Nature in International Journal of Control, Automation, and Systems
- Vol. 23 (6) , 1829-1838
A Finite-time Controller Design Based on Strick-feedback System for Flexible Joint Manipulator
- 11 June 2025
- Published by Springer Nature in International Journal of Control, Automation, and Systems
- Vol. 23 (6) , 1829-1838
A Finite-time Controller Design Based on Strick-feedback System for Flexible Joint Manipulator
- Open Access
- 2 May 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Electrical Engineering & Electromechanics
- No. 3,p. 45-52
Adaptive finite-time synergetic control for flexible-joint robot manipulator with disturbance inputs
Introduction. In this paper, the adaptive finite time controller is designed for flexible-joint manipulator (FJM) to stabilize oscillations and track the desired trajectory based on synergetic control theory (SCT) under disturbance inputs. The problem of the proposed work consists in the development of a mathematical model of the flexible joint while ignoring the nonlinear components of the actuator and synthesizing the control law that ensures the system stability within a settling time. The aim of this study is to use finite-time synergetic controller to ensure the reduction of system tracking error, avoid vibration and achieve steady state in a certain time period. An adaptive synergetic law is developed to solve the problem of uncertainty in the mathematical model of the actuator of FJM and input disturbances. Methodology. First, based on SCT the finite-time controller is constructed via the functional equation of the first manifold. The control law is designed to ensure the movement of the closed-loop system from an arbitrary initial state into the vicinity of the desired attractive invariant manifold, that is, the target attracting manifold. Secondly, to adjust the control law online, an adaptive law is developed to estimate the disturbance acting on the input. Then, the Lyapunov function is used to prove that the system can be stabilized in a sufficiently small neighborhood of the origin within finite time under input disturbances. Novelty. The implemented controller is effective in ensuring stability over a given time, minimizing the jitter problem while maintaining tracking accuracy and system robustness in the presence of input noise. Results. Numerical simulation and experimental results are presented to illustrate the effectiveness of the proposed method. The research directions of the model were determined for the subsequent implementation of the results in experimental samples. References 25, table 1, figures 7.
- 2 May 2025
- Published by National Technical University Kharkiv Polytechnic Institute in Electrical Engineering & Electromechanics
- No. 3,p. 45-52
Open AccessAdaptive finite-time synergetic control for flexible-joint robot manipulator with disturbance inputs
Introduction. In this paper, the adaptive finite time controller is designed for flexible-joint manipulator (FJM) to stabilize oscillations and track the desired trajectory based on synergetic control theory (SCT) under disturbance inputs. The problem of the proposed work consists in the development of a mathematical model of the flexible joint while ignoring the nonlinear components of the actuator and synthesizing the control law that ensures the system stability within a settling time. The aim of this study is to use finite-time synergetic controller to ensure the reduction of system tracking error, avoid vibration and achieve steady state in a certain time period. An adaptive synergetic law is developed to solve the problem of uncertainty in the mathematical model of the actuator of FJM and input disturbances. Methodology. First, based on SCT the finite-time controller is constructed via the functional equation of the first manifold. The control law is designed to ensure the movement of the closed-loop system from an arbitrary initial state into the vicinity of the desired attractive invariant manifold, that is, the target attracting manifold. Secondly, to adjust the control law online, an adaptive law is developed to estimate the disturbance acting on the input. Then, the Lyapunov function is used to prove that the system can be stabilized in a sufficiently small neighborhood of the origin within finite time under input disturbances. Novelty. The implemented controller is effective in ensuring stability over a given time, minimizing the jitter problem while maintaining tracking accuracy and system robustness in the presence of input noise. Results. Numerical simulation and experimental results are presented to illustrate the effectiveness of the proposed method. The research directions of the model were determined for the subsequent implementation of the results in experimental samples. References 25, table 1, figures 7.
