MKMaria Kiba

Maria Kiba

*This is an algorithmically generated author record based on publicly available information.

Maria Kiba has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • METHOD OF EVALUATING QUALITY OF MIXING SOLUTIONS POLYMER COMPOSITES

    by Lipetsk State Technical University, Roman Li, Maria Kiba, Saint Petersburg Mining University, Yulia Li, Alexey Komolikov

    Known photometric methods for assessing the mixing quality of polymer composite solutions are unsuitable for monitoring polymer solutions filled with white particles. A new method for assessing the mixing quality of components in a polymer solution for filler particles of any color is proposed. This method is based on measuring the resistance of polymer composite solutions. The distribution of filler particles in the polymer solution, which correlates with the electrical resistance of the composite solution, is considered as an evaluation criterion for mixing quality. The method includes: measuring the electrical resistance of the polymer nanocomposite solution and calculating the specific volume electrical resistance; determining the average specific electrical resistance of the polymer nanocomposite solution and comparing it with the minimum rejection level on a calibration graph. It has been established that the electrical resistance of the composite solution will be maximum with a uniform distribution of dielectric particles throughout the solution. If these particles are unevenly distributed, or if aggregates occur, this will lead to current flow through the polymer solution and a decrease in electrical resistance. The electrical resistance of the composite solution will be significantly lower than with a uniform distribution. The opposite is true for a polymer solution filled with electrically conductive particles. It has been determined that the mixing quality is satisfactory if the following conditions are met: a) for dielectric particles, the average value of the measured specific volume electrical resistance should be no less than the minimum rejection level; b) for conductor particles, no greater than the minimum rejection level.

  • Unsharp masking for improved quality images taken in mines

    by Ekaterina V. Zaytseva, Alina A. Kochneva, Evgenii V. Katuntsov, Maria R. Kiba

    Dispatchers in mines and mining areas receive information from CCTV cameras in real time. To enhance the quality of the images received and make the right decisions based on them, it is necessary to apply global methods of digital image processing in conditions of limited information availability. The article analyzes application of the unsharp masking method using a moving average filter with various apertures from 3 to 25. Histograms of the brightness distribution are given for the resulting video frames. The quantitative characteristics, i.e. the average brightness, Tenengrad values, sharpness, allow us to draw a conclusion about the use of a particular filter mask or changing the filter aperture. Analysis of the quantitative characteristics showed the viability of using unsharp masking with apertures up to 13 in general conditions, and up to 9 in conditions of limited information availability. The unsharp masking method was compared with the high-frequency filtering method. The Tenengrad's quantitative characteristics and the sharpness values have shown their efficiency in analyzing the video frame quality. Visual analysis of the video image and the Tenengrad quantitative values and the sharpness values coincide. The use of the unsharp masking method will allow the dispatcher to make efficient decisions based on the informative video data.

  • THERMOPHYSICAL PROPERTIES OF ELASTOMERIC NANOCOMPOSITE FILLED WITH CERAMIC NANOPARTICLES

    by Lipetsk State Technical University, Roman Li, Dmitry Psarev, Michurinsky State Agrarian University, Maria Kiba, Saint Petersburg Mining University, Alexey Komolikov

    Thermophysical properties of polymer fit in restored bearing units of automotive and tractor equipment are the most important characteristics determining its suitability for use under operating conditions. Metallic dispersed nanoparticles and carbon nanotubes used as fillers allow to significantly improve the thermophysical properties of elastomers and thermosets. Thermophysical properties of F-40S elastomer composites filled with ceramic nanoparticles in a volume fraction of 0.00156; 0.00311 and 0.00466 are studied in the work. The thermal conductivity coefficient increases by more than an order of magnitude: from 0.4 to 5.7 W/m‧K when filling the elastomer with ceramic nanoparticles in the optimal concentration (0.0031) The Burger formula is recommended for calculating the thermal conductivity of elastomers filled with ceramic nanoparticles, it is recommended The discrepancy between the calculated values of the thermal conductivity coefficient and the actual values does not exceed 2.5%. Filling the elastomer with ceramic nanoparticles increases the heat resistance of the material. The decrease in the strength of the nanocomposite after thermal aging is less intense than that of the elastomer: the aging coefficient for strength is 0.71, while that of the elastomer is 0.63. The effect of thermal aging on the change in deformation is similar: the aging coefficient for deformation of the composite is 0.37, and that of the elastomer is 0.31. Filling the elastomer with ceramic nanoparticles in the optimal concentration increases the thermal conductivity coefficient by 14.25 times. Aluminum oxide nanoparticles are inhibitors of thermal oxidation of butadiene-nitrile rubber SKN-40 and increase the thermal resistance of the F-40S elastomer: the aging coefficients for strength increase by 1.13 times, for deformation by 1.19 times.

