Cenwei Shi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Cenwei Shi has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Chun Gan
School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan, China
2 shared publications - Jianhua Wu
Department of Electrical Engineering, Zhejiang University, Hangzhou, Zhejiang China
2 shared publications - Qingguo Sun
State Key Laboratory of Smart Power Distribution Equipment and System, Hebei University of Technology, Tianjin, China
2 shared publications - Yihua Hu
Dalian University of Technology
2 shared publications - Lin Peng
College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China
1 shared publication - Tingna Shi
College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China
1 shared publication
Latest Publications
- Open Access
Analytical Modeling and Analysis of Permanent-Magnet Motor with Demagnetization Fault
Factors such as insufficient heat dissipation and excessively high temperature can easily lead to demagnetization of the PMs in permanent-magnet (PM) motors. As a result, the magnetic field distribution of the motor will not be uniform, producing fault harmonics and lowering the operational performance of the motor. An essential stage in the diagnosis of faults and the monitoring of motor condition is the establishment of an accurate model of motors with demagnetization faults. In this paper, demagnetization faults are modeled by changing the Fourier coefficients in the Fourier expansion of the magnetization of PMs. This model can be used to determine the motor performance under various types of demagnetization, including radial air gap flux density, back electromotive force (EMF), and torque. On this basis, the corresponding relationship between the demagnetization degree and the fault signature is established, to provide a theoretical foundation for the subsequent demagnetization fault diagnosis. The finite element analysis (FEA) verifies the effectiveness and superiority of the proposed analytical model. The modeling method proposed in this paper can be applied to PM motors with PMs having different magnetization directions and shapes because it is based on the demagnetization region of PMs.
Open AccessAnalytical Modeling and Analysis of Permanent-Magnet Motor with Demagnetization Fault
Factors such as insufficient heat dissipation and excessively high temperature can easily lead to demagnetization of the PMs in permanent-magnet (PM) motors. As a result, the magnetic field distribution of the motor will not be uniform, producing fault harmonics and lowering the operational performance of the motor. An essential stage in the diagnosis of faults and the monitoring of motor condition is the establishment of an accurate model of motors with demagnetization faults. In this paper, demagnetization faults are modeled by changing the Fourier coefficients in the Fourier expansion of the magnetization of PMs. This model can be used to determine the motor performance under various types of demagnetization, including radial air gap flux density, back electromotive force (EMF), and torque. On this basis, the corresponding relationship between the demagnetization degree and the fault signature is established, to provide a theoretical foundation for the subsequent demagnetization fault diagnosis. The finite element analysis (FEA) verifies the effectiveness and superiority of the proposed analytical model. The modeling method proposed in this paper can be applied to PM motors with PMs having different magnetization directions and shapes because it is based on the demagnetization region of PMs.
- 12 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (3) , 2608-2621
MMC-Based SRM Drives With Decentralized Battery Energy Storage System for Hybrid Electric Vehicles
This paper proposes a modular multilevel converter (MMC)-based switched reluctance motor (SRM) drive with decentralized battery energy storage system (BESS) for hybrid electric vehicle (HEV) applications. In the proposed drive, a battery cell and a half-bridge converter is connected as a submodule (SM), and multiple SMs are connected together for the MMC. The modular full-bridge converter is employed to drive the motor. Flexible charging and discharging functions for each SM are obtained by controlling switches in SMs. Multiple working modes and functions are achieved. Compared to conventional and existing SRM drives, there are several advantages for the proposed topology. A lower dc bus voltage can be flexibly achieved by selecting SM operation states, which can dramatically reduce the voltage stress on the switches. Multilevel phase voltage is obtained to improve the torque capability. Battery state-of-charge (SOC) balance can be achieved by independently controlling each SM. Flexible fault-tolerance ability for battery cells is equipped. The battery can be flexibly charged in both running and standstill conditions. Furthermore, completely modular structure is achieved by using standard half-bridge modules, which is beneficial for market mass production. Experiments carried out on a three-phase 12/8 SRM confirm the effectiveness of the proposed SRM drive.
- 12 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (3) , 2608-2621
MMC-Based SRM Drives With Decentralized Battery Energy Storage System for Hybrid Electric Vehicles
This paper proposes a modular multilevel converter (MMC)-based switched reluctance motor (SRM) drive with decentralized battery energy storage system (BESS) for hybrid electric vehicle (HEV) applications. In the proposed drive, a battery cell and a half-bridge converter is connected as a submodule (SM), and multiple SMs are connected together for the MMC. The modular full-bridge converter is employed to drive the motor. Flexible charging and discharging functions for each SM are obtained by controlling switches in SMs. Multiple working modes and functions are achieved. Compared to conventional and existing SRM drives, there are several advantages for the proposed topology. A lower dc bus voltage can be flexibly achieved by selecting SM operation states, which can dramatically reduce the voltage stress on the switches. Multilevel phase voltage is obtained to improve the torque capability. Battery state-of-charge (SOC) balance can be achieved by independently controlling each SM. Flexible fault-tolerance ability for battery cells is equipped. The battery can be flexibly charged in both running and standstill conditions. Furthermore, completely modular structure is achieved by using standard half-bridge modules, which is beneficial for market mass production. Experiments carried out on a three-phase 12/8 SRM confirm the effectiveness of the proposed SRM drive.
- 27 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (2) , 1526-1539
A Universal Two-Sensor Current Detection Scheme for Current Control of Multiphase Switched Reluctance Motors With Multiphase Excitation
In this paper, a universally two-sensor current detection scheme is proposed for the current control of different multiphase SRMs under multiphase excitation. In the proposed scheme, only two current sensors are utilized to separate the phase currents by selecting the currents flowing through each sensor, and detect the excitation current flowing through the lower switch of each phase. The current overlapping states are analyzed for SRM drives with different phase numbers. Compared to existing schemes, the proposed method is applicable for all three-phase, four-phase, five-phase, and six-phase drives, without external circuits and any changes in converter topologies, which is much easier to implement. For three-phase and four-phase SRM drives, the phase currents can be simply calculated from the two sensor currents, without pulse injection and voltage penalty, which improves the sampling accuracy and system performance. Furthermore, with the proposed scheme, the five-phase and six-phase systems can be both equivalent to two independent single-sensor systems, where all the phase currents can also be obtained by employing pulse injection. Therefore, it provides a promising solution to phase current detection for different SRMs with multiphase excitation by using only two current sensors. Simulation and experimental results are provided to verify the proposed schemes.
- 27 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (2) , 1526-1539
A Universal Two-Sensor Current Detection Scheme for Current Control of Multiphase Switched Reluctance Motors With Multiphase Excitation
In this paper, a universally two-sensor current detection scheme is proposed for the current control of different multiphase SRMs under multiphase excitation. In the proposed scheme, only two current sensors are utilized to separate the phase currents by selecting the currents flowing through each sensor, and detect the excitation current flowing through the lower switch of each phase. The current overlapping states are analyzed for SRM drives with different phase numbers. Compared to existing schemes, the proposed method is applicable for all three-phase, four-phase, five-phase, and six-phase drives, without external circuits and any changes in converter topologies, which is much easier to implement. For three-phase and four-phase SRM drives, the phase currents can be simply calculated from the two sensor currents, without pulse injection and voltage penalty, which improves the sampling accuracy and system performance. Furthermore, with the proposed scheme, the five-phase and six-phase systems can be both equivalent to two independent single-sensor systems, where all the phase currents can also be obtained by employing pulse injection. Therefore, it provides a promising solution to phase current detection for different SRMs with multiphase excitation by using only two current sensors. Simulation and experimental results are provided to verify the proposed schemes.