- Open Access
- 1 March 2025
- Published by Universitas Muhammadiyah Yogyakarta in Journal of Robotics and Control (JRC)
- Vol. 6 (2) , 677-685
Synthesis of Active Disturbance Rejection Controller via Extended State Observer Combined with LQR Controller for Two-Wheeled Line Tracking Robot
This paper presents a method of synthesizing control laws based on the LQR controller and ADRC method for a two-wheel differential line-following robot when the robot dynamics have uncertain factors. First, the mathematical model includes line-following kinematic and dynamic models. LQR controller is designed based on the linear model of the robot when coincident with the line. When the robot has uncertain factors such as model parameter uncertainty and impact noise, the LQR controller will not ensure the control quality of the system. To overcome this, two observers are designed to observe the linear velocity and angular velocity states of the robot. This ensures more complete and accurate information of the model states in the LQR control law. The effectiveness of the control law is demonstrated through numerical simulation results and compared with the LQR controller.
- 1 March 2025
- Published by Universitas Muhammadiyah Yogyakarta in Journal of Robotics and Control (JRC)
- Vol. 6 (2) , 677-685
Open AccessSynthesis of Active Disturbance Rejection Controller via Extended State Observer Combined with LQR Controller for Two-Wheeled Line Tracking Robot
This paper presents a method of synthesizing control laws based on the LQR controller and ADRC method for a two-wheel differential line-following robot when the robot dynamics have uncertain factors. First, the mathematical model includes line-following kinematic and dynamic models. LQR controller is designed based on the linear model of the robot when coincident with the line. When the robot has uncertain factors such as model parameter uncertainty and impact noise, the LQR controller will not ensure the control quality of the system. To overcome this, two observers are designed to observe the linear velocity and angular velocity states of the robot. This ensures more complete and accurate information of the model states in the LQR control law. The effectiveness of the control law is demonstrated through numerical simulation results and compared with the LQR controller.
- Open Access
- 13 December 2024
- Published by Peneliti Teknologi Teknik Indonesia in Control Systems and Optimization Letters
- Vol. 3 (1) , 14-19
Cascade Control for Trajectory-Tracking Mobile Robots Based on Synergetic Control Theory and Lyapunov Functions
This paper aims to synthesize a synergetic control law using a cascade approach for trajectory-tracking robots. A nonlinear model was established for a differential two-wheeled mobile robot. The robot’s operation can either stabilize along a desired trajectory or deviate due to model uncertainty and external disturbances. The cascade approach is utilized to reduce system complexity while maintaining the robustness of the control law. The kinematic control law in the outer loop is designed using Lyapunov functions, while the dynamic control law is derived using synergetic control theory. This law ensures system control quality under model uncertainties and external disturbances. Finally, simulation results demonstrate that the proposed controller provides robust stability for the mobile robot, along with excellent disturbance rejection and robustness against model uncertainties.
- 13 December 2024
- Published by Peneliti Teknologi Teknik Indonesia in Control Systems and Optimization Letters
- Vol. 3 (1) , 14-19
Open AccessCascade Control for Trajectory-Tracking Mobile Robots Based on Synergetic Control Theory and Lyapunov Functions
This paper aims to synthesize a synergetic control law using a cascade approach for trajectory-tracking robots. A nonlinear model was established for a differential two-wheeled mobile robot. The robot’s operation can either stabilize along a desired trajectory or deviate due to model uncertainty and external disturbances. The cascade approach is utilized to reduce system complexity while maintaining the robustness of the control law. The kinematic control law in the outer loop is designed using Lyapunov functions, while the dynamic control law is derived using synergetic control theory. This law ensures system control quality under model uncertainties and external disturbances. Finally, simulation results demonstrate that the proposed controller provides robust stability for the mobile robot, along with excellent disturbance rejection and robustness against model uncertainties.