  • Assessment of the Influence of the Color Temperature of Radiation Sources on the Quality of Digital Images Obtained in Mines

    by Ekaterina V. Zaytseva, Alina A. Kochneva, Evgeny V. Katuntsov, Maria R. Kiba, Oksana M. Romakina

    This paper considers the application of the least-squares method to calculate polynomial approximation coefficients for the relative spectral sensitivity curves of “light-signal” matrices. The obtained coefficients were used to calculate the radiation utilization factors for the color components R, G, and B. The obtained results showed the interdependence between the color temperature of the radiation sources and the quality of the digital images formed. The calculations were performed for industrial video cameras of SSP-MVCA series. It is intended to use the results obtained to design lighting systems for mines and mine workings. Directions for further research in the field of technical vision in the mining industry are indicated, concerning quantitative indicators of the quality of imaging devices and shooting conditions, such as illumination and sensitivity. An analysis of video cameras main characteristics was carried out, taking into account the peculiarities of filming in the production process and the selection conditions of the optimal mode of the video camera operation. The dependencies for calculating the quantitative characteristics of video cameras for video surveillance in mines have been clarified.

  • METHOD FOR CALCULATING THE OPTIMAL DISPERSION MODE OF SOLUTIONS POLYMER COMPOSITES IN TURBINE MIXER

    by Lipetsk State Technical University, Roman Li, Maria Kiba, Saint Petersburg Mining University, Victor Erokhin, Marat Klebleev, Michurinsk State Agrarian University

    LSTU has developed a turbine stirrer for mixing and dispersing solutions of polymer nanocomposites designed to restore mounting holes in the body parts of equipment. Formula is proposed for calculation of optimal rotation frequency of turbine mixer, which takes into account structural parameters of mixer and physical properties of nanoparticles, which provides effective mixing of nanoparticles of filler in solution of nanocomposite. An experiment was carried out to assess the adequacy of a mathematical model of the turbine stirrer speed. Experimental turbine agitators of three different sizes were used in the experiment. A solution of elastomer nanocomposite F-40S was used for mixing. The dispersion quality was evaluated by the light transmission coefficient. For each turbine stirrer size, experimental non-linear dependences of the transmittance on the stirrer speed were obtained. After approximation of experimental dependences and taking partial derivatives, their extremes are determined, i.e. actual optimal rotation frequencies for each mixer size: n оф1 = 1325 min-1; nof2 = 1113 min-1;, nof3 = 973 min-1. Then the power consumed by stirrers of various sizes at a speed of 500, 1000 and 1500 min-1 was measured. Further, the values of the circumferential velocity coefficients k were calculated for each stirrer using the measured power values. As the stirrer diameter increases from 34 to 90 mm, the corresponding circumferential velocity factor k increases from 0.9534 to 0.9703, indicating an increase in circumferential flow.Further, according to the proposed formula, using the values of the coefficients of peripheral speeds, the calculated values of the optimal speed for stirrers No. 1, No. 2 and No. 3 were obtained: n op1 = 1307 min-1; nop2 = 1100 min-1;, nop3 = 965 min-1. Analysis of variance showed that the calculated Fischer value does not exceed the table value, which confirms the adequacy of the formula for calculating the optimal speed of the turbine stirrer.

  • Open Access

    Роль школьной олимпиады по информатике в поступлении в высшие учебные заведения

    by Maria Romanovna Kiba, Mikhail Yurevich Timohin

    Целью статьи был анализ олимпиад школьников по информатике за всю историю их существования. В статье рассмотрена история олимпиадного движения с 1985 года по настоящее время. Проанализированы существенные изменения, которым подвергся процесс поступления в высшие учебные заведения с введением обязательного единого государственного экзамена, прошедшей пандемии, как изменялась структура контингента и проходные баллы на направления, связанные с информационными технологиями. Приведены наглядные примеры изменения количества контингента, а также изменения качества за последние годы. Указаны российские олимпиады по информатике, входящие в перечень, рекомендуемых олимпиад Российским союзом олимпиад школьников и министерством просвещения, чем они отличаются и как зависит количество привлекаемых участников от условий олимпиады. Приведены статистические выкладки по количеству участников на примере олимпиады «Гранит науки» по профилю информатика за последние годы, и каким образом влияет на олимпиаду формат проведения. Рассмотрены условия задач за последние 38 лет, а также условия, в которых были организованы олимпиады, и какая мотивация была у участников разных лет. Предложены дальнейшие перспективы развития олимпиады школьников по информатике и ее влияние на профессиональный уровень подготовки будущих специалистов в предметной области, формирование контингента в высших учебных заведениях и популярности информационных технологий в Российской Федерации как ведущего направления подготовки квалифицированных кадров. The purpose of the article was to analyze Olympiads for schoolchildren in computer science throughout the history of their existence. The article examines the history of the Olympic movement from 1985 to the present. The significant changes that the process of admission to higher education institutions underwent with the introduction of the mandatory unified state exam, the pandemic, how the structure of the contingent and passing scores in areas related to information technology changed. Illustrative examples of changes in the number of contingents, as well as changes in quality in recent years, are given. The Russian Olympiads in Informatics included in the list of Olympiads recommended by the Russian Union of Olympiads for Schoolchildren and the Ministry of Education are indicated, how they differ and how the number of participants involved depends on the conditions of the Olympiad. Statistical calculations are given on the number of participants using the example of the “Granite Science” Olympiad in the field of computer science in recent years, and how the format of the Olympiad affects it. The conditions of the tasks over the past 38 years are considered, as well as the conditions in which the Olympiads were organized, and what motivation the participants had in different years. Further prospects for the development of the Olympiad for schoolchildren in computer science and its impact on the professional level of training of future specialists in the subject area, the formation of a contingent in higher educational institutions and the popularity of information technology in the Russian Federation as a leading direction in the training of qualified personnel are proposed.


  • MODELING AND CALCULATION OF DESIGN AND OPERATING PARAMETERS TURBINE MIXER FOR SOLUTION DISPERSION POLYMER COMPOSITES

    by Lipetsk State Technical University, Roman Li, Maria Kiba, St. Petersburg Mining University, Ilkhom Toirov, Karshi Engineering and Economic Institute, Victor Erohin, Igor Lisovy

    Mixers with technical characteristics established by GOST 20680-2002 are not suitable for mixing solutions of polymer nanocomposites when restoring bearing fits. The optimal design parameters of a multi-bladed turbine mixer with full-length inclined blades for mixing solutions of polymer nanocomposites were determined at the Lipetsk State Technical University. Formulas for calculating the pumping effect and power when designing multi-blade turbine mixers of various sizes are obtained using these parameters. The average value of the peripheral speed coefficient, which is k≈0.92, was determined experimentally. A formula for calculating power when designing multi-blade turbine mixers of various standard sizes with full-length inclined blades is proposed. The experiment showed a high convergence of calculated and actual values of power consumed by a turbine mixer when mixing nanocomposite solutions. An experiment was carried out to evaluate and select a similarity criterion for the design of multi-bladed turbine mixers of various standard sizes. Reynolds and Froude similarity criteria were studied. The light transmission coefficient of the solution after stirring at a rotation frequency determined by the Reynolds criterion is Kc=57%. A similar parameter of the solution after treatment in the mode determined by the Froude criterion is 2.2 times lower and amounts to Kc = 26%. A higher quality index according to the Froude criterion is confirmed by the fact that the strength of the samples is σ = 27.308 MPa, which is 1.24 times greater than the strength of samples obtained from nanocomposite solutions processed in the mode determined by the Reynolds criterion. A formula for calculating the power of multi-bladed turbine mixers with inclined blades was proposed as a result of the research. Modeling of the design and operating parameters of multi-blade turbine mixers of various standard sizes should be carried out according to the Froude criterion.

