CKCharalampos Kosptopoulos

Charalampos Kosptopoulos

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Charalampos Kosptopoulos has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Progress on European ITER Toroidal Field Coil Procurement: Cold Test and Insertion Work Package

    by Boris Bellesia, Robert Harrison, Angela Hernandez, Marc Jimenez, Sebastien Koczorowski, Charalampos Kosptopoulos, Ken Libens, Alessandro Lo Bue, Cesar Luongo, Edoardo Pompa, et al.

    The plasma confinement of the International Tokamak Experimental Reactor (ITER) is provided by the magnetic field generated by 18 toroidal field coils. Fusion for Energy, the European Domestic Agency for ITER, is responsible for the supply of 10 TFC to ITER project. Their procurement has been divided into three main work packages: I) the production of the radial plates, structural stainless steel components housing the Nb3Sn conductors, II) the manufacture of 10 Winding Packs (WP) and III) the cold test of 10 WP plus their insertion into the Coil Cases. This article gives an update of the status of the production of the third and last work package performed under the framework of an F4E contract assigned to SIMIC SpA, an Italian company. In particular, the details of the WP thermal cycle, the insertion of the firsts TF coil in their coil cases, the closure weld, the gap filling and the machining strategy adopted to optimize the final TF coil shape optimized to minimize the field errors are presented.


  • F4E Procurement of the Pre-Compression Rings Made of Pultruded Composite Material

    by Eva Boter, Angela Hernandez, Alessandro Bonito-Oliva, Thierry Boutboul, Maria-Paz Casas Lino, Samuli Heikkinen, Marc Jimenez, Charalampos Kostopoulos, Ken Libens, Narcis Pellicer, et al.

    The highly innovative process, proposed by CNIM and chosen by F4E, is based on a pultrusion technique that involves the manufacture of profiles of epoxy S2-glass. Each precompression ring (PCR) is manufactured by winding the flat pultruded profile (2 mm thick and about 2800 m long) and utilizing an adhesive tape (0.12 mm thick) between layers to freeze the geometry. After the curing cycle, the PCR is machined to reach the required geometry tolerances. Each PCR will have a diameter of approximately 5 m, a cross-section of 332 mm x 288 mm and will weigh approximately 3 tons. The PCRs will finally be proof tested at 600 MPa in hoop stress that corresponds to 1.5 time the operational hoop stress.