- Open Access
- 25 October 2023
- Published by ASCEE Publications in International Journal of Robotics and Control Systems
- Vol. 4 (1) , 174-187
Synthesis of Adaptive Sliding Mode Control for Twin Rotor MIMO System with Mass Uncertainty based on Synergetic Control Theory
In this paper, the authors present a new method to synthesize an adaptive sliding controller for Twin Rotor MIMO System (TRMS) based on Synergetic Control Theory (SCT). This system represents a prototype of a helicopter with two degrees of freedom and is widely used in automatic control laboratories. The complexity of the control problem is due to the nonlinear cross-coupling between the main and tail rotors. Uncertainty in system parameters further increases the complexity of the control problem. In Synergetic Control Theory, manifolds are designed for each channel. The control law is found based on sequential manifolds and the Analytical Design of Aggregated Regulators (ADAR) method. The adaptive law when the parameters are uncertain is given based on the analysis of system stability thanks to the Lyapunov function of the first manifold. Finally, the effectiveness of the proposed controller is demonstrated by numerical simulation results and comparison with conventional Sliding Mode Control (SMC).
- 25 October 2023
- Published by ASCEE Publications in International Journal of Robotics and Control Systems
- Vol. 4 (1) , 174-187
Open AccessSynthesis of Adaptive Sliding Mode Control for Twin Rotor MIMO System with Mass Uncertainty based on Synergetic Control Theory
In this paper, the authors present a new method to synthesize an adaptive sliding controller for Twin Rotor MIMO System (TRMS) based on Synergetic Control Theory (SCT). This system represents a prototype of a helicopter with two degrees of freedom and is widely used in automatic control laboratories. The complexity of the control problem is due to the nonlinear cross-coupling between the main and tail rotors. Uncertainty in system parameters further increases the complexity of the control problem. In Synergetic Control Theory, manifolds are designed for each channel. The control law is found based on sequential manifolds and the Analytical Design of Aggregated Regulators (ADAR) method. The adaptive law when the parameters are uncertain is given based on the analysis of system stability thanks to the Lyapunov function of the first manifold. Finally, the effectiveness of the proposed controller is demonstrated by numerical simulation results and comparison with conventional Sliding Mode Control (SMC).
- Open Access
- 1 September 2023
- Published by Universitas Muhammadiyah Yogyakarta in Journal of Robotics and Control (JRC)
- Vol. 4 (5) , 662-669
Synthesis of LQR Controller Based on BAT Algorithm for Furuta Pendulum Stabilization
In this study, a controller design method based on the LQR method and BAT algorithm is presented for the Furuta pendulum stabilization system. Determine the LQR controller, it is often based on the designer's experience or using trial and error to find the Q, R matrices. The BAT search algorithm is based on the characteristics of the bat population in the wild. However, there are advantages to finding multivariate objective functions. The BAT algorithm has an improvement for the LQR controller to optimize the linear square function with fast response time, low energy consumption, overshoot, and a small number of oscillations. Swarm optimization algorithms have advantages in finding global extrema of multivariate functions. Therefore, with a large number of elements of the Q and R matrices, they can also be quickly found and these matrices still satisfy the Riccati equation. The controller with optimal parameters is verified through simulation results with different scenarios. The performance of the proposed controller is compared with a conventional LQR controller and implemented on a real system.
- 1 September 2023
- Published by Universitas Muhammadiyah Yogyakarta in Journal of Robotics and Control (JRC)
- Vol. 4 (5) , 662-669
Open AccessSynthesis of LQR Controller Based on BAT Algorithm for Furuta Pendulum Stabilization
In this study, a controller design method based on the LQR method and BAT algorithm is presented for the Furuta pendulum stabilization system. Determine the LQR controller, it is often based on the designer's experience or using trial and error to find the Q, R matrices. The BAT search algorithm is based on the characteristics of the bat population in the wild. However, there are advantages to finding multivariate objective functions. The BAT algorithm has an improvement for the LQR controller to optimize the linear square function with fast response time, low energy consumption, overshoot, and a small number of oscillations. Swarm optimization algorithms have advantages in finding global extrema of multivariate functions. Therefore, with a large number of elements of the Q and R matrices, they can also be quickly found and these matrices still satisfy the Riccati equation. The controller with optimal parameters is verified through simulation results with different scenarios. The performance of the proposed controller is compared with a conventional LQR controller and implemented on a real system.