  • Open Access

    THE USE OF COMPOSITE MATERIALS IN PASSIVE AND ACTIVE SAFETY OF AUTOMOBILE

    by Petr A. Kiba, Maria R. Kiba

    The article deals with the relevance of using composite materials of biological and synthetic origin in the elements of passive and active safety of the car. The topic of road safety is still topical, as cars are becoming more and more every year. The safety characteristics of vehicles should improve and environmental pollution should be reduced. To achieve these goals, various approaches of using composite materials in car body elements have been proposed. In addition to safety features, composite materials also reduce the weight of the vehicle. Such a vehicle picks up speed faster and consumes less fuel, reducing environmental pollution. Using the example of a Porsche car, parts made entirely and with carbon fiber are examined. A summary of the further use of the technology in the country and the world is given. The purpose is to show the importance of using composite materials in active and passive safety elements of the car. Method and methodology of the work. Theoretical analysis and generalization of scientific and technical literature in the context of research into the prospectivity of the use of composite materials in the automotive industry. Results. According to the conducted research and practical experience examples are given in which areas of automobile construction composite materials can be used. Scope of application of the results. The results can be used in the design and development of passive and active safety elements.

  • OPTIMIZATION OF 3-D MODE PRINTING OF TURBINE STIRRER FOR DISPERSING SOLUTIONS POLYMER COMPOSITES

    by Lipetsk State Technical University, Roman Li, Maria Kiba, Dmitry Grebenkov, Viktor Erokhin

    The design of the turbine stirrer is characterized by a rather complex shape of working surfaces and during its manufacture by traditional methods unique molds are required for each type of stirrer, increased material and labor costs are required. The use of 3D printing allows you to obtain products with a complex surface configuration, with minimal costs and which do not require subsequent machining. Analysis was carried out and selection of 3D printing type and material of turbine stirrer intended for mixing of elastomeric nanocomposite solutions components was carried out. FDM (Fused Deposition Modeling) is the most suitable type of 3D printing for solving design and technological problems in the manufacture of turbine stirrers. Plastics of the brands ABS, PLA and PETG have become very widespread in this type of 3D printing. The highest mechanical properties, chemical resistance and the lowest price of the materials under consideration are PETG plastic, which was chosen for the manufacture of a turbine stirrer designed to mix and disperse solutions of elastomeric nanocomposites. An active experiment was implemented according to the В2 plan. The samples are PETG plastic plates printed on a Flying Bear Ghost 5 3D printer. The main mode parameters of 3D printing by FDM type, which determine the strength of samples and printing performance, are: the number of concentric lines that make up the wall of the printed product and the line width. A regression model of the dependence of strength of samples made of PETG plastic on the number and width of lines in 3D printing was obtained. The optimal 3D printing mode of the turbine stirrer is set, providing high strength of the product and performance of the technology.

  • OPTIMIZATION OF DESIGN AND REGIME DATA THE TURBINE MIXER FOR DISPERSION OF SOLUTIONS POLYMERIC COMPOSITES

    by Lipetsk State Technical University, Roman Li, Maria Kiba, St. Petersburg Mining University, Dmitry Grebenkov, Viktor Erokhin

    The use of polymer composites in the restoration of worn-out body parts of agricultural machinery significantly increases their post-repair life and leads to significant savings in material resources during repair. The composite should have high mechanical and thermophysical properties, which is possible provided that the filler particles are evenly distributed in the volume of the solution. Aggregation of particles, their non-uniform distribution in the polymer solution significantly impairs the performance of the material. Mechanical mixing and dispersion of polymer composite solutions using agitators is a promising treatment method that improves the consumer properties of the material. Theoretical studies were carried out and, taking into account the physical properties of the elastomeric nanocomposite solution, the design of the open turbine stirrer was chosen. It has been found that when developing a device with a stirrer, the effect of the design parameters of the stirrer on the power consumed by the device on the mixing of components, as well as the quality of mixing and dispersion of the polymer composite solution should be taken into account. The effect of the design parameters of the stirrer on the power consumption was analyzed and the design parameters of the stirrer were determined. An active experiment according to the plan was implemented V2 in which the response function took the estimated parameter of the mixing quality of the light transmission coefficient, and the factors of the inclination angle of the stirrer blade and its rotation frequency. A regression model in the form of a second-order polynomial was obtained and its optimization was carried out. The optimal design and operating parameters of the stirrer have been established, which ensure the highest quality of mixing solutions. Based on the results of the studies, the design of an open, turbine stirrer for mixing nanocomposite solutions was